258 models
This model is a remix of another glider but I wanted to make it faster so I designed a hook for it. I went through 4 iterations of the hook to make it strong enough to withstand hard impacts. I've printed more of these than I can count,…
3D Model Description This ultra-lightweight, highly portable 3D printable smartphone stand features an intelligent mechanical design that allows it to fold completely flat into a footprint smaller than a standard credit card. The Problem:…
3D Model Description This ultra-lightweight, highly portable 3D printable smartphone stand features an intelligent mechanical design that allows it to fold completely flat into a footprint smaller than a standard credit card. The Problem:…
remix, added honeycomb on the back
Originally published here: Samsung Galaxy A32 4G a325 case by tato_713 - Thingiverse This case is for the Samsung A32 4G (models started with a325), the 5G version is a bit bigger. For the 5G version (a326 models), see this . Some of the…
____________________________________________________ Update 21.02.2023 Updated ALL Names for better understanding which part is for what it does and which revision and sorted them in folders. Over the years, the package is massive, I…
This was made with an SFX power supply and AMD RX5700XT in mind. I highly recommend you use a gpu “blower” style cooler as it will be much easier to cool. During assembly, make sure the PSU fan is facing the outside, otherwise it will not…
Kurzanleitung: Schichthöhe: ≤ 0.12 mm Infill: 75% Gyroid Drucker gut kalibrieren Bett leveln für beste Ergebnisse Flugtipps: Leicht nach oben werfen, nicht zu stark Kleine Anpassungen an den Flügeln verbessern die Flugweite Egal ob Sie…
This threaded adapter converts from 3/4" garden hose female to 15/16" faucet male. Make sure to use a washer on the garden hose side. There are two version of the .stl file, one with a built-in supporting ring (break it off after…
After downloading and printing an airpods/watch dock from thingiverse, I recognized that the hole for the watch charger was to big. so i decide to designed one from scratch and decided to share the fusion 360 file so everybody can…
Воронка для маслозаливной горловины автомобиля Тойота, двигателя 4GR-fse, резьба М37х3мм Funnel for oil filler neck of Toyota car, 4GR-fse engine, thread M37x3mm
Yashica 124G Lens cap. I printed it in PLA with 0.4mm nozzle and 0.2mm layer. It fits snug!
Bay 1 lens/sun hood, for all cameras with bay 1 bayonet. This was designed in INCHES. Have to convert to mm for printing (2450%)
Deutsche Version unten. Parts required Adapter board TH3P4G3 with ATX bracket GPU with max 3 slots height. Length is not relevant, you can print as many externders as you need ATX power supply 4 screws to mount the power supply m3…
IF YOU MISS SOMETHING - LOOK in the original V1 package. There are multiple Helix Holders, multiple bend helper for different diameter and so on. I dont wanted to just copy everything here. So, now to the V2: Hi, this is the V2 version of…
This is the R4G extruder for Prusa printers, where the G stands for Greg or Geared. It's a DIY "Bondtech upgrade" that requires a very limited set of additional parts. It is derived from the Prusa R4 extruder of the MK3S (…
Tired of the same old whoop frames breaking? Whatever your poison 1s or 2s, this should fit the bill. Yet Another rendition of my past designs. An actual whoop 64mm size with 31mm props and the latest brushless motors along with all the…
This is a direct replacement of the Profoto Air 2.4GHz Remote Transceiver shoe mount. The profoto shoe mount breaks pretty easily and is a couple hundred dollars to get it repaired. I've been using this to replace well over a few dozen…
A smartwatch stand for my kid's 4G/GPS smartwatch produced by Garett - model Trendy 4G. The magnetic charging cable slides into the slot and is hold there in place.
USB micro-use/typeC cable or 5V dupont wire power supply Hardware: ESP8266 D1 Mini | W:23.2mm X H:34.3mm HLK-LD2420 | 20mmX20mm Dupont 2.54 X 2pcs (Optional) I have a spare Xiaomi motion sensor base, connecting to the case with a M3*8…
Radar dish support for HLK-LD2410C motion sensor mmW 24GHz. Printed with 0.4 nozzle, PLA, with organic supports.
