Counting matching models…
This space saving hexagon pattern basket system should do the job! Just print and forget, remember to turn the speed down if needed. You can stack baskets on each other with or without the lid - They stack BOTH ways!
Calibration cube to test 3D printers. This is old version of my All-in-One Calibration Cube. If you want do download never one, click this link witch redirects you to new version or just find it on my profile among uploaded models.…
English below 2 Möglichkeiten zur Überprüfung des Flows: Hinweis: Wenn Du größere oder kleinere Würfel bevorzugst, skaliere sie bitte mit deinem Slicer auf die von dir bevorzugte Größe. 1. Möglichkeit zur Berechnung des Flows: Wähle…
Hinge for the Audio-Technica ATH-M40x. I tried out the version from thingiverse ( https://www.thingiverse.com/thing:2823187 ), but I thought it didn't fit well so I recreated one myself. I think it works well! Made a left and right version.
UPFRONT: I just created an Discord server for the PVS420 so its easier to talk about and share thoughts, ideas, improvements. All further updates to the design, functions and software will be available on my Discord!…
Flat version of the Domed Cover...SnapAssy. Please NOTE! Remove the MicroSD Card before assembly and disassembly! You will need... Noctua 40x40x10 MM Fan 5V 2 Dupont female single pins to connect to 5V or 3.3V and Ground GPIO pins. You…
Calibration cube to test 3D printers. New V2 version included some fixes that stiffens overhang test, makes it easier to read the overhang angle and some more. Calibration Cube All-in-One Included: Letters to identify axis Calibration…
Case for Noctua 5V 40x10mm 4 pin Fan... Snap together assembly, no screws required. CPU stays very Cool. 36C during stress test (100% Fan) Screwless! Frame4Fan-SimpleNoScrews-Assy Frame with posts, does not require screws for the case and…
The NA-IS1-14 is a 5mm thick intake side spacer frames for Noctua 140x25mm fans that can help to improve both acoustics and performance in suction or “pull” type applications where the fan draws air through obstacles such as grills,…
This is a mixer tool for mixing. It prints without supports, the hexagonal handle has a standard 1/4 size and attaches directly to your electric drill. Diameter = 40mm Head height = 40mm Hex handle Length = 160mm
a Nozzle Holder that fits inside a 40x40 Aluminium V Slot extrusion. Common on many Printers, in my case its an Ender 3 Pro Fits 18 Nozzles and Usually you can Fit 2 of these on your printer, or 4 if you don't mind putting them on the…
This is a remix of CG-Tech's excellent extruder stepper motor cooling fan add-on on Thingiverse. EDIT: I've uploaded a second version with deflected air ducts, based on CG-Tech's alternative one. It was a quick bodge and the stl file is…
Simple trash bin, uses full build space of BambuLab X1/P1 series printers. You can also scale it up or down to meet your needs.
Profile pipe plug cap 20x20mm and 40x20mm Заглушка профильной квадратной трубы 20х20мм и 40х20мм
This is a candle mold container for 40mm diameter and max 100mm tall candle. Lock the mold container with a ziplock Put the candle string through the bottom lid and tape it to lid's hollow Attach the bottom lid to the bottom of the mold…
Vytvořil jsem kalibrační kostku o rozměrech 40x40x40mm všechny hrany kromě těch co leží na podložce mají zaoblené hrany
I wanted to switch out the stock hot end fan with a noctua A4x20 but couldn't find a new shroud that I liked. I love the stock shroud, so I basically just redesigned it to fit the larger fan and removed the grills to help with noise. The…
This spacer fits over the plastic stand-offs that prevent you retrofitting a stock 40x20mm fan on the AD5M lower HEPA filter housing outlet. Without the spacer there is an approximately 4mm air gap between the fan body and lower filter…
2,8 TFT SPI 240x320 V1.2
The endcap is held by a middle pin into the profile. The small standoffs prevent rotation. There are 5 Versions since different extrusion brands also have different hole sizes: with a pin for a 5mm hole with a pin for a 5.5mm hole with a…
Wenn mal kein Winkel da ist einfach kurz drucken…. Für Item Profile 40x40 (4040) und Nut 8mnm
Aluminum Profile End Cap - 40x40 [mm] Plain This is an end cap designed to cover the ends of the standard aluminum profiles that come with the Creality Ender-3 Pro 3D printer. This version is intended for use with the 40x40 [mm] aluminum…
Aluminium profile cover 40x40 (N8I) with good fit. Useful to cover the sharp edges and keep off dust.
