533 models
Printing parameters: Resolution: 0.2 mm Perimeters: 4 Infill: 15% Supports: no Brim: recommended Assembly: Add some corc, rubber or foam at the bottom of the block. When you clamp in sand paper, the blocks will be fixed. Review: Related…
Print resolution: 0,05 Supports: NO Rafts: NO Material: PLA
Designed this for my Creality Ender 2 pro. It can be printed on every printer. Update 12.12.2022: New version V2 with engraved L/R added. Check out the other ender2pro upgrades I have designed! Cover, Creality Ender 2 pro by eSeL |…
Cubo de calibración de 15x15x15mm
Gridfinity 5x1 bin to hold two pairs of common household scissors. Can be printed without supports.
This silicagel container holds 250g and is a perfect fit for the NATO ammobox size 7 (~48x24x37cm). Dimensions of the container are: 65 x 140 mm. It requires a somewhat precise printer for the threads (you should be able to reach a…
Box - outer max dimension 204x170x102mm - inner max dimension 196x146x100mm Video with disassembly: Used screws: no screws needed 3D printing settings Layer 0,1mm for no supports (0,2 with supports - use organic tree 25°) 4 walls infill…
Mechanic Parts Tray 145x170x15mm - Mechanic Stuff It is ideal for storing small parts or screws, for garage, maintenance, or DIY Overall dimensions: 145x170x15mm The model may be imported as a single assembly or grouped object. Before…
Intro: The motivation for this design was to build an eGPU with a $250 budget with used parts with a 10 liter maximum volume. At 165mm x 165mm x 330mm, it comes in at 8.98 liters. Full assembly guide here:…
designed to fit in a prusa bed, could modify it to also fit bambu P or X series for now i just printed a 3x3 test piece and it's perfect, i'll print it full soon.
An A4 paper tray with stackable tabs. No Supports. It's large, so you'll need a big printer bed!
I really like the overall design and the comfortable grip shape of the original. This is my slightly improved version of a sanding block based on PointNemo's design. I printed mine with eSun PLA matte mandarine which has a nice soft…
Custom shallow-depth bin for Multiboard (http://multiboard.io). Using this one to conveniently hold small tools like a Leatherman multitool. Could use some iterating but will work until there are official 0.5 depth bins in the system.…
Stabiles Scharnier in den Abmessungen 80x55x16(7) LBH Achse Inbusschraube M5x50 + Mutter PLA oder PETG 100% Infill
Are you tired of searching for a Monopoly tray insert that actually fits the standard Monopoly set with its original cardboard inlay? After trying many designs, I couldn’t find one that worked with the dimensions of my Monopoly set.…
Das ist eine Spurplatte die für BMW Modelle mit einem 5x120 Lochkreis und 72,6mm Mittelloch Zentrierung. Zentrierung ist mit Spiel auf 73mm geplant. Alle Spurplatten haben ein 3mm Konus, wegen dem Konus an der Radnabe. Zusätzlich: 1+2+3…
Ventilation Grille - Duct Cover - Griglia ventilazione a bocca di lupo Dimensional measures: 105x105mm 105x210mm 210x210mm 210x105mm Ø105mm Resize to adjust dimension All our designs are free to download and use. Your support fuels our…
vite m5x10 con dado m5 con standard iso, consiglio di stampare usando un pla+, senza inserire i supporti, e con un riempimento non inferiore al 40%
Compatibility with Lego Technik
This is a smaller 15x15mm test cube that can be used to monitor your overhangs and dimensional accuracy. It can also be used to test for retraction issues (under/over extrusion after retraction) and printing artefacts. Happy printing!
