418 models
Idea I needed a new lens cap for my lens and tried to challenge myself to desing a one piece one that has built in springs. This is the result of that. Printing The print is fairly self explanatory, just print it with the logo side down…
Print approx. €1.07–€1.31 excl. taxPreliminary estimate for PETGSource material: PET
Nikon lens cap 55mm
Print approx. €1.13–€1.38 excl. taxPreliminary estimate for PETGSource material: PET
This is a very easy 155mm clamp to hold down your workpiece on your CNC spoilboard. I use this with the T-track system from Incra, but compatible with many different clamping solutions.
Print approx. €8.45–€10.33 excl. taxPreliminary estimate for one variant
The original file didn't suit for my sockets, so I adjusted it. Now it's fitting like a charm. Big thanks to the creator if the original file for providing the files for editing.
Print approx. €1.80–€2.20 excl. taxPreliminary estimate for one variant
Cover for wheel hub cap 55mm with VW log for MMU.
Print approx. €0.72–€0.88 excl. taxPreliminary estimate for PETGSource material: PET
Remix of lens cover by balabas ( https://www.thingiverse.com/thing:782450 ) I did following main adjustments: enlarged to fit my lens size balabas's cover goes completely inside the edge of the lens and from my opinion there is risk of…
Print approx. €1.68–€2.05 excl. taxPreliminary estimate for PETGSource material: PET
Using this model as a template ( https://www.prusaprinters.org/prints/37626-12 ) I created a new, basic model, but with a solid form so that I could choose what kind of infill I wanted. The same effect as the original can be achieved with…
Print approx. €6.30–€7.70 excl. taxPreliminary estimate for one variant
I needed a slightly bigger inside diameter to house a larger bottle. In my case it was a 3DLac aerosol can with a 2-1/16" diameter. MKE Dan's models looked great so I remixed it to be a bit taller, and with a 55mm inside diameter. I…
Print approx. €3.50–€4.28 excl. taxPreliminary estimate for one variant
The standard holder from https://www.ebay.nl/itm/Universal-Mobile-Phone-Adapter-Holder-Mount-Telescope-Binocular-Spotting-Scope/222674716928 doesn't fit on a 55mm Swarovski eyepiece. Therefore I've designed a fitting part. In the picture…
Print approx. €1.39–€1.70 excl. taxPreliminary estimate for one variant
A small adapter to get a 55mm HomematicIP thermostat, or any other HomematicIP 55mm device, attached to IKEA Skadis. The fit is not as tight as with the original one, could probably add additional spacing to the clips, but it holds it in…
Print approx. €1.09–€1.33 excl. taxPreliminary estimate for PETGSource material: PET
I soon realized I could go with a thinner reel and store double as many spools in my organizer. A Simple Modular Cable Spool, suitable for low gauge wires to be wound on. The dimensions of the spool are 20mm inner diameter, 55mm outer…
Print approx. €0.53–€0.64 excl. taxPreliminary estimate for one variant
Smoler and stronger remix.
Print approx. €1.00–€1.22 excl. taxPreliminary estimate for PETGSource material: PET
A Simple Modular Cable Spool. The dimensions of the spool are 20mm inner diameter, 55mm outer diameter and 20mm width. I wanted to organize my cheap electronics wires and found this gridfinity model to store spools, but didn't have spools…
Print approx. €0.67–€0.81 excl. taxPreliminary estimate for one variant
I have tried few versions online and at the end I decided to make my own design which is big enough, has the spool that can rotate for small and big labels, designed so you can pull to you or down, space for clamp, cover that fits in the…
Print approx. €9.84–€12.03 excl. taxPreliminary estimate for PETGSource material: PET
This is a three piece part, so it's easier to print. In addition to the printed parts, you will need: 2x M3 12mm screws 2x M3 nuts I printed my brackets in Cura at 15% infill, with supports, and left the top and bottom layer off so I…
Print approx. €3.56–€4.35 excl. taxPreliminary estimate for one variant
End caps for the frame for Drive Nitro Rollator Walker, these caps fit right above the frame where the wheels are at. I printed mine in ABS
Print approx. €0.61–€0.75 excl. taxPreliminary estimate for one variant
Remix of Wera Gridfinity Screwdriver Rack 1x2 that includes larger holes (14.55mm max diameter) for other screwdriver models (specifically, in my case, a set of Teckman T3 - T5 torx drivers).
