P
Printablesthall72
Lego Compatible (2780.dat) Technic Pin with Friction and Slots
This model is compatible with the lego system.
- Downloads
- 3,007
- Likes
- 211
- Rating
- 5
Search results: 780
Counting matching models…
P
PrintablesMarky
DeWalt DWS 780 Zero Clearance Insert
Zero Clearance insert for DeWalt DWS 780 miter saw. I printed it in PLA+ with 80%+ infill. If you have smaller printer like me (Bambu X1C), insert can be cut in half with Plug connectors (4mm in diameter, 8mm deep). I recommend use 0.20…
- Downloads
- 710
- Likes
- 68
- Rating
- 0
P
Printablesmshipman
Cisco 7800 7841 IP Phone Wall Mount Bracket
The official Cisco part for wall-mounting 7800-series IP phones has been getting increasingly scarce and expensive as of late, so I set out to make a 3D-printed alternative for use at work. Additional Materials Needed: - 2x M3x6 machine…
- Downloads
- 653
- Likes
- 22
- Rating
- 5
P
PrintablesRingbaer
Knipex Cover 7803125/ 7861125
This is a small protective cover designed for the Knipex side cutter 78 03 125 (without lead catcher). When applied, the cover locks the pliers in the closed position, ensuring safety and convenience during storage or transport. Printing…
- Downloads
- 270
- Likes
- 51
- Rating
- 5
P
PrintablesJW
Medtronic 780G holder
Special design to replace the clip for the 780G easy placing on the side of a trouser border. Best material to use is CPE of PC
- Downloads
- 247
- Likes
- 15
- Rating
- 0
P
PrintablesinfiniteWays
Logitech K780 Multi-Device Keyboard - Battery Cover
This is a replacement for the cheap battery cover of the Logitech K780 keyboard. It's quick and dirty and far from perfect, but it does the job :)
- Downloads
- 230
- Likes
- 14
- Rating
- 4.67
P
Printablesthall72
Lego Compatible (61780.dat) Container 2 x 2 x 2 Crate
This model is compatible with the lego system.
- Downloads
- 210
- Likes
- 31
- Rating
- 0
P
PrintablesTwisted Zion
Brunost lokk (Synnøve, Fløtemysost 480g og780g)
Tight lokk til Synnøve fløtemysost, slik at den ikke tørker ut.
- Downloads
- 162
- Likes
- 7
- Rating
- 0
P
Printablestaxilian
Yaesu mounting bracket for 8800/8900/7800/7900 and others
This is a mounting bracket which fits the yaesu 8800, 8900, 7800, 7900, and probably others. When printed with ABS this is surprisingly strong (3mm walls probably help), but you will likely need longer screws than the ones you might (or…
- Downloads
- 148
- Likes
- 9
- Rating
- 0
P
PrintablesKaosuNeko
DC-DC LTC3780 module DIN rail mount
DC-DC LTC3780 module DIN rail mount Mount of excellent DC-DC sepic converter Compatibility: DC-DC LTC3780 35mm DIN rail Mounting components: M3 screws M3 stand Thanks to Joël P for making a LTC3780 model. If there are any licensing…
- Downloads
- 123
- Likes
- 26
- Rating
- 5
P
PrintablesPTZ-M
Peugeot-Citroen Mousse d Etancheite Collect Rh 9676168780
Hood seal / Windscreen support. The insert needs to be adjusted with a knife!
- Downloads
- 119
- Likes
- 16
- Rating
- 0
P
PrintablesJuansr87
Dewalt Dws 780 dust collector
este es mi modelo de colector de polvo basado en Fisher shop el de el es de Bosch el mío es de Dewalt en el frente se ajusta perfecto después de 8 pruebas con corte de laser y no necesita hardware adicional para anclarse de usan las…
- Downloads
- 118
- Likes
- 14
- Rating
- 0
P
PrintablesDigitalArk
DeWalt TSTAK Deep Box (DWST17806) Gridfinity Base
Custom Gridfinity base perfectly fits DeWalt TSTAK Deep Box (DWST17806). Prints in 7 smaller parts to fit smaller printers. Base accepts magnets for extra stability if desired. Stash taller parts in irregular spaces between gridfinity…
- Downloads
- 100
- Likes
- 20
- Rating
- 0
P
PrintablesBlack-Villain
Poulan/Husqvarna Fuel Tank Grommet (574678001)
Print in TPU or similar for flexibility and fuel resistance, also recommend using some gasket maker/RTV to be safe.
