109 models
This part is used to adjust and secure scale indicator of Dewalt DWE7492 table saw and avoid plastic distortion of original indicator when securing screws Remix from https://www.thingiverse.com/thing:4602164 Part has been redesigned to…
Print approx. €0.17–€0.21 excl. taxPreliminary estimate for one variant
I was needing to connect a vacuum hose to my table saw to extract wood chips and dust I designed the part in Fusion 360 with a cone to enter the table saw exits and an internal screw thread for the vacuum hose. After several tests I found…
Print approx. €4.16–€5.08 excl. taxPreliminary estimate for PETGSource material: PET
Print Setting PETG 0.3mm draft
Print approx. €1.47–€1.80 excl. taxPreliminary estimate for PETGSource material: PET
Wandhalterung / Wallmount for AVM FritzBox! 7490, 7590, 3490, 6490, 6890, 5491, 5490 Lochabstand 197mm space between router holes = 197mm NEW Wallmount for 7530 with PETg from DasFilament Print Settings Printer Brand: Creality Printer:…
How to use the jig: 1) set the slider to the desired thickness 2) set it slightly before the blade 3) move the parallel guide until the wood touches the bearing, then fix it in position 4) perform the cut 5) repeat step 3) and 4)…
I found a well designed jig on the internet but because I already spent too much money on jigs and tools I built one myself. For your convenience I've included all Fusion 360 files so you can make changes to the design. To make…
This is a remix of two designs to get the best of both for my DeWalt Table saw with metric nuts and bolts. Following Designs are used: Sliding Block: www.thingiverse.com/thing:3973092 The block was dapted to fit for the DeWalt 7491 & 7492…
I redesigned this throat plate eliminating the screw holes and lock (lock is not necessary to have). I have fine tuned the bottom feet to be the exact height to level the plate with the table saw top (you can slightly sand these feet if a…
This model is compatible with the lego system.
I ended up slightly modifying the slots on the featherboard, as well as designing new knobs and slides, all of which fit common-to-the-US 1/4-20 UNC hardware. Use lock nuts in the knobs and standard 2-inch-long hex bolts in the slides.…
The model has been cut into several section to be able to print it without support. It has been increased in size to a length of 250mm. To make the lineup for the gluing easier FilaPins are added to each cut. For that you will need 6…
Because I broke my tablesaw insert plate, I needed to design this replacement part. I made it as accurate as possible and in two parts so it fits on the build plate. It is not a ‘zero clearance’ version, but as the pictures show a…
This is an adjustment jig for the DeWalt DWE 7492 and the DWE 7485 table saw. The set consists of multiple pieces for the adjustment of the fence and the blade relative to the miter slots of the table. Please pick the right extension…
Link zum OSVac System: https://ossso.de/osvac/ Adapter für die Tischkreissäge DeWalt DWE 7492 um diese mit dem OSVac System zu verbinden. An dem Adapter wird auch gleich die Absaugung für die obere Abdeckung angeschlossen. Druckdaten:…
Marginally adapted the Featherboard. Created a new miter runner which is optimized for DeWalt 7492, based on my other design, using M5 nuts. Used my standard M5 star knob Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No…
Just another Zero Clearance that fit for Dewalt 7492 with stock equipement. Print Settings Printer Brand: Creality Printer: CR10S PRO **Rafts:** No Supports: Yes **Resolution:** 0.20 Infill: 20 **Filament:** Amazon BasicFil PLA…
This much more precise miter gauge helps to avoid the play between the groove and the standard miter. Depending on your print settings, you might want to print a section first to check the fit in the groove. it requires 2x M5 and 1x M6…
Simple adapter to attach a shop vac to a dewalt 7491 table saw (probably works with other saws?). Designed in Tinkercad. One of these years I'll make one in Fusion.
DEWALT table saw that is nearly 1:1 ratio to the actual DWE7492. I created this model for designing a workbench in my workshop.