Print approx. €3.29–€4.02 excl. taxPreliminary estimate for one variant
90° elbow fitting for 110x55mm rectangular ventilation duct Vertical/horizontal orientation Male / Male Print recommandation : Recommended PETG Layer Height 0.28mm Infill 15% ---------------------------------------- Pièce d'angle 90° pour…
Print approx. €4.04–€4.94 excl. taxPreliminary estimate for PETGSource material: PET
For model makers (dioramas) see the exciting addition of accessories below This is the standard 155mm howitzer shell in use by the US army since around WWI. This model was inspired by @sbeecroft's models on Thingiverse; this is not a…
This is a deep easy to handle 55mm lens cap. It is 4 pieces outer shell, buttons with spring, and 2x jaws for each side The lens cap snaps together after printing. Please use PLA and 0.20mm quality settings. See notes for PETG below. To…
Zur Befestigung von Steckdosenleisten an der Wand, Werkbank oder am Tisch habe ich diesen Halter erstellt. Der Halter kann für Mehrfachsteckerleisten mit Schalter verwendet werden. Benötigt werden zwei Halter für eine Leiste. Die Halter…
Inspired by this design . I didn't like the latching mechanism and it was very hard to print due to some poorly designed internal overhangs, so I decided to redesign it. My design leans more into the spring force of the clip to hold the…
No Supports Needed print at .16mm layer height 10% infill 40mms print speed for best results tight tolerance's (expert print)\ No Selling added handle version (drink wont line up with handle without repositioning) -if you'd like to sell…
Hier ein Ersatzteil für verschiedene Bausätze. Kompatibel mit LEGO® Technic 7M / 7L 4211805/44294194/44294 - 55mm lang
Summary of Concept This is a 3D printable Bahtinov Mask to assist with manually focusing on the night sky. Bahtinov masks work by creating diffraction spikes from a point light source (like a star) spread out across different sections of…
Description This is a simple adaption of Tridense wall mounted headphone hanger to be used with an IKEA Skadis board. The hooks need support. The headset depicted in the image is the Logitech G Pro X, a moderately-sized gaming headset.…
I needed a very strong basket to hold various things like LIPO Battery and oil, spray bottle, etc.
A minimal tape dispenser/roller for Scotch tape (for rolls with an internal diameter of 25mm, external diameter up to 55mm). Uses a piace of blade cut from a cling-film (or other kitchenware) roll, cut to a length of 20mm. Can be used…
Golf tee 55.4mm / 2.18", no support needed Based on the dimensions in the images, changed the hole for the ball in such a way you dont need support. I printed mine vertical without brim aswell. If you like this model, please download and…
First of all, this is limited right now to one size range, as it was requested and not too difficult to resolve. I’m including the STEP file, but for the threads you’ll want to refer to this config file . Pitch of .75, which is most common.