- Downloads
- 100
- Likes
- 8
- Rating
- 5
P
Printablescsmorphew
Adaptex ASR-7805 40mm fan mount
40mm Fan mount for Adaptex ASR-7805. Card is recommended in NAS Killer 6.0 build guide from serverbuilds.com. The HBA needs a cooling fan and this will mount a 40mm fan to the heatsink.
- Downloads
- 93
- Likes
- 6
- Rating
- 0
P
PrintablesStawiamKlocki.pl
HP Workstation DC7900 DC7800 8000 8100 Z400 Z600 HDD Disk 3,5" Brackets Screw
You lost your HP workstation mounting screws? Just print 4 of these :D It's not perfect, but it works :)
- Downloads
- 83
- Likes
- 8
- Rating
- 0
P
PrintablesBouli
Skadis Knipex Snipper 7803125
I made a remix of the Skadis Knipex Snipper for 2 to just hold 1 7803125 snipper.
- Downloads
- 83
- Likes
- 13
- Rating
- 0
P
PrintablesChris Giesen
t-stack / CMST17804 VERSASTACK Double Shallow Drawers metric wrench holder
it takes about 42 hours to print on my ender5 plus at 10% infill you will need to cut it in parts for smaller printers
- Downloads
- 77
- Likes
- 18
- Rating
- 0
P
PrintablesDragonwizord92
Minisforum EM680 / EM780 Reference model
Simple reference model I took from the website Everything is based off of the a picture and scaled to the size of the USB port From Minisforum Website It's not good enough for a clearance fit But it will get you in the ballpark
- Downloads
- 76
- Likes
- 3
- Rating
- 0
P
Printablessftblw
Gridfinity magnet base plate for DeWALT T-STACK with 2-Shallow Drawers (DWST17804)
Gridfinity Magnet Baseplate for DeWALT T-Stack with 2-Shallow Drawers (DWST17804). Designed to fit in the guardrail slots of dividers. It was created with Gridfinity Workbench, which is a FreeCAD addon. Then, I added holes to fit the…
- Downloads
- 72
- Likes
- 17
- Rating
- 5
P
PrintablesZachW
Atari 2600/7800 dust cover
Protect your console cart port from dust ect. Use supports, obviously. I do 3 walls minimum on all prints. 15% Infill.
- Downloads
- 66
- Likes
- 3
- Rating
- 0
P
PrintablesDa9L
Minisforum UM780 XTX Wallmount
This simple print will let you mount your UM780 XTX to a wall etc. It is open where needed for ports and vents I've printed mine in PETG, 0,2mm Quality preset. 4mm holes, 69mm apart Unlike my previous model for UM690, I've made this model…
- Downloads
- 65
- Likes
- 5
- Rating
- 0
P
PrintablesDa9L
Minisforum UM780 XTX LED plate
The plate is 1 mm thick, which is a bit more than the sheet that comes with the computer, but it fits nicely. I printed mine at 0.2 mm and used some black PLA Unlike the original i haven't added any adhesive to hold the plate as its hold…
- Downloads
- 64
- Likes
- 4
- Rating
- 0
P
PrintablesPurchenZuPoden
DC-DC LTC3780 MODULE SELF-ADHESIVE MOUNT
This is a LTC3780 DC-DC Converter PCB SELF-ADHESIVE MOUNT. KaosuNeko , thank you very much for the orignal design!
- Downloads
- 63
- Likes
- 4
- Rating
- 0
P
PrintablesKyson
missing part 99780
Print 2x 99780 in grey as per the original models parts list. Double check the scale relative to the original pieces to ensure fit.
