83 models
This holder is designed for the Dremel model 395, which has a ~47mm round body in the clamp area. The front mount is slightly tapered inside to allow the Dremel motor to just be slipped into the front mount until snug, and then close the…
Print approx. €2.67–€3.26 excl. taxPreliminary estimate for PETGSource material: PET
This holds the 7 Wera Wrenches in place. Distance of 5mm mounting holes is 45mm from hole to hole. PLA or PETG with 15% infill and 0.2mm layer height will do the job, print orientation as ist comes from the STL file. For the IKEA Skadis…
Print approx. €5.43–€6.63 excl. taxPreliminary estimate for PETGSource material: PET
Use this adapter to mount your Dremel type 395 rotary tool to an AXA tool holder for fitment onto an AXA tool post. The design does not require additional hardware, but rather clamps the dremel as the tool holder screws are tightened. I…
Print approx. €3.40–€4.16 excl. taxPreliminary estimate for one variant
Replacment for Electrical Box Clip A6395450073. In case one of yours broke or went missing. Print in PETG or ABS to ensure temperature resistance.
Print approx. €0.58–€0.70 excl. taxPreliminary estimate for PETGSource material: PET
Inspired by the following: https://www.printables.com/model/106585-wera-wrenches-395-ho7-sm-wall-mount-ikea-skadis-pe https://www.printables.com/model/139416-wera-scredriver-holder-for-workshop
Print approx. €5.14–€6.28 excl. taxPreliminary estimate for one variant
The skid plate on my Bauknecht GSXK 5020 SD dishwasher broke, so I designed a compatible replacement. Apparently these skid plates fit also refrigerators, freezers and other appliances from many companies. Print in STL orientation at 0.2…
Print approx. €0.30–€0.37 excl. taxPreliminary estimate for PETGSource material: PET
Approximately 600mm long model of the CAT 395 excavator. The model has working tracks, a rotating floor, and a fully movable arm and bucket. The model is printed entirely in PLA with a resolution of 0.20 for the larger parts and 0.10 for…
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
I really like the model 395 clamps. I could not find a worktable to go with them, so I created this one. The Clip part is designed to mount directly onto the base of the front mount of the clamps model, sharing the same (or slightly…
This model is compatible with the lego system.
Use a straight piece of wood 90 to 100mm or deeper, 1100mm wide is enough to cut 35” arrows. I used 12mm thick wood, but a bit thicker can be better so you don’t have to use short screws. Based around a Dremel 395. It should be fairly…
Base based on Zack Freedman's Gridfinity "Templates.f3d" file. The complete model consists of two halves. I split the model into two halves due to print bed size limitations. Holds the rotary tool, its cord, and even a spot for the wrench…
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
Made some modifications to fit on the standard tool plate of the MPCNC. also changed the clamps as the hinge didn't print properly for me Category: Machine Tools
Had a pile of these thermistors sitting around in my drawer from my old ender and decided to repurpose them as a chamber temperature sensor for my Voron 2.4 Designed to fit on any 2020 extrusion and includes a raised section on the bottom…
PETG Layer 0.2 Fill 100%
This is an enclosure to house the mmWave presence sensor that is used by the ESP8266 board. The mmWave sensor build was created following the Everything Smart Home Video channel. I recommend watching the video to understand how to build…
I bought some Bessey TG4.540 clamps from the HD and it took maybe an hour after bringing them home before I lost one of the @#$% pads. No problem I figure, Bessey offers replacement pads and I can probably just pick some up from The Big…
A small box created to fit a ESP32 C3 super mini + DFRobot mmWave Radar (SEN0395), in my case for use with ESPHome. It has a snap fit lid with slots to make it easier to get off again. I've added my parameterized Fusion360 file for easier…
This model is compatible with the lego system.
Traxxas 3953 Revo 3.3 Spur gear 36t mod 1 Mod: 1 Tooth : 36T Center Hole Diamter: 10.8mm Gear Thickness: 6.5mm Tooth Pressure Angle: 14.5 Video : This is Revo 3.3 converted to brushless Print Settings Printer Brand: Robo 3D Printer: R1…
Small fan that fits a Dremel 395 chuck to clear chips and debris while using MPCNC Category: Tools
I used to have a holder with holes for the tools and I always disliked the fact that it took a lot of space above to insert or remove a tool. This design makes it much easier to handle the tools and there is no space needed above.
I redesigned the chamber thermistor mount to have the thermistor and wire outputs be opposite instead of at a right angle to each other. This is better for my use case, as it allows me to mount it on the bottom back extrusion of my Voron…
A tiny mount for a NTC 100K 3950 temperature sensor. BOM 1x M3x6 FHCS
This model is compatible with the lego system.
