Counting matching models…
To check for dimensions and tune accordingly, this cube should be printed as is in 30x30x30 mm. This guide can help you tune your printer in according to this model - AndrewEllis Print-Tuning-Guide If you want to tune your printer for…
This is a remix of jphalip's Voron 2.4 A Drive PG7 umbilical mount, which was a remix of Hartk's PG7 mount. The endstop carrier in jphalip's model was from Minsekt . In this version the PG7 hole location has moved slightly to be centered…
This is a remix of MrTeliP and Voron 2.4r2 PG7 Cable Gland and Endstop, which was a remix of jphalip's and Hartk's PG7 mount. I added a new endstop mount so you don't loose any Y print area. The bumper of this mod from Cris Persi is…
Traveling friend needed a cup insert fix for her vehicle. I found two designs available online but each of them had problems with fitting and features. One design had rounded inserts for the cup holder, my friend's 4th gen had a rounded…
Remix for adding Voron logo. Remix and adding longer cover version for closing the expose wires.
These mounts allow the replacement of the stock dash speakers with 3.5" aftermarket speakers. I designed these around the Infinity Reference REF-3022cfx 3.5" speaker - compare your speaker specs to these to see if the mount might work for…
This is a remix of the referenced Nozzle Scrubber by FunFunBoy. This version changes the magnets to 10mm and increases the count to 3 on each of the Bucket and Holder parts. Minor changes were made to the brush holder to accommodate…
Printable drawer for bottom cubby in 5th-Gen 4Runner center console. Supports recommended for the pull handle only Recommend adhesive-backed felt on the bottom and rear corners for best fit. RAM ball variant available here:…
These covers allow for hidden cable routing for wires going up the Z Extrusions, they also have a cutout in case you didn't leave enough room under the Z Rails(most people don't :P). In case you want to add some extra pop to your covers,…
Revision 1: 2025-11-15 Revise Amazon links per currently available items Reflect Happy Hare's incorporation of Filamentrix's Filament Cutter into its code base Introduction The Voron 2.4R2 with Happy Hare provides a means to cut off the…
All files are uploaded in .3mf formats only. You can get separate the individual bodies as needed from this file. Source files are not available due to IP theft prevention. You can request modifications in the comments if necessary. All…
For those of us with a 5th generation 4Runner, you know that little cubby space by the shifter is not very useful, because stuff flies out. I made a little cubby drawer that will fit in that space, that is held in place by friction. This…
The design was inspired from MizzrBear's design. This is not a remix
This is a dashboard switch-hole cover plate for various older Toyota trucks and SUVs. The original came from the other thingi site, item number 2446920 by bgsteveg . I improved it by adding some gussets to keep the tabs from cracking off.…
This is a scale update remix which resizes a Tacoma center console insert to fit a Toyota 4Runner Gen5. There are 3 different variations. One is a single tray. Another is the same tray, but with a center divider and coin holder. The last…
This is a modified 2.4r2 300mm back-center skirt with a central hole for passing a cable through. There's a slot for a zip-tie to hold a the cable in place. Update 1 - Added a 350mm version
I seen how expensive the badges are, so design them. (Made it it for a friend) Perfect size to the originals Recommend print in ASA plastic with 100% infill (UV resistance) Small LIMITED badges are for the sides (X2) This look me a long…
Replacement pulls to release the rear seatbacks.
This is a model of the small plastic grill clip used to secure the grill onto the front of various Toyota vehicles. Based on the description of the part it may also be used in the interior. The model isn't an exact copy of the original as…
Toyota 4runner gen 5 cubby drawer
There are two versions of the model. One is just a blank for the center console. The other is for a flush mount USB port. Models are set in the correct printing orientation. The clips do not need supports. For the USB model use the in…
Update: Fixed slope on top of cup holder to better print upside down; the original model has stringing around the inner rim due to the gradual slope. Original model is great, but needs to be larger to fit. The model in this post is 101%…
Mixing using EBB36 and LGX lite with cable chain hook.
Voron 2.4r2/Trident Sturdy handler remix with voron logo on front and back.
The M5 x 10 cap screws need to be replaced with M5 x 20 cap screws. Hardware requirement: 4x M5 x 20 cap screw
I have modified the Afterburner Voron 2.4r2 print head for the Bambu Hotend. I am providing the front and rear printhead bodies only. For the adapter, see Sam Schmidt's design for the Bambu hotend. In addition, Mr Telip improved the…
Yet another Toyota 4Runner Hitch Cover - this one has a hole so it can be secured with a 5/8" hitch pin. This is a dirty remix of the original model. It's “dirty” in that I just grafted an extension on without a whole lot of regard in…
The 5th gen 4runner has been in production for a long time and dont have a normal spot for phone especially a big one. it always ends up falling or getting stuck somewhere so i made this to help. Designed to printed without supports so…
Created a case for the ESP32-2432S024R also known as the CYD. It has a cutout for the USB-C port, the LED, and back buttons. No screws or other hardware required . Printed in Polymaker Panchroma Purple.