This replaces the original Shroud For 40x20mm Hot-End Fan and the stock 4010 Blower Fan! I made a new version of my "Clean Shroud" that holds a 40x20mm Hot-End Fan and the stock 4010 Blower Fan (with its mounting) for Creality Ender-3 V2.…
About The most common sizes (length × width) are 600 × 400 mm and 400 × 300 mm, which can be stacked together to fill a Euro-pallet measuring 1200 × 800 mm. This model is 1:10 scale.
New petrol canister lid with Buttres M40x4 thread and with groove for rubber seal. Update 19.01.2024: After 3 years I discovered (and also read) that PETG does not tolerate bio-component (and some additives) in gasoline very well and the…
Case for Arduino UNO, CNC Shield and 60x60 or 40x40 fan (grbl).
This is the 40x20 mm version of the Cable Duct for 4040 profiles. It comes in three lenghts, 50 mm, 100 mm and 150 mm. Also see my other models for 40x10 mm and 40x40 mm versions.
Das Model kann beliebig im Slicer auf Z vergrößert werden. Z=100% hat dann ein 40x40 Profil mit der Z länge: 1mm Z=200% →Z länge 2mm … Z=?00% → Z länge von ?mm ------ The model can be enlarged to Z as desired in the slicer. Z=100% then…
Have some fun shooting your own targets They are 139x139mm just to be sure they fit As we say in Sweden (Sorry, dosen't translate well to english): Skjut inte upp till morgondagen det du kan skjuta ner idag!
You'll need four M5x12 and eight M3x6 for the linear rail block (M3x8 might work too, not sure) To install it, partially screw in the screw into the hex nut (use the stock ones) to lift the nut, and place the mount over the rail block…
I printed the parts with Prusament PETG (PLA works just as well). The sides I printed with .15 layer height to get clean holes. For the rest I choose .2 layer height. The pins could be inserted as an anti rotation lock. The side to side…
Ender 3 S1/Pro/Plus Sprite Fan Duct A specifically designed Sprite Extruder Fan Duct to suit the Ender 3 S1 series 3D Printers . This Fan Duct component is a low-level upgrade that addresses the factory inability to a clear view from the…
While the Audio-Technica ATH-M40 is a great choice for closed headphones around $100, they have one major flaw. The hinge attaching the yoke to the headband isn't as robust as we would have liked. When the hinge on my original M40x broke,…
Warning: Do not use a printed tube to make a moderator. A moderator of any length, including an integrated one, can be assembled from a set of cones. The moderator is assembled on the basis of a 40x1.5 mm aluminum tube. Secure the covers…
Prints fast and with not much material. Holds enough silica to maintain a single spool
This is a remix of https://www.thingiverse.com/thing:3646996 I have modified it to use a 40x20mm fan, instead of the 40x10 fan from the original. Tested with a Noctua NF-A4x20 FLX fan. For best results, print on it's side with…
Print from a temperature resistant material, PLA is not suitable - use PTEG, ASA or ABS for example. Note: measure your heatsink, the older models are 18 mm wide, the newer models 20 mm
I wanted a box with a clean look that presents the litophane prints nicely by giving them a backlight. The box could also be used as a nightlight. One side has a round indentation to feed a cable through. In the pictures you see me using…
Test cubes 20x20x20, 30x30x30, 40x40x40, 50x50x50.