- Downloads
- 57
- Likes
- 5
- Rating
- 0
P
PrintablesBertmag
GeForce GTX 780 Ti Backplate (also 980, Titan, etc)
I was getting frustrated that I couldn't find a backplate for my 5 year old video card, so I said to hell with it and made my own. I made this for my EVGA 780 Ti video card, but this ought to work with the 780, 980/980 Ti, and Titan…
- Downloads
- 51
- Likes
- 1
- Rating
- 0
P
PrintablesDesignCraft
Ford Cup Holder Panel Mat - 1L2Z-78046B76-AAA
This cup holder panel mat was designed based on Ford part number 1L2Z-78046B76-AAA and should be compatible with the following vehicle models: Ford Edge: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014 Lincoln MKX: 2007, 2008, 2009, 2010…
- Downloads
- 48
- Likes
- 5
- Rating
- 0
P
PrintablesOldManHomer
HP 578006-001 Tool-less Drive Caddy
HP 800 G1, 8000, 8100, 8200, 8300, Ultra Slim USDT Hard Drive Caddy Tool-less Category: Parts
- Downloads
- 46
- Likes
- 2
- Rating
- 0
P
PrintablesLukas Tichy
Bruder Lexion780 rear axle
Spare parts forl Lexion780TT. My printed setting: Material: ASA Layer Height: 0.2 Infill: 40% Wall count: 4 Solid top/bottom layers: 5 Need support for print. Postproces - glue two pins to bottom.
- Downloads
- 46
- Likes
- 2
- Rating
- 0
P
Printables16 Bit Virtual Studios
Atari 2600/7800 Cartridge Display Stands
To assemble you will need to print our nut hammer and 4, 10x32 nuts and ½" screws If you don't have a 3D Printer I can make it for you from my stores on eBay and etsy etsy - http://www.16bitgamestore.etsy.com/ eBay -…
- Downloads
- 45
- Likes
- 6
- Rating
- 0
P
PrintablesSoren
G.SKILL Ripjaws KM780 Feet replacment keyboard feet
Standing feet replacment for G.SKILL Ripjaws KM780
- Downloads
- 44
- Likes
- 1
- Rating
- 0
P
PrintablesMarkus Hein
XFX Speedster MERC 319 Radeon RX 7800 XT BLACK Edition Shroud Mod
Modified some files to fit the XFX Speedster MERC 319 Radeon™ RX 7800 XT BLACK Edition
- Downloads
- 43
- Likes
- 3
- Rating
- 0
P
PrintablesRetroGameRevival
Atari 7800 Modular cartridge Display stand
Files to Print Required Print the appropriate files named "[region]_Display_Bottom" for the cartridges you want to display. Then for each additional cart, you can print the files named "[region]_Extension_Cartpiece", and simply screw them…
- Downloads
- 38
- Likes
- 3
- Rating
- 0
P
Printablesnicodemus26
Dewalt DWS780 Compound Miter Vacuum Hose Adapter
I couldn't find a reasonable adapter online, so I made this one. It should be printed in place without supports using PETG in the photos. I used 30% hexagonal infill, but less might do. You may be able to increase the miter-side clamping…
- Downloads
- 35
- Likes
- 5
- Rating
- 0
P
PrintablesCaballero229
Heavy Duty Lenkstange Claas 780 Lexion Happy People
Falls eure Lenkstange auch bricht, baut diese ein. Passt ohne Modifikationen
- Downloads
- 35
- Likes
- 1
- Rating
- 0
P
PrintablesK Bogle
Stackable Atari 2600/7800 Game Storage – Support-Free Print with Dust Covers
🕹 Stackable Atari 2600/7800 Game Storage – Support-Free Print with Dust Covers Preserve your Atari legacy with this custom-designed, stackable storage solution for 2600 and 7800 cartridges. Each unit is built to hold individual games…
- Downloads
- 33
- Likes
- 8
- Rating
- 0
P
PrintablesStanley
Mini-ITX bracket for NVR board NBD7808R-PL
This is bracket for NVR board NBD7808R-PL. Thank to this bracket, NVR board can be easily installed to Mini-ITX case. Print instructions Rafts: No Supports: Yes Resolution: 0.3mm Infill: 40%
- Downloads
- 32
- Likes
- 1
- Rating
- 0
P
PrintablesMaadmatt
Atari 2600 and 7800 Cartridge and Instuctions Holder
I purchased a new Atari 2600+ Pac-Man Edition and several new games, and wanted a holder that not only stored my cartridges but also the instructions. I designed this holder to be printed on a Prusa Mini+ without supports. It is quite a…
- Downloads
- 31
- Likes
- 3
- Rating
- 0
P
PrintablesJames Green
DeWalt DWS780 Miter Saw Dust Port Adapter to DXV09P Shop Vac
I couldn’t find an STL to connect my DeWalt DWS780 miter saw to my DeWalt DXV09P shop vac, so I made one. This adapter is designed to improve dust collection and provide a snug fit between the saw and vacuum hose. It was one of my first…
- Downloads
- 30
- Likes
- 4
- Rating
- 0
P
PrintablesTBII78
Makita DRS780 Circular saw vacuum Adapter for Karcher vac hose
Vac hose adapter for Makita ripping circular saw made from TPU. Printed on 0.2 layer height with some infill. Picked TPU as it s a bit more flexible than PETG and wont let the hose go that easily.
