Counting matching models…
This Most Popular Clay Texture Roller Set includes a collection of highly requested and widely used patterns. The 4 cm wide rollers allow you to cover larger surfaces quickly and create consistent textures with ease. Designed for easy…
Cat Food Dispenser for Wet Food Pouches Overview Designed for wet food pouches (~9x14cm) Two sizes: Tight fit and loose fit Features Can be printed without support Compatible with popular wet food brands (e.g. Whiskas) Printing Suitable…
This is a super handy clip for the pantry, freezer and just other bags. We use them for chip bags, and freezer stuff. I print them using PLA+, and we have clips that we are still using that have lasted 6/7/8 years in the freezer. And are…
🟢 Circle Cookie Cutter STL File Set – 4cm to 10cm Sizes Make perfect circles every time! This downloadable set includes 7 sizes of circular cookie cutters, ranging from 4cm to 10cm, designed for clean cuts and long-lasting performance. 📦…
I searched for storage box on Thingiverse. I find O3D great design the Modular Drawers 2.0 but its too big for my small things (M2,M3 screws nuts, bullet connector etc.) Because of this i made the smaller version. The drawers knob…
Seems every rotating thing on Printables needs a stepper motor and a programming degree so I made something that needs just 2 mr128 bearings and the rest can be found in the junk drawer. Wrap the wires around the built-in battery holder…
Made some remix,and modify a 14cm version
MOLD CAN BE PRINTED UPRIGHT OR ON FLAT SIDE WITHOUT SUPPORTS this mold is intended for use with wicks dipped beforehand but not required tested with PLA at 3 shells / 10% infill at 150% scale (6cm diameter) there was some leakage due to…
my print settings: Rafts - Brim: NO Supports: NO Nozzle: 0.4 Resolution: 0.16 - 0.2 Walls: 2 Infill: 5% Material: Brand: GraKit Material: PLA Color: Tri-Color Black/Gold/Red printed on Creality Ender 7
Measures 10.7cm tall and has a thickness of 0.8mm
ENG version : Gingerbread House Cookie Cutter as collection 16x17x14cm is not only for X-mas. All models are in 3mf for MK3S+, MINI+ and STL for other FDM. Collection : Front side, Back side, Roof, Side, Floor, Big&Small Window Material :…
NO SUPPORTS NEEDED! Everything is angled nicely, and gaps are short enough that supports aren't needed. I recommend printing on the Y axis (see last image), for stability. Example printed with PLA+ on an Ender 3 V2 Neo, print time was…
This is a simple weaving shuttle I made for my girlfriend. It's easy to print in PLA. I printed it with 100% infill just to be sure but I don't think it's necessary. I also made a Backstrap Weaving Loom , have a look!
A quick pvc pipe cross joint with a 90 degree angle to joint 4cm diameter pvc pipes.
Make perfectly sized cookies, toppers, or crafts with this free multi-size square cookie cutter STL set , designed for clean cuts and everyday use. 📦 What's Included: 7 STL files: 4cm, 5cm, 6cm, 7cm, 8cm, 9cm, 10cm square cutters No…
Based on the rough working principle of the most popular self watering planters on this website. Walls are thick enough so no leaks occur (tested this myself, sadly I no longer have access to the final prints) Theoretically it's possible…
Add a modern touch to your bakes and crafts with this free arch cookie cutter STL set , featuring 7 sizes for total versatility. 📦 What's Included: 7 STL files: 4cm, 5cm, 6cm, 7cm, 8cm, 9cm, 10cm arch-shaped cutters Prints flat with no…
you can put nfc card in this pokeball or any you can....
large version that needs to be printed in several parts. The parts need to be glued together in the end. For smaller printers, parts may need to be cut. Happy printing
Perno............4cm*3mm arandela........0.5; 1.0; 1.5; 2.0; 2.5; 3.0
Made it to a 4 piece so it can be much larger. Added a picture before the assembly with the Kingston usb for size.
fan (140mm, better some speedy fan, 1800-3000rpm at top speed) is mounted to top part, then bottom part (coupling for air purifier filter) is screwed to fan base.
