Counting matching models…
Here is my take on the tricorder featured on the later seasons of Star Trek: The Next Generation. It has the option of being a standard science tricorder and can be converted to a medical tricorder using magnets to swap parts. Update log…
2026.01.13 - Moved github links to codeberg. 2024.01.17 - Adafruit has a replacement for the main arduino board now. No code changes will be required, as the only change is to the accelerometer. The codeberg code doesn't use the…
This model is compatible with the lego system.
Fun and easy to assemble. Comes with a Quick guide for assembly.
I bought this DeWalt DCV580 at a thrift store with only the hose. I needed attachments and made these with a way to store the extras. Crevice Tool: Similar to the original and also clicks into the DeWalt handle for storage and will not…
Fits pretty much perfectly into the bestway flowclear pump model 58381. As far as I can work out, it is the Type I Version of the filter with model# 58093 which is 80mm in diameter and 90mm tall. Print two caps out of tpu and the inner…
A desktop stand for Lenovo laptops. Works with Thinkpad E580 and E480 so far, with a holder for the USB-C Thinkpad dock. Holds the laptop at a 30° angle, with the base of the screen roughly 15cm above the desk. Has small recesses…
Wanted to repurpose my old Galaxy Tab as a home automation display. Noticed that this tablet model has built in magnets on the backside, probably for a flip cover. Mapped the placing of the magnets and made a thin bezel wall mount that…
Printed in TPU/FLEX Tire 43.2 x 28 S Balloon Small : Part 6579 | BrickLink Wheel 43.2 x 28 Balloon Small with Axle Hole (+ Shape) : Part 6580a | BrickLink
Ripper for the Huina 1550 / 550 Excavator Needs (3x) M2x8 screws for the pads OR use it without pads for easier ripping in hard ground V2 corrects a clearance issue with my Spring Coupler ( https://www.thingiverse.com/thing:3732951 )…
This is an attachment that will reduces the noise coming from the exhaust port. Best to print port with small side down with brims to hold it down. I also printed with no supports. The reason for small side down is, if large side down…
1:1 Model of a 24Wh battery for ThinkPad T470/80 T570/80 and T25. It locks in place securely, the mechanism on the left latch works as intended. I made it because I mostly use my laptop on a charger/docking station but didn't want a…
I added a step of the whole thing, if you need to improve/modify it. You will need the following parts: Makita Terminal Adapter (Search for Makita Terminal Adapter on AliExpress) OR: https://www.printables.com/de/model/200596 80W 5A WiFi…
2.5" Drive HDD / SSD Laptop Drive Caddy Disk Tray Bracket for Lenovo ThinkPad. Compatible Models: For Thinkpad T470 T480 T570, For Thinkpad P50 P51 P51S, For Thinkpad P70 P71 P72, For Thinkpad E460(NOT E470)， For Thinkpad E480 E485 R480,…
Stubby attachment for for EGO LB5800 (580 CFM) Leaf Blower. Includes crush ribs on the interior for a more flexible fit and a twist lock mechanism. Useful for blowing off car, gutters, etc. Depending on your printer's settings and…
Compact little home for the XYS3580. Print instructions Requirements: 4x M4 8-12mm countersunk bolts (for attaching the bottom) 2x M3 4-6mm to attach the "tepih" (optinal) XYS3580 DC DC Buck Boost Converter 5.5 x 2.1mm DC Power Male…
Allis-Chalmers 7580 4WD - 1:16th Scale Uses M4 and M2 screws
To assemble the stand all you need is 1 x M3x20 screw and nut. You can find this great 7' Eachine monitor here: https://bit.ly/39uZf9U Other sizes and types of FPV monitors: https://bit.ly/3aqM2A9
Spring-loaded coupler compatible with the Huina 550 / 1550 or 580 V5 has more clearance added for the bucket, lock and bolts parts. Shouldn't need much filing/sanding. Also added a bevel to make hooking a bucket easier. If V4 worked fine…
This model is a remix of https://www.thingiverse.com/thing:2975884/remixes It has an improved ventilation holes on the back because the last model suffocated. I have also removed the banana connectors on the output and left only the…
Simple m.2 SSD drive holder for DELL Latitude 5580 M2 threaded inserts must be installed after the model is printed
Constantly repairing the eject linkage, especially with the 480/580 decks, I designed and 3D printed a replacement part engineered for a snug interference fit. The fit is tight enough that the ferrule will dent before the part slides, but…
Wall mount for the EGO 580 CFM Leaf Blower. This print attaches to the wall with 2 screws and fits into the keyhole slot. Recommendations: Mount directly to a stud or wood panel that is secured to stud. Strong drywall anchors may also be…
I printed this on my Ender 5 took ~8 minutes at 80mms. It is a tight fit in the keyboard but works great. Material: PLA Infill: 100%
Jedná se o model šroubu s okem dle DIN 580 a se závitem M10. Rozměry odpovídají skutečnému šroubu s okem. Výtisk na fotogrfiích je proveden při výšce vrstvy 0,2. Doporučuji ale jemnější tisk kvůli jemnosti závitu. Tiskárna: Longer LK5Pro…
This is a cover for the Realacc RX5808 Pro Plus module. Fits very snugly and covers completely around all the edges. Printed with nylon Taulman 910 alloy or PETG. Module snaps into the case/cover and then snaps into your goggles. I…
After printing, bend the inner part out slightly so that it can snap into place later. Printing in PETG 15% Infill 0.20mm Quality
Huina Excavator Electric Coupler * Use the 580_ labeled files for the 580 / 1580 v1 v2 v3 v4 UPDATE Someone made a printable lead screw version for use with "D-shaft" N20 motors. "Electric_LEAD_Lock.stl" "LEAD_Screw.stl" ! Thanks to m.…
This is the tray I designed to fit the SAB Goblin Kraken 580 R/C Helicopter Note, Fly hard at your own risk, I have flown these pretty hard and they haven't shown any signs of failure but obviously fly at your own risk, 100% infill…
Tried printing from both PLA and PETG, both options work perfectly.
