Counting matching models…
Where to mount phone holder in Smart EQ Fortwo 453 car? I found several phone holders but no one is best for my car so I decide to develop something by myself. And it can be used also as pen holder. You can see video here I made lot of…
A magazine I designed after my factory CZ one. Might require some hand fitting. The spring and follower are steel.
Remix of the original design for the newest generation tools, modified the screw hole size to for the 6-32 screw used on the new models. Also added optional retaining magnets 5mmx3mm behind the bit locations to keep the bits from working…
My students and I are developing gridfinity shadow trays to organize the tools. Some fit better than others and most of them are setup for a 1in tool pocket depth. There will be more posted soon. Here is a tray for the M12 Fuel Impact…
CZ 515 - 22LR 10 round magazine Fully DIY 10 round magazine. Tested and working flawlessly with my CZ 515 Tactical. Should also work with: CZ452, CZ453, CZ455, CZ457 & CZ512 Brno Models 1, 2 & 5 Cogswell & Harrison Certus Norinco JW15 &…
Speaker Adapter for JL Audio Woofer
This model is compatible with the lego system.
CZ 512 22LR - 15 round magazine Fully DIY 15 round magazine. Tested and working flawlessly with my CZ 515 Tactical. Should also work with: CZ452, CZ453, CZ455, CZ457 & CZ512 Brno Models 1, 2 & 5 Cogswell & Harrison Certus Norinco JW15 &…
Dardanelles Cannon was used by the Ottoman army to knock down the walls of Constantinople.
As it is sometimes not so easy to drill holes exactly perpendicular to a plane with a cordless drill, I have developed a drill guide for my Makita BP453. With comparable guides, I didn't like the fact that the counterforce of the spring…
Replacement clip to hold your parcel shelf strings up
A rear window spacer for the Smart (453) and the Smart EQ Fortwo. It's used to keep the rear window open a little bit, perfect for summertime. I would only drive with it if it was an EQ model, otherwise exhaust fumes may get into the car.…
I wanted to use this BLTouch cover for thing 4637453 but had to make some adjustments due to the BLTouch Cable being on the outer side. I also added little clips so there is no need to worry about the print weakening over time and falling…
Recommendation: Print with CPE or PCTG. Or something that can withstand high summer temperatures and vibration. I designed this for Hertz CX 100 speakers. But it should fit other speakers as well.
I didn't want to use the crappy ABS mount for the original speakers. New speakers were a bit big for the original so I made these. I wanted to preserve the original harness connector to make install easy. Looks and sounds great. Should…
This model is compatible with the lego system.
Makita BHP453 speed change repair The speed change mechanism relies on a clutch that locks a ring gear. The teeth of the plastic part that locks the ring gear had worn away. Replacement part modeled in FreeCAD 0.21.2 Printing: Printed on…
CZ 515 22LR - 15 round magazine - Waffle Mag! Fully DIY 15 round magazine. Tested and working flawlessly with my CZ 515 Tactical. Should also work with: CZ452, CZ453, CZ455, CZ457 & CZ512 Brno Models 1, 2 & 5 Cogswell & Harrison Certus…
I've made this adapter to fit my JL Audo tweeters. I've also uploaded a STEP file.
A quick design for storing things behind the screen for a Smart ForTwo 453. Attach with double sided tape.
This model is compatible with the lego system.
Dies ist eine Kappe, zum Abdecken der Lenkradverschraubung eines IHC 453. Meinem Mann gefällt es. Einzelteile ausdrucken, zusammenfügen fertig.
Was looking for a solution to hold my phone in my Smart Fortwo without drilling. Holder copies the curves under the navscreen and holds on high bond double sided tape. The holder is optimized for an iphone XS with case, but you can easily…
lego 4215 59349 23405 98280 30022 87421 47847 6082 64453 65735
I recommend printing vertically with supports. This will provide the most strength.
Moved the holes back from the hex slots, thickened the body a bit to support pan head screws. The original (left) created holes, I moved the magnet holes 1mm from the hexagonal area to create solid walls. I also changed the screw head to…
This model is compatible with the lego system.