Dies ist eine Inneneinrichtung für den Märklin Schlafwagen 4064
I build hand-puppets and made these type of movable eyelids by hand in the past. This is my first working model for simple eyelids. They fit exactly over a 4cm Ping Pong Ball. Category: Robotics
This is a remix of bias tape maker from https://www.thingiverse.com/thing:3880491 by Oscarko for 4cm tape Category: 3D Printing
Print it standing on one of the open ends. No supports needed, but a brim is recommended. When using the tool, cut a 4 cm wide strip of fabric with a narrower tip. Feed it in from the flatter side and feed it through with the tip of your…
This is a PaperSafe box for printing in darkroom. It is resistant to bright light and gives quick access to photo paper without having to constantly open and close the paper package. The size is adjusted for printing on a Bamboo Lab P1S…
This small screen will cover your pots drainage hole(s). It holds the soil back, whilst water and air go through easily
As there seems to be some sort of ghost in my office who steals my rulers, I always need a ruler, but never have one. So heres a quick print for a 14cm Ruler (15cm total) which prints in 16 mins. Ideally you want to print the numbers in a…
it's a shrimp tunnel that you can put in your aquarium soil so the shrimps can hide and explore while you can still see then trough the glass
The way you can store your filaments in the Ikea Samla boxes is great. But then you need an cupboard to place all your Samla boxes in. And I did not want that. So I created two holders that combined can hold a full Samla box. I have…
A smaller redraw of the 20cm version https://www.printables.com/model/628369-al-hambra-alhambra-rosetta-arabesque-lamp-20cm Preferably print with a brim, no supports needed, for best result, at least 3 walls
Shamelessly remade from pictures of a Noctua product that does the same thing. An adapter to mount a 12cm fan to a 14cm fan location. Print instructions Nothing special. Any type of filament and settings will do the trick.
Not only one prong, but two for billboard-style labeling ; ) Measures 10cm tall and has a thickness of 0.8mm
This is a heart shaped pendant or keychain. Its width is 4cm and its height is 1cm. It prints easily when you use supports.
Designed to fit a Jensen CS10 Powered Bookshelf Subwoofer cabinet, but easily scaled to fit other audio equipment. The original rubber leg had a steel washer to make the screw hole rigid, but I've been able to skip that piece. The screw…
Very nice and light sheath by @MatthewGTaylor , rescaled to fit the 14cm/6in version of the knife. I like to take this knife with me for cooking on my travels, so a sheath is a must. This is my first remix: please let me know in comments…
Slice and print! This will come out at 240mm x 240mm so make sure your printer can handle that size! on my K1 Max its a treat! These are perfect for building scenes with your nanoblocks as you can see from the pics! Big <3 to the original…
Intended to stick some flat magnets on the bottom to put it on a whiteboard, but also usable on paper. I only printed the 24cm version because it is big enough for me. Would be nice to see the 30cm in reality so I'd be happy if someone…
Der Scheibenhalter bietet Platz für 14cm x 14cm Zielscheiben. Alternativ kann seitlich eine M6 Gewindestangen zum tragen von Silhouetten eingesetzt werden. Das Modell besteht aus mehreren Objekten, die mit Prusa Slicer getrennt und auf…
Fan holder to put in four 5.25 slots in the front of old PC case to create an airflow You probably should add a mesh between the main part and the ring to protect the fan from inquisitive fingers (I used superglue to put everything…
I created some amplifier circuits for my virtual pinball project: http://lilmikey.com/2017/02/16/virtual-pinball-cabinet/ I build them on small, cheap uxcell 4x6cm perf boards:…
Material sparende Rampe für die Türschwelle
Info: simple 14cm hanger for metallic hole wall (1cm square holes) 40/50%+ infill, 3 perimeters I have used PLA (so it is not that flexible) no supports
Drum sticks holder 2pcs. No support print. For frame tubes 40-44cm in diameter. I use it with my NUX DM-7X, I'm sure it'll work with DM-7 and DM-8 as well. For other drumsets measure your frame tube diameter first.
Keep your small essentials organized and easily accessible with the Mini Pocket Slide Box . Designed with a smooth sliding lid and a secure "click" closure , this container ensures your items stay safe while on the go.
I printed with PLA, 0.2mm height and 25% gyroid infill. If you want more precise square you could do some precise sanding. Holes B-D form silver ratio Θ*10mm=~24.14 A-B is Θ/2 The silver ratio is Θ = 2.414213… = 1 + sqrt(2) It derives…
TV riser feet to prevent the soundbar from blocking the screen.
An organizer for both AA and AAA batteries Dimensions 24 cm x 5 cm
Ich habe eine kurze Anpassung gemacht und den Sockel um 1.4cm erhöht, so steht die Tasse näher an dem Siebträger. I made a small adjustment and raised the base by 1.4 cm, so the cup sits closer to the portafilter.
Dies ist eine Inneneinrichtung für den Märklin Schlafwagen 4024
Razer Core X Chroma 14cm fan adapter silent mod you will need some longer screws
This is a 4 hour print with a lot of waste. If I had to do it again I would cut it in half vertically and print the front side and back side separately and then glue it together to save filament.
