Counting matching models…
A part cooling fan mount and nozzle for the 713Maker ball cup effector plate using a 3010 blower. I am rebuilding my old MakerLibre 1515 Mini Kossel and upgrading it along the way. I decided to go with the SeeMeCNC ball-joint effector…
This is a magnetic mounted z-probe using a mechanical end-stop switch. I am rebuilding my old MakerLibre 1515 Mini Kossel and upgrading it along the way. I decided to go with the SeeMeCNC ball-joint effector arms and their molded platform…
I designed these parts to switch my SeeMeCNC Rostock Max v2, with 713maker Rostock effector, over to using a direct-drive extruder. The parts are: Motor mount Adapts the Orbiter v2 extruder's mount to the effector plate. Also raises the…
This is a remix of printingotb 's OptiCooler for the Folger Tech FT-5. I am running the 713Maker Ultralight carrier with the stock MK9 hotend for now, but it may also work with the Titan Aero extruder. The fan bracket simply mounts to the…
I used PLA with 75% infill. Edit - 2/7/23 I added a model for the right side that is a little close and I shrunk the height by 5mm. This time I printed with PETG.
This is for a Ft-6 (maybe ft-5) with a Maker 713 Standard Carriage a 42BYGH40H-23D stepper motor and a Bondtech BMG-M with Mosquito hotend -moved the bltouch behind the hotend for better cooling with 30mm fan -moved the fan ducts for…
This is a model to mount a Bondtech BMG X2 and E3D Cyclops+Aqua directly to a 713maker effector plate. This is one of the few dual direct extrusion methods available. Category: 3D Printer Accessories
(note! The stl for the "frame" (or cage) part has been updated to fix a reported problem with fitting at the top between the Ultralight mount's screws and the motor. With the revised "Frame.stl", no sanding should be needed now.) :)…
Made to hold a micro Fpv camera on a 713maker Standard Carriage slots under stepper motor and is held in with stock 713maker screw I used the Runcam micro eagle because it's small/light and has a m12 lens I swaped it to a m12 f8.0mm for…
After upgrading to the 713Maker mount ( http://713maker.com/mounts.html ) for my E3Dv6, I found that the original slim fan shroud was too small. I remixed Noircogi's design to be both longer so it'll reach the print area, and added a gap…
A part cooling fan mount and nozzle for the 713Maker ball cup effector plate using a 3010 blower. I am rebuilding my old MakerLibre 1515 Mini Kossel and upgrading it along the way. I decided to go with the SeeMeCNC ball-joint effector…
Here's a E3D Titan aqua mount for 713maker effector plate I designed. This model can only be pulled off if your printer is particularly dimensionally accurate and is capable of bridging a circular gap. It's used on my ultibots D300VS+ but…