I am going away for the next couple of years, so I wasn't able to make an assembly guide and a gameplay video like I normally do. In addition to the 3D printed parts, you'll need to buy the following: 1 - Some of this pipe to make the…
This print allows for an O11 Dynamic XL case to be lifted 55mm of the ground. It fits over the existing feet without modifications. The design of the feet allows for just printing the design four times without mirroring. Printed with 20%…
Herewith i want to show you one of my designs for a 3 Bladed RC boat propeller. Outer diameter: 55mm Bore diameter: 4mm Pitch: 50mm Height: 16,2mm & 19mm Type: DriveDog 3,7mm
Should fit most 55mm spindles with 57mm collars. MPCNC Primo version only. https://www.v1engineering.com/
Here I start dumping the 100+ STL of screw thread adapters that I've made for the Telecentric project Waiting for the famed OpenScad “universal adapter” Maybe I'll put them all here. Start with some M42: Camera mount thread M42x 1 adapter…
Hello All, This is an insert for my rugged box deburring tool case here: https://www.printables.com/model/551996-deburring-tool-case-150mm-afa-tooling-rugged-box-s I noticed there were a few folks who were cutting or modifying the insert…
Lens cap for lenses with a 55mm thread. Designed in Fusion 360. Design files included. Works really well on my camera. Prints in 3 parts. The clips slot into the body. Stretch the spring out a bit and take your time putting it together.…
NEW Version. Cosmetic cleanup and slightly better modelled. Conic fit for Ø 100mm duct. This is parts for ventilation fitting 110x55mm rectangle ventilation duct to 100mm Ø duct. Orientation for print will depend on printer and you may…
A small box for electronics projects with 6mm diameter wire holes on each end. The top and bottom friction fit together so no glue is required. Outside dimensions: 55mm x 35mm x 14mm Inside dimensions: 52.5mm x 32.5mm x 11mm
This is a replacement for the standart 55mm version. V2 with stronger Clips that should not break. If you need help, have questions or want to collaborate, please feel free to join my discord server: https://discord.vr6syncro.de If you…
Come support these models over on Patreon Buy my time, Not my models. Easy to print M1918 155mm howitzer, 1/100 scale, will want some greebling if scaled up. Some details have been changed for looks/ printability. For a towed version, cut…
Holder for paper used in espresso making. Comes in two sizes one for 55mm paper and another for 58mm paper and two heights. Update 8/18/2023: added holder for 58mm paper and taller options
Not much to it. It clamps onto your desk or table up to 55mm thick. Remix of the original by JohnMartin
This is parts for 110x55mm rectangle ventilation tubes. Orientation for print will depend on printer and you may have to experiment with support. Here is an example of a duct angled 45 degrees for better print result for overhangs. See…
Printed it at 0.2 and 60% infill. Took me 1h21 on Ender 2 V2. I used eSun matte pink filament. It nearly matches the pink of the mic.
I wanted a koozie that could fit the slim 355ml cans, but that would then allow them to fit into coolers for thicker cans. I couldn't find anything that quite worked when searching, so I created a new one that fit in testing perfectly…
A simple filter to adapt 49mm lens filter to 55mm lenses. Threads are 49x0.75 and 55x0.75. Avoid tightening the filters too much, it might be difficult to remove after (remove the 49mm filter first or use the handle version). Print at…
Přechodový kroužek pro montáž 55mm fotografického filtru na objektivy se závitem 52mm. Tisk doporučuji z pla, z důvodu jeho tvrdosti a kluzkosti. Výška vrstvy 0,1mm. Menším závitem dolů a se zapnutými podpěrami. Transition ring for…
Front lens cover for the 1977 Minolta MD Rokkor 50mm 1:1.7 with a filter diameter of 55mm. When you're thrifting vintage lenses, it's not uncommon to find lenses for sale without a front cover, a back cover, or both. I recently found…
Two lens cap holders I printed using the remixed parametric design. The lens caps are for my Sony 20mm f1.8 G lens, Tamron 28-200, and Sony 55mm f1.8 Zeiss. The second (triple) lens cap is for a friend who has a Sony GM 24-70 GM I, Sony…
Nested and keyed Beverage Can Dispenser for standard USA SLIM cans (12 oz. / 355 ml). I split it into two halves so it can be printed on a standard Prusa printer (MK3/MK4). The two halves are keyed together and glue is NOT required for it…
0,1mm thinner pins on the jaw for a better fit
I designed this Sample Card in a Business Card Size. The Fusion360 model is customizable.
Still trying which Material and setting is best. First ones made of PLA work pretty good since around 2 month but looked a bit rough on the surface as you can see on the picture of the first prototype.
