Counting matching models…
Replacement sliders for Beyerdynamic DT 770/880/990 headphones. Yes, you can buy original replacement parts – for an insane price! Also they will break after a short time again because they are just too fragile. This is a remix of…
Remix of a remix of a remix, I really wanted the replacement to be as similar as possible to the original part, so I added a Beyerdynamic logo and L/R indicators. IMPORTANT: Printed with a 0.25mm nozzle using Prusaslicer 2.5 with Arachne…
This model is compatible with the lego system.
Spare part for beyerdynamic headphones dt 990 / 770 / 880 pro. This beyerdynamic headphones are my absolute favorites, but after some time the plastic parts one the site tent to break. I made some spare parts for that, it should be pretty…
Beyerdynamic Hinge Slider Replacement/Upgrade for DT770 Pro, DT770 M, DT990 Pro, DT990, DT880, Custom One Pro Plus, TYGR 300 R and MMX300 MK2
The original broke so I printed a pair of those brackets. The cable (connecting left to right speaker) constantly moved between bracket and my head, resulting in uncomfortable pressure points above my ears. Therefore, I remodeled the…
Beautiful pen vase with vertical ridges. It is for decorative purposes to hold pens and pencils. It is 110mm tall and 68mm wide. Print time approximately 2 hours 30 min. The photo shows the vase can be printed in vase mode. It can be…
Update 11/19/2025 - Recent request for the outside slider cover, so I decided to go ahead and add it in. I also did a mild update to the inside slider cover. I think I can do a better job but if this means someone's headphones work vs…
One of the latches on my Ryobi 18V Cordless Wet/Dry vac came off and got lost. I modeled a fully printable replacement that feels a lot like the original, but is easy to 3d print and is strong when printed in ABS or ASA. I used supports…
The rotating joint/hinge on my Sony MDR-ZX770BN Bluetooth headphones broke on both sides. This piece attaches on both sides of the ear-cup hinge, encapsulates the existing, broken axle and puts a new one on top. Installation: Move the…
Adolf Hitler - Mercedes 770k Attention! This is not a promotion of Nazism and fascism!
Created in Autodesk Maya as my scanner does not work on smaller than 100mm*100mm*100mm
Diese Freilaufbühne ermöglicht es, Modellfahrzeuge im Stand einem “Probelauf” zu unterziegen und Einstellarbeiten am Antrieb (Antriebswellen, Schaltung, Getriebeansteuerung) durchzuführen. Die führenden Zahnstangen verfügen über ein 2 mm…
A wheel cap for Renault Laguna I Part: 7700428725 I scanned an original wheel cap and modeled the part in CAD based on the mesh. Printed upright with tree supports in PETG.
Die Extra-Blende für die Eurobox bietet einen effektiven Schutz vor Staub, Schmutz und kleinen Tieren. Leicht anzubringen, bildet sie eine zuverlässige Barriere, um die Inhalte der Eurobox sauber und unversehrt zu halten. Eine praktische…
This is a highly accurate model of 770 based off of photogrammetry scan data. It has been made into a wall mounted tzedaka box. You will have to clear out the holes with a knife. The nameplate is blank so you can add a name or any text…
So the case for my flash drive broke and I designed my own. It has some honeycomb openings for cooling and better grip. It also has an eyelet to attach to a string or key chain. I put my name on the base of my personal flash drive. That…
I wanted to mount a 140mm fan to my BD770i for additional air flow. However, the included bracket only allows for mounting of a 120mm fan. This mount allows a 140mm fan to be mounted offset to the I/O shield and bolts into the existing…
Use typical M3 threaded inserts along with M3x8 bolts.
Printed in Voxel PLA+ I used hot glue to help everything stay together
Hi, this is my custom model for the outer slider plastics for the dt1990 and dt1770 headsets which is currently (aside from this now) only available from Beyerdynamic as part of a 40-euro slider replacement kit. The part put into use by…
3 Part Dell Precision 7670 Laptop Stand. You will need 4mm rods cut down to 25cm length. Do not damage the laptop you should use Tape foam on the Touching areas.
Since the original sliders regularly break in the same place and the original replacement part is only available as a set with rockers and screws, I have tried to design a more robust version of the slider housing. Even if they break just…
Zwei Servoaufnahmen für den Scania S770 8x8 von Carson Tamiya, je eine Aufnahme für die Entriegelung der Anhängerkupplung/Sattelplatte Update vom 18.03.24: Fehlende Datei für AHK-Servoaufnahme ergänzt
Fully replacement for Sony MDR-ZX770BN hinge. This is left-side par, for other side please make a mirror one.