It has been designed for a 15mm axle and 110mm space. Designed for 21mm drop outs, so it should be compatible with all the BOOST forks. UPDATE : The V5 version is 5mm taller as requested on a comment from Thingiverse. IMPORTANT: in this…
Elegoo Centauri Carbon 2 poop chute built from Bas's poop chute for the Centauri Carbon 1. I've flipped the model and lowered the chute entrance to ensure clearance for the power switch. With the new model uploaded 6/14/26 I've flipped…
Das ist eine Spurplatte die für VAG Modelle mit einem 5x112 Lochkreis. gedruckt mit 100% infill die Spurplatte ist nicht im Straßenverkehr zugelassen!!! Nur zum Testen, welche Größe man an Spurplatten braucht, um danach zu wissen, welche…
Einfacher Dichtstopfen für eine 230 V Außenanschlussdose mit M25x1,5 Gewinde. Ersetzt die mitgelieferte Kabeldurchführung / Simple sealing plug for a 230V outdoor plug socket with M25x1.5 thread. Replaces the originally delivered cable…
Profile "U" for LED Light Bar Prusa i3 MK2 / MK3 lighting. Fitted perfectly, it enters with a slight resistance. To avoid the bending of the profile from the LED heat, I recommend printing the element with 70% filling. The LED strip must…
This remixed part will serve as a replacement for the stock GoPro mount in order to provide a location for mounting 15x15 mm HGLRC M100-MINI GPS module on a SpeedyBee Mario 5 frame.
There are 2 versions of the frame one for landscape and one for portrait. It is a 2 part print. Frame and stand. I printed with 2 perimeters, 4 top and bottom layers. frame was printed in standing position. Supports recommended but with…
M25x1.5 threaded blind stuffing to close unused M25-openings. Unused PG21-openings in housings are also possible to close with this blind-stuffing set, but it is necessary to widen the opening in some cases (see details below). [1] Thread…
Made an organizer for our bathroom cabinet (Ikea Enhet 130cm depth) Easy to print, and should fit most bathroom cabinets of other brands too. Wall Thicknes is 2mm. Wall Height is 40mm. + additional 2mm Floor Thickness (Total 42mm Height)…
This loosely fits the Klein Tools 32500 11-in-1 Screwdriver. There is no lip for making it stackable since the screwdriver sticks up above the body anyway. UPDATE: Based on feedback, I've added a finger hole. Both models are available.
Mount for DIN 35x15 Rail, It's offcenter by 5 mm to sit flush against the 2020 extrusions when using a 4mm corrugated plastic and 1mm VHB tape (two side sticky tape) I've added a tape spacer to position in the din rail to be able to stick…
Background: This design fits a 1x5 Gridfinity mount. This Model holds 3 of each common drill bit size, as well as a hex for each. Sizes in mm are: 1.5, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6, 6.5, 7, 8, 9, 10. There are also extra size 6 & 3.5…
NEW V4, NOW UNIVERSAL!! It has been designed for a 15mm axle and 110mm space. Used with a RockShox SID Select+ 2020 Torque cap compatible ( THIS IS IMPORTANT ). The skewer must be inserted to secure the bike. I have been using it for…
RC Airplane Tire / wheel 65x19mm for a 3mm shaft. Printed in TPU with no supports, outer wall 3, infill 10% and Cura infill pattern to concentric. Print Settings Printer Brand: Creality Printer: Ender 5 Rafts: No Supports: No Resolution:…
Vial racks for 4ml - 12ml vials. Each vial rack includes text on the side so that the users can avoid overheating the plastic racks. These should just fit on a 200mm wide bed. They hold 50 vials.
