Counting matching models…
This requires a multi-material printer. Please refer to the included gcode and PrusaSlicer 3mf project file for a reference for how to print the checkerboard pattern, which bodies to print with ferromagnetic filament, and where to pause…
This is just one box of a bigger system with more than 160 variants in size and partition. Find the whole overview here. Stackable: three thirds/two halves make one full height All dimensions shown in the linked overview above compatible…
Hope this model will be helpful. If you liked it please hit the [🧡 Like] button. While working on some projects I encountered with a scenario where I needed to make a simple circut for LEDs, which requires a resistor component along with…
Collection of screws (ISO 4017 / DIN 933) including : M5x 6, 8, 10, 12, 14, 16, 20, 22, 25, 30, 35, 40, 45, 50 For general purposes PETG, PLA works ok. For some demanding application I would choose tougher material. If the fit is too…
If you like what i do, please consider throwing a few breadcrumbs my way :) https://ko-fi.com/duckers
Collection of screws (ISO 4762 / DIN 912) including : M5x 6, 8, 10, 12, 16, 20, 25, 30, 35 For general purposes PETG, PLA works ok. For some demanding application I would choose tougher material. If the fit is too tight, I would recommend…
This is a simple organizer for testing keyboard switches. There are a few improvements that I made over the spartan version that my switch supplier provided. The "plate" area of the sockets is 1.5 mm thick, which is the correct size for…
This is my version of Tom Short's Dactyl Manuform 5x6 ergonomic keyboard (see: https://github.com/tshort/dactyl-keyboard ). Changes from the original: circular holes for USB and TRS panel-mounted sockets added reset button hole fixed thin…
Collection of screws (ISO 10642 / DIN 7991) including : M5x 6, 8, 10, 12, 16, 20, 22, 25, 30, 35, 40, 45, 50 For general purposes PETG, PLA works ok. For some demanding application I would choose tougher material. If the fit is too tight,…
up to date version of my projects are always on thingiverse, sometimes i forget to update the other platforms! https://www.thingiverse.com/thing:6222183 Update: -V2Base and V2Lid with more clearance around the alignment features and…
5X6 HC wall that fits perfectly in a 150x150 build plate, for maximum coverage.
All credit goes to Matthew for the model. I only changed the size to 6x5x6 with Matthew's Onshape model by changing the configurations.
3030 Aluminium profile M4 nut 15x6mm Designed for standard M4 hut with the following dimensions: 7x3.2mm 3030 Aluminium profile drop-in M4 nut T-nut available here: https://www.thingiverse.com/thing:3559740 Category: 3D Printer Parts
Use the Hart Stack System to bring your Gridfinity bins on the go! These toolbox organizers stack and lock together for easy portability, and they just so happened to fit the Gridfinity dimensions very well, parts don't even spill out…
If you have a Bambu Labs printer or use Makerworld \ Bambu Handy, see : https://makerworld.com/en/models/183673#profileId-202535 Harbor freight version was too small for the brand I have so I recreated for a 125x60mm box. Printed flat and…
This is based on Zack's Freedman's gridfinity project and it is a 5x2 tray, 6 units tall, with a cutout shaped to hold a FERM rotary tool or any similar dremel-like tool. In the unused space I added pits to hold chuck tips or other…
While I found some gridfinity drawers, none would be completely to my liking. My criteria were Sturdy to hold screws and nuts Stackable for easy extension Use as little filament as possible for faster prints and less costs The drawers do…
Use the mold positive to make the silicone mold for 1.5"sqx6.5" rectangle, then use the mold holder as a reinforcement for the silicone mold. I use FS20 for the silicone and print the mold mother and holder out of PETg. Only need supports…
Prototype remix of the Gridfinity Storage Box V1 by Pred, with an integrated, more robust hinge. The hinge leaves will also act as a base for standing the box vertically. I also removed the sweeps from around the circumference as I felt…
I needed a crimp tool holder that was 6U tall for the gridfinity storage box by Pred. I revised this to be 2x5x6 and to have a little looser fit.
I made a storage container for pliers that I need. The dimensions are: 4x5x6. STEP, STL, and FreeCAD files are included. The last picture shows the complete drawer. You can find some of the other Gridfinity inserts in my profile.