I recommend using a layer height of 0.15mm or smaller to give the print a smooth finish. This way it will nor wear off the headphones somewhat delicate padding. Using selective support recommended (see 3MF file). No further requirements.…
Case for HW770 bluetooth module. Step editable in case of using of more IO
This is a clip-in tray for the veml7700 sensor board. I made this as an add-on for an enclosure. It has a small window to expose the sensor but still hold the board firmly in place. Add to you own favourite enclosure together with your…
As is the custom on Chanukah, besides for lighting a personal Menorah, we also light a public Menorah in Shull (synagogue) every day of Chanukah. In 770, Chabad Lubavitch headquarters (in Brooklyn) they use a 6' menorah, and its design is…
The Minisforum ITX boards support an unusual hole placing for the cooler mounts, 52mm on the edges. The model by NAnglo uses a slighty wider spacing, therefore I needed to adapt it a little bit. Print with temperature resistant and robust…
This is a replacement for the DT990 slider housing that I modeled after mine cracked. Beyerdynamic offer a replacement part for sale but I didnt want to pay as it was simple enough to model. Print both sides with the flat face down…
Slightly modified version of Volans design to make it fit a little bit better and give it slightly more notch-feel. Tested on my DT770 Pro headphones and now they feel exactly the same as the original ones. I printed them with a 0.6mm…
A replacement slider assembly for Beyerdynamic T90 and T70 headphones. Looks like it will probably fit T1/T5 and others.
Helps to contain the accessories for a Philips MG7770 shaver in a convenient box. This shaver is also known as the Multigroom series 7000 18-in-1, Face, Hair and Body . Makes it easy to find the right comb and avoid a cluttered cupboard!…
Tefillin with a print of the Lubavitch Rebbe in the shape of the Lubavitch World Center. 770 Eastern Parkway - Chabad World Center, known as 770 after the house number, is a Chabad Hasidic center that also served as the beit medrasham of…
Converts your old analogue photo enlarger chassis to a copy stand for your DSLR digital camera. Inspired by the product “Copy Camera Adapter for LPL 7700 / 670XL Enlargers”, which apparently isn't available to buy anymore (and which was…
A simple clip similar to the one that comes with the BTR5 to mount directly to your headphones with no drilling required!! The clip simply wraps around the left cup arm and secures to the case with two screws. For this project, you will…
Veml 7700 outdoor case Cover for veml7700 by adafruit, for outdoor weather station. The box is divided into two parts. The upper part is made of transparent PET-G filament with 100% filling. The hexagon on top should help guide the light…
Since the included ear pads of the MMX200 unfortunately tend to break quite often, I designed an adapter to mount the DT770PRO ear pads onto the MMX200. The adapter consists of two parts: Part 1 attaches to the MMX200. Part 2 holds the…
The motherboard comes with 120mm cooler mount, which may not be optimal for some builds. A 92mm cooler is the same width as the radiator. Hardware needed: 6 screws for mounting the brackets to the radiator, they come with the motherboard…
To make it into a lapel pin, I used a magnetic sheet cut out 2 pieces, and stuck one on the back of the shovel and the other on the inside of my jacket. The international headquarters of the Chabad-Lubavitch movement, under the…
One of my first designs and main reasons to want a 3D printer. I tried to find this piece everywhere I could. Even tried contacting Sony trough an official repair store. The only offer I got was about the whole headband for 50€. Since I…
Mount to put your ThinkCentre Power Supply under the table
Reaplacement part for Beyerdynamic DT 770/880/990 headphones, to be used with original screws. Designed from scratch based on the original ones, intended to be stronger. Recommended settings: PLA at 0.15 or 0.2 layer height, no supports…
Inspired by: https://inevitablecraftslab.wordpress.com/2020/06/06/veml7700-photographic-lightmeter/ Dis/Assembly Video Why would you make this? If you have old manual SLR or TLR cameras with no built-in light meter (or a non-functional…
Druck in TPU / weich, 0.16 Layer Höhe. Beim Drucken das kleine Teil zuerst drucken, dann beim großen Teil bei Höhe 5,3 mm pausieren und das kleine einfügen. Dadurch kein Support nötig :-)
