Search results: 451

Lego Compatible (4519.dat) Technic Axle 3

This model is compatible with the lego system.

Ridgid R4520/R4512 Table Saw Fence guide upgrade

Update 2024-4-29: I've uploaded a pair that have minimal supports. I really don't recommend using them, as the models with the built in supports have been fine tuned over dozens of test prints to provide the best printability and most…

Lego Compatible (50451.dat) Technic Axle 16

This model is compatible with the lego system.

Ridgid R4514 10 Portable table Saw Fence Upgrade

This is a part to replace the small block that the fence uses to clip the guide fence to the saw table. And, greatly improves the repeatability of maintaining square when the fence is moved to a new dimension.

Ridgid R4512 Table saw zero clearance throat plate (R4520?)

This is a zero clearance throat plate for Ridgid R4512 table saws. These may or may not work on R4520 saws? I believe they are the same but I do not own one to verify. Because the print is too large for most printers, it must be printed…

Wiper fluid funnel Smart 451 - Wischwassertrichter Smart 451

I was pretty upset the way Smart designed the intake for wiper fluid, made a funnel for it. Ich war ziemlich ‘bedient’ wie Smart den Wischwasserbehälter designte, hier mein Trichter dafür.

Lego Compatible (4510.dat) Plate 1 x 8 with Door Rail

This model is compatible with the lego system.

Ridgid R4514 Table Saw Zero Clearance Insert

For large enough printer, just use the body_full and the two nob parts. For smaller printer, you will have to print the body as two parts and then connect them using 3 copies of the insert. Use glue if you want to make it permanently. For…

KRUPS Sandwich Toaster // Model: "FDK451" Handgriff Abdeckung (Replacement) // V9 added

Print Settings: PETG / PLA / ASA are all not working due to temperature → PA12-CF is working :)! thanks @Rumbledoc for the make! hi, Leider ist die Handgriff-Abdeckung die man entfernen muss um den Klipp des Sandwich Toasters zu…

Miter Bar for Ridgid R4512

Have a few jigs and sleds for my table saw and got tired of making them out of wood and having to fine tune them. This fits the miter bar slot in my Ridgid R4512 perfectly. Uses a 1/4x20 nut and can be secured to whatever jig you're…

Mittelkonsole für Smart 451

Mittelkonsole für Smart 451 (beta) USB, Steckdose (Zigarettenanzünder) und Smartphone haben Adapter für die Anpassung Gedruckt auf einem MK4 sorry: Die Seitenteile habe ich auf einem Anycubic Chiron gedruckt. Die müssen für kleinere…

Rigid Table Saw R4514 Throat Plate

Rigid Table Saw R4514 Throat Plate. Original one broke, needed to design a new one. Designed with having the broken throat plate, but not the saw in place (ie: tolerances not yet tested when printed). Printed in ABS, 40% infill with tree…

CZ 457 455 451 512 Magazine Pouch

This is a belt pouch, or molle adaptable, for CZ .22LR rifle 10 round magazines. It is also useful as a small tool or knife holder. The V3 file is specifically for TPU. It has a thickened pouch lip to stiffen a bit. I lean towards the TPU…

Shure SM 57 - AKG C451 Clip

I printed it in PLA at 0.2mm and 20% infill and it works just fine

Smart 451 Trunk Handle

Give me a Like ❤ Follow Me 😁🤗 I have made 4 Sizes Normal : 70mm Middle: 100mm Large: 120mm ExtraLarge:150mm Print in ABS ASA PETG PP PC etc. Clean the Glass Surface with Acetone. Clean the Print with Isopropanol. Tape to use: 3M VHB 5952F…

Ridgid R4514 Pro 10in. Jobsite Table Saw Fence V1 Slider (P/N 089240028112)

(Imported from my models on Thingiverse: https://www.thingiverse.com/muchtall/designs ) I have a Ridgid R4514 Pro 10 in. Jobsite Table Saw, on which I broke the little springed sliding retaining fingers off the fence slide while removing…

Lego Compatible (4515.dat) Slope Brick 10 6 x 8

This model is compatible with the lego system.

osVAC M32-R63 (63 mm Ridgid Table Saw Adapter R4518)

This is an osVAC adapter for the R4518 Ridgid Table Saw dust port. The larger end has an inner diameter of 63 mm and fits snuggly on the dust port. Printed with 50% infill, a brim, and the large end touching the bed.…

MagSafe Mobile Phone Holder for Smart 451 with wireless Belkin Charger

Since a while I was searching for a decent mobile phone mount for my Smart 451 EVs. This design holds any phone with MagSafe just below the navigation system for easy access. With wireless charging no fumbling with cables needes.…

lego 32028 4510 30586 4216 88393 4217 2653

lego 32028 4510 30586 4216 88393 4217 2653

Resqme visor clip for Smart ForTwo (451)

A Visor Clip/Mount for your Resqme suitable for Smart Car Fortwo (451)

Sunroof Shade Repair Mount for a 451 Smart Car.