Gridfinity Forstner Bit Organizer 4x5x6 No support needed. Check out my other Gridfinity creations: https://www.printables.com/@NygaardDesign/collections/1741703
Electric motor fan protector 135x60
This ornament or photo hanger is for photos that are 65mm x 65mm. You can either glue or friction fit the photo in. I have only printed this in 0.2 mm layer height and using PLA. I will update with some photos after printing a few more…
drilled cylinder infill 20% buildplate adesion: yes PRINTING TIME:15 MINUTES
Diseñe este modelo, para colocar en forma vertical el router Huawei HG8145X6, con adaptacion de un ventilador de 80mm. para forzar aire y verdaderamente de sentirse caliente todo el tiempo. con esta solución va realmente frio.
This is a remix of http://www.thingiverse.com/thing:2154260 snug fit for 35x66mm boards. Mount the PCB with m3x4 screws. The outer screw mounts have been moved to the corners to leave the screw connectors easily accessible. Print Settings…
These hooks fit on ATX Cable machines with hole beams of 60.5x60.5mm size and holes 20mm in diameter spaced 50mm apart. Material: PETG Infill: 100% concentric Top and bottom layer: concentric 8 grams of filament per hook Print time: 10x…
I wanted a way to keep my batteries organized and protected in this lipo bag I got on Amazon. This will fit a total of 12 Betafpv 550mah BT 2.0 batteries or similar, with some space for the Betfpv tester/charger and some cables.…
Stabiles Scharnier mit den Abmessungen 81,5x65x16(7) aus Pla mit einer Achse aus M5x60 Inbusschraube PLA oder PETG 100% Infill
9 piece SAE Snapon Wrench holder for 7/8, 13/16, 3/4, 11/16, 5/8, 9/16, 1/2, 7/16, 3/8 10 piece Metric Husky Wrench Holder for 19, 17, 16, 15, 14, 13, 12, 11, 10, 8 Both or at least one will fit a large variety of sizes with the taper.…
This is just one box of a bigger system with more than 160 variants in size and partition. Find the whole overview here. Stackable: three thirds/two halves make one full height All dimensions shown in the linked overview above compatible…
5x1 through 5x6 base grids. The most important thing is to make sure your magnets have the same orientation throughout the whole system. More about the FreeGrid system and FreeCAD tools to build your own modules is available on our…
Picatinny-Lampenhalter D15X60 Gemacht für Lampen, Laserpointer oder ähnliches mit einem Durchmesser von 15mm Lässt sich mit 2 Stück M4 Schrauben und Muttern an Picatinny befestigen. Enthält einen verdeckten Tunnel für einen kleinen…
Tool tray for the Ferm Rotary Tool (Dremel like), with slots for 12 tools and charger. (Ferm CTM1018 Corless Li-ion combitool). Big shout-out to XVIIarcano for the original concept. I added outer wall pieces and extra slots for tools.…
Description This corner reinforcement bracket is designed to strengthen furniture, shelves, cabinets or wooden structures. The holes are designed for 4mm countersunk screws but you can easily scale the model in your slicer if needed. The…
I needed two of those in fischertechnik blue to complete a model.
Remixed to halfgridsize. Must have low Gridfinity inserts next to it for comfortable use. Originally I had half grid size left in my drawer and wanted to store my digital caliper there. After reorganisation I printed a second holder for…
Simple holder for 11-20mm HSS drill bits. Comes with a small lip so you can add your own labels. Stackable.
For fold-out beds from IKEA 40mm riser
Ran across these UK containers and thought it would be neat to convert one to a particular US lid. These unusually shaped Food City store, That's Smart labeled milk jug lids are larger than normal milk jugs and that makes for a little…
I use a 3x5 size stacking plate for gridinfity redefined and i created these pocket hole bin holder to replace the bin I had been refilling. it can be screwed to a stacking plate or kept separate. the label shelf is for ½" tall label for…
This design uses up to 20 6x2mm magnets, but you can use as few as you desire. They slip into place easily and can be removed with a pick. I made this compatible with a gridfinity “rugged” box for storage. When stacked with other bins, or…
Small basket for HSW. No supports required. You will need an M4 nut and an M4x12 screw.