I designed larger feet because the feet of the original step always press into the floor if the ground is too soft. I hope someone can use it... I printed it with the settings in the 3mf. Works great. A little superglue when assembling…
I made the model based on the dimensions of the surviving part from my car, with as much accuracy as I could
Originally published here: Motorola Moto E4 Plus xt1770 case by tato_713 - Thingiverse Some of the models are designed for rigid materials and others for flexible ones. The models materials are not interchangeable , so pay attention to…
This is the case that use to be for the battery pack in your cordless blender 7700, you can use a 12V AC-DC adapter from any led lights or something else, and then get a buck DC-DC converter from 12v to 7.2V, be sure to use thin wires as…
One year ago my Lagoon headset broke at the frame. Thus i looked on the Beyerdynamic website for spares but they had no new frame for these headpones. So i repaired them with a 3d printed bracket wich worked just fine until the other side…
Evitar males maiores como riscos e mossas Já algum tempo que estava para fazer esta peça, agora partilho com vocês. também deve ser possível imprimir em fila-flex ou ninja-flex É possível fazer para outros modelos. Quem quiser que entre…
This Menorah is a usable replica of the one used every Chanukah in 770 which is based of the Menorah used in the Beis Hamikdash. The holes are designed for oil cups NOT CANDLES, and the holes are 10mm in diameter and 11mm deep. the hole…
Simple mount for ThinkCentre M770q
Printing Just print them outside-down. The screw counterbores shouldn't need supports, most modern slicers can automatically bridge the inside. This image is looking up from below the build plate to show the bridges in the counterbore. I…
This is a replacement slider mechanism for Beyerdynamic DT 770/880/990 headphones. You will want to print them with the flat side facing down. I printed mine with 3 walls, 25% gyroid infill, NO supports, and a 0.12 layer height. I…
This is a basic mounting bracket for different occasions with a tight fit. Feel free to add this piece to other projects you want to mount to your headphones. The headphones don't touch/scratch the bracket while moving or stretching them.…
Press fit stand for the Lexivon LX-770. It can be removed for storage. Stand is flat enough to fit into the transport case of the soldering iron. PLA, 0.2mm layer height
Fits really well, thanks havunome did a great job.
It's designed to fit m2 bolts into m2 heat-insert nuts fitted in the top part, so 6 m2x6 bolts are needed for the casing and another m2x4 + whaser to hold the circuit in place. For the display 2 small screws were used. For the clips two…
Multiple mods exist for the DT770 PRO headphone. So, I made this jig to be able to drill holes accurately in multiple enclosures. Also useful for balance mod where you need to drill both enclosures of the headphone. The jig is parametric,…
This case can hold AHT10 sensor and the VMEL7700 light sensor. Connect it to ESPhome and a use it in my grow tent. Print with no supports. Lid and Body fits well.
This part was designed to interface with an Actobotics D-Hub and FTC motor (0.770" hole pattern, 6 mm D-Shaft) to spool out and retract a line for a linear slide mechanism. This part was modelled by EMK of FTC team 14273, Sense and Sound…
Griff für den Laubsammelbehälter der Kehrmaschine Stihl KGA 770. Gibt es nicht einzeln, nur den gesamten Behälter. Vorne habe ich zwei Löcher gelassen, dort kann 2mm Stahldraht o.ä. reinkleben, damit es stabiler ist. Zum reinpressen in…
The starter pull start pulley on my Ryobi Whipper snipper lost the teeth. Designed in Fusion 360, printed in PETG. Update the PETG sheared off the teeth pretty quickly. I printed it again in 90 hardness TPU and it seems to be better. I…
Versions Two versions of the internal driver support ring are available. One is the standard stock ring as a replacement part. The other is modified with and additional cut-out, this allows it to be used when modifying the DT770s to have…
Anilha adatadora para pedaleira MT770 para converter 3 pratos em 2 Se imprimir este objeto, por favor partilhe a sua impressão 3D http://www.thingiverse.com/thing:1157690/add_instance Versão V3 para parafusos de já de 2 pratos mais fino…
Exhalation filter designed to directly attach the exhalation port on the Honewell 7700 series respirator. I designed this to be used in the healthcare setting as healthcare workers using half-mask respirators. This will help trap any…
I made these headphones for fun. They are based off of the Beyerdynamic DT 770 Pros.