This is an antenna mount for a pair FrSky TWIN antennas. It is designed to be mounted on the back of the elevator servo (low-profile, full-size, not mini) of a SAB Kraken 580. The sleeve portion of the dipole antenna snaps in place and…
Magnetic wall mount for Samsung Galaxy Tab A 10.1" Wi-Fi (SM-T580)
2 Position upright stand for Dell Latitude 5580 laptop. Laptop stand with 2 separate positions for the laptop to slot into. This is primary for raising the height of the laptop screen to a more ergonomic position. Most suitable for use…
This model is compatible with the lego system.
Dishwasher spare part 807035801 8070358018 Mounting Holder Bearing Headboard for Spray Arm For: AEG, ZANUSSI, ELECTROLUX, WHIRLPOO
A case for the XYS3580. It supports Anderson PowerPole connectors out of the box. Rear fan design to help with venting any heat. It has room for a 24v switching power supply. I've included a F3D and STEP file for those who want to make…
The SK35 or XYS3580 DC/DC converters are sold by Banggood. The wire-clip connector an be found at ebay: "MULTICOMP - MC02194 - CONNECTOR, LOUDSPEAKER, DUAL, PK2". The power plug is also ebay: "DC Power Chassis Jack/Plug Socket 5.5/2.5mm",…
Canopy for the famous betaFPV HX115 HD It is made to mount a pandaRC vt5804_AIR in it. I added a Lumenier Micro AXII Shorty to it as well :-) You need some support to print it. I made mine from TPU. Happy printing and flying ;-)
This a replacement insert that is used by the clamp on the lower section to hold the shop vac together. It seems DeWalt has two parts for this part number. One with wider pin and one with narrow pins. Both versions are included here.…
Accurate, jointed model of the Steelex D2580 solid rubber swivel caster wheel. Seems the original product isn't still on Amazon, but this one looks very similar save for the lack of black paint: https://www.amazon.com/dp/B07DGQ8WTY The…
Box for shelf above seating in Hymer MLT 580, release 9/2025 Biggest possible size for printer Prusa MK4S printer - length 248mm x depth 125mm x height 120mm
This model is compatible with the lego system.
I wanted to install a 2.5" 5tb HDD into this newer mini-pc, but the darn thing was too small. With the power of Fusion 360 I modeled an adapter to accommodate the extra girth. You will need longer M2.5 screws. I have texted M2.5x20mm…
Docela perfektně pasuje do průtokového čerpadla bestway, model 58381. Pokud mohu zjistit, je to verze filtru typu I s modelem # 58093, který má průměr 80 mm a výšku 90 mm. Vytiskněte dvě čepice z tpu a vnitřní a vnější rámečky z čehokoli,…
Headphone holder for a Jabra headset for my Lenovo L580 laptop. The holder is attached to the right-hand corner of the laptop. Printed with a Prusa Mini+. Support should be activated.
A small fixed 45 degree miter gauge for a Dremel 4 inch table saw. If you are lucky enough to find one of these chances are it didn't come with any accessories. Keep an eye out for future upgrades to my very dangerous (and useful!) Dremel…
This is a replacement latch for the Dewalt Cordless 20V Wet/Dry Vacuum (DCV580HR).