I created this cover for the mount of my Garmin Zumo 396, so I it would look a little bit better, when I haven't mounted the GPS Unit. Also this should somewhat protect the mount. I would still recommend removing the cover after heavy…
lego 6231 4865 23969 93095 23950 30413 91501 4864 14718 2362
This model is compatible with the lego system.
This model is a case for Sixunited AXB35 boards with up to Ryzen AI Max+ 395 which is used in mini computers such as the Bosgame M5 or GMKtec EVO-X2. The biggest problem of these cases is the thermals and the noise level. The original…
This is a case to house the D1Mini and the Presence SEN0395 chip in a small form factor to be used around the house. It blends into any outlet when paired with the charger listed below. The instructions on how to make the board can be…
A case for an ESP32 NodeMCU HW-395 This sis for MCU size of ca 52x26 mm
2x2 Gridfinity holder for the movement cushion N5395-55. 5 Gridfinity HU (35mm) plus 4.4mm Fully Gridfinity compliant
Mounts to 4040 extrusion using M4 bolts and T nuts. I used countersunk bolts for a flush finish. Print in PETG / ABS / ASA or any high(er) temperature filament. Built and available on OnShape if you need to make adjustments.
This mount allows a Dremel 395 to be mounted onto an arbor press to act like a miniature drill press. It has been remixed from the source design to work with 8-32 nuts and screws and optionally a 1/4-20 bolt can serve as a depth stop. I…
Motorcycle cradle mount, stronger than using the car mount. Recommend ASA for this but PETG or even PLA might do as a stop gap. Allows for USB plugin powew which original cradle does not. It should also be possible to power through the…
Simple enclosure for a generic 3950 thermistor (the ones with the glass bead). Can be used to mount to 2020 aluminum extrusions. Additional Hardware needed: 1x M3x8 SHCS 1x M3 Hammer (T) Nut
I think I vacuumed up the plate from my WEN 3959 9-inch bandsaw. Whoops! Here's a replacement. I was going to make a version with flexures that would clip in place, but then I realized that a jam-fit was faster to model and more efficient…
Printed out of PETG CF. Needed Materials: 4x M5*45mm Screw 4x M5 Washer 4x M5*10*7 (heat nuts) 4x M4*16 4x M4 Washer 4x M4*4*6 (heat nuts)
lego 69729 10202 1751 90498 11203 35459 3395 83496
This is a replacement cap for Dremel Model 395 brushes. The photos have the old (darker blue) sitting next to the new (lighter blue). Layer height: .12 Infill: 100% for safety Printed in Elegoo Blue PLA
Ce modèle représente un crochet de levage de type A6 conforme à la norme UNI 4395 . Il a été conçu sous SolidWorks , avec des cotes techniques issues de la norme, et peut être utilisé pour des projets de simulation mécanique , formation ,…
Remix for a Dremel 395. Print Settings Printer Brand: TEVO Printer: Tarantula Rafts: No Supports: No Resolution: 0.2 Infill: 25 Category: Machine Tools
This mounts an old Dremel 395 to the Lowrider 4 CNC by V1 Engineering. I designed this quickly for a temporary need. The Lowrider 4 CNC is designed for a router. A Dremel may burn out or wear through bits faster. I temporarily mounted…
Piece with the same measurements as IKEA 10039571 for use on the back of the METOD furniture
lego 79389 73825 44728 99207 93274 3956 4598 14520 30166 41682 4585
Mitsubishi Delica L400\L400\Space Gear - front door locking pull clip (OEM: MR230269\67395D) More durable\thicker model - to prevent future broking. All dimensions\curves\hights reproduced from original broken part. Should fit on both…
My wife snagged the navigation joystick knob on our 2012 CRV EX-L with navigation and it disappeared. The original replacement part is Honda 39544-T0A-A51. They are actually pretty cheap and readily available… But like all things in life,…
A mounting plate for the DJI Air Unit for the Hildgard 395 V6. Attached via M2 screws through existing holes in the top plate. The holes in the mount are deliberately undersized and if drilled out with a 1.6mm drill the M2 screws will…
This model was created with measurements taken from a used sleeve. I have accounted for this wear and not modeled it, so this should be as for a brand new sleeve. All measurements are accurate to within 0.05mm, and the critical ones are…
ORGANIZZATORE GT395 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante: Artillery Sidewinder X3 PLUS / X4 PLUS
UPDATES 1 Sept 2026: Reframed the write-up to: - retain the original remixed model as V1 (red cap in the photos) - add a new model (V2), built in Fusion360 (black cap in the photos) - STEP and F3D files uploaded - Exported 3MF file…
I wanted to put this LEGO Question Mark Block on a shelf. The only space which was available was at the very top. In order to display it in a cool way I designed these feet which balance the block on its edge. It is perfectly balanced…
A USB storage box that looks like a Power Xpert 9395 UPS with LCD touchscreen HMI. It can store up to 5 USB thumb drives. Possibly a few more if you're nasty.