designed for the ender 3v2 but should fit any standard 40x40 extrusion. 3pcs required. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: .2 Infill: 20 Filament: PLA+ Notes: nozzle temp - 205 bed…
🎮 Introducing the 3D Printed Wheel Holder designed specifically for the Fanatec Quick release Wheels, a must-have accessory for every serious sim racer's setup. Crafted with precision and functionality in mind, this wheel holder…
Depending on what you want to build this plastic one might replace metal original. Sides: 40mm x 40m x 40mm Thickness: 5mm Hole diameter: 5mm hashtag uploading old stuff If you're interesting in this thing, you might want to check those…
These Baseplates fit tightly into the IKEA Malm Drawer - the small one which fits neatly besides your bed. They have a little corner at the side, so the bins will have a little gap left and right (and in the back). The gap is similar on…
A simple stand base for the Anbernic RG40XXV. (3 variants: simple, "RG40XXV" inset text, "RG40XXV" outset text). In the picture you can see it printed in White PETG (PLA works too), 0.15mm layer height (you can go higher but you will get…
1U panel for 4 40x40mm fans I used M3 counter sunk screws and flansh heat inserst as the “nut” Compatible with LAB RAX
UPFRONT: C6 Core was just released and the link updated! listing is still in screening process and should be accessible from 20.06.26! Core arrived and its a worthy sucessor to the P6 providing an even better less grainy picture with high…
This 3D-printable cable tray is designed for effective cable management in DIY CNC electronics enclosures, workbenches, or general wiring setups. It features a compact design and easy-access slots for organized cable routing. Features: ✅…
Cable Channel: - 20mm x 30mm, 20mm up to 320mm length in 20mm increments, 20mm Clip - 30mm x 30mm, 20mm up to 320mm length in 20mm increments, 30mm Clip - 40mm x 30mm, 20mm up to 320mm length in 20mm increments, 40mm Clip - 50mm x 30mm,…
A flat fan grill for noctua 40x40
Welcome to another functional design by Nodus 3D . This Heavy-Duty Hinge Set is engineered for maximum strength and smooth operation. Designed precisely in Fusion 360, these hinges feature countersunk holes for a flush, professional…
a cube that will allow you to calibrate the printer for filament extrusion
A Nozzle Holder that that fits inside a 40x40 Aluminum V Slot extrusion. Common on many Printers ( Ender 3 + Clones ). I remixed this because I wanted a handle to be able to open the drawer easier, of course it HAD to be in the shape of…
Da ein User hier nach einem Alu Profil gefragt hat habe ich einfach mal eines gezeichnet und hier für euch hochgeladen. Ob sowas Sinn macht ist die Frage aber das dürft ihr selbst entscheiden. Das ganze im Slicer einfach auf die…
This is a remix of LordDenos original HSW Holder but with 70mm height
This is the 40x10 mm version of the Cable Duct for 4040 profiles. It comes in three lenghts, 50 mm, 100 mm and 150 mm. Due to the minimal height it might be a bit hard to remove once it's clicked into place. Also see my other models for…
The housing was designed for a 2.8" LCD display. In the device under construction, simply cut a 52 × 90 mm opening and attach the housing using double-sided tape or plastic adhesive. The inserts used are M2.5 × 4 × 3.5. I printed the…
It would be nice if you post your make. Thank you
Its designed to be placed over a 4040 or 8040 extrusion and bolted on with 2 M8 screws. Feel free to ask any questions if theres something unclear.
diversos modelos todos d e 200mm, si necesitas una longitud diferente no dudes en pedirla.