BOM Part Quantity 92x25 mm fan 2 cable adapter PH2.0 to 2x 4pin 1 M5 fan screw 10 M3x6 screw 4 M3 L4xD4,5 heat-set nut 4
A very minimalistic and small case for the XYS3580 buck-boost converter. It's meant to protect the electronics on the ba
20% infill should be good enough and no support material needed.
This mount is supposed to be attached using 3M tape to the boom. First position it with the protective film still on the tape to figure out where it is meant to go. I printed with BambuLabs Blue PLA that matches the blue of the Kraken…
Add a command strip on the back and stick it to your wall. You may need to sand the back a little for the command strip to stick.
Module case for several power supply modules (DPS5005 / XYS3580….) There a two version (with or without space for external power supply). Version1: Bottom_Part_placeholder.stl + Upper_Part.stl An old power supply (e.g. from and old…
Simple 92mm and 120mm fan mount for a unique ex-mining AMD RX 580 8GB 2048SP with a passive cooler and a single HDMI port. I could not find any info on this particular model but this card on AliExpress seems to be using the same cooler. I…
I recently got an Amscope ME580 ‘metallurgical’ microscope. I'm an electrical engineer/RFIC designer and my main use of [this] microscope is to take photos of and analyze integrated circuits… Unlike biological/metallurgical samples,…
Jedná se tedy o opakovaně použitelný filtr pro pumpu Bestway, typ II 2 nebo 58094, o průměru 106 mm a výšce 136 mm. Koncové části (víčko) by měly být nejlépe potištěny v PLU, zbytek v ABS nebo PETG. Mezi stěny pak jednoduše vsuňte látku,…
I recently bought Lenovo L580 which is (like all nowadays laptops excluding GETAC) powered by mechanically weak USB-something port that would break if you even look at it from wrong angle. Solution is easy and strong enough. Add a frame…
This is a remix of the original model by Quickset45 . I bought it, but it did not fit the cooling fans I bought on AliExpress. So I remodeled it that the 90mm fans could rotate freely in the case. I also changed the way the inner (white)…
Lenovo T580 USB-C support clip built using Fusion360 and printed in PETG on Ender 5Plus.
No supports. Between this and my 45 degree one this covers 99 percent of the cuts I make. Keep your fingers clear! Made with https://www.reprapwarehouse.com/ blue 1.75mm PLA Category: Machine Tools
This caddy is used to mount an M.2 SSD and the Lenovo SSD adapter board so it fits inside a Thinkpad P52s 2.5" hard drive recess. I bought a used Thinkpad and the previous owner had removed the SSD for security, but also removed the…
Use the .3mf as the .stl does not have the banana plug holes and vents. I remixed it just in the slicer, not knowing that it can't be exported with the negative parts applied. Printed in PLA with default 0.2mm layer setting on Bambulab A1
Parts slightly modified to suit the characteristics of 3D printing
This is replacement wheel guard plates for the powered gas mowers in the Pro line. These plates fail remarkable often, so a reinforced version is also provided, which is easier to print.
Schnellwechsler mit aufnahme für einen 2x2 Rundmagnet. Aufnahme für Kegelzahnrad Modul 0.3, 16 Zähne (16K3) von Sol-expert. Dazu einfach das angedeutete Loch mit einem geeigneten Bohrer (0,3 oder 0,4mm) inklusive dem Zahnrad und der 1mm…
The Node 202 is pretty old but still one of the best flat SFF cases out there, since i repurposed my old Sapphire Nitro+ Radeon RX 580 recently in this case, i needed a custom fan duct most models out there did not fit or were plain…
I created this replacement because the base is often unavailable and the kit is pretty expensive. Also with the notch it make installation really easy because you dont have any wire cutting. The slit is pretty small to keep the part…
Designed and Printed for my friend's boat. Hopefully it works out! **Update** Functional! Saved 85 Eur
I designed this to be able to throw this mini-pc into my luggage and take it with me wherever I go. The interior prints are made with a TPU as padding. The exterior is made from PETG or something with strong impact resistance. This will…
The Jowo #5 nib section fits the TWSBI 580 ALR body, but the grip section fitting is too narrow to accommodate it. This is a replacement for the entire grip. It seals nicely against the original cap insert. Tested with PLA and PET-G (I…
The Linkup PCIE 5.0 riser cable is not compatible with the original bracket that comes with the Sliger SM580/SM570. The mounting holes do not line up. I decided to design my own bracket that will fit the Linkup riser cable. The holes to…
This model is compatible with the lego system.
required some spare parts for the Tamiya Astute 58080... so I made a 3D Model. Got them professionally printed later but they also worked made with my Prusa Mini. There is one file close to the original geometry + one file with some…
Print in PETG with a new flange to reduce the entry of light Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: Doesn't Matter Supports: Yes Resolution: 0.2 Infill: 20 Filament: Amazon Basic PETG Transparent Blue Category: R/C…
The door spring on our dishwasher snapped which then broke the plastic roller. I was able to source a replacement spring, however unfortunately, the roller for a door spring has been discontinued with no replacement (part number:…
Designed to mount the EPSON ES-580W power supply (EU-model) within an IKEA Pax cabinet .
