Counting matching models…
a nice, sleek, vertical spool holder mount for the cr6se Print Settings Printer Brand: Creality Printer: CR6-SE Rafts: No Supports: Yes (PRINTBED ONLY!) Resolution: 0.2, 4 WALLS Infill: 40 Material: PLA, if you use an enclosue print in…
I reccomend that you print this out of PETG and also salvage and stick the original dust protective mesh onto the back of this one to protect your headphones driver.
Camera mount on the end of the X-Axis Tension Adjuster. I needed a camera mount for Octoprint for my Ender 2 Pro. All the ones out there interfered with the screen since it was on the left, and couldn't see the nozzle due to the unique…
Creality CR6SE Universal Camera Holder with movable arm. Easy to print. You can mount your camera in many positions on the arm. Simply mount it where it fits you the most. Infill: 30% Supports: Yes (It is better with them) Use M10x25…
Diseño de la tapa del extrusor de la impresora Creality CR6 SE. Está basado a partir de un archivo encontrado en Onshape, pero este no era igual al original. Se subieron los archivos .3mf adaptados para dos laminadores CR6SE_Tapa…
.3mf Files. Foots, Feet, Legs, Patas, Pies for / para CR6SE & Ender 3v2 (49.923mm) CCR6SE_E3v2_CR6SE_Feet.3mf CE3PRO_E3v2_CR6SE_back_Feet.3mf Soporte de patas en TPU / TPU legs support CE3PRO_Soporte TPU pies.3mf
Starsense & finder adapter This is made for a Celestron 6SE, but I've attached the FreeCAD file so you can adapt it. Any Skywatcher finder scope shoe will fit in the base, and the original Starsense base holds everything in place.…
I got fed up with existing tensioners for my printer and made these ones from scratch. You're gonna need four M5 bolts, two for the tensioners and two for mounting the Y tensioner. The required length is anywhere from 1 to 2cm, depending…
Bhatinov Filter for Celestron NexStar 6SE created using Bhatinov Mask Drawings Generator
You have a part mounted on your thing at position A, and you need it to be in position B, using the original screw holes at A. This is what you need. This will create an adaptor or jig that mounts to the part's original location and…
Easy CR 6 SE Cable Guide V1 has a hard top edge and corners V2 has a more rounded edges V3 Is 4mm taller if you like the clip please hit that like button and post a make pic :)
I have designed this bracket to fit on the back of the Celestron Nexstar 6SE, to allow for a dovetail to be mounted on the back of the telescope. This allows for a guidescope or any other scope with a dovetail hotshoe. I printed this in:…
This part seems to be easy to break especially if you carry it around without a protective hard case. I did it based on original measures but simplified compared to the original. So there is no weight reductive cutoffs etc. Made in…
UPDATE 15/01/2023 Added a stability clip to prevent movement, uses 2x m3 x 10mm screws with 2x m3 nuts (nuts on the inside) or alternatively superglue it to the printed shroud printing settings PETG or ABS 40% infill TREE SUPPORTS!!…
[CR6SE] Direct Drive and fan shroud dual fan for duel metal gear extrusion
This is a design I remixed for the CR-6SE that allows for a direct drive upgrade with a Duel Extruder Gear, similar to the image below The need for this is because the coupling for the PTFE tube is positioned higher to allow clearance for…
This is not going to be something that is downloaded by probably anyone, but I wanted to share just in case. I am using a Celestron Nexstar 6SE scope with the Hyperstar Mirror attached from Starizona, and connected to the Hyperstar is a…
CR6SE SILENCER just use double tape……
simple clip For the Creality CR6se Bowden tube & ribbon cable
**** Hold Off printing this as there are a few geometry errors that need to be fixed. I will be updating the STL file soon. *** This was a quick and dirty remix of the original “CR-10 Smart CR6 Direct Drive Upgrade to Bondtech LGX Lite”.…
I made this for my CR6-SE so I could put all the skirts, purge lines and filament scraps in - so I don't have to go to a bin every time. The base slides into the 2 slots in the 40mm x 40mm extrusion on the base of the printer. 10 holes (5…
I did not want to remove the handle + needed something to hold the serial mount
Replacing the standard Ender CR6 SE extruder with one of the many dual gear clones requires to modify the path from the filament sensor, eventually requiring to leave the filament sensor hanging, because the dual gear extruder are thicker…
My CR-6SE sits in a cabinet which used to house a rigidbot. The side-mounted spool on the CR-6SE makes it markedly wider than the Rigidbot, and the original top-mounted spool holder by Miller_Maker sat too high to fit in my cabinet. A…
The original X-axis belt tensioner locks the screws from the rear of the profile. If the locking is too hard, the plastic parts will break and become loose. This solves this problem. The screws will be locked from the front of the profile…
it's a bit stronger as the original. fit with the cable guide. Die original Halterung konnte ich nicht montieren, da ich eine Kabel-Hilfe motiernt habe. Ausserdem ist dieses Teil mit Streben verstärkt Print Settings Printer Brand:…
I printed the CR6SE Universal Camera Holder, but had trouble getting the camera to stay where I wanted it. Rather than find zip-ties, I decided to quickly model up a camera pad that took advantage of the M10x25 mount, but also allowed the…
Ich habe einen 5015 Lüfter für das Filament Getriebe hinzugefügt. Bei mir ist das Filament bei kleinen Objekten zu warm geworden und im Anschluss vom Getriebe zerrieben worden. Inzwischen habe ich keinen CR-6 SE mehr, mit diesem Add- on…
Flexible Z-axis trapezoid rod holder inspired by Prusa xl printer for Creality CR6 se.
