Counting matching models…
⚫ Zetor 7711 ⚫ !!!Warning!!! Not suitable for small children. The model contains many small parts, risk of inhalation and suffocation. If you like my work, I will be very happy if you support me by giving me a follow and subscription on…
Made this for my drink mixer project to weigh the content added to a glass. I have the autocad file if anyone needs any changes to the scale or bottom. And if you liked my project please consider just tipping me for the fun of it. Print…
The cheap molded case that comes with these wrenches was way too big and bulky, so I made my own! I've caught the gridfinity bug, so I naturally made a version to be compatible with it. I use the 3x5 version, but I also uploaded a 4x5,…
This model is compatible with the lego system.
Want to have spare parts without waiting for shipping ? This is the front shock absorber mounting plate for the wltoys 124008. I print it with carbon fiber nylon. Probably stronger than the original part if used with longer bolts. It…
Adapted and more holes placed in top plate to make room for a 4-pin header coming from the HX711 of the Smart Bed occupancy sensor by Lukáš Porubcan . Category: DIY
Simple case for the HX 711 Board Print Settings Printer Brand: Ultimaker Printer: Ultimaker Original Rafts: No Supports: No Resolution: 0,2 Infill: 20 Category: Electronics
A frame and slider to hold and IEM inside of the IEC711 Stick Style Microphone. Use Blu-tack on the slider to create a better grip on the IEM. Use these Heat-Set inserts and a M3 Bolt to lock the slider in place. Additional Affiliate…
Simple enclosure for HX711 load cells weight display module. I have several weight scales and i connect the module using 4 pole phone jack + cable. It contains also space for 18650 battery and charging circuit. Used parts : weight display…
I made this enclosure so I can build a bee hive scale with four HX711 load cells on each corner. It's made to be used outside and can be sealed with a fitting o-ring. Also it's supposed to be screwed to a top and bottom frame, so that the…
Filament holder with scale compatible with the Filler system. https://www.printables.com/de/model/174620-filler-filament-holder Built in is a load cell for 3kg with HX711 module. !!! The diameter of the filament roll must be larger than…
Board clips in. Uses M3 screws to secure it. No supports needed. Be careful sliding the board in so the front fingers don't hit the PCB components. If top side tabs are too tight, trim them with a knife or side cutters. It's for the…
Inspired by the GRAS 45CC Compared to my old KB501X plate the DCHPF enables proper fitment of the headphone and the ability to measure left and right channel more seamlessly. Significantly more rigid structure, fully secured coupler and…
This is a scale case for a 5kg scale Module and the HX711 pcb. It can be connected to a RaspberryPI and used by the Octoprint Plugin “Filament Scale Enhanced” ( https://plugins.octoprint.org/plugins/filament_scale/ ) The filament spool…
Adapter für die integrierte Navi-Halterung (VW Teilenummer 150 035 936 A) des VW Up! 1.0 Passend z.B. für Brodit 711083 Passiv Holder mit Drehfuß für Apple iPhone Befestigung auf dem 3D-Druck Teil: mittels selbstschneidender Schrauben Je…
Test bracket for HX711 bar-type weight sensor.
This bushing mounts on the radiator and then sits on the radiator mount. It's used on a lot of 90's BMW's OEM part number: 17111178412 Print in TPU! 3 Walls, 30% gyroid infill
This is a bushing to replace the rubber bushings on the shift linkage to some VW/AUDI vehicles. Cross reference part number for the rubber bushing is 357711798. PLEASE use the correct materials if you plan on using this in the real world…
I used: fibre reinforced ABS 20 % infill 4 outer wall thickness 0,4mm nozzle no support but slower outerwall speed Might also work with generic ABS/ASA/PETG
Desk mount for USB Fingerprint reader - Chipsailing CS9711 / WA28. It fits a very popular USB fingerprint sensor from Amazon/AliExpress. I mounted mine under the desk and it allows me to login on the docked laptop when its is closed. This…
A low profile bracket to suite the Dell Broadcom 57711 10gb network card. Part numbers KJYD8 / 0KJYD8 Print with tree supports.