https://cults3d.com/en/3d-model/various/customizable-mixing-plate-renfert-rainbow-no-10580000-sovereignnations Prototyp for customizing your own Case, add your Name on top or imprint different desings on it....go Wild!!! Print Settings…
If you find my designs useful, please consider sending a tip The original jaws broke on my Meade LX200GPS's autostar holder long ago (Meade part no 07580), and were since lost. I found a half of one of the original jaws when clearing out…
Use double sided tape to stick the FLYWING H1 GPS Unit to the top of the bracket. Two cable ties are inserted into the two holes securing the bracket to the tail boom. As an alternative to the double sided tape screw holes are provided…
Remixed from LaForge V2 Fatshark Doors by musicsurf, to fit the Quanum hb5808 diversity. Make sure to check the pictures for printing orientation and support structure. The snapping hooks are modified, as the original design would not fit…
Make this bumper plug, for Iveco Bumper plug 5802242097
This is a box to store BBT580 De-soldering Iron Box. Some glue is required to install the cover lock. Support material is not required. An infill of 20% is recommended. This object's main web page is:…
Fan shroud for Gigabyte Aorus RX 580 for 2 80mm fans.
I designed this enclosure for a RX5808 Pro Diversity custom PCB, oled screen, LM2596 buck regulator, and LM2940 ldo. The enclosure includes a T-nut insert for mounting to tripods. More info on the RX5808 Pro Diversity project and code for…
Spare part for BIG Linde Forklift for Kids (Kinderstapler im Linde-Look) http://www.big.de/de/produkte/fahrzeuge/traktoren/linde-forklift-800056580/ Made this for a collegues son. Be careful when testing, it fits tight and is not easy to…
This is an improved bay door for the realacc Rx5808 pro plus sold at Banggood.com. It is inspired from the great work done by @DonBowlissimo. Some minor changes for the module to fit better and fit snugly in the RX bay. Also the cut out…
I picked up a Realacc RX5808 Pro Plus OSD Receiver and needed a cover for my Eachine Ev200D goggles so I designed one. I printed it at 0.15mm layer height with support. Infill does not matter. The receiver will be a real tight fit if you…
Housing for https://www.drone-fpv-racer.com/module-rx5808-pro-avec-firmware-pirx-20-4442.html or compatible fatshark modules. it's meant to be mounted on quanum google screen back.
Ersatz für den Batteriefachdeckel einer TV Fernbedienung von LG. LG AKB783655802 Gedruckt in PETG
TEST PRINTING PARTS RIGHT NOW stay tuned for adjustments within the next few days A Hard Case for Venom 1580 Softpack 4000mah 20c 3S Lipo Battery. This also increases the with to prevent sliding horizontally in the battery compartment.…
Hallo! Hier wird ein Case für den FPV Diversity Empfänger HB5808 von Quanum angeboten. Es besteht aus mehreren Teilen da auch der Empfänger aus zwei Funkmodulen die über ein Kabel verbunden sind besteht.…
glue squeezer PLA 0.4 nozzle default allocation need support Filled with 15% spiral
To complete the XL Curved Cowling Air Dam" by AKNick I created another Low Pressure lip for Extreme Flight Slick 580 105.5" for better engine cooling. Supports needed only for the back pressure lip with overhand over 60º angle. Can…
Simple. un cooler de 220v arriba del micro con el frente atornillado al disipador. Puede que necesites rehacer el agujero del disipador con una broca del 2 o del 3 para que pasen los tornillos M3x12 con su respectiva tuerca M3
We purchased a new (to us) home and were disappointed to find that our refrigerator's butter compartment was missing its door. After a year or so of the butter falling out when we'd open up the refrigerator, I tracked down the replacement…
The D-Shaft receiver on the original part broke, made this as a cost effective equivalent for replacement part listings. References: Home Depot https://www.appliancerepair.homedepot.com/HD418888-Frigidaire-131858004-Control-Knob.htm Home…
‘Integrated’ storage for your polarizers, filters, etc. Holds 8 pieces… Designed for ME580 scope, may fit others… Attaches to scope using existing threaded holes and a couple M3 x 8mm bolts. Printing: No supports required. Re-orient model…
This is a RX5808 Solderless Module Bay for RotorHazard BPill Board It is designed as a rig for testing RX5808 VRX modules, as used in RotorHazard and Delta5 race timers, as well as RX5808 diversity receivers. The rig holds little pogo…