What Is This? There's a dire lack of FDM printable Kailh Choc keycaps that work on mininum spaced boards, such as the minimally spaced version of @kilipan 's excellent Zilpzalp . I wanted to fill this keycap void, and also design a keycap…
My friend asked for some organizers to store a variety of 9mm magazines in his gun safe. He wanted something compact that he could easily pull in and out of his safe. I came up with this model that accommodated the majority of his…
Einfacher und minimalistischer Bilderrahmen für 15cm x 10cm Fotos. Je nach Foto kann das Standbein horizontal oder vertikal festgeklebt werden. Druck ohne Supports mit 0,2-0,3mm Schichthöhe
This is an enclosure for guitar pedals. It comes with a blank panel you can put your own holes in, as well as a front panel I used on a Pepers' Pedals Overdrive. It is designed to fit boards made for the Hammond 1590BB size enclosure and…
Turning knob 35x15mm for an M5 screw inside and outside the nut Drehknopf 35x15mm für eine M5 Schraube innen und außen die Mutter
These plugs are designed to go inside a seasucker HUSKE mount and let you put your thru-axle bike on it. Highly recommend printing this as 100% infill as you want the part to be SOLID. Also recommend a brim and upside down. I designed it…
Print-in-Place Hinged Box – No Magnets, No Assembly! Upgrade your storage with this fully 3D-printable hinged box , designed for print-in-place convenience ! The integrated hinges work right off the print bed— no assembly, no supports,…
This is a perfect Box for your Prusa Spare Parts. Size of the Box Inner-Dimension: 165mm x 130mm x 70/170mm (2 versions available) You need folowing Screws to complete it: M3 x 30 = 4 pcs (for the Hinges) M3 x 35 = 2 pcs (for the Handle)
Gridfinity Socket Rail 5x1 Custom designed for my sockets and measurements 3/8" socket set - Metric - Kobalt 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm 3/8" socket set - SAE - Kobalt 3/4", 11/16", 5/8", 9/16", 1/2", 7/16", 3/8",…
Compatable with the real threadboards made by 3d print acadamy launched on kickstarter 0.2 layer height 3 walls 15% infill
Plug/cover for the threaded holes of the Mennekes 1419 wall mounted power socket or similar. Since it's scripted you can adjust the parameters to suit your needs or obscure application. Current configuration: Thread diameter: M25 Thread…
Warhammer Citadel Paint Stand Was asked by my brother to create a stand for his Warhammer paints. His Instagram Page - https://www.instagram.com/theforgotten3rd/ 40 Paints can be stored in each stand. Sixteen of which are instantly…
Accurate M5 screw according to DIN 912. With “special” edge cut at the start of the thread for easy fit and assemble. Can do any other! 😊
A very simple stand for 5 roll-on essential oil bottles. Fits the standard 10mL bottles. The example picture was printed for speed with 0.25mm layer heights. Print instructions Category: Organization Print Settings Printer Brand: Prusa…
This is a quick mount for 35x15 din rails to be mounted in a 2020 extrusion. This is used for mounting my MotherBoard SKR1.3 and Raspberry PI to the back of my Ender5 printer.
These two prints make up the 5-15 board from the native Hextraction source file, but break it into 2 components which are more manageable for printers with <300mm bed sizes. -final assembly will likely require glue to complete.