HX711 load cell display module box with battery and charging module. Assembly Notes/etc: The cover interferes with the charging board, just cut the lip away where it touches. It was easier to modify than measure and place in CAD for a one…
I'll need a touch protection for the electronic component nearby a load cell. On picture 2 you can see this was made for the pcb with the red frame. But this pcb didn't work for my project. So I used the other one. If you have the same…
I made this to house my HX711 boards along with my breadboard. Uploading in case somebody else finds it useful! Everything uses M2 screws and the center fits a 2.54mm pitch breadboard with 7x8 holes. There are indentations on the back…
Description: Build your own connected smart scale with this 3D printable enclosure! This design provides a robust and clean housing for the essential electronics, allowing you to create a WiFi-enabled scale that can send weight data to…
Simple enclosure for basic HX711 ADC modules, specifically the ones linked below. The lid won't fit with the included header pins so to use it you will need to use right-angle header pins or solder the wires directly to the board. I…
This ear piece was designed to replace the ear piece of a pair of Nike 7117 eye glasses. It may work on other frames as well. The model prints flat. After printing, apply heat to achieve the proper curve and fit.
You should use heat gun to form it to your car
A knob to reduce the swaying while rotating the X-axis knob of MF70, with a cake-like shape to offer different choices between accuracy and speed. An M3 x 25 hex screw and a corresponding square nut are required. Print Settings Printer…
I've made spare eyeglass tips for the Nike 7118. The part have been made symmetrical, you will lose the “desing” element but you will be able to print flat letf and right at the same time. Printed in TPU.
Universaladapter für die integrierte Navi-Halterung (VW Teilenummer 150 035 936 A) des VW Up! 1.0 Über https://www.printables.com/de/model/539941-vw-up-10-adapter-fur-handy-halterung-zb-brodit-711 , und Drehfuß des Brodit 711083 auf HAMA…
Playmobil Delorian Mirror - 6779711
This is the 3D model for a PCB I designed to connect a D1 Mini and an HX711 together with 4 load cells to create a scale or occupancy sensor. Case is designed to use a single m4x10 bolt and m4 nut. There are no traces that go to the hole…
Dies ist ein Rahmen der Gangschaltung um den Faltenbalg zu befestigen ( Leder version ) Satinschwarz Schutzhülle OEM 321 711 113 C für die Fahrzeuge: Passat 32b / 33b / GT BJ: 1982-1988 Polo2 Schrägheck / Steilheck / Derby 86C / 80 BJ:…
Inspired by the BitRat designed by yashmulgaonkar, I've modelled my own bit holder that helps carry the: Wera 4-in-1 hex key (Wera 9506) 711L mini ratchet Wera 50mm Bit Holder (shortened) 8x Hex Bits (All links are non-affiliated) Printed…
This part of machine is fragile and will eventually break after years of usage. So you can simply print it again. I have tried to glue the original part with no success. Printing it is a better solution. Hint: MUST BE PRINTED IN 100%…
Wave Washer for Playmobil SWAT-Rettungshelicopter (71149) Part No.: 30 26 4390
This model is compatible with the lego system.
Estoy resubiendo este modelo para que la comunidad de la nueva Creality HI (K2 Plus) pueda encontrarlo fácilmente aquí en Printables. Es un accesorio muy útil para monitorizar el giro del extrusor cuando el sistema CFS está cargando o…
Two types of buttons for Fujitsu-Siemens Lifebook S7110 keyboard. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.1mm Infill: 20% Filament: gembird PLA+ white Category: Replacement Parts
This is bushing for the upper radiator mount. You need two of these. Part Number: 17111150984 Print using TPU! 3 Walls, 30% gyroid infill
Remixed top cover for https://www.thingiverse.com/thing:3673207 . Original had holes in wrong places. Also replaced ventilation holes with stripes. Print instructions Category: Computer Summary Remixed top cover for…
Plate runner replacement for ariston microwave, suggested material ABS. You can isolate it from high temperature of food using a silicone or crock layer. Category: Kitchen & Dining
CZ: Šablona obsahuje 5 otvorů pro označení míst, kde je nutno vrtat (4x díra 4,3 mm a 1x díra 44 mm). EN: The template contains 5 holes for marking where to drill (4x holes 4.3 mm and 1x hole 44 mm).