This is the third iteration of a design I ended up making and using to repair/replace the somewhat dodgy materials that Webasto double shot onto their panoramic sunroof for the 451 Smart Passion I have. It's simple. You print it in…

Märklin H0 4513 Tipper wagon replacement part

Simple replacement tipper element for the metal Märklin 4513 Wagon. Printed with supports, best way I found was upside down so the marks are inside. If not printed in high resolution, the axle elements require some filing. Complete…

Smart 451 Kick-Panel Retainer Clip

The kick panel clips are...heh...fragile on a Smart 451 at least. They snap on the rail fingers easily. And while you can get parts for these online, like the Plastic Retention Nut I made (Also included in my designs on here) it's not…

Lumix 45-150 (H-FS45150) Lens Hood | Reversible | Round

I bought a used Lumix 45-150 (H-FS45150) camera lens that did not come with a hood and being a 3d printing hobbyist I figured I'd go find an STL rather than paying for one. The only one I could find was a square lens hood by ChrisNupp.…

RIDGID R4512 Mitre Bar

Mitre bar with a tight fit for RIDGID R4512 table saw.

Smart ForTwo 451 Fuel Door

This is the Smart ForTwo 451 Fuel Door "skin." An overzealous pump attendant pulled REALLY hard on my daughter's Smart fuel door and broke the tabs that hold the panel on to the door mechanism. I am a design novice, so the finger pull…

Lego Compatible (4518b.dat) Forklift Rails 2 x 3 x 7.667 Locking with 4 Fingers

This model is compatible with the lego system.

GE 45170 Power Bar Mounts

Brackets to mount the GE 45170 powerbar in the shop or under a desk. Category: Organization

Suzuki GS500 e Tankgummi, 4451134A00

Hier mein Modell für ein Tankgummi für die Suzuki GS500 e. Wird mit TPU, 10 Infill, 3 Außenlinien gedruckt. 0.28mm Layerhöhe und 0.2mm Düse. Erfüllt seinen Zweck sehr gut.

2in Crayford Focuser - 4511F dual speed drive

Original model and build instructions here: https://marcosatm.com/2020/06/04/2in-crayford-focuser/ This is based on the nut version as I found the heatserts for the bearings difficult to get right. I've added a lug to secure the reduction…

Lego Compatible (4517.dat) Forklift Forks 4 x 6

This model is compatible with the lego system.

Mercedes Smart 451 pulsante finestrini elettrici

Nanoleaf Electronic Housing for RGBIC H61451D1

If you buy Govee RGBIC H61451D1 (Bluetooth + Remote) LED strip then more space is needed to house all the electronics. This remix handles it and also has a slot to mount the IR remote receiver. The rest of the parts can be found here…

Lego Compatible (4518a.dat) Forklift Rails 2 x 3 x 7.667 Non-locking with 6 Fingers

This model is compatible with the lego system.

MMA8451 Accelerometer case

The case model has 2 slots made to insert magnets for a more easy installation, making it also possible to retrieve the magnets if the print doesn't turn out so well. The size of the inserted magnets is 20 * 10 * 3 mm and they can be…

Eheim Absperrhahn / stopclock holder - 4004512 4005510 4004412 4005410

This is a custom-designed holder for the following Eheim models: Eheim 4004512 Eheim 4005510 Eheim 4004412 Eheim 4005410 The holders are available in two different sizes, 20mm and 30mm. You can choose between a single holder or a dual…

Washer fluid cap replacement for Suzuki Sx4 /Swift/Splash 38451-77J00

This is replacement part for Suzuki Sx4/Splash/Swift. Part number: 38451-77J00 It has been printed with TPU 95A. The part is to be printed with the logo facing the build plate. Testing: This printed part has been real-world tested on…

Smart Fortwo 451 Intake Tube (Resonator Delete)

This is a prototype of cold air intake for the Smart 451 that deletes the intake resonator. It's modeled it to have a consistent internal diameter along it's length and a smooth route for the air to travel from the air filter box to the…

Frigidaire Microwave Handle Plastic Parts (5304513455)

The main handle on this microwave is made of steel, but it mounts via 2 plastic pieces (painted to look like steel). The plastic parts are fairly easy to break, and the handle is only sold as a complete unit, as far as I could find. Print…

Bodum Bistro 11451 Electric Water Kettle Base/Holder for RV, Van or Boat

What's this for? Designed to keep your Bodum Electric Kettle and heating element together nicely. Optionally you can use my Cabbly Cuddy cord winder that I scaled to 100mm to match the kettle diameter to tidy up the cable when stored.…

Door latch bracket for KitchenAid and Whirlpool microwaves (WP8205451)

This part broke on my microwave and a replacement is about ~$60 here in Canada (slightly cheaper if if I order it from the US). I decided I would print my own, and hopefully others can use this as well. My microwave is a KCMS1555RSS but…

Ridgid R4512 Miter Bar

I wasn't able to find any bars that would fit in my Ridgid table saw. I created this in case anyone would find it useful. Fits pretty perfectly in my saw. No supports needed. I printed using PLA & 15% infill.