Hey guys i'd like to share my recent bigger project with you, my 10 inch Network Rack. I was always disappointed when i saw all the mess and not really organized cabling and setup of my network devices at home. Inspired by another 10inch…
These adapters are made for the DEWALT DWE7492 Table saw adapter : - ID 35mm for shop vac - Port for 31.5mm ID hose to riving knife Riving knife adapter : - Tapered that goes inside the riving knife - Port for 31.5mm ID hose Fusion 360…
I really like the replaceable head design from Featherboard with Replaceable Heads (m6) but some parts of the original don't work that well for me. Therefore I changed the design to accept 5/16" nuts and bolts and optimize it for Dewalt…
At first I just wanted to change the height of the original model to fit my Latitude 7490. After printing small slice of model to test fit, I realized that's all you need. It prints below 10min and uses ~30cm of filament. Tested with…
Just a fixation for the Dewalt Tablesaw 7492 You have the choice of locking it with upper part or just let it loose …
This adapter is curved so you can use inside a wood table and use a vacuum with 40mm hose. Curved prints are hard to print without support so I added also gcode with tree support as I have printed it. You can move printed part also when…
Dust Port elbow for the 7491 Dewalt Table Saw. The port on my saw measures 64.5mm OD at opening and tapers out to 65.2mm OD about 1-1/2" in. If you have any doubt about the size, print the first 20mm and check for fit. I was surprised how…
This is an additional version of Part 3 and 4 of the NCC-74959 Voyager. Displaying the model in warp flight with lifted warp nacelles. You will need Part 1 and 2 from this version:…
Blade Guard Dust Port for the Dewalt 7492 for the osVAC system. Spanhauben Adapter für die Dewalt 7492 für das osVAC system. Weitere Links/Details: Allgemeine Infos zum osVAC System: https://ossso.de/osvac/ Weitere Adapter von…
The grey hoses from my printed parts to the table saw are standard vacuumer hoses. The thread was a raw estimation, but it fitted at the first try. (yeah) it is left-handed. If you have another hose it should be easy to change the thread.…
I recently built a worktable with a space for my dewalt 7485 tablesaw in one end. As the table is on wheels, the saw sometimes get a little out of allignment when moving the table around. Also, the wood got slightly out of allignment…
Printed on Ender 3. Place model standing upright Help save your USB-C port on your laptop by printing and using a simple load saver.
This is a 60 mm male adapter for the osVAC system by Hobbyhimmel. Weitere Links/Details: Allgemeine Infos zum osVAC System: https://ossso.de/osvac/ Weitere Adapter von Hobbyhimmel:…
This adapter allows 1 vacuum to connect to both the main dust port and the blade guard dust port at the same time.
A quick'n'dirty remix of a FritzBox Wallmount with flat backplate for double sided gluetape
These clips are made for the DEWALT DWE7492 These clips allow you to hold and remove the tablesaw when it's needed. No need to unscrew it, just grab it and move. I recommend you to print it with the " U " face against the bed. My table…
This model is compatible with the lego system.
Allows the Fritzbox 7490 to be mounted under an desk. Easy print
Use this prints if you placed your Table Saw in place and you don't want to move it again. I used screw for wood to place it. I used two peaces of them but one is enough. There are 2 files: Low is for lower tubolar of table saw. Here I…
Customized version of https://www.thingiverse.com/thing:1246651 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing\_id=1246651 Print instructions Customized using the following options: LargeEndMeasured =…
osVAC Adapter for the lower vaccuum port of the DeWalt DWE 7492 table saw. I printed in PETG, but other materials should work, too. No supports needed when you print with the table saw side facing the printing bed. Feedback Feedback?…
This model is compatible with the lego system.
Good day, printhead's! Designed this for my workshop Dewalt DWE7492 power tool vacum connection. Also, because I use osVAC system all over the shop, added male end to both vacum connections. osVAC male ends M32 Dewalt outlet D60…
This allows you to directly connect a 1.25" (31mm) Shop-Vac hose directly to the exhaust of a Skil 7492 Orbital Sander. Link to OnShape model . It may work on other sanders with the following specs: OD of exhaust port: Approx 38mm Pins:…
A quick-to-print bracket for attaching the Fritz!Box 7490 router to the IKEA Skadis. Printed with PLA 0.2mm layer height and with supports. Pay attention to the alignment of the model, the flattened holding arm should be on the print bed.…
This model is compatible with the lego system.
I designed this wall mount for my FRITZ!Box 7490. The router is placed right next to power outlets, so i did not want to drill any holes nearby. Just use some double sided tape to mount it to the wall. Outside dimensions of the Model:…
Pour relier les deux sorties d'aspiration d'une scies sous table DW7492 (valable aussi pour les variantes Dewalt DW7491 et DW7485) à un aspirateur à copeaux et son tuyau de 100mm, voici un adaptateur sur mesure. Les embouts sont…
This fits dial guages that are 3/8" diameter. Used to align your table saw.