A 5x1 Gridfinity Box that fits an Alientek T80/T80P soldering iron and and up to four additional tips. (first model i made, any feedback is welcome)
This is a rebuilt version of wigglememore's Hadley 1.25" Focuser Options to attach to the telescope body using M5x12 screws. This remix is intended to be used with the Hadley Neumo telescope The model is already oriented to print without…
A pan and tilt for 15x15 camera. Tilt servo is 4.3g and pan servo can either be 4.3g or 9g. Servo arms to be glued into the arms. Camera can be mounted on either side of the servo, use MIR files for other side. Can be printed without…
I used this motor: https://www.amazon.com/dp/B0F21RW7MJ?ref=ppx_yo2ov_dt_b_fed_asin_title The screws to mount the fan axle and motor are M3 screws. I'd recommend get a M3 Screw set. I used a shitty Kingroon 3kps Pro, the print quality is…
I searched for the Nine Men's Morris board game to print, but couldn't find one. So I created myself one with Fusion360. Board size is 175x175mm, it can be printed on the Prusa Mini. There are two versions available (both use the same…
This is a small spacer you can put between the left and right side halves of the [Hexagon A4 Paper Tray - Modular Design](https://www.printables.com/model/57131-hexagon-a4-paper-tray-modular-design) to accommodate US Letter sized…
I used the GridfinityGenerator | Fusion 360 | Autodesk App Store that is made by Lev Mishin The basis of Gridfinity a created by Zack Freedman Gridfinity: Your Ultimate Modular Workshop is FREE! I want to make the Gridfinity System more…
It's a trash can… there are some trash cans here, but they're all circular. This one should be easily modifiable to my specific needs, perhaps even for use as a storage container. I added a superstructure for larger basket contents. The…
Distanzsscheibe zum testen, welche Dimension man bestellen muss. NICHT IM BEREIECH DER STVZO ZUGELASSEN! Nur zum testen welche Dimension an Spurplatte bestellt werden muss. Lochkreis 5x112 und mittenzentrierung 66,6mm. Passend für viele…
ReadMe.txt Festool MFT DIY Klemm Dog Anwendung: Dieser Klemm Dog kann durch anziehen der integrietren Schraubverbindung fest mit der Arbeitsplatte verbunden werden. Die Idee ist nicht neu. Beispiele finden sich hier viele. Das besondere…
This desiccant box is sized to fit inside a display cabinet so that it is not visible and hides inside in one of the corners. This is effectively a remake of my "Desiccant Container with Screw Cap" -…
I used the GridfinityGenerator | Fusion 360 | Autodesk App Store that is made by Lev Mishin The basis of Gridfinity a created by Zack Freedman Gridfinity: Your Ultimate Modular Workshop is FREE! I want to make the Gridfinity System more…
15x110mm thru axle mount, with clear holes for screws
Have to print slowly external perimeter and with 20% infill. If you need a different logo, feel free to contact me and I will create exactly what you need.
Other front axle mounts available here are perfectly fine, but i needed one with a bit more clearance for the Rockshox ZEB fork's rebound-adjuster-cap.. So i made this one. Print Settings: PLA+ or PETG 20-30% infill does print fine…
Small Figure for Board Games: e.g. Halma, ludo
Use the mold positive to make the silicone mold for 1.5"sqx6.5" rectangle, then use the mold holder as a reinforcement for the silicone mold. I use FS20 for the silicone and print the mold mother and holder out of PETg. Only need supports…
Motivation On cable channel corners, often cables are visible or open ends of the channel are visible. This cover gives a nice looking corner when the cable channel is visible. Print Printed with SUNLU PETG without supports Brim is…
Bring order and style to your vanity with this Makeup Organizer Stand 💋 Designed with a modern minimalist look , this modular holder keeps your brushes, lipsticks, and accessories perfectly arranged in one elegant space. ✨ Features: 💄…
CZ: Adaptér není vhodný pro použití ve vodovodním řádu, kde může být tlak až 6 bar, nicméně pro montáž za vodovodní baterii u sprchy, umyvadla či dřezu je možné ho použít (nízký tlak). Pro tisk doporučuji použít PETG (zdravotně nezávadný)…
This is the same as chttrs's variant with the top wall thinned to fit on a 15x15cm build plate. Be careful inserting the phone, or the sides are likely to shear off. This is a problem with the original model as well, so caveat emptor.
Napkin holder for Ikea Storatare napkins. It fits 15cm x 15cm napkins. You can store your napkins laying down. Just put them in place and they always lie , no matter how many you have left.
Printing recommendation: Perimeters 3min-6max Enable brim (5mm) Every bike mount needs to be printed at angle so It doesn't delaminate when force is applied. Adding support in slicer is not best solution so I added custom support for nice…
3mm, 5mm, 8mm, and 10mm Speaker Baffles for the CRude Engineering 15x11mm Sugar Cube Speakers Speaker for sale on https://crudeeng.com/products/256019636071 Use code PRINTABLES for 25% off your speaker order!