Quick Release plate (compatible with Hasselblad 45148 Quick Coupling Plate S)

This attachment makes it easy to attach and remove the camera quickly from the Hasselblad tripod quick coupling H mounted on top of tripod. You only need camera 14" screw. My design is compatible with screw that was made by…

Oil Endless Gear / Vite senza Fine Chainsaw/Motosega ECHO GS-411 / 440 / 451 / 140S / MT 371

Oil Endless Gear / Vite senza Fine Emak 50060008R Endless Screw / Vite Senza Fine Chainsaw / Motosega ECHO 940C 941Cx Gs410Cx 411 440 451 140S Mt 371 Designed directly by using a new original one, 4x M2 screws reinforced model, to ensure…

44511‑27E00 - Suzuki GS500 tank vibration damper + lower bushings

According to ChatGPT, the 44511‑27E00 or my variant main_vibration_damper should fit: Suzuki GS500 (naked) - GS500 K1 -K6 (2001–2006) Suzuki GS500F (faired) - Models K4, K5, K6, K7, K8, K9 (2004–2009) Suzuki Bandit Range - Includes Bandit…

Electrical Outlet Mount for Smart ForTwo (451)

I wanted to preheat my car using a small electrical heater to decrease the time it sits idling in the morning. I ran an extension cord to the passenger footwell. The other end was attached to this electrical outlet:…

Jessem TS Stock Guide Adaptor for Ridgid R4514 Table Saw

Adaptor plates to mount Jessem TS Stock Guides to Ridgid R4514 table saw. Stock mounting plate is too wide for the Ridgid fence and sticks out past the edges which would interfere with taller stock. Printed tall to eliminate need for…

Phone holder with integrated wireless charging mat for Smart ForTwo 451

This is a phone holder with an inset cutout designed for an inexpensive wireless phone charger you can find on Aliexpress: https://www.aliexpress.com/item/1005007663425210.html This fits the Smart ForTwo 451 in the area to the left of the…

Smart C451 Lamp cover

This is a cover for the lights of a Smart ForTwo C451. I lost a cover and was too cheap to buy a new one. 15€ original vs. 30g TPU. On the picture the left part is the original and the right one is my version. Printed in TPU 98 Shore A…

734510001R tringle aerateur arriere scenic 3

peut se mettre pour la grille gauche ou droite imprimer en ASA ou ABS si vous voulez la boule : https://cults3d.com/fr/mod%C3%A8le-3d/gadget/renault-scenic-3-b-pillar-vent-adjustment-knob-734510001r

Lithophane Picture Holder for IKEA Floor Lamps (70145132 & 60416176)

IKEA Floor Lamps 70145132 60416176 Image to Lithophane http://3dp.rocks/lithophane/ Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution: 0.2 Category: Other

Fahrenheit 451 match box

This is a matchbox in the style of Fahrenheit 451 by Ray Bradbury.

AKG K451

Head Phone case for the AKG K451. Category: Audio

Qnap TS-451U adapter for NORCO RL-20 1U sliding rail

Made adapters for NORCO RL-20 1U sliding rails. Fits perfectly. Downside that rails are too short and for maintenance I need to slide server fully out. For each side you need to print one front and one rear peace. Rails:…

protecter for BOOSFAN's BRUSHLESS FAN :JD4512M12

protecter for BOOSFAN's BRUSHLESS FAN :JD4512M12

Rigid R4512 Electrical Box

Bought a used R4512 table saw and the electrical box had been damaged on it. I printed a new one to replace the old one. Part Number: 080035003006

knob for edifier 451 speakers

if you've lost the knobs, this is a good replacement for the herd

Triglycidyl isocyanurate 3D Molecular Model — CAS 2451-62-9

Triglycidyl isocyanurate (C12H15N3O6, CAS 2451-62-9) — a free educational 3D molecular model for teachers and students, by MolGod.org. Element symbols are cut into each atom sphere: a self-labelled teaching aid. Turn the model in your…

Upgraded Ridgid R4512 Rip Fence stop block (hook)

Upgraded stock back hook to more wider one, prevent moving at the and of the rip fence, especially when you cut wide stocks like plywood or mdf sheets. I add 20 mm from each side to the original dimensions so the width grows from 26mm in…

Ridgid R4512 Miter Bar

I wasn't able to find any bars that would fit in my Ridgid table saw. I created this in case anyone would find it useful. Fits pretty perfectly in my saw. No supports needed. I printed using PLA & 15% infill.

