Counting matching models…
Intro: The motivation for this design was to build an eGPU with a $250 budget with used parts with a 10 liter maximum volume. At 165mm x 165mm x 330mm, it comes in at 8.98 liters. Full assembly guide here:…
Stabiles Scharnier in den Abmessungen 80x55x16(7) LBH Achse Inbusschraube M5x50 + Mutter PLA oder PETG 100% Infill
This is a tile storage box for these rifraf tiles , inspired by this design made to fit inside this specific organiser . It is 225mmx160 and is made to REPLACE the "TM - Tiles" box. /!\ Unfortunately there is no enough space to fit all…
Stabiles Scharnier mit Inbusschraube M5x50 als AchseStabiles PLA oder PETG 100% Infill
Same thing as original design but You can use 4x BHCS M5x16 instead of 4x SHCS M4x16. Also M5 T-nuts fit just fine into the wheels. All parts are adjusted to fit M5 main tensioning bolt.
Stabiles Scharnier mit den Abmessungen 121x65x16(7) aus Pla mit einer Achse aus M5x60 Inbusschraube PLA oder PETG 100% Infill
Stabiles Scharnier mit Inbusschraube B5x50 als AchseStabiles Scharnier mit Inbusschraube B5x50 als Achse PLA oder PETG 100% Infill
A very simple endstop riser that uses M5x16 BHCS bolts that you may already have from your 2.4 build. I use the 12mm version, but you may want to use a slightly longer one for some more clearance. Friendly reminder to check your Z endstop…
Stabiles Scharnier mit den Abmessungen 81,5x65x16(7) aus Pla mit einer Achse aus M5x60 Inbusschraube PLA oder PETG 100% Infill
Držák solárního panelu CNC165X165-6 s kloubem, uchycení na tyč 25mm
Something I have wished was produced but have never found anything like it. I needed a way to neatly connect 25x16mm self adhesive trunking to a single UK pattress so I could relocate a light switch in my workshop without having to chase…
J'ai besoin d'un embout pour utiliser une moulure 25x16 qui me restait. Réalisé sous FreeCad avec du PLA blanc.
I hade some difficulties mounting the lids of a cable channel in a tight place, the vertical cables fell out of the channel interfering with the lid while trying to lock it in place. Designed for 25x16mm (width x height) channel Clas…
Nikon camera models such as the D800 have a built in curtain to close the viewfinder. But not on the “cheaper” models. Normally this will not be any problem as long as you don't do long exposures like in astrophotography. If the dark pic…
Backstory When creating window frames for Seed pixels using 25x16 mini trunking (Available from many uk suppliers), the standard instructions are to take the commercially available top cover corner pieces and place underneath to make a…
Due to the tight tolerances you may need to change some parameters. I have marked the most important dimension in the last picture. I used the "dust_cap_17" printed on the Bambulab P1S. Stahlbus brake bleed screw:…
The Dell WD19 Mount from EllingEG has to steep mounts for a typical 2,5x16 Screw (wich are typical used for power outlets in Germany, but are too long here) so I design an adapter to use these most common screw.
Couple of quick little box designs for cable breakouts from 25mm x 16mm cable ducting. Uses some m3 x 8mm screws and some m3 inserts.
Rather than buying a product like the FilterLock furnace filter (which probably does a better job at sealing the opening) that can be bought on Amazon or most big box retail stores in North America, I made a filter cover for my furnace…
I bought this nano aqaurium for R100 (6$) here and I'm working on a budget shrimp tank, My Sponge Filter is a Boyu - SF 100, but it should work for any filter with a 15mm bubble shaft use 6mm airline tubing to seal and prevent bubbling…
Rather than buying a product like the FilterLock furnace filter (which probably does a better job at sealing the opening) that can be bought on Amazon or most big box retail stores in North America, I made a filter cover for my furnace…
Parametric model to create joining parts for 25x16mm cable conduit. Use the model at…
Фурнитура для кабель-каналов. Заглушка 25x16. Печать от стола.
Title Ventilated Storage Box for Pantry Shelves (185 × 160 × 240 mm) Description This is a sturdy, ventilated storage box designed for pantry and shelf organization. The perforated (hex) walls provide airflow and visibility, making it…
Cable Gland to my electrical distributor to protect my emergency power line cable.
I wanted to know for what the one of the cheapest 3D printer in Ebay is capable. As the small balls are impossible to make I end up make roller bearing. The planning size is LR605 (625ZZ). (For the scaling down to 623ZZ: X&Y - 62,5% and Z…
Inspired by RAYS Triforce Tight fit on axle, won't slip off. Same offset as the standard rim from LE*O. If you don't want to waste money on overpriced 42'5x16 tyres, I cut the 49'5x20 down to size, here's a tutorial:…
![eGPU Thunderbolt chassis for EXP GDC TH3P4 + ATX PSU [165x165x330mm - 9 liters]](https://media.printables.com/media/prints/429812/images/3562411_ec2f4b23-3b18-464a-bc88-986318650ad4/screenshot-2023-03-21-182821.jpg)