Basic set of inserts for 240x205 variant Top and middle inserts are third of the width so you can combine them however you want. Screw inserts are meant to be used together. All inserts have 45° chamfer so you can take them out and for…
This is a remix of Prusa i3 MK3S+ Extruder Stepper Cooler Add-on (for 40x40 Fan) by Strathpeffer3D with an added thread for a PC4-M10 pneumatic connector and updated for MK3S+. MK3S and MK3S+ have different FS-Cover slots (thx to HayaMini…
I didn't feel like I needed the sealing box, but liked everything about this design, so I dropped the design into a 3x5 gridfinity drawer, while expanding the spool count from 27 to 40.
Is a remix of https://www.thingiverse.com/thing:4408571 . Fan duct for Creality CR-10 / Ender 3 printers with Micro Swiss Direct Drive Extruder. Suitable for 40x40x20 fans and BL-Touch. BL-Touch offset X=-46 Y=-9 The holes for the fans…
2020 Corner bracket (Angled Triangular Prism) 20x20 - 40x20 - 60x20 - 80x20mm Spec: Hole diameter 4.2mm (M3-M4 Socket Head) Slot 8.5x17.2mm Suitable for: 20x20mm extruded aluminium…
The screws needed are M5 x 0.8 screws. The profile is 40x40mm wide and the openings on the side are each 10mm wide. U can connect several units via M5 x 0.8 threadrods.
just a simple AA battery holder with a square design
English (Deutsch weiter unten) A fan that fits into the Dometic Mini-Heki (40x40xm). Inside width: 382mm. Printing: Print in ASA or ABS only, for temperature stability. Required parts: 2x Corsair RS140 MAX 140mm ( Link ) 1x PWM Fan…
Da gibt es nicht viel zusagen. Die Bilder sprechen für sich. Es kann mit jedem Filament gedruckt werden. Der Winkel ist vielseitig einsetzt bar.
Endcaps for aluminiumsprofile 40x40, 40x80, 40x120 and 40x160
Single hook fits aluminum frames with a 40 x 40 mm, 10 mm T-slot. The test lead folder is placed in the slot and then rotated to hold. It can be made without support if it is printed horizontally.
Eclosure for WX-2412 24V power supply board. It was designed with 3D printing mentality. No supports needed. CAD files included. Features: -The 40mm air intake fan -XT60 connector for DC output -IEC320 C14 socket for AC input -Easy…
Well I really like these "propeller style" cover so I've decided to print them... but then, I found on my CR-10 V3 that I have a problem. Simply put, when my printer auto homing X axis, it's in collision with arm cover. So I had to create…
Hello, this is an optimized very Strong Corner Bracket/Winkel for Aluminium Extrusion Profiles like ITEM in 40x40 size with holes for M6 Screws. I optimized the structur to have the strongest layer lines, how you can see in the pictures…
Customizable Sizes for Every Need My boxes come in a wide range of sizes to suit different needs. They are available from a compact size of 40x40x10 mm to a larger size of 150x150x150 mm. These boxes are provided with increments of 5mm,…
Mainboard / motherboard cover for Ender 3 v2 with 40x40x20mm (4020) fan. You can use a 4010 as well without printer risers. Fan mounting M4, cover mounting uses stock mounting holes and hardware. Supports are optional. Pictured white…
Depending on what you want to build this plastic one might replace metal original. Sides: 40mm x 40m x 40mm Thickness: 5mm Hole diameter: 5mm hashtag uploading old stuff If you're interesting in this thing, you might want to check those…
The panel is designed to be mounted in a DIY metal housing with dimensions of 80 × 170 × 130 mm. It is intended for use with a TFT LCD display TZT 240×320 2.8" SP and an encoder or potentiometer. I created the panel with the YoRadio…
(DE) Entdecke die 100 Euro Münzspardose – der ideale Begleiter für alle Sparfreunde! Die stilvolle Spardose im modernen Design... beinhaltet dann 100 Euro, wenn sie randvoll mit 40x 2€ + 20x 1€ Münzen gefüllt ist. Viel Spaß beim Drucken…
This is the 40x40 mm version of the Cable Duct for 4040 profiles. It comes in three lenghts, 50 mm, 100 mm and 150 mm. Also see my other models for 40x10 mm and 40x20 mm versions.
