49 models
⚫ Zetor 6341 ⚫ This is the last model for the year 2023. Expect a new models in 2024 Follow me on YouTube for more info about what you can look forward for. :-) Zetor 6341 is the last tractor I will make in foreseeable future. At least…
This is a remix of a great project. Source: https://makerworld.com/en/models/1844353-the-mochi-housing-and-inner-frame-dasai-mochi#profileId-1970817 I added a 16340 Li-ion battery and a TP4056 USB-C charger. You'll also need an SS12D00…
This model is compatible with the lego system.
BEFORE STARTING THE IMPLEMENTATION OF THE PROJECT, READ CAREFULLY THE ENTIRE DESCRIPTION !!! Hello Everyone I have designed battery holders for CR123A / RCR123A / 16340 batteries using ready-made contact plates, which can be purchased…
A caixa para baterias 16340 é um acessório útil para quem usa baterias desse tipo regularmente, seja para fins pessoais ou profissionais. Com ela, é possível manter as baterias organizadas e seguras durante o transporte e armazenamento,…
Ověřený tisk PET-G, vrstva 0,2 mm s 2 perimetry. Doporučuji postavit na podložku přední částí - otvorem pro střelu z hlavně. Podpěry nutné. Použil jsem organické.
Case for CR123A or equivalent 16340 rechargeable batteries. Internal dimensions: 34 mm (+0.6 mm for battery pin) x 17.2 mm (diameter). Please note that some 16340 rechargeable batteries may not fit, particularly those with a USB-C port.…
This model is compatible with the lego system.
This model is compatible with the lego system.
This is a dual 16340 size battery holder. It uses slide in battery clips. Print instructions Category: Hobby Instructions Using the following options: Battery_Size = 1 Mount_Hole_X_Spacing = 40 Cell_Count = 2
This model is compatible with the lego system.
You can buy these from me here! Consider supporting us on Patreon! These 16340 battery holders with a screw lid are incredibly tough and rigid! Designed for use with unprotected button top and flat top cells. Print the bodies out of PETG…
I made a version that can be disassembled and is not glued together. You need to insert the nut to the small part opposite propeller as first thing. Enjoy :) Print settings: - printer: Prusa MK3S - layer height: 0.2mm - nozzle diameter:…
Print-in-Place Hinged Box for 4x CR123A Batteries Compact, one-handed operation storage box for 4 CR123A batteries (or CR123 or RCR123A or 16340) with an integrated hinge. Optimized for one handed use. Materials needed: 2 x magnets (size…
Print with no support
16340 Li ion Battery Holder for use in place of 3 AAA batteries. I have a couple of outdoor lights that use AAA batteries but the AAA don't last long so I created an adapter to replace the AAAs with a 16340 Li-ion battery. I used an…
Piece with the same measurements as IKEA 10046342 to be used on the back of ENHET furniture
BEFORE STARTING THE IMPLEMENTATION OF THE PROJECT, READ CAREFULLY THE ENTIRE DESCRIPTION AND VIEW THE PHOTO GALLERY !!! Hello Everyone I love the LYWSD03MMC temperature and humidity sensors from Xiaomi because they have a compact size, a…
KM-6340 Camshaft Locking Tool for Opel / Vauxhall / Chevrolet (Z16XER, Z18XER) Camshaft locking tool for Opel/Vauxhall Astra H 1.6 - 1.8 . This tool is also compatible with some other Opel/Vauxhall models and brands (Chevrolet, Fiat…
I need to store my ibuprofenium near me, and since I am caring an Olight Perun 2 mini with me that uses 16340 batteries i designed this to fit besides a spare battery in the holster i designed.