This is a sliding clutch that retains manual focus on your 6SE telescope when using a automatic focus motor. Slide the large outer ring off one side of the splines to disengage the motor and manual focus your telescope. This is for a…
A quick remix of the awesome work done by PapaSpiro to fit the NexStar 6SE. I've included a small test model so that you can see if the bolt pattern lines up with your mounting holes. UPDATED: I was running into issues with the 28BYJ…
This is a top rail mounted tray to hold the Sunlu FilaDryer S1. It's a two piece design for strength. The rail part is slid into the tray from the top and secured with the M3x12 screws & nuts. I used Button head screws for the low…
I created this model to be used with 6"x6" solar film sheets that can be purchased on amazon. The only other required pieces are: 4 Heat Set Threaded Inserts (M3) 4 M3x12 Screws I've also included a carry case that protects the film when…
Picking the hobby back up again after a few years, I noticed that my dew shield wouldn't stay round so I decided to print a simple stiffener ring to make sure it held its shape. As a bonus, I designed in a small lip so the original…
Remix of: https://www.thingiverse.com/thing:4728371 I wanted a bit more height, in order to give the fans plenty of room for fresh air. I also added a big hole in the middle of them, so they aren't just solid plastic. Print Settings…
Ich habe einen 5015 Lüfter für das Filament Getriebe hinzugefügt. Bei mir ist das Filament bei kleinen Objekten zu warm geworden und im Anschluss vom Getriebe zerrieben worden. Inzwischen habe ich keinen CR-6 SE mehr, mit diesem Add- on…
MGN12c Z axis linear bearing mounts (40cm) for Creality CR6se. You need: 1. 2x linear bearing MGN12c with carriage (40 cm) 2. 2x extra carriage MGN12c 3. some M3x25 screws 4. some Nuts for Fastener Aluminum Profile M3 5. print 4 grips…
Tried to mount an UNITAK3D LED kit for an Ender 3 on my CR6SE. Unfortunately the CR6 frame has much less options to hide the cable than the Ender 3 frame. Therefore I decided to create a somewhat cablebridge over the left side of the…
My 2KG spool was about 6 inches long, so I created this to hold it. I made it 6.5", which is a bit bigger than It needed to be, but it works well.
plate pro bed Creality CR6SE - oměřeno z originálního PEI platu. Jedná se o kopii, rozměry nemusí přesně sedět.
This is a remix combining two nice designs for the Creality CR6-SE: a wiper from twystneko ( https://www.thingiverse.com/thing:4806304 ) a nice raspicam support from bomas_ulz (…
This model takes advantage of the work by Dor who created a nozzle wiper mount bracket that attaches to the bed where the RH stock glass bed retention clip is normally attached. Design Tips: The height of the brush can not be adjusted…
A quick remix of the awesome work done by PapaSpiro to fit the NexStar 6SE. I've included a small test model so that you can see if the bolt pattern lines up with your mounting holes. UPDATED: I was running into issues with the 28BYJ…
Picking the hobby back up again after a few years, I noticed that my dew shield wouldn't stay round so I decided to print a simple stiffener ring to make sure it held its shape. As a bonus, I designed in a small lip so the original…
Rendering 💡 Printing Tips for Carbon Effect Plates I personally printed the "Doro Grill" using a carbon fiber effect build plate. If you are planning to print on a carbon texture plate, I highly recommend the following settings for better…
Rendering 💡 Printing Tips for Carbon Effect Plates I personally printed the "Doro Grill" using a carbon fiber effect build plate. If you are planning to print on a carbon texture plate, I highly recommend the following settings for better…
Solar filter for Celestron Nexstar 6SE 3D printed parts STL file Material Filter holder Solar_Filter_Nexstar6SE_Filter_holder.stl ASA or ABS Filter cap Solar_Filter_Nexstar6SE_Cap.stl ASA, ABS or PETG Inner ring…
This is a re-mix for the CR-6se of the adapter plate used on the CR-10, it fits as close as possible to the connector clip without making changes or deletions. The holes for the printed Cable Guide are the same as on the CR-10, however…
At the original one the cable was always moving out of the holder when Z-axis was moving up. Now its better guided and fits to all cable guides, doesnt matter if you are placing it behind or before the Z support.
![[CR6SE] Direct Drive and fan shroud dual fan for duel metal gear extrusion](https://media.printables.com/media/prints/829859/images/6399130_bffdacaa-239d-4a98-9aec-c81844dbbf86_96dc6b30-057c-4e24-8db2-235873136c0c/ekran-goruntusu-2024-04-02-191236.png)