Lego Compatible (50451.dat) Technic Axle 16

This model is compatible with the lego system.

734510001R tringle aerateur arriere scenic 3

peut se mettre pour la grille gauche ou droite imprimer en ASA ou ABS si vous voulez la boule : https://cults3d.com/fr/mod%C3%A8le-3d/gadget/renault-scenic-3-b-pillar-vent-adjustment-knob-734510001r

knob for edifier 451 speakers

if you've lost the knobs, this is a good replacement for the herd

Fahrenheit 451 match box

This is a matchbox in the style of Fahrenheit 451 by Ray Bradbury.

Bit-Stecknuss-Satz KS Tools 911.4510 EVOLUTION Series (1/2", 30-teilig)

Titel KS Tools 911.4510 EVOLUTION 1/2" Bit-Stecknuss-Satz (30-tlg) – CAD Modell (STEP) Beschreibung Ich habe den Bit-Stecknuss-Satz KS Tools 911.4510 EVOLUTION Series (1/2", 30-teilig) vollständig im CAD rekonstruiert und stelle die…

Lego Compatible (53451.dat) Minifig Helmet Viking Horn

This model is compatible with the lego system.

Stojan k srdci od Hex @ Hex_451560

Stojánek je k tomuto modelu https://www.printables.com/model/326122-anatomical-heart

ORGANIZZATORE GT451

ORGANIZZATORE GT451 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante 3D: Artillery Sidewinder X4 PLUS Laser: Mecpow X3Pro 10W

Ridgid R4517 Table Saw 40mm (1.5 in) to 63 mm Dust Port Hose Adapter

Customized version of https://www.thingiverse.com/thing:1246651 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=1246651 Instructions Using the following options: LargeEndMeasured = inside LargeEndDiameter…

1-1/4" Hose Adapter for DeWalt D26451K Orbital Sander

A simple adapter to attach a 1-1/4" OD vacuum hose to a DeWalt orbital sander. Print Settings Printer Brand: Creality Printer: CR-10S Rafts: No Supports: No Resolution: 0.2mm Infill: 20% Filament: Inland PLA White Category: Hobby

Lorex B862 4K/B451 2K Doorbell Camera Angle Wedge Mount

The posts of the model may need to be sanded down to fit in the holes of the other lorex bracket. Compatibility: Lorex 2K Wi-Fi Video Doorbell (Wired, B451AJDB-E/B451AJD-E) Lorex 4K Wi-Fi Video Doorbell (Wired, B862AJD-E/B862AJDB-E)…

Bit-Stecknuss-Satz KS Tools 911.4510 EVOLUTION Series (1/2", 30-teilig)

Titel KS Tools 911.4510 EVOLUTION 1/2" Bit-Stecknuss-Satz (30-tlg) – CAD Modell (STEP) Beschreibung Ich habe den Bit-Stecknuss-Satz KS Tools 911.4510 EVOLUTION Series (1/2", 30-teilig) vollständig im CAD rekonstruiert und stelle die…

Seiko S-450, S-451 pressure tester button

Seiko S-450 / S-451 are professional watch dry pressure testers that sometime show up on eBay auctions. Often they are missing parts, like the o-ring seal and air compressor. But also the support button that helps prop up the watch being…

CZ_ZKM_451_452_455_magazine_3rnd

31/1/19 - Bottom plate without leaf mark added. 17/9/18 - I had to return back to fix some issues. I have enlarged height of the follower (P02) and added pictures with places to be glued. So now it should be little bit easier to make.…

Without logo - Rim Cap Radkappe Smart 451 Felge Remix

Since not everbody is keen in designing, I fused together both files for a flat surface. My FDM printer would not print the model with the logo nicely so I went for this style. The difference is that there is no logo on the outside that…

Ridgid R4512 Table Saw Foot

Somehow I lost one of the feet on my table saw, must have fallen off unnoticed in all of the times it has been wheeled around in and out of my small shop. There is a small bump on the inside that snaps into a hole in the metal leg…

Smart car 451 wheel cap covers

Did not like the naked nuts on car. Made with TPU

Urethane Belt for Task Force 90181 Band Saw (and possibly Craftsman 113.244513)

This is the urethane belt used on the Task Force 90181 10" band saw wheels. This also might possibly fit the Craftsman 113.244513 10" band saw since these two saws are identical looking. Printed in 95A TPU this fits my Task Force 90181…

RIDGID R4512 2.5in Vacuum Adapter

RIDGID R4512 2.5in Vacuum Adapter that works with RIDGID Vacuum