TL;DR Use my stacking latch, offset or not, for no-interference stacking of 6U boxes. Using Gridfinity Generator at https://gridfinity.perplexinglabs.com/pr/gridfinity-rugged-box/0/0 , which I believe is based on bulbasaur0's work, I…
Open VSlot 2020 Corner Bracket - 62.5x62.5x20mm fiting M5 button head screws
It's a basic 1x2,5 block, It fits just fine into regular baseplates. It fits both 100mg and 50mg versions.
Placca per avvolgibile persiana 21.5x6 cm foro-foro 16.5cm
Bins for small components. I use it for transistors, capacitors, LEDs, etc..
I made a storage container for pliers that I need. The dimensions are: 1x5x6. STEP, STL, and FreeCAD files are included. The last picture shows the complete drawer. You can find some of the other Gridfinity inserts in my profile.
GPS holder for a GPS like the GOKU GM10 PRO V3 for the Chimera7 Pro V2 flight frame. Print in TPU, no supports need.
Mounting for a switch. Additionally needed are 4x 18mm M6 screws and 4x M6 flat nuts. The flat nuts need to be inserted during the print before printing layer no. 51. The included gcode and m3f.file is prepared accordingly (see picture).…
Ist eine Bessere Version von meiner älteren Bierkiste eben nur mit einer Einkerbung für eine Schriftplatte
Work in Progress… This design will be parametric in the future. If you need specific dimensions, let me know in the comments. I printed both with fuzzy skin (cura experimental setting).
A simple organizer for my hex driver set. Here's a link to the exact hex drivers shown in the images. https://www.aliexpress.com/item/1005007695098463.html?spm=a2g0o.order_list.order_list_main.226.46e818029wShGJ If they aren't available…
This is a remix of Raspberry Pi Z-Box fan mount that allows a 25x6.5mm fan that is used for Original Raspberry Pi Case to fit: ( picture from raspberrypi.com for illustration purpose) Use the same settings as the Z-Box to print. Note that…
i do 2 walls, 7% cubic infill
All the Nextruder nozzles for the XL in a handy tray.
Created a shelf design that fits my vitamins perfectly to place them inside the cabinet door of my kitchen. Two versions available; One with minimal designs and the other includes an extra bracket to provide more support. Printed in PLA…
Simple wall shelf that i made to hold my Orange mini amp. measures 3.5"x6". holes use #8 screws. Uses roughly 84g of filament.
@norbimakes3d created a redesign of the MK3S+ extruder assembly to more reliably detect filament with an MMU3. I Couldn't source the same threaded insert they designed the chimney base for, so I modified that part to use the threaded…
5x6 organizer with fixator ( 212x114x62 mm ). Capacity of a separate drawer 57mm x 37mm x 15mm. A latch has been added to each cell to securely hold the drawers in place. Each box can be labeled, printed and cut out of paper, the name of…
This is a simple 65x65 fan grill that I designed for a speaker project. It is perfect for inserting into a wooden panel.
Questa scatola porta minuterie, ispirata al rinomato marchio Parkside, è stata realizzata con cura mediante stampa 3D, garantendo un design robusto e funzionale. Ideale per organizzare viti, bulloni, chiodi e piccoli attrezzi, la scatola…
for fixed perfect fit of OLED to make any face and modification. Use as per requirment
Capa protetora 55x60mm interno, com duas fixações em diagonal. Ideal para placas eletrônicas.
Customized version of http://www.thingiverse.com/thing:1201466 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=1201466 Instructions Using the following options: boxZ = 10 boxY = 65 boxX = 65 wallThick =…
Customized version of https://www.thingiverse.com/thing:261120 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=261120 Instructions Using the following options: tensionLength = 25 tensionThick = 6…
Printed with 100% infill in PETG. Can scale as needed - I've done 6mm and 3mm thick.
Gridfinity Bin for a Novus J-09 XX stapler (3x5x6U). Print with your favourite settings, no supports needed.