Simple and compact handle for the new 711L Inline ratchet driver FL for when I can't use my Leatherman Arc. Friction fit but tolerance is good enough to hold it well with enough surface area for it without it falling off even when shaken.…
A cover for the wires of a HX711 load cell based set of scales used as a keg scale for Cornelius kegs and mini-kegs. This is inspired by the instructables post https://www.instructables.com/Beer-Keg-Scales/ The hx711 and related circuit…
Použil jsem držák váhy s těchto stránek a upravil jsem ho pro držáky Endr a podobné. Duležité: podívejte se jaký typ siloměru požívám, díra - M4 , rozdíl bývá dírách je buď M4-M5, pokud máte siloměr s dírou M5 použité držák pro siloměr ze…
Enclosure for Scale up to 10kg with Arduino and HX-711 Weightcell. For Project Details, Wiring and Code see: HX 711 basierte Waage Elektor Sparkfun I had 2 Metalcovers from an old PC or Server laying around and used them as Base and…
The original crank arm on my spreader became damaged, This is a printable replacement as Scotts does not offer a replacement. Printed in PETG for improved strength, durability, and outdoor use. The crank was designed with a reinforced…
I created this to support 3kg spool but the platform can be adapted to any other content.
This is a scale, printable model of the Adafruit Adafruit 12-Channel 16-bit PWM LED Driver - SPI Interface - TLC59711, which has an SPI interface and costs around $7.50. The product page for this device can be found here . I managed to…
$0.47 + shipping… orr 3D print one. Pics of the window hinge mechanism this part is from here, Andersen part 1352711. modeled from an existing one, dimensions fit when printed on my printer, may not fit on yours… This is a small piece and…
Experimental knob add-on for the 711L mini ratchet to test my suggestion for enhancement
A small 3D‑printable enclosure designed to fit an HX711 module with JST connectors.
711 inspired table lamp battery operated led lighting ambient lighting easy to assemble no ams needed LED Light from Amazon. You can also use anything similar.…
Simple base for a 27" HP 1080p Monitor. I have included the Sketchup file if you want to adjust it for your monitor. UPDATE: I added some support to the back to keep it from bending. Print Settings Printer: Sunlu S8 Rafts: No Supports: No…
Completely 3D printed, no additional parts needed, headphone measurement stand using clone E610A coupler and clone KB501X pinna. This design aims for a single ear measurement. For a double ear measurement, use smaller couplers or consider…
===== Only CZ ===== Licence: Stažením, použitím i tiskem tohoto modelu souhlasíte s licenčními podmínkami. Budu vděčný za drobný příspěvek na vývoj. Vás to nezruinuje a mi to pokryje část nákladů na materiál spotřebovaný na testovací…
This is a bit replacement that goes into the Leatherman bit holder to hold the a 7/11L ratchet in the kit. No need for a brim but you do need to remove the print in place supports. I run an etsy shop which you can buy this item from if…
This is a dual 50 KG load cell and associated HX711 amplifier holder. I'm using it to detect the presence in the bed of a handicapped relative. My intention is to use the setup to trigger a Zigbee door switch or leak detector so I can…
Printed in PCTG
This is the companion part to my replacement crank arm and is intended to replace the original rotating handle knob found at the end of the crank. The knob is designed to rotate freely on the crank arm, providing a comfortable grip while…
Hold 2 Spools up to 5 kg and measure the weight of each spool seperate. You need 2 HX711 Sensors with 2 Boards and a MH-ET Live board. Software for the MH-ET Live is currently ESPHome to gather the data to HomeAssistant and calcualte…
A pocket friendly minimalistick holder for 711L Mini Ratchet Wrench and two Bit Driver Extension / T-Handle. Couldn't decide on the layout so created different size versions and done a version witch carry's extra bits :)
case for holding hx711 and arduino pro micro
TOUAREG 7L MANUAL TRANSMISSION - 7L6 711 113 E PLL - 7L6711113EPLL
Hideg indító kábel diselhez és kézi karburátorhoz. Pteg és TPU95A és bármien vezetákes kűbellel befűzhető, ideiglenes vagy helyetesítő pótalkatrész. 161711501/C https://www.heritagepartscentre.com/eu/161711501c-choke-cold-start-cable.html…
This prints just fine for me vertically with no supports. Printed using Overture PLA.