Přechodový kroužek pro montáž 55mm fotografického filtru na objektivy se závitem 49mm. Tisk doporučuji z pla, z důvodu jeho tvrdosti a kluzkosti. Výška vrstvy 0,1mm. Menším závitem dolů a se zapnutými podpěrami. Transition ring for…
NEW Version. Cosmetic cleanup and sligthly better modelled. This is parts for ventilation fitting 110x55mm rectangle ventilation ducts to 100mm Ø ducts. Orientation for print will depend on printer and you may have to experiment with…
Spool adapter, that fits about 75mm/71mm spools down to 55mm inside diameter. This is a solid model but you can print with 10% infill for great strength and reducing unnecessary fill. I printed with no top or bottom skin and adaptive fill…
Stop by the tavern before your adventure and enjoy a drink from this 12 oz can cooler. This mug is designed to be efficient to print with multicolor. The bands are horizontal and work well with flushing to infill providing almost zero…
Ring for 55mm cardboard spool (cardboard thickness up to 4.1mm) - fit for creality Hyper PLA, Polymaker PolyTerra and many more inner diameter of the spool ring 51.7mm so most of silica gel spool container still fit (like…
This is parts for 110x55mm rectangle ventilation tubes. See also other 110x55 parts https://www.printables.com/model/840511-rectangle-ventilation-110x55mm-angle-90-degree-upr And a 90 degree horizontal to verticla twist module…
This model has a long history, beginning as a simple clip for USB drives. After some iterations, I redesigned it to follow the design rules of crane hooks. A crane hook is designed as a cross-section with the same tension according to the…
If you want to see my best projects, I invite you here: https://cults3d.com/en/users/Guliwer06/3d-models Diameter = 55mm Print Settings Printer Brand: Creality Printer: Ender-3 S1 Rafts: No Supports: Yes Infill: 15% Filament: Colorfil PLA…
Ikea Skadis Cotton Pads Holder (up to 55mm)
I made this adaptors for slides and negatives for my Sigma Macro lens that has a filter thread of 55mm needs uniform light (I simply point to a white wall well illuminated and far enough to be out of focus) printed on PLA at 0.2 Created…
Extension of the milling machine for cutting foils There are 3 versions available One suitable for the 3018 CNC series and one for use of 500W spindle motors with a diameter of 55mm. Now a long version is also available when the Z-axis is…
95A TPU settings, 235C Noz. 60C Bed, 15mms print speed, no retraction, no support, 50% fan or more. built plate adhesion is 7 lines of brim everywhere. Play safe.
This is connected with me being the new owner of a Bambu Labs A1 combo. Specifically, this adapter will shrink the hole in the centre of your Anycubic filament spool so that it works with the Bambu Labs AMS system. Also it has a super…
Cable gland to the work table. Diameter 44mm/51mm/55mm/57mm/60mm/64mm/76mm Board thickness 25mm and 40mm
This is remixe of @addohm_141025 's Wall mounted build plate holder. I modified it for 355mm and 350mm build plates. There are two versions. V2 have more stability but needs some more filament. CAD at onshape…
Needed an adapter to be able to use Printalot filament up that I had. Just a basic, simple thing. Sharing under public domain, use it as you see fit.
I've been using the inexpensive but rather nice Genmitsu magnetic dust shoe on my DIY CNC router with a 500w 52mm spindle. I recently overhauled and built a new improved (is it new or improved, can't really be both) and due to the…
One piece wheel and tire for drifting. 1/18 scale to fit on Traxxas' LaTrax or similar models (like Tamiya M series ) . It prints fine with a 0.2mm layer height. Achieve best results by printing the wheel face up with black material. No…
Sun hood for Sony 55mm front filter size. Fits on SAL18552 and other similar lens with bayonet front mount.
This Lens cap is designed to be printed without supports at 0.15mm layerheight and has some tight tolerances so the locking mechanism most likely has to be broken loose wich is best done by carefully bending the parts in different…
Keep your lens cap safe and always at hand. This is a lightweight and durable holder designed specifically for the Nikon D3400 (or any lens with a 55mm cap ), allowing you to clip it directly onto your camera strap. No more stuffing the…
Design idea - not tested - maybe in future.
tolerances are tight, you may need to little file sony a mount or adjust z height for couple percent. for me it printed fine.