Tiny version ( 40x40mm) of my slider
This holds up to 40 micro sd cards and is securely enclosed in the carry tube. It can be printed without support.
Just a groove cover for 8020 or Bosch Rexroth profiles (40 x 40 mm, Type I, 8 mm groove). Of course you can scale the height to your needs. It fits quite firmly so it won't be bent or kicked out by thick cables. Print with infill.
Small seed dryer I made for a friend who grows a lot of chilis with super tiny seeds with about 1mm in diameter. Features: It contains 5 trays with the size of 45x45x10mm. The trays fit tight with a 0.3mm gap into the tray holder. The fan…
The model is meant to be printed in TPU, but any material with some flex might work. I recommend using 6 shells, leaving the core at low density so the clip is a little more flexible as shown in the screenshot.
This replaces the original Shroud For 40x25mm Hot-End Fan and the stock 4010 Blower Fan! I made a new shroud from scratch for a upgraded 40x25mm Hot-End Fan and the stock 4010 Blower Fan (and its mounting) for Creality Ender-3 V2. The…
Support for Fanatec CSL DD used for 40x80 aluminum profiles sim rig. No supports are required. M6 bolts for securing the CSL DD and M8 bolts for the 40x80 profiles.
Angled mounts for 40x40mm aluminium profiles with 8mm T-slot.
Futuristic Design Handles - Maniglie design futuristico Overall dimensions: 105x240x45mm Resize to adjust dimension If you download/enjoyed this file, please leave a like - Thks
Holds a 40x40x20mm 5vdc fan between spools 3 and 4 of the Snapmaker U1. Clips into the existing vent holes so no need to disassemble or modify the case or use tape. Remix of Full_covered_40mm_fan_cover_aimpoint.stl by pakkko/Dennis Romje.…
Designed a 3D model of the ATH-M40x/50x Earcups in Fusion 360 to be printed and allows you to customize your headphones. In my design, I have removed the locking mechanism for the 2.5mm cable as the cable holds very tightly even without…
Aluminum Profile End Cap - 40x40 [mm] Adeptus Mechanicus This is an end cap designed to cover the ends of the standard aluminum profiles that come with the Creality Ender-3 Pro 3D printer. For this design I used kombatunit's "Adeptus…
Everybody hates loose caps, which are lost is seconds after installation. This cap has a screw, which needs a thread, but is secured for good.
EDIT: the linked filter box doesn't exist anymore, and I don't have the files for it either. You may need to find something else to print! Use together with this filter box originally made for activated carbon. It allows you to neatly fit…
I remixed this nut in order to only have a 5.0mm DIA hole which is then tapped to M6 thread to have a 100% plastic part. If you already have a tap kit available, and don't want any steel in your part, this could be a better option than…
I Stretched the case designed by Haz1 to make room for a POE Texas hat. Just a simple remix. It's pretty rough but does exactly whats needed. Thanks for the great work Haz1 find his original thing:…
Verbindungsdreieck 40x40 Aluprofile, Nut 8
End Cap Cover Solar Rail PV Profile For Profile 40x40mm (krytka na AL profil k solárním panelům). Profile is a bit lose to hold better on the end that was cut and is not clear.
![Aluminum Profile End Cap - 40x40 [mm] Plain](https://media.printables.com/media/prints/367740/images/3102560_7d9cc259-22cf-45cb-a2c9-5ba12728d2bf/large_display_40x40_plain_by_frappem_v4_367740.png)
![Aluminum Profile End Cap - 40x40 [mm] Adeptus Mechanicus](https://media.printables.com/media/prints/367739/images/3102558_45197d59-5a28-4bb8-98ce-fdd52bc30a9b/large_display_40x40_adeptus_mechanicus_by_frappem_v2_367739.png)