Dewalt 7492 Router Fence holder that fit to 2 layers of 18mm playwood
Update If you use the osVAC system, have a look at the similar osVAC compatible vacuum adapter I made that you can use to connect your DeWalt table saw to the osVAC system here:…
I print it all in PLA without support. Nozzle 0.6; Layer Hight 0,36
TDA7492 Amplifier Enclosure with SMPS and DAC. This enclosure houses the following components as seen in the pictures 1x TDA7492 100W amplifier 1x Arylic - Up2Stream Mini V3 1x 24V 6A SMPS 1x 150W DC-DC Buck Converter ( Bad idea, too much…
In der Scheune wird es im Sommer zu warm und die Fritzbox hängt sich auf, daher nun eine Variante mit Lüfter, welcher vom USB betrieben wird. Mit genug Platz für Luftzirkulation sinkt die Temperatur drastisch. Lüfter ist seitlich versetzt…
This model is compatible with the lego system.
print the model with supports as it was created. I recommend at least PETG material
Gottlieb star post part number C17492CR for pinball machines. Set at 0.5" hole spacing for now. Print instructions Unassociated tags: star post Category: Mechanical Toys
FRITZBox! 7490 distance wall mount Have Fun, don´t hesitate to give a like or post a make picture. Open for any improvement ideas.- just send me a message. Category: Office
The Dewalt DWE7492 - SHOPVAC CAMLOCK adapter is an accessory designed to connect the dust extraction port of the machine to the SHOPVAC CAMLOCK vacuum system.
AVM FritzBox 7490 Wandkonsole Wandkonsole.stl - ohne Beschriftung WandkonsoleBes.stl - mit Beschriftung Print Settings Printer Brand: Creality Printer: CR-10S Rafts: Doesn't Matter Supports: Doesn't Matter Infill: 20 Filament: janbex PLA…
These bins are to fit inside the original trays that come as standard, (they are not replacement bins). These are for the deeper Pro organiser cases and all trays are 86mm deep. You can of course scale the Z axis in your slicer if you…
I did not want to spend $27 for a tiny roller so I took measurements with a caliper and duplicated the part. The only difference is that this is not two pieces with a clear roller over an inner ring, it is a single part. Functionally it…
Upgraded Version of the original File with adjustable T-Slot slider! You can use the original 8mm dial indicator mount from the original author. Fusion 360 File is added! Thanks to the original owner!
The Dewalt DWE7492 - SHOPVAC CAMLOCK adapter is an accessory designed to connect the dust extraction port of the machine to the SHOPVAC CAMLOCK vacuum system.
Duto de ar para serra Dewalt 7492
Il s'agit d'un support d'adaptation afin de fixer le support de téléphone pour fourche de moto Quadlock sur une Ducati 749 (ou 999).
This model is compatible with the lego system.
A case for a small TDA7498 amplifier board with fuse and screw clamp holder.
Delta Faucet RP37490 Victorian Stabilization Plate Adds support to heavy or high-rise faucets mounted on stainless steel sinks For use with Victorian, Pilar, Talbott, Leland and Waterfall series kitchen faucets Mounts under the sink…
I resized the slot to .1mm this should make it much closer to being zero clearance. Increase the walls in your slicer.
Parts slightly modified to suit the characteristics of 3D printing
A case for a very common TDA7492P AMP. I designed it to fit very tight and without using any screws. Print Settings Rafts: Doesn't Matter Supports: No Category: Electronics
Als ich meine Tischkreissäge geliefert bekommen habe, war das Handrad zum Verstellen des Parallelanschlags kaputt. Kurzerhand habe ich es nachgebaut und gedruckt. Es funktioniert tadellos. Passt für: DWE7485 DWE7492 (in der Theorie sollte…
The Dewalt DWE7492 - SHOPVAC CAMLOCK saw blade extraction adapter is an accessory designed to connect the dust extraction port of the saw blade extraction to the SHOPVAC CAMLOCK vacuum system. For assembly I used one M3x6, one M3x10 and…
Remix miter insert, for compatibility with zero clearance module. After print just click it in! No glue needed. As a bonus, when the zero-clearance insert wears out, it can be easily replaced. you can use my remix (screw holes removed)…
A place for my Fritz!Box using the excellent ESRack system by @EvilProphet . It's a huge print, it barely fits on the bed of my Sovol SV08… but the width of the Fritz!Box is larger than a 50% module, so I went this route. If you try using…
This faceplate is for the TDA7492P Stereo Amplifier Board with buttons.