58mm (Female) to 55mm (Male) Step Up Ring for attaching a 58mm filter to a 55mm lens. Used Ratasich's model for the 55mm threads and ThespianMasks' model for the 58mm threads. Made 2 models: No grip (just round) Grip (for ease of…
There are companies out their ROBBING you of 20ml of beer. Bastards! Anyway, this little widget props up a 355ml can to fit properly in your Yeti Colster/stubby holder. It then cleverly flips over, and tucks up into the dome in the bottom…
Give your space a sleek, modern, and industrial vibe with this minimalist cube lamp! 🖤✨ Perfect for desks, nightstands, or shelves, this design adds a unique touch to any room. 🔹 Designed for an E27 socket (55mm diameter) – The hole for…
Electrical extension cord holder under desk under table 40-55mm wide use 3mm self-tapping screw wide of electrical cord extension 40-55mm wide of ziptie 10mm height 2mm Print settings 0,2mm layer 6 walls 30%infill normall snug support…
This is a set of 55mm compatible blindplates, switchplates and various mounts to integrate in your existing switchplates. The frontplates all clip into a springed backplate that is also printed (InsertSpring). The backplate itself is…
NEW Version. Cosmetic cleanup and slightly better modelled. Conic fit for Ø 100mm duct. This is parts for ventilation fitting 110x55mm rectangle ventilation ducts to 100mm Ø ducts. Orientation for print will depend on printer and you may…
6.5X55mm Swedish stacking loading block. Category: Tool Holders & Boxes
I loved having can lid for my 250mL redbull cans, but I had a few 355's recently and needed a version for those aswell. I present... that version!!! This fits 355mL redbull cans, but might also fit monster or other branded drink cans -…
I designed this cap with some specific intentions in mind, I wanted it to cover the entire lens face, filter ring and all, like a sheath, and I wanted it to be the "spring-loaded" pinch-on style. I had a couple lenses that I was…
I created a chamfered version of the hook for the HCW. I had issues printing the hook with a radius corner. This hook prints with no issues.
This is parts for 110x55mm rectangle ventilation ducts. Orientation for print will depend on printer and you may have to experiment with support. These models are 3-way links for rectangle ventilation duct 110x55mm If you need a mirrored…
HATCHBOX Revolver Spool Adapter for 3D Printer Accessories. Designed to enhance compatibility, the HATCHBOX Revolver Spool Adapter reduces the size of the hole on our new spools, making them suitable for accessories like the AMS LITE,…
This is kickstand mount for Nami Burn-E if you change suspension from 165 mm -> 150/155 mm. You need: 1) Woom 1+-3 kickstand for kids bike for 150mm, Woom 2-3 kickstand for 155mm 2) M5 inner threads 3) M5 screws
Print info: Material: ASA, ABS Layer: 0.1-0.2mm Perimeters: 3 Infill: ~30% Support: No
A tamp for compacting coffee in the ladle of a Espresso Maker/Machine, for 55mm diameter ladle.
Dose zum schrauben für Fotofilter mit 55 mm Durchmesser. Die Dose hat innen einen Durchmesser von 60 mm und eine freie Höhe von 12 mm. Eventuell innen mit Schaumgummi oder Velour auskleiden damit der Filter nicht klappert. Gedruckt mit…
A (print in place) hinge constructed with a 55mm barrel made of 9 knuckles on a 6mm diameter pivot. Bridges are 5mm max and tolerances are 0.4mm for all swept surfaces so should be fine on most printers. Includes a backing plate if the…
New version. Smaller cosmetic changes for a nicer look. and easier print. These models are parts for 110x55mm rectangle ventilation ducts. Orientation for print will depend on printer and you may have to experiment with support. See also…
I designed a cover that fits the 12 slot iDoo hydroponic system and holds the 55mm standard hydroponic mesh pots . I didnt want to use the ones from iDoo as they were too small and I wanted to easily move them to a standard hydroponic…
This is simply a rounded or domed center cap with the VW logo. Measure your existing center cap and scale accordingly, or add as a logo to your full center cap 3D design.
Filament spool adapter 55mm - 36mm (Formfutura > Sovol sv06). Only 3.6g.