360 degree wheel. Bolts onto either the harmonic balancer in car of a 4G63 or the crank sprocket using the harmonic balancer bolts. To install, attatch the hub to the car, then slide up the wheel and align it to the hub. Using 2 interior…
Inspired by Youtuber @makerunit's ITX PC design , I designed an enclousure specifically for ADT Link UT4G board. Main features: 3 slots GPU with 392mm length. (PNY 5080 as in the photo) and full size ATX PSU. All parts fits in 235x235…
The previous owner of my Audi A6 C7 (Facelift) had lost a couple of the Isofix covers. I found a model online which works really well. Credit to the original author over at…
This clip acts as an adapter to hold a PET bottle upright inside a flimsy backpack. It uses any existing loop or clip for a hydration pouch inside the backpack. Use 2mm paracord to create the loop, tying a knot at each end to prevent it…
This model is a replacement I made for the 2.4ghz mouse dongle shroud of my Razer Basilisk X Hyperspeed that snapped in half. I tore apart the mangled original shroud, put the PCB into the slot of the print, and then put the metal USB…
This clip was designed to serve as an alternative to nail-down electrical wire clips. The primary goals were to hold the wire as tightly as possible with only one screw and to be easily removed if needed. The thickness, placement of the…
Dieses Teil ist zum reinigen von Trapezgewindespindeln mit 8 mm Durchmesser. Print Settings Rafts: No Supports: No **Resolution:** 0,2 Infill: 25% **Filament:** 3DJake / extrudr PLA Tough / NX2…
Just added a simple logo. Works with mano Yashica TLR cameras (Mat 124 / 124G etc) Category: Electronics
Salut, Voici un modèle pour simuler plusieurs pièces empilées qui ne consomme que 4g de PLA. A imprimer en mode vase. Il suffit d'ajouter une pièce d'origine gravitrax au sommet de l'impression pour assurer la compatibilité.
I modeled the insert for the Ryobi 9-inch band saw (model: BS904G) just in case I ever lose it (part number: 089079005002). I went ahead and made a zero-clearance insert for it, too. I have to say, I like the zero insert better. The zero…
Import the files as a single object, then scale 10% and divide in objects, now you can colour the items as you like
Thanks for supporting me: Patreon: https://www.patreon.com/dm4ds Paypal donation: https://www.paypal.com/paypalme/dm4ds BMAcoffee: https://buymeacoff.ee/dm4ds Bitcoin: bc1qf426e46h6kdtmws4cjnu6wa3wtzy8qvctq9j9u Etherium:…
An orange pi zero 3 with 4g LTE hat running OpenWRT, a good device for a small travel router, the 4g lte hat only sold in Indonesia and it is a preorder, if you want it you may message the seller at Tokopedia BOM M3x10mm bolt 8 pcs…
This is the model of Logitech G102 54gm mod video from the youtube channel ABA I collected it from sketchfab abazibiz ( https://sketchfab.com/3d-models/logitech-g102-custom-shell-4d0cdf9a50e0479691c1cf2b92e3a54a ) but its a single STL and…
This is the tiny, convenient, cheap, easily-EDC-able meshtastic module I've wanted since I got into these silly little radios 8 months ago. I kept waiting for somebody to make it (NextGen3D's case was close), but finally I decided to be…
This file contains my personal documentation for integrating an RTX 3050 GPU with the EXP GDC TH3P4GAN GPU Dock, complemented by a custom-designed 3D-printed case. Inside, you'll find detailed design notes, CAD files, assembly…
ExpressLRS rocks! This little mount is designed for the TBS SourceOneV3 frame, to attach the small 2.4GHz T-antenna to the back of the drone, right beneath the mount for the video antenna. The holes for the poles of the frame have a…
I designed it all on my own. Hope it help. You will need 2x M3x27 bolts and 2x M3 nuts Rest of bolts are included to gun
A simple and practical pen clip for notebooks, notepads, and memo blocks that do not have a built-in pen holder. Just clip it onto the cover or a few pages and keep your pen always attached to your notebook. The design uses a slim money…
I scanned an rs6 bumper deflector and i printed it. it's not 100% the same as original and may require some work but it prints out. I own a prusa mk3s+ but the software did not see the scan so i printed with Bambu Lab. In the second…
A simple lightweight putty knife to fill holes and more! About <30min print-time.
I recently acquired my first vintage TLR camera, a Yashica Mat-124G. Since I haven't yet gotten used to the viewfinder being mirrored, I find it particularly difficult to control the tilt of the camera to capture horizontal or vertical…
This is an antenna mount for the 2.4Ghz ExpressLRS antenna for the GEPRC Smart35. It can be used on the back or the front, depending where you mount your receiver and the length of your antenna cable. It may work on other frames but it…
Soporte para ROUTER MIKROTIK CRS125-24G-1S-2HND, para montar en rack de 19"
It the simplest holder i could come up with. May add a ball-joint to the back, in case i want to mount in a differnt one, depends, how well it will function.