This was created to replace the adjustment gear on a DeWalt 7749 radial saw.
All printed at .2mm layer height. Support only needed for the rim Please don't forget to like and upload a print you may have done
This is a precision-modeled replica of the Short Curved Rail found in various LEGO Duplo train sets. Whether you have lost a piece, broken one, or simply want to expand your track layout without breaking the bank, this print gets the job…
Add some clearance between buttons and P2 connector, added some voronoi on top and a slot over the screws and text TDA7492P. Category: Audio
3 Layer Top & Bottom 3 Perimeters Print Settings Printer Brand: Prusa Printer: I3 MK3S **Rafts:** No Supports: No **Resolution:** 0.3 Infill: 10% **Filament:** Sunlu PETG Black Category: Automotive
Many VAG cars from (VW, Skoda, Seat) have a bump stop to keep the rear hatch firm without creating rattling noises while driving. With my Polo V, I was wondering where the noise was coming from until I saw that on one side the rubber was…
Step 1 Buy https://vi.aliexpress.com/item/4000231020672.html Step 2 Buy four 3mm diameter 16-20 mm long self tapping wood screws with tapered head. European screws are the best. Tapered at 45 degree angle and you can buy them by the kilo.…
I couldn’t find an STL to connect my DeWalt DWE7491 table saw to my DeWalt DXV09P shop vac, so I made one. This adapter helps improve dust collection by creating a solid connection between the saw and vacuum hose. Designed while learning…
Crudely added a dust shroud to the user end of the tablesaw to help reduce the amount of dust that is thrown out of the gaps. Checkout the original model for the rest of the parts.…
Lego compatible FRAME 3X19 (67491)
The clip for the steering column cover breaks easily and at that point you either live with the ugliness, you buy a brand new cover or… you 3D print this! I recommend you print using black ABS.
Briggs & Stratton 494439 Rotating Screen Replaces 690749, 691055, 805723 Replaces Old Briggs # 690749, 691055, 805723, 497417, 491793, 807566, 280829, 224135 Print upside down and no supports needed. I wouldn't recommend PLA because it'll…
DeWALT DWE7492 → DXV20PC vacuum dust reduction Parametric 3D-printed adapter that connects the rear dust port of the DeWALT DWE7492 table saw directly to a DeWALT DXV20PC wet/dry vacuum hose — no duct tape, no rubber sleeve, no two…
Adapter to connect a house vacuum 1 3/8" I.D. hose to the DWE7491 table saw. Adapter press fits onto table saw sawdust output, and the vacuum press fits onto the other end of the adapter.
Sehr einfach gehaltener Druck eines Gehäuses für die TDA7498E Platine. Standarteinstellungen vom Drucker "K1C-2025" Es wurde in PETG gedruckt, weil es bei mir in den VW-Bus kommt aber geht natürlich auch jedes andere Filament
I created a simple track slide for the Dewalt DWE7491RS to fit this featherboard here: https://www.printables.com/model/172907-featherboard-for-woodworking-no-supports-needed-wi I've included 4 files, one with no hole (you can use this…
5 stk. 12x12 button: https://www.ebay.com/itm/10pcs-Momentary-Tact-Tactile-Push-Button-Switch-12x12x12mm-4-Pin-w-Cap-LW/182387276369?epid=1149396745&hash=item2a7720fa51:g:rYkAAOSwEzxYT1ik 6 stk. m2 screws:…
Hello guys, you can easily put XH-A105. In the top lid there is a mount for 80mm fan. If you want use FAN you need to put 12V voltage to your board, otherwise you'll need to use step-down converter.
Need space for Commander Decks and Playmat in your Stanley Toolbox? Look at my solution. Works for me perfectly over month
Box for your Dices or small parts like Counter or what else. I use this Box for my +1/+1 and -1/-1 Dices.
A remix of the RAK19003 case originally designed by N7TRX , adapted to fit a 3000mAh LiPo battery (size 974958) . Notes: Ultra-compact: Space inside is tight, so take care when routing your cables. Snap-fit: At 100% scale, the shell snaps…
Dust extraction adapter for the DeWalt DWE7492 250 mm table saw. Size: Ø59.8 × 92 mm. Part of my set of dust extraction adapters that connect my (mostly Makita) power tools to a Narex VYS 33-21 L shop vacuum – see the collection Makita…