In order to print this thing super quickly, I wanted to use the 0.8 mm nozzle on my Flashforge Adventurer 5M, so I had to “beef up” the thickness of the sidewalls where the slots are for the attachment tabs. I also slightly tweaked the…
We have broken most of our Vex robotics crank handles, likely because of the torque the students frequently apply to them. This handle has a loose rotator that allows for high-speed cranking, and it's a slightly larger piece. It was…
(no rubber band) FULLY PRINTABLE OTF Fidget toy
I created a small and basis Arduino case which also holds a 16340 battery and has some room left for sensors. Print Settings Printer: Fabrikator 2 Mini Rafts: No Supports: No Resolution: 0.2 Category: Electronics
EN Hood Latch Cover 8J8863471A Audi TT 8J 2006 - 2014 IT Cover - Sportellino serratura cofano posteriore, parte del codice 8J8863471A Audi TT 8J 2006 - 2014
Replacement clips to attach the rotor to the helicopter. An 8mm hole must be drilled through the roof of the helicopter where the old clips have been. The clip is pushed through from below and the rotor is then clipped on it. eSUN PLA+…
Replacement for the Playmobil cannon's wheels/axis. The axis is appr. 41 mm long (incl. hub) with a wheel diameter of appr. 14 mm. Original part numbers are 30030600 and 30063460 - depending on the color. In the original design, there is…
This thing is for carrying four photo cells (ICR 123 or LC 16340). I use it to store the cells for my old FENIX P20 flashlight. You will also need: M3 x 20 mm screw M3 hexnut 4x neodymium magnet (h: 3 mm , d: 6 mm) some glue to fix the…
EN: To identify the control that activates a special light (usually yellow in colour) located in the rear of the vehicle to aid with vehicle identification in foggy conditions. To indicate the operational status of the rear fog light. DE:…
Getriebeschutz Laderaupe LR634 von Carson Veroma Modellbau um das Winkelgetriebe vor Schmutz zu schützen.
The original Carson Magnifier Head Light runs on 3xAAA batteries that take too long to charge, so I made this mod that houses a single 16340 / RCR123A Li-Ion battery instead. Rechargeable li-ion batteries have more capacity and take just…
Adaptateur batterie 16340 idéal pour les diy maison
4x Hirschmann SEB 2600 G M4 or any other connector with a 12mm installation diameter 2x m4 12mm m4 (fits into the screw holes for the rackmounts) I printed it without support
Press tool TREK bike ABS 6340 It includes an internal and external press and a stopper.
Simple mount for securing a 8541634849 driver board. This is the board that works with LP173WD1, N173FGE-L23, B173RW01, LTN173KT01, LTN173KT02, B140RTN02, N140O6, B140RW02, & N140FGE-L31 model LCD panels. Accepts 4x M3 threaded inserts…
Someone asked for a version with two icr123 and two cr2032 slots. So here it is. Look at the remix source for more info. Category: Other
Dual Philips Sonicare Toothbrush Holder (HX6340 Compatible) Tired of your electric toothbrushes constantly tipping over on the counter? This holder keeps them upright, stable, and organized. Designed to fit Philips Sonicare HX6340-style…
Based on @lev's V4 Skidi, this part allows you to mount the 16340 battery holders in front of the PCB where the 9V would normally go. They battery holders are put in place and then a soldering iron or hot steel implement is used to…
This is just something I sketched up quick to charge some 16340/RCR123A cells. It holds one 16340 cell, and has accommodations for a 1/4" spade on each end. Professionally I would recommend something UL rated, such as PETG V0. But I'm not…
As title, girlfriends machine broke the Lever (just old I guess). This is designed for use without the steel insert and will slot right onto the shaft. Bit of a squeeze to get past the covers, but easily do-able. Needs to be printed…
This 3D printed delete plate for replacing the OEM switch plates with a plain plate. Printed with ASA, reusing same OEM fasteners.
This is just something I sketched up quick to charge some 16340/RCR123A cells. It holds one 16340 cell, and has accommodations for a 1/4" spade on each end. Professionally I would recommend something UL rated, such as PETG V0. But I'm not…
Someone asked for a version with two icr123 and two cr2032 slots. So here it is. Look at the remix source for more info. Category: Other
This thing is for carrying four photo cells (ICR 123 or LC 16340). I use it to store the cells for my old FENIX P20 flashlight. You will also need: M3 x 20 mm screw M3 hexnut 4x neodymium magnet (h: 3 mm , d: 6 mm) some glue to fix the…
Just a simple cover to keep your 100mm Erowa chuck clean when either not in use, or no pallet is installed. I printed this 100% infill, using Polymaker ASA filament. I scale my ASA prints 100.5%, which seems to hit dimensions dead-on.