The most compact and Filament-saving battery organizer . space for: 24x AA, 24x AAA, 5x 9V realy low filament cost only 54g optimal filament: PLA [This Model is already uploaded on my Makerlab Account] https://makerworld.com/en/@morax…
---- new model without battery ----- In the free applications for home automation, you can create your own sensors to control/detect the environment. To create a detector/sensors, you need to have some electronics cards to create a new…
techno camon 20 pro 4g/5G smartphone case
Took the idea from @alignboytw on Thingiverse ( https://www.thingiverse.com/thing:4684057 ) and created the same basic clips for wire spools in 5 sizes. Hope somebody find this useful! Print instructions Category: Organization Summary…
This is a wall support for ZTE mf 289f 4g Modem. There are two holes to connect the SMA antenna adapters to ts9. There is also a large hole to pass the power and network cables. The bracket must be fixed to the wall with two dowels.
Lockheed F-104G Starfighter Wall Art Silhouette model. Adjustable size. I accept model suggestions.
This design has been created with minimalism in mind. There are better ways to make a card holder! But this one is simple and uses just a smidgen of filament (Just 14 grams, less than 5 metres). In the future, I'm going to look into…
A small, lightweight clip perfect for sealing bags or spice packets — under 4 g of filament. Printing Notes Print in PLA or PETG No supports required Quick, simple, and practical little model
This is a remix from David's version that removes the letters, slightly speeds up printing and removes the need for supports. I tapped the holes in the side of the front to M3 and used short M3 bolts to screw the rachmounts to the switch.
I don't like how the antenna takes some unnecessary space on the T14, since the original 2.4Ghz antenna is really small there is no need for that big enclosure. As long you don't use vertical polarized this mod would not cause any…
Have fun with my Monitor Meowth! Use the settings proviede in 3mf file - supports have been tweaked to work well. Matte PLA recommended. Mono- and multicolor 3mf version available! Two versions with different Gap sizes: 10mm for slim and…
This is a compact, 90-degree cold shoe adapter specifically designed for the Yashica Mat-124G . The side-mounted accessory shoe on these cameras usually leaves external light meters facing sideways. This adapter reorients the shoe by 90…
Drop-in replacement for the standard flywoo LR4 antenna mount. Print without supports(turn the holes towards the table). Use TPU plastic. The antenna should slip into the mount.
Only 1.4g filament for one Star. If you are using a translucent FIlament, you can adjust the thickness accordingly. This two i like the most: Last Version with spiral WmvS. 1.432 A5.1 WmvS. 1.3 without spiral 0,4mm Below this files are…
Fast and small, the Us4gi Pod is the best choice for a support drone. Available in White, black, and brown-ish. This one is a free(Yes, go ahead and download!) figurine from the Capsule chibi project at https://www.patreon.com/capsule ,…
24GHz mmWave Sensor for XIAO - Human Static Presence is a expansion board for Seeed Studio XIAO series. It is an antenna-integrated, high-sensitivity mmwave radar sensor that is based on the FMCW principle. Combined with radar signal…
A V4N4G0N Keyboard case with a handle to throw it away if you lose in the game. It's compatible with V4N R3 PCB and Monorail.
TR8x8x4G bedeutet: Trapezgewinde Ø8 mm / Steigung 8 mm / 4gängig Material: PLA Druckereinstellung: Layerhöhe 0,16 mm / Infill 100 % / Support 10% Gutes Gelingen und über ein Like würde ich mich freuen. Good luck and I would be happy about…
Piston Ring Compression tool for 4G63 85mm std Made out of pla might need some light sanding just give it some more walls
Inspired by this sim tray , I decided to model my own for this phone since I needed one in a pinch. This model might be revised a little because it does not fit snug and is not waterproof (though I imagine no print can truly be).
The shape and thickness of my new monitor does not really allow positioning the BenQ Screenbar on top of it. Furthermore the slightly curved display isn't an ideal mix with the non-curved LED bar. So I've created this adapter plate to…
Lenght for the Elements: 59,7 mm - Reflector 50,2mm - Director 1 49,5mm - Director 2 48,7mm - Director 3 48,1mm - Director 4 47,4mm - Director 5 Print Settings Printer: FLSun Cube Rafts: Doesn't Matter Supports: No Category: Computer
The Shopping Cart Token has the same dimensions than 1 Euro Coin Update: 01.05.2025 I made a stronger Version of the V2 Model and did some minor Tweaks. With 15% Infill you need only 1,72g Filament and with 100% Infill only 1,83g.…
This is a simple case for the Flysky 2.4GHz 6CH FS-X6B Receiver which does not come with a case. So is not very protected. Printed in ABS 0.4mm nozzle 0.3 layer height. May need a bit of a clean up around the cutouts depending on how your…
Spacer for the fuel rail on a 4g63 engine. Print in material that will hold up to being in an engine bay! Category: Automotive
See description in the main model https://www.printables.com/model/1020388-esp32-d1-mini-ld2420-24ghz-mmwave-radar-sensor-esp Difference : ESP32 S2 mini used and the radar LD2410
Thanks for supporting me: Patreon: https://www.patreon.com/dm4ds Paypal donation: https://www.paypal.com/paypalme/dm4ds BMAcoffee: https://buymeacoff.ee/dm4ds Bitcoin: bc1qf426e46h6kdtmws4cjnu6wa3wtzy8qvctq9j9u Etherium:…
A simple 10" rack mount for a cheap SKS3200M-4GPY2XF switch. Model is available on OnShape if you want to remix it.