To be used with factory rubber inserts, the insert for the 12 oz can will work just fine with the 8.4 oz can. If you like the better fit and are exclusive to the 8.4 can print the one for 8.4.
Allows the lid of the center console be useful space.
I had a Shaffner FN284-10-06 filtered inlet in stock, so I decided to use this for my Voron 2.4R2 build. Hence, I made this part.
This is a switch plate for the cubby area of late 3rd Gen 4Runner center consoles('98-00 I believe). This print is for any late 3rd Gen 4Runner center console, whether you just want more switches available or you swapped to the new…
Need a BIG cup holder for your Thermo/Hydroflask or similar bottle? The factory cup holders just aren't cutting it? Well, here you go. Attaches to the MOLLE panel on the passenger side of the center console. Tested on my 4th generation…
This is a Center Console insert for a 5th Gen 4Runner. I have it in a 2022 but should fit other years. Added Sasquatch for the kids. Only use PETG or ABS. Follow directions for your favorite filament.
This is the case and the mount for MKS Pi-TS35 TFT Screen on Voron 2.4R2
This will fit in the switch blank locations on many early Toyota models including the 1st Gen Tacoma, 3rd Gen 4Runner, and Toyota Pickups (plus others). Fits one standard size Bic lighter.
There are various panel latches and magnetic clips that offer quick panel removal for swapping between enclosed- and open-chamber printing, but I wanted to fix a few of the pain points that I ran into with some of the existing mods. Does…
Description Description The Precise Support for Seiko NH3*, NH7* or 4R3* movements offers exceptional precision in dial placement whether the crown is at 3, 3.8 or 4.1 o'clock. Printing Instructions: Recommended Settings: Use a layer…
Provides a place to store the rear headrest when the rear seat is folded down. Can also double as a light duty handle for help getting into the vehicle. Printed in matte black PLA. Not sure how well it will hold up to summer vehicle heat,…
My version of Voron Tap for old R1 version
My latest nerf sniper rifle. Unbelievably accurate. Easy build. Hardware can be found on my shop: https://moosemodshop.com/products/b34r-double-stack-bolt-action-rifle-beta-5-hardware-250-fps Assembly Guide: Google Drive Link - more…
Schlagring für die Ringhalterchallenge, da ich mir dachte 4 Ringe könnten gut als 4 Ringhalter dienen. Am besten liegend drucken für den Support der Spitzen. (Abgerundet, damit keine Verletzungsgefahr entsteht) Nutzbar mit und ohne Boden.…
This is version 1 of a cup holder that I did for my 4Runner. I didn't care for others that I had found and printed. It was designed to hold Yeti coffee mugs 20-30 ounces and 32-44 ounce Styrofoam cups. The cups are spaced far enough apart…
This is my Modified Middle Skirt Changes Optic to the other Skirts These white objects are supports that can be broken away after printing https://github.com/EraserFX/Voron-2.4r2-Trident-Middle-Fan-Skirt for mesh check this video
These are highly modified skirts from the original Voron2.4r2 CAD drawings to incorporate honeycomb mesh behind the original hexagon skirt design. This mesh is created by utilizing the Slicer's capability to specify a part of an object to…
Don't tighten too hard or you will compress the ptfe tube. Use a small brim on the coupler to keep it from coming loose.
Toyota 4Runner 5th Gen vent solution. Off road your 5th Gen 4Runner without a stock bumper? Finding the interior dusty after a day on the trails? The vent solution is for you. Print a diver and passenger side cover. Glue them to the stock…
These are highly modified skirts from the original Voron2.4r2 CAD drawings to incorporate honeycomb mesh behind the original hexagon skirt design. This mesh is created by utilizing the Slicer's capability to specify a part of an object to…
Can be used as a badge on a 4Runner, also included a file with the letters separated. I printed it in PETG as 4x1x.12in.