Simple mount that attached to the headphone strap cushion. Holds a bluetooth receiver. Should also be compatible to BeyerDynamic DT770 DT880 DT990 and possibly others. For more see https://xythobuz.de/2021_09_05_dt770_xlr_mod.html Update…
Did your On Stage MS7700B Tripod Microphone Stand tensioning ring shatter into a thousand pieces? Fret no more, print this piece in TPU, and you will have a piece that will allow you to adjust the height of your mic stand and also last…
A precision, two-piece, 100% support-free snap-fit enclosure engineered for a high-performance ESPHome / Home Assistant multi-sensor. It houses an ESP32-C3 SuperMini, an SHT41 temperature/humidity sensor, a VEML7700 ambient light (lux)…
Dremel 7700 Battery Pack Charge Dock. To be used with a NiMh 6S intelligent charger. I upgraded the worn AA 0.7A NiCd cells in the original battery pack to AA 2.6Ah NiMh cells. There are 6 cells in the battery pack and after upgrading I…
This is a modern wall decoration made of two colors. infill: 15% layer height: 0.2 wall generator: Arachne If you like my uploaded model, please take a look at my other wo
Secures the other end of the GPU. BOM: 3x M3x6 Countersunk Screws 1x M3x12 Button Head Screw 1x M3 3x5x4 Heat set Insert (Unused) 2x M3 3x5x4 Heat set Insert for future proofing, in case it wasn't stable enough and needed supporting from…
A tallit holding clip that will not fall with a print of a print of the House of Rabbi Yosef Yitzchak Schneerson - Chabad World Center - 770. I did not print it. I would increase the infill to 25% because this is a small product that…
Laptop and portable-monitor vertical stand
Do this at your own risk!! Did your DT770s break after the warranty expired, and you don't want to pay for the OEM speaker assembly? That happened to me… I thus came up with the idea to use a pair of mini speakers I had lying around to…
I love my headphones and modified my Beyerdynamic DT 770 Pros to have a 3.5" headphone jack. However having them more mobile was always a wish. This is what this model is supposed to fix. I replaced the original headphone cable on the…
Best printed with the bottom side down, using tree support just for the teeth.
Epson G6770/ 6750 Standard Lens Cover
Honey jar lid for EU (Czech) honey jar, 770 ml (1 kg). Designed with a 15mm cutout for a dripper or spoon. There is simple lid, lid with “MED” or “HONEY” text on the top. It work fot this jars: (link) . Printed with PETG, 0,15mm, 3…
I made this because I was in search of a sleek solution for wiring up an oven with false plug protection within the Reflex SI series. Sadly, there are none (even without false plug protection or any plugs at all for that matter), so I had…
mirror the STL to get 7700848790
Aston Martin DBS 770 Ultimate as a 3D Model. This design can be scaled to any size in your slicer. Print flat with ~5% infill to save material. Perfect as decoration. Category: Signs & Logos
Rastfeder für: Stihl Artikel Nummer 4860 731 9401 Starmix/Haaga Artikel Nummer 600712 Der Stihl KGA 770 ist fast baugleich mit dem Starmix/Haaga Kehrmaschinen, sollte also auch dort passen. Ich habe meine mit PETG ohne Stützen massiv…
Don't throw the mixer away if you have a broken lid. Print a new one!
Renault Megane MK3 Sunroof Slider Repair Clip / Vibration Damper (TPU) This is a custom-designed replacement for the sunroof slider clip on the Renault Megane III (all body styles with a panoramic roof). The original plastic clips are…
Needed a very “quick and dirty” Adafruit VEML 7700 holder for my Q80+ Grow tent and did a remix. It works but there is room for improvement.
AMD Radeon RX 7700XT PCI/PCI-E Slot Cover
Xray Gendex gx770 power switch bracket, first bracket does fit but needed 2 nuts to take up space between outer cover. Modified to take up the space and moved square switch hole to be more Centre.(few mm)
Print one V-Boom Clip right or left side. Tested on DT990 Pro. For this project, you will need: 1x V-MODA BoomPro Microphone Detachable Flexible Boom Microphone for Headphones 2x M3x8mm Socket Head Screws 2x M3 Washers
I printed out of PETG though PLA should work. It prints with out supports if placed in the way that minimizes overhangs press lay flat in slicer or just eye ball it. Honestly most people will just 3d print organizers but these are about…
I needed to install this silly Asrock Arc A770 into my main CAD workstation as I repurposed my RX 7900 into my open source gaming console. The Asrock card is as ugly as hat full backsides, so I thought I would try and improve it to match…
Replacement for the clip that holds the lid shut on the Bixolon printer. Left side only, but the STEP file is provided if you need to mirror it and create the right side.
This is a simple holder to store three IKEA cork pot stands (19 cm, item number 87077700) under a table or desk. It saves space and keeps the pot stands easy to reach. Mount it with 3 mm screws (2–3 cm long). Print Settings: Print with…
Fit a circular polarising lens filter to your Thinkware F770 Dash Cam. There are 2 versions: – Generic 24mm CPL – Plenty of these on eBay and very cheap. Remove the adhesive magnetic ring before fitting. Filter has a thread for adjustment…
A filing jig for use with Calrad 30-711 3.5mm TRS chassis mount snap-in Jacks