Friend.Tech 3D printable fan art merch designed and printed by by sonyx.eth : linktr.ee/3esign // https://friend.tech/sonyxeth // https://www.friend.tech/clubs/177915 // https://www.friend.tech/clubs/171788 //…
A filing jig for use with Calrad 30-711 3.5mm TRS chassis mount snap-in Jacks
playmobil 7116800 2 - 6551544
playmobil7116780 1 - 6551580
Print as strong as you can for obvious reasons. I used: 5 perimeters 5 top layers 40% infill filament rosa 3d PC-PBT+15GF
Print with PETG. Meant to go through the slot behind the front cover. Use a shallow connector like the JST PH 2.54mm on the board side.
A replacement intake boot for the BMW E12 E28 E24 E23 and 2500 series cars using the M30 series of engines. This is a replacement for BMW part number 13711261370. I printed this part out of Bambu TPU 95A and installed it on 9/5/2026. I…
VAG 811711279 TPU only (print with the hole facing up)
I couldn't stomach paying over $4 each for MDF or wood corners to match the baseboard to repair my house. So here they are at about 48 cents for 4 if you believe slicer price calculation. These mount, prime and paint just like the wood…
This is a holder to add space for the 711L 4mm ratchet and a short 4mm extension to any Wera Tool-Check. It's most useful with the Modular Micro 1. The ratchet comes in 2 versions, this is for the knurled version. I don't know if the…
This is just a very simple rack I modeled up to hold a set of the HP711 cartridges for the DesignJet T520 we have at work, so we'd have them handy come replacement time. I used VHB tape to stick it to the side of the printer because we…
Feet for Tablet and Notebook Stand . print 2x each in TPU. Add some glue to secure the feet.
After the razor fell, as it turned out after disassembly, the plastic gear in the cutting head drive split and jammed the mechanism. To replace it, I drew a 23-tooth gear and printed it out from PETG. Material: PET-G / NYLON Layer height:…
This model is compatible with the lego system.
Inspired by the BitRat designed by yashmulgaonkar, I've modelled my own bit holder that helps carry the: Wera 4-in-1 hex key (Wera 9506) 711L mini ratchet Wera 50mm Bit Holder (shortened) 8x Hex Bits (All links are non-affiliated) Printed…
A small 3D‑printable enclosure designed to fit an HX711 module with JST connectors.
Completely 3D printed, no additional parts needed, headphone measurement stand using clone E610A coupler and clone KB501X pinna. This design aims for a single ear measurement. For a double ear measurement, use smaller couplers or consider…
Fender bracket Holder / wheel house stiffener,left/right for Peugeot 405 7119.63/7120.92. Very rare spare part, laser cut from ~ 1mm steel and bend or thicken up and 3d print if you feel brave.
A jig for cutting a 2280 NVMe SSD to make it a 2230 NVMe SSD Especially for hynix BC711
For all those who, like me, use the IKEA SKURUP work/wall lamp, black and, like me, no longer have the corresponding wall mount, here is a possible solution. Dimensions: Diameter: 70mm Total height: 20mm Height of the plate: 5mm Height of…
General The original Honda fuel filter with the part number 16900-MG8-003 is either expensive (Genuine Honda) or from questionable quality (China). The MANN WK 32/7 filter is readily available for less than 10€ at all (European) parts…
Pocket organizer for Leatherman bit holder, bit extension, and 711L mini ratchet.
This model is compatible with the lego system.
Upgrade your Leatherman or 711L inline ratchet with this compact ergonomic handle . Designed for flat ratchet inserts, this lightweight yet sturdy handle improves grip, control, and comfort during use — perfect for everyday carry and…
This model is compatible with the lego system.
soporte de control de la marca lg impreso con filamento PLA con relleno de 20%
I needed a bunch of these outdoor cases for a property I was turning into a big hotspot so I designed one. I usually use PETG for outdoor enclosures. Just hang it on the wall and cover the reflector with aluminum tape (used in duct work)…
I needed about fifty of these so I drew one up. I usually use PETG but use what you want. Feet are also included and you can hang it on the wall and cover the reflector with aluminum tape (used in duct work) to enhance coverage into…
This model is compatible with the lego system.
Feet for Tablet and Notebook Stand . print 2x each in TPU. Add some glue to secure the feet.
After the razor fell, as it turned out after disassembly, the plastic gear in the cutting head drive split and jammed the mechanism. To replace it, I drew a 23-tooth gear and printed it out from PETG. Material: PET-G / NYLON Layer height:…