Motor mount for 45mm EDF type AF45314B, prints without supports. Designed for LIDL chuck glider conversion to RC EDF plane Glue the EDF in the 3D-printed mount using the glue slots. Glue the mount into/onto the plane, cutting two slots…
Update: I eventually ended up buying an aftermarket spare for better durability. Spool cover for Einhell GC-ET 4530. Recommended to print with 100% infill due to high centrifugal forces. Printed with support under the latch overhangs.…
Note by the way! The ABUS U-lock Granit XPlus 540 30cm does not fit through the rims of the Ninebot G30D due to the rectangular shape of the bracket and is only suitable for connecting the Ninebot frame (45 ° spar) to a traffic sign or…
LEGO compatible 4531 Hinge Tile 1 x 2 1/2 with 2 Fingers on Top
This part failed on me and the PCB/LEDs droped into the console so I couldnt see what gear I was in. Not a huge problem since the dashboard shows everything, but it irridated me and gave me a problem to fix with my printer. printed in…
Modelos compatibles con set legos
This is a front protection cover for my Tektronix (Tek) 454 oscilloscope. It has hooks at the left and right side which clip on the side of the scope to secure the cover. I quickly threw this together and printed a few tests for fitting.…
A handle and latch replacement for Frigidaire's mini fridge, model FFPE4533UM. Modeled after the stock handle and latch plate. Includes a high and low latch panel if the fit isn't correct. Does NOT include the tooth column that sets…
I wanted a six-inch dust port for my planner to up the game on the dust collection. After designing it I had to split it in half because it was way too big for the MK4. At the split I added material for several screws to hold the two…
For those times when you cannot wait a week for the real deal/parts. Keep in mind that plastic will compress over time as opposed to the original metal part.
HDD Caddy for the Acer TravelMate P453 Laptop computer. Category: Computer
The cover should be printed in ABS, ASA or reinforced ABS-CF/ASA-CF. For two-part printing on a small printer (220mm bed), ABS glue (e.g. Tamiya 87137), acetone, ethyl acetate (or even nail polish remover) should be used to glue the parts…
Shower knob extension for shower faucet Duschknopf Erweiterung für Duscharmatur für Ideal Standard Brause-Thermostat THERM 50 A4532AA 3D-Drucker: MK4 Material: PETG Slicer: PrusaSlicer 2.7.3 Schichten und Perimeter: Schichthöhe: 0,2mm…
Replacement bottom feet for Tektronix 453/453A
The Thing is a replacement thread insert for the Grohe 47453IPO shower shut-off handle because the original replacement part is very expensive. After the print you need to clean the threads from the support material with some tweezers.…
Standard print settings, I recommend printing Pete, but pla is also suitable, but it will be more fragile
English : This is a fix for the defective part of the lid of a door shelf in a Bosch/Siemens refrigerator with the E-number KGE39EI41/94. The current Bosch part number for the door shelf is 11013214 (old part number: 00745358). The door…
Spare Flywheel cover for repair percussion massager YUNMAI YMFG-B453.
A handle and latch replacement for Frigidaire's mini fridge, model FFPE4533UM. Modeled after the stock handle and latch plate. Includes a high and low latch panel if the fit isn't correct. Does NOT include the tooth column that sets…
Modelos compatibles con set legos
Standard print settings, I recommend printing Pete, but pla is also suitable, but it will be more fragile
Where to mount phone holder in Smart EQ Fortwo 453 car? I found several phone holders but no one is best for my car so I decide to develop something by myself. And it can be used also as pen holder. You can see video here I made lot of…
I've made this adapter to fit my JL Audo tweeters. I've also uploaded a STEP file.
Speaker Adapter for JL Audio Woofer
Recommendation: Print with CPE or PCTG. Or something that can withstand high summer temperatures and vibration. I designed this for Hertz CX 100 speakers. But it should fit other speakers as well.
Bit holder for Milwaukee fuel 3453-20. There are two files, the bit holder and an insert. The insert keeps the bit holder from rotating slightly when inserting or removing bits. See pictures attached to model. The holes on the back side…
The Thing is a replacement part for the Grohe 47453IPO shower shut-off handle. The original grip plate broke so i needed a new one. After many tries i recommend to raise the part in the slicer about 3mm from the buildplate so that there…
Since I didn't find what I needed for a Smart 453 radio holder, I mix and matched some other designs as following to come up with what you see in the pictures. What you need: Modular Mounting System:…
My friend made this… you might die of laughter! The original creator will remain hidden… while his creativity flows on the wide and vast internet, or in this case… pure dumbness and stupidity while making 3D models on tinkercad.
This holder is designed specifically for the Philips OneBlade razor (Model QP4530). It features a smart, compact design that allows for both wall and surface mounting. The holder can be mounted using a screw or simply with double-sided…
ORGANIZZATORE GT453 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante 3D: Artillery Sidewinder X4 PLUS Laser: Mecpow X3Pro 10W
Disk holder for MB-453TRAY-2B so they can be stored properly without risk of damage. This tray is used in MB155SP-B, MB153SP-B and MB876SK-B. The original FreeCAD file is included to allow easy modification. To be sure the dimensions…
This model is compatible with the lego system.
This model is compatible with the lego system.
I designed a part for a chainsaw starter, there wasn't one in my area, so I made a copy from a damaged part. If anyone has a Makita ea3200s saw - it works beautifully. I printed it on a prototype in PLA and it still works well after a…
Print vertically, ideally use fiber reinforced filament but most should work. I used ABS since I had that on hand.
Parts that can not be bought separately, would have to replace the whole mechanism. These parts clip on a metal ball and act as guides for the mechanism as far as i understand it :) Printed with supports on the flat side as you can see…