just housing for CYD ESP32 2.4 esp32-2432s024c with clicking mechanism
Part may be compatible with other Toyota models with Instrument Panel Cup Holder Toyota Part Number for the cup-holder assembly: 5562035050 CupholderArm_L: Refers to the arm on the Left as viewed by the driver (as shown in cover photo).…
I printed with supports for ‘build plate only’ to support the tabs on the top of the model. I would also suggest printing in PETG, PLA will work, but if you live in a warmer climate (like the Southern or South Western United States) the…
Flood lighting is via 24V LED strips mounted on 4 top extrusions angled 45° downward. The LED strip is held in place by a series of 57mm guides that capture the strip. The guides are held in place by two flanges that lock into the top…
The main deflector design allows for use of at 1 ½" duct hose or the secondary deflector. The duct hose option can be used for a more precise redirection of the air, such as towards a rear facing car seat or a pet kennel. The mating piece…
Modified gantry parts to use carbonfiber x axis on voron 2.4 r2 and trident gantries, the square insert pieces require 3 5mm heat-set inserts. no supports print to voron print standerds.
Consol Bezel for the 1st Gen Toyota 4runner (and likely pickups). It is not an exact replica, but it fits well. Deletes the 12v cigarette lighter plug. Step included, please attribute any remixes or sales. (CC-BY). Bambu suggests laying…
Ducati Panigale V4R Wall Art, based on a picture. Print Settings Printer Brand: Creality Printer: CR-10S Rafts: No Supports: No Resolution: 0.2 Infill: 15 Filament: 3D Jake PLA Red Notes: Any material does the trick, but only in red,…
Back by popular demand! Originally produced in 2020, the “Clock Block” as some call it is a way to get rid of your 20+ year old clock on late model 3rd gen 4runners and replace it with a convenient place to put your phone. Unless the…
Here are the inner fenders i used on my xtra cab build. Mirror for the other side. printed at .2 in PETG. These stop right at the bottom of the grille. These work on both the standard and LWB TF2 chassis. Let me know how they work for…
Replacement fuel spring clip for a 3rd generation Toyota 4runner. This model is the plastic portion the fuel door. Initial print was in PLA, but warmer weather will warp PLA over time. Petg is preferable in this case.
This is the dashboard switch cover. The model is designed based on the original cover from my 2002 Toyota Tacoma. It should also fit Hilux/4Runners/T100 as well. I've pictured the printed version next to my original one. To withstand the…
Voron v2.4R2 Z Belt Cover with wire routing. A multi color remix of Akio's version.
This is a remix of Pappadakko's redesigned dashcam mount for the 5th-gen 4Runner to work with the U3000 rear camera. I printed it in ABS to help prevent warping from heat in the summer. I recommend installing the camera on the…
Variace na Atorch DL24 - úprava krabičky pro verzi CL24R 150W
Should print fine without any supports. I used PETG for mine.
I bought a 2-channel dashcam for my 4runner and I was left feeling that the methods for mounting the rear camera were wanton. as such, I created this attachment for the rear camera that places it very near the glass and exactly in the…
Voron 2.4 R1 XT60 Skirts Mount to passthrough juice for externally mounted hardware like an ERCF using an ERCF-Easy-Brd . May also work with the R2 and/or the Trident ( depends on the size of the Skirts Hexagonal Holes ). BOM: The two 3D…
Pretty simple mod. I wanted another keystone position than the original design's two. This became four just for symmetry, but the more I thought about it the more ideas I had. Ethernet, USB (or two), some panel mount molex micro-fits…
In order to get better cooling for a conversion, I centered the 2 fans more in the Voron skirt. Since i installed an octopus board, which I rotated 90 degrees, the stock fan skirt did not blow directly onto the motor drivers. This model…
Modeled this after an OEM Toyota badge for a 1987 Toyota 4Runner. I used threaded inserts with M5 bolts in the factory location to mount this to my grille.
I like this design a lot more than the stock ones but I have an R2 so I modified them to match the screw holes in the stock 2.4r2 z drive baseplates. I also modified the TPU inserts to fit the new dimensions and made them 2mm taller. The…
Updated version of the Voron 2.4 skirt. Holes in the skirt could be used for some skirt inserts (e.g. for filament sensor connector).
I liked the remix that MatrixRay made and I wanted to keep the aesthetic going so I remixed his with a slot to run my ribbon cable. Works great! if you want to print one for the right side just mirror it in your slicer.