Ramp with wave pattern for more grip - 4cm high Printed with NO Supports in PETG Size: 30x20x4cm Furthermore, I added 4mm holes to connect multiple lamps together with screws.
Ein einfacher, schnell druckbarer Einsatz für jeden Kugelfang mit 14x14cm Zielscheiben damit man auf Streichhölzer oder Zahnstocher schießen kann. Der Abstand zwischen den Streichhölzern / Zahnstochern beträgt 10mm, sollte Bedarf an mehr…
I try to make little wooden spoons You first have to turn something akin to a babies rattle and then mount that ball on a different axis . I found Alan Strattons design (…
“foot” is 4cm Ikea Lack leg extension I needed to regain 180mm maximal print height for Prusa MINI+ below Lack table. “foot2” is 4cm additional extension I needed for placing 4cm thick concrete slab between printer and absorber (old gym…
Simple 4cm standoff for 1HE 19Inch rach equipment. Through holes are M6 for M6x60 screws. Printed in PETG with 50% infill for heavier equipment.
My son who is obsessed with his nanoblocks, has hundreds of spare and left over nanoblocks and where to store them? This original mesh uses the 24cm x 24cm nanoblock base plate I remixed, and uses that as a slide lid for the storage box!…
Card & Cardboard Cutting Jig – 10x14cm Precision Template Description: Easily cut cards and cardboard to a perfect 10cm by 14cm size with this durable cutting jig. Ideal for trading card projects, arts & crafts, and prototyping, this jig…
Replacement (and possibly upgrade to R3 version) Z top-mounts for the Prusa MK4 printer with extensions to mount an IKEA Silverglans/Skydrag 16"/40cm light bar. (Tested with Silverglans; IKEA number 305.286.70). The Skydrag/Silverglans…
For restaurant-style service, use this Pastry Ring to assemble your side dishes and starters. This Ø 8 cm x H 4 cm Pastry Ring is sturdy and practical. PLA + Unsupported Layer height 0.2mm Thickness of bottom top: 0.8 Filling : 30…
Useful for holding 8 x Wera screwdrivers and Wiha hex drivers. The same part can be used for the top and bottom insert. The holes are 5mm diameter. Inspired by this model but I found the top holes too big and the bottom holes too small…
Check the description in the the original post for 10cm version. I have printed only 10cm model so far, they are on the photos. Pls comment if anything is wrong
Learning resource 14cm square number puzzle challenge using big scale numbers from 1 to 4. Printing: The model is split into two .stl files for easy printing in multiple colors. Add a pause in the G-code to change the color between the…
Info: simple 14cm hanger for metallic hole wall (1cm square holes) 40/50%+ infill, 3 perimeters I have used PLA (so it is not that flexible) no supports
I made this model to build animatronic eyelids for puppets or robots. This version of the eyelid makes it easier to attach a bowden cabel. Instructions Can be printed without support. Category: Robotics
14cm Target Air Rifle / Airsoft To use the last of the spools minimal filament and very fast prints
Horizontal Lamp Designed for red light therapy lamp MITO LIGHT Bulb 3.0 ( https://www.mitolight.cz/mito-light-bulb-3-0/ ). can be used for any bulb with a 4cm socket. You can support me with Bitcoin or Lightning network HERE or normal…
Print 4x for a complete set
Basic mount for the 14mm fan to cool down a little the Moza R12 base. I printed it with PETG as it needs to bend a little. Connect the fan and the bottom part with screws. Put on the cover. Then just connect it wit a base using screw…
It is a small table that you can attach to the bedboard. It is compatible with 4cm thick board. Compatible with IKEA beds
This is used to adapt a layer cooler on the prusa i2 for enabling it to use 6cm fan. Print instructions Category: 3D Printer Parts Summary This is used to adapt a layer cooler on the prusa i2 for enabling it to use 6cm fan. Instructions…
Foot for Schulte scewed shelfs.
This shroud is printed in two parts that slide together. Included is a M12x1mm nut for the proximity sensor. You also need to print two of the 5x6mm posts and remove a small bridge between the holding posts for the fan on the shroud. I…
The pot is stable enouch to carry a massive rock about 5kg. The pot allows plenty of oxygen to reach the roots and it is possible to stretch wire over the surrounding eyelets. The pot has a diameter about 24cm and a heigh of 6cm. The pot…
Extended the holes 4 cm to clear an HDMI or DisplayPort cord that comes out of the back of most monitors.