Kabelkanal Ecke Hochkant für Kabelkanal 15x15mm als Abschluss und als Verbinderprofil.
This is yet another mitre / miter box but with a unique difference! It is designed to hold and clamp 25mm x 11mm window fly screen frames to allow for easy accurate cutting of the required 45 degree angles. I designed it with two guided…
I used the GridfinityGenerator | Fusion 360 | Autodesk App Store that is made by Lev Mishin The basis of Gridfinity a created by Zack Freedman Gridfinity: Your Ultimate Modular Workshop is FREE! I want to make the Gridfinity System more…
the size 25x18 is the outside of the cable trunking (consequently, the inner space of each joint covers) if there's a lot of downloads, i might consider building the 2 missings parts "90 OUT" & “END”
With 2 Slots for 55x55x1mm foil packaged meds, or paper with Meds/Contact info. Reverse slots are Indented.
GEPRC Cinelog 30 v3 gps mount 15x15mm
STL assumes 0.2mm layer height and 0.4mm nozzle and a ≤0.41mm first layer extrusion width. Printing: Disable elephant foot compensation. Makes sure that first layer extrusion width is set to less than or equal to the extrusion width in…
here is my take for an auxiliary fan for my voron 0.2. i had trouble with printing PLA in the enclosure, because of insufficient cooling for the parts. the mini stealthburner couldn't provide enough partcooling for PLA. i designed the…
the button has a version with a deep hole shallower one callled “short", i glued the magnet with some cyanoacrilate bc i didn't want to be bothered by tolerances.
Zusammenfassung: Remix of https://www.thingiverse.com/thing:3055127 Instructions insideDim = 12.7mm outsideDim = 15mm protrusionLength = 15mm roundoffRadius = 1 fittingType = 5 Eckverbinder für Vierkantrohr.
Simple Din 35x15 side mounting for 2020 (V-Slot T-Slot) Wide Din 35x15 added too
Basic honeycomb air vent cover / insert for 55x110 ducts. I made it to replace ugly cover sold in the stores. Printed with PLA, 100% infill (though here the walls are just 1 mm thick, so no infill won't even be necessary). Please leave…
A photo frame inspired from https://www.thingiverse.com/thing:344307 It can accomodate a landscape photo sized 195x135 mm This design need supports (10% or slightly less), i printed it standing and only few supports were added on the top…
Cable chain model with start and end support. Cable chain can be printed without support in horisontal position (last picture). You can easy adapt size to your needs in Prusa Slicer If you need any modification - ask me :)
This is a tile storage box for these rifraf tiles , inspired by this design made to fit inside this specific organiser . It is 225mmx160 and is made to REPLACE the "TM - Tiles" box. /!\ Unfortunately there is no enough space to fit all…
Mit dem schlichten Bilderrahmen könnt ihr euch eure eingene Bildercollage erstellen, nahezu ohne Grenzen. Es brauch nur ab und an einen Nagen oder eine Schraube in der Wand. Die Ramen sind für 10x15cm Bilder und wiegen selber fast nix.…
Print-in-Place Bearing (15x35x11mm) Engineered with tight tolerances to minimize play, it serves as a robust alternative for non-critical mechanical assemblies. Technical Specifications Dimensions: 15mm x 35mm x 11mm (Width). Scalability:…
I used the GridfinityGenerator | Fusion 360 | Autodesk App Store that is made by Lev Mishin The basis of Gridfinity a created by Zack Freedman Gridfinity: Your Ultimate Modular Workshop is FREE! I want to make the Gridfinity System more…
![eGPU Thunderbolt chassis for EXP GDC TH3P4 + ATX PSU [165x165x330mm - 9 liters]](https://media.printables.com/media/prints/429812/images/3562411_ec2f4b23-3b18-464a-bc88-986318650ad4/screenshot-2023-03-21-182821.jpg)