Re-designed the original back parts of HOLY helix feeder to fit on a Bullseye 10kHz TXCO LNB and beeing printable without supports. For my printer the M112.5x3 threaded parts work best with the original cover. I also added a M112x3 and a…
A lightweight spatula with angled edge to make applying and spreading thermal paste easy.
Ever wondered what practical thing you can print with last 11cm of filament? Search no more as this bookmark only cosumes 0,34g of filament and is done in 2 minutes. It's just 2 layers heigh (0,4mm) and fully functional. Recomended…
Case for the SIM7600G-H-M2 4G when not being used as a Raspberry Pi HAT. Waveshare Wiki for the device: https://www.waveshare.com/wiki/SIM7600G-H-M2_4G_HAT Printing This was designed to be printed on a resin printer, with the flat side of…
I designed this holder because I wanted to mount the router on the wall in my camper van, but couldn't find a suitable mount. It is now attached there with adhesive tape (Nanotape). Print upright, no support needed!
extra cable management cylinders due to the canvas only coming with one, print with your printer's 'fine' preset for more cable clutch power
This stand has a slot designed for the magnetic charger connector and cable, providing a secure place to charge Carneo Guardkid+ 4G Ultra smartwatch. Decorative Details: It uses pieces of 1.75mm filament as decoration. Cut the inner…
Just got my new Quickmill Luna espresso machine and wanted to create some additional helper parts. First step was to rebuild the included 3-eared 58mm portafilter and 14g sieve. Maybe someone else can benefit from this. If you find…
This is a replacement for a gear that often fails in the Bosch MUZ4GM flour mill. Printing I recommend slicing with two perimeters and 100% rectilinear infill. While in general it is more effective from a strength perspective to slice…
AntiHunter Perimeter Defense Systems, DIGINODE 2.4Ghz (Original Enclousures) PCB store: https://www.tindie.com/products/teamantihunter/antihunter-digi-24ghz-wifible-node-pcb-only-2/ Follow me: https://x.com/SirhaXalot_ Follow Luke:…
5 perimeters at least, and pay attention to the orientation. It uses supports
Mazda 2 (Demio) speaker adapter for scanspeak 18W/4434G00 and can use for others Mazda depends on year make model. Extra Parts : Brass insert : M4*7*6 or M4*7*6 Screw : M4*12 Recommended print with ABS or ASA give more rigid and withstand…
honeycomb front panel + UT3G frame back panel
I made a funnel for my evo, works great. I printed it in PETG, 4 walls, 10% infill.
WARNING Comply with your local law regulation regarding transmitter power. Failing to do so expose you to fine nor jail. You're warned. The F is that Boosting the RC/Video link of your drone that use 2.4G with directional antenna and…
This is a custom-designed flexible phone case for the Nokia 235 , optimized for printing with TPU filament . It is designed to protect the device from drops and scratches, while maintaining full access to the keypad, screen, camera,…
A simple mount to fix the power supply of a LG 34GN850 to your simrig or any 4080 aluminium profile. Print with Pla and use supports under the corners. Use DIN 912 M6x16 to mount to you rig.
No glue requried, just press fit works fine. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 200 Infill: 20 Filament: Generic PLA black Category: 3D Printing
The external antenna adapters provided by TP-Link were not very useful for my setup. I made a small enclosure for the adapters, so the cables and antennea don't wiggle around anymore. It's an easy 2-part print. Each part takes one adapter…
LTE Indoor Router - Zyxel LTE3301-PLUS The Router has mounting holes on left and right and manufacturer do not sell mounting brackets for it. I wanted to mount it on vertical space - so i designed little brackets for it. You only need to…
Bought a HPE 2530-24G-PoE (J9773A) but the fan had failed, a replacement Noctua NF-A4x20 12V PWM 40mm fan was slightly smaller than the original so needed a spacer to fit snugly without being able to move. Realistically probably not…
**Changes have been made after printing test pieces This enclosure is designed specifically for the Raspberry Pi 3B+ paired with the Waveshare SIM7600G-H M.2 4G LTE HAT. It creates a compact and secure housing for portable LTE router,…
Print it laying on the side. You can figure out the rest ;)
This TPU part holds the back antenna (2.4GHz ExpressLRS) on a iFlight XL10 frame. Print on the side (see pictures).