The kids got 24 small booklets in their advent calendar and to keep them all together they needed a case. It is very simple design with two inside walls to keep the books tidy. I found it quicker to design it myself rather than search for…
The Ikea Stoftmoln 24cm ledlight do not have any room between the roof outlet and the lamp so i created an octagon that gives 40 mm space to be able to house the powerconnector. Screws used to fixate to roof was 4 x 55mm. The Octagon uses…
A watering can based on the 14 cm/50 3rd Year Type naval gun. It holds 2L of water and is easy to use! I am not a military model hobbyist, and this model may not be historically or technically accurate. I referenced several pictures of…
I use @Strankler's adapter to stack two Ikea lack tables: https://www.printables.com/model/11146-ikea-lack-stack-adapter But I use my own 4cm leg extensions with 3rd lack desk (for getting full Prusa MINI+ 18cm print height with Lack…
Lesson Plan and Activity: With a partner, design and create a single custom Tensegrity Structure of equal complexity or greater as the tables depicted above. Parts List: 2 connector pieces, 1 bottom base piece, 1 top base piece 10 small…
This is similar to previous weed fin but instead of the airfoil increasing around the diameter this fin decreases chord length. Also add bulbs on tips to reduce tip turbulence. Annular fins generate more lift for less draft so in theory…
Tappo Copri Foro Muro Caldaia diametro interno 12cm / esterno 14cm
ENG To match my 40x40x4cm stone border, I designed a poop container. It features the Anycubic logo and my name. These can be removed in the slicer if you like. Please note the raised feet on my Kobra 3. They are 10mm higher! Enjoy! DEU…
These are organizer boxes that fit into a Rotho Frontbox. Each box includes a slot for a paper label 57x35mm to mark the contnt of the box. Printing woth support structure is required
Sturdy saucer plate for pots with ridges to allow water flow. Should be easy to print waterproof with PETG because of the sturdy construction. I printed it with enough bottom layers to avoid any empty space. I also added modifiers to make…
Uchyt na Tescoma Delicia chladici podnos s nizkym poklopem o prumeru 34cm. Tento uchyt funguje take jako zamek drzici poklop na chladicim podnosu. Doporucuji pouzit PETG kvuli zdravotni nezavadnosti a nizsi krehkosti. Pokud pouzijete PLA…
I'd like the sofa to be higher so that the laundry doesn't fall on the floor and there's less dust collecting under it. Print 4 legs, PLA or PETG, 20% infill, without supports . For reference: leg diameter 60mm PS: These parts haven't…
A compact 8x4cm junction box designed specifically for low-voltage wiring connections, cable extensions, and transition splices between different cable types. Featuring dual M16 threaded ports on opposing sides, it allows you to secure…
Ecken für Sesselleisten 40x16 mm mit Stift zum zusammenstecken
a 12cm x 14cm box with a chamfered edge on the inside to insure a correct fit, a 4mm wall thickness on the sides
Semi-hydro base insert for 24cm IKEA FNITTRIG . Fill pipe hole is for 20mm OD PVC pipe (seems to be commonly available in Singapore, probably a standard metric pipe size?). Water level indicator hole is for this water level indicator from…
Sadly I left some markings on my tabletop when working on a 3D print. That's why I created this work-mat which helps me in finishing my projects. The mat is compatible with my "standardized" pin. 23 x 24cm
Please like before downloading the model. Thank you so much for your support ✌ This is an older model; find my latest models on Instagram @artmancults. bait model and bait form for fishing for predatory fish 5mm cutout for plastic eyes…
Peugeot Clermont 24cm salt mill Print Settings Printer Brand: Prusa Printer: Prusa Clone Rafts: No Supports: No Resolution: / Infill: / Filament: / PLA black Notes: / Category: Kitchen & Dining
Please like before downloading the model . Thank you so much for your support ✌ Follow me on Instagram @artmancults for more models, prints and updates: https://www.instagram.com/artmancults/ bait model and bait form for fishing for…
BECAREFUL: Reduce the size to X=33.7968mm Y=33.7989 Z=122.3958mm or X=10% Y=10% Z=10%
![24cm x 24cm Nanoblock base [6 x 6 bases]](https://media.printables.com/media/prints/679270/images/5338491_ff1848f4-8c2a-496c-8340-36c63d579e78_a63f4ffb-7f82-47a2-9bdd-a7ad6bedf5c3/403611500_1100982067999748_3636619978286844531_n.jpg)
![Nanoblock Storage Box [fits 24cm x 24cm plate as lid!]](https://media.printables.com/media/prints/681549/images/5359694_f7414c27-9ac2-4c5f-977e-fcb4b7dcb48a_dcb3f411-564c-4a5b-87ee-7cb81bc9d0a9/box1.jpg)
