Replacement Crank Arm for Scotts Handy Green 2 Hand Spreader #71133
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A replacement crank arm designed for the Scotts Handy Green 2 Hand Spreader (Model #71133).
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 21
- Makes
- 0
- Views
- 65
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial
The original crank arm on my spreader became damaged, This is a printable replacement as Scotts does not offer a replacement.
Printed in PETG for improved strength, durability, and outdoor use. The crank was designed with a reinforced structure to handle the repeated twisting load during operation.
Print Settings
Material: PETG
Walls / Perimeters: 4
Infill: 100% Gyroid
Layer height: Your preferred PETG profile
Notes
PETG is recommended for this application due to its toughness and better temperature resistance.
Print orientation may affect strength; the included model is intended to maximize the crank arm's resistance to twisting forces.
To install, squeeze the split handle pin end together on the backside of the crank and push handle out. Simply press it into the replacement crank and remount crank to shaft.
If you need a matching crank handle let me know in the comments and I can design one