Hello all you Toyota restorers! Here is a cheap way to plug your frame. Online, the cheapest I could find these plugs is $3 with $20 shipping, so I said NO. Found one that fits a land cruiser, Modded it to fit the Toyota Pickup, and away…
This is a work in progress. It works but is a tight fit to get it installed in the wall.
Multiboard compatible holder for the Wera 395 HO/7 SM Nutdriver set Uses two multiboard bigthread bolts to attach it to the multiboard which makes it very rigid.
I have used the original model for my other screwdrivers, but I didn't find a good model for the Wera 395 HO pack. So I just adapted the model a little bit so that the labels are matching, and the shafts fit into the holders.
This is a lamp base for the lampshade "Buble Lamp shade" by @CarlosAceves_395508. Needed parts: Printed parts: "Light diffusor" "Attachment plate" "Buble Lamp shade" by @CarlosAceves_395508 scaled according to the attached image "Base"…
Individual STLs are not ready for multicolor. I included a complete 3mf with colorization. I printed on a Prusa XL.
Feet for the Hildagard 395 Print Settings Printer: P3 Steal Rafts: No Supports: No Resolution: .2 Infill: 40% Category: R/C Vehicles
Simple spacers to slightly elevate the Lenovo X39x series laptop in order to improve airflow. DO NOT CLOSE THE LID WITH SPACERS IN PLACE! ALWAYS REMOVE BEFORE CLOSING THE LAPTOP!
Getrieberad für Handmixer, für Langlebigkeit mit PCCF drucken, 0,15mm Structural oder bei SL1S mit Prusament Tough Anthrazite
A mount for the Matek M8Q-5883 which uses the sma Mount Category: R/C Vehicles
Technic Panel Fairing #9 Medium Triangle Smooth (2395)
This is a Honeycomb Storage Wall Hoder for Wera 395 HO Screwdrivers. I remixed it from Printables and I added the Honeycombs to the Model and Removed the Mounting Holes for the Screws.
A bit of a bodge, but it works. Would suggest printing in something like ASA, the PLA one I printed lasted about 6 months of racing, which isn't bad considering. I've just printed a handful of them to replace as they break.
I saw there are already five or six other versions but all miss out on a thing I want. I wanted to model the radius in the bend of each key so that the key sits more naturally in the holder. I wanted the keys to be dropped in from the top…
I picked up this UV light from Microcenter awhile ago, the "police security uv light 395nm". When going down the Gridfinity rabbit hole I noticed that there was not a holder for it yet. Hopefully this fills that gap.
Boom 1 - Thermistor 1 - m3x8 1 - m2x6 selftap 1 - m3 tnut
The Wera 395 Nutsetter kit contains seven nut drivers sized 13, 10, 8, 7, 6, 5.5 and 5mm. Because the shafts are hollow to allow for fastening nuts on long bolts (such as when tightening nuts on long shafts, like on water taps) they are…
NTC 100k 3950 Glass Thermistor Chamber Sensor Mount ADAPTIVE FAN
23 mm ID x 40 mm AD x 40 mm L Gummibuchse/Lager/Dämpfer für diverse Anwendung in New Holland und Case Mähdreschern. Druckparameter: 5 Wände / 100% Füllung / TPU 95A Rubber bushings/bearings/dampers for various applications in New Holland…
Upgrade your shop setup and keep dust to a minimum with this custom-designed dust port adapter, built specifically for the Craftsman 6” Belt Sander (Model #32039596) . Engineered with a dedicated keying notch inside the coupler, this…
The freezer lid broke, so I decided to replace it by designing and printing a new one. Attached are the freezer lid models: one designed with a slot to glue in a gasket, and one without. An example of print orientation is also included.…
A compact storage tube designed to hold 395-399 batteries in an AA-sized format. See my other designs for different types of batteries. Print Settings Printer Brand: Artillery Printer: Artillery Sidewinder X1 Rafts: Doesn't Matter.…
I wanted to put this LEGO Question Mark Block on a shelf. The only space which was available was at the very top. In order to display it in a cool way I designed these feet which balance the block on its edge. It is perfectly balanced…