Plastic tray on wall for worktable. Size 50x75x60
i wanted drawers for my many 5x6 boxes so i could grab what i wanted easier. they were designed for the slides to be mounted on 20/20 extrusion but it should work fine mounted to plywood print 2 drawer slides mirroring one of them,…
Eyepiece Eyeshields or Eye-guards 35x6.5 mm mounting dimension for WF20x/10 high-eye point Eyepieces create to avoid contact and provide sufficient from top lens to eye. Print few times, optimal height (between top lens of eyepieces and…
I went to gridfinitygenerator.com and created a 2x5x12 and a 3x5x6 bin, then I used Blender in order to merge both bins to a single 5x5 bin with 2 rows being 12 units tall and the other 3 rows being 6 units tall, because I wanted to make…
sag meter for checking your sag fast before a trail
Plastic tray on wall for worktable. Size 100x75x60
this is a work in progress, this will be an expensive project that will take time to finish but I will update with pictures as I complete them. I have one complete drawer made at this time to verify fitment. i plan on making a 60 drawer…
YAB - Yet Another BCAR ! Hi FPS, 3x6 and 5x6 versions at 8 degrees, 7 crush, with Silly Collet and Cover - slips on and self centers. The cover has tines on the inside that rest between the BCAR and the locking collet. Modified my…
Motivation For a sandblasting project I used an old air compressor. The compressor has two wheels and two steel feet measuring 45x6mm. When operating the compressor, the vibrations cause some movement of the compressor feet on the ground.…
Just an extension of the original, AWESOME, model of Gridfinity stackable drawers 5x5x6. The only thing changed, was taking the drawer from being a grid to solid fill. This works better for what I needed to place in the drawers.
Batten Tensioner For 15*6 Fiberfoam Sail Battens. Needs a M4 threaded heat-set insert an a 30 mm M4 Screw with hex head. Overall length 120 mm, overall width 45 mm Best Print in ASA or ABS for water and weather resistance. Glue parts…
📖 Sobre o Projeto / Descrição Detalhada Quem utiliza a Sculpfun S30 Ultra (com sua ampla área de trabalho) junto a uma colmeia de corte de 645x645 mm sabe o transtorno que é manter a mesa colmeia perfeitamente alinhada e travada na…
I created empty spacers for gridfinity. It is just the outer frame, no inner grid so you can properly stack all kinds of gridfinity modules. It can also be used to hide something under a gridfinity box :) It supports the following frames:…
Bins for small components. I use it for transistors, capacitors, LEDs, etc..
Motivation For a sandblasting project I used an old air compressor. The compressor has two wheels and two steel feet measuring 45x6mm. When operating the compressor, the vibrations cause some movement of the compressor feet on the ground.…
A large gridfinity pantry box measuring 5x6 gridfinity grids . Internal dimensions are 201.4mm x 243.49mm
Just an extension of the original, AWESOME, model of Gridfinity stackable drawers 5x5x6. The only thing changed, was taking the drawer from being a grid to solid fill. This works better for what I needed to place in the drawers.
I went to gridfinitygenerator.com and created a 2x5x12 and a 3x5x6 bin, then I used Blender in order to merge both bins to a single 5x5 bin with 2 rows being 12 units tall and the other 3 rows being 6 units tall, because I wanted to make…
TL;DR Use my stacking latch, offset or not, for no-interference stacking of 6U boxes. Using Gridfinity Generator at https://gridfinity.perplexinglabs.com/pr/gridfinity-rugged-box/0/0 , which I believe is based on bulbasaur0's work, I…
Description This corner reinforcement bracket is designed to strengthen furniture, shelves, cabinets or wooden structures. The holes are designed for 4mm countersunk screws but you can easily scale the model in your slicer if needed. The…
Tool tray for the Ferm Rotary Tool (Dremel like), with slots for 12 tools and charger. (Ferm CTM1018 Corless Li-ion combitool). Big shout-out to XVIIarcano for the original concept. I added outer wall pieces and extra slots for tools.…
up to date version of my projects are always on thingiverse, sometimes i forget to update the other platforms! https://www.thingiverse.com/thing:6222183 Update: -V2Base and V2Lid with more clearance around the alignment features and…
Work in Progress… This design will be parametric in the future. If you need specific dimensions, let me know in the comments. I printed both with fuzzy skin (cura experimental setting).
Collection of screws (ISO 10642 / DIN 7991) including : M5x 6, 8, 10, 12, 16, 20, 22, 25, 30, 35, 40, 45, 50 For general purposes PETG, PLA works ok. For some demanding application I would choose tougher material. If the fit is too tight,…
A large gridfinity pantry box measuring 5x6 gridfinity grids . Internal dimensions are 201.4mm x 243.49mm