Adapter for 5th gen 4runner 6 1/2 in speakers for back hatch. It fits into a 2011 4runner but I imagine it should fit any 5th gen as well as other speakers as long as they're the same size. Print in PETG or ABS or similar high temp…
Diseño El modelo 3D de un Toyota 4Runner 2008 capta fielmente los detalles distintivos del vehículo real. Uso Ideal para coleccionistas de vehículos en miniatura y exhibiciones de modelos de automóviles. Sugerencias de Impresión…
The clip that was included with my garage door opener did not fit well anywhere in my 4Runner. I combined a clip with a blank switch plug to create a custom mount that integrates well. I replaced the blank to the lower left of the…
Replacements for the thin rubber strips originally glued to the underside of the battery hold down bars on the 3rd Gen Toyota Hilux-Surf along with 4runners & Tacomas of similar vintage. May also fit earlier/similar models but you would…
This is a deeper model that I just made. It has a slanted floor to hold your glasses to the rear. You can put your glasses or coins in here to keep them in place. The side with more depth goes towards the shifter. I put a thin piece of…
Adapter um AA Batterien in einer 6V Blockbatterie Configuration zu nutzen (Laternenbatterie) Draht von Unten einführen und auf der oberseite in die vertiefungen biegen. Erste AA Batterie einführen, dann Druckfeder und dann die zweite…
Patreon - https://patreon.com/CosmicNimbusPrinting Cults3D - https://cults3d.com/en/users/CosmicNimbus Hi ! I made a mount for my TP Link mesh wifi units, to clear up space on various surfaces around my home. One is a Wall mount. It has…
Made for a Voron 2.4r2 build with power inlet socket with 1.5mm spacing. Mine is bought at FermioLabs Skirt is mounted on the left side at the back of the machine (when looking at it from the front)
I needed a quick place to put my Sun Glasses on the console, but the 5th does not have one. So I made this. Nothing fancy, but does the job. You can put your glasses or coins in here to keep them in place. The side with more depth goes…
Designed for PLA or PETG 40mm x 115mm x 4.5mm
3rd Gen 4runner rear ashtray blankout plate with mounting holes for a generic USB charger outlet. I included the Scad file so it can be adapted to mount whatever. Center hole is standard size for 12V power port. Affiliate link to USB…
I added an Add-a-Fuse tap for a dashcam but couldn't replace the fuse box cover. I also didn't want to cut up the OEM part, so I made a reasonable facsimile and Dremeled out a hole where my tap goes. Sure, you could extrude a hole, too.…
Toyota 4Runner 5th Gen, reduced to a small, clean object that keeps its main shape and character. Part of the Mini Cars collection — The model is simplified for a reliable print at a very small scale. Print tip: use a 0.2 mm nozzle for…
A 3D-printable shell for older Toyota key fobs, designed to fit tight around the original. All buttons are available as well as an opening for the broken plastic ring part. One part is just the fob, the other has little angels on the…
Voron 2.4r2 center rear skirt piece that has two hexagon holes with Parametric Umbilical Gland (PUG) passthrough ports.
Upon Special request I have adapted my Kumiko design skirts to fit the much loved V2.4r2. This is for the 250 - 300 and 350 sizes! Yes all three! These will add a touch of fine design to your skirts to really make them stand out from the…
Story About two years ago, I got really excited about those nixie tubes and clocks (thanks to Travelers series, HBO's Chernobyl and others). I was thinking about buying one off of Etsy, but then decided to build my own one. Unfortunately…
Couldn't find any decent fitting cup holder inserts for the 4th Gen 4Runners so I decided to scan and make my own. I'll probably be updating this when I get more time to tinker with the fit around the chamfered area though for now this…
Voron 2.4 Fan Skirts extended for Noctua's 60mm Fans modified to attach w/ the Anti-vibration mounts included in box. You'll need 5x M3 Threaded Inserts 4x M3x6mm screws. 2x Noctua 60mm Fan (With the included Anti-Vibration Mounts in the…
I designed this adaptor to my Petzl Vortex helmet so I can mount my LEDlenser H14R.2 to it. It can also be used as a base for designing mounting brackets for all kind of stuff. The parts are connected with M3x20mm sink head screws and…
This uses the usual KW10/KW11/D2F size switches. Re-made X carriage endstop mod for the v2.4r1 + cw2 mount on mgn9 because the one I found at https://www.printables.com/model/662739-voron-mgn9-endstop-carriage-cw2 does not have holes that…
Center console hinge limiters for 3rd generation 4Runners. Drivers side provided. Mirror the part in your slicer for the passenger side. Toyota part numbers: 58964-16010 5896416010 58965-16010 5896516010 Category: Automotive
Wanting to create something that was inspired by the Knomi side vent Stealth Burner i finally came up with this. having now gone through two complete re-works I'm happy that this should be something more to my style. Featuring air flow…
I refuse to pay like $45 per mag pouch (before tax and ship!) for NRL22 and didn't want the rounds in the mag to touch the bottom of the pouch. so I designed this. Print in TPU without supports. I printed mine with 15% infill and it works…
Toyota 4Runner 4x4 Wall Art Silhouette Model. Adjustable size. I accept model suggestions.