- Downloads
- 29
- Likes
- 3
- Rating
- 0
P
PrintablesAholz
DeWalt DWS780 Unlock Pin Knob
Simple print and slide on model, better feel then factory pin. Textured grip and smoother edges. Great little upgrade for the Dws780 saw.
- Downloads
- 27
- Likes
- 6
- Rating
- 0
P
PrintablesMuszka_
mount for dell optiplex 780 usff under table
easy to print mount for dell optiplex 780 usff Print with PLA 30% gryroid infill / ABS/PET-G 25% gyroid infill (i printed it with PLA) doesn't require supports Happy Printing :)
- Downloads
- 27
- Likes
- 2
- Rating
- 0
P
Printablesarovod
PowerColor 7800 XT Fighter NF-A9x14 fan mount
Print for mounting Noctua NF-A9x14 fans (frame removed) to PowerColor 7800 XT Fighter GPU (potentially other models as well, not tested).
- Downloads
- 26
- Likes
- 1
- Rating
- 0
P
PrintablesHashtag_Francis
Portable AmpRipper 3000 7800mA LiPo Project Case
Just a little USB battery bank I drew up and 3D printed. The enclosure is designed to fit three 18350 lithium-ion cells (WIRED IN PARALLEL) and an AmpRipper 3000 v1.0 from Kickstart Design (Link below). Assembly is very easy. First, plug…
- Downloads
- 26
- Likes
- 13
- Rating
- 0
P
PrintablesMTB3D
780mm beer holder
This was a project for the course advanced prototyping at TU Delft. With the help from Joris from Protospace, we fixed two old ultimakers togheter, adjust firmware, and let them print at the same object in 1 print! Check out the…
- Downloads
- 26
- Likes
- 1
- Rating
- 0
P
Printableshjembaek
Kitchen Aid Toaster 5KTT780 Knob 4176838
This is a custom-designed replacement knob for KitchenAid toasters 5KTT780 part 4176838 . The model is designed for durability and precise fit and has been optimized for 3D printing in polycarbonate (PC) . It is intended as a functional…
- Downloads
- 25
- Likes
- 2
- Rating
- 0
P
Printablesleadinglights
Printer control panel with HD44780 display and SD card
Although there are many LCD controllers for the RepRap, there are fewer with a memory card that can easily be removed. Most of the SD adaptors are difficult to mount into a box and the micro SD format is uncomfortably small. Although the…
- Downloads
- 24
- Likes
- 0
- Rating
- 0
P
Printables16 Bit Virtual Studios
Atari 7800 Composite Mod Mount Kit MK II
This is a Mounting Kit for a 4 Pole Female 3.5mm headphone jack, to solder into a Composite Video Mod, intended to replace the Atari 7800's RF modulator. The idea is, instead of drilling holes into your 7800, you would replace the RF…
- Downloads
- 24
- Likes
- 6
- Rating
- 0
P
PrintablesSam Thomas
Window screen frame for Suncast BMS8780T garden shed
Easily add window screens to your louvered air vents to keep bugs out of your garden shed. Use PETG filament for outdoor use. No supports or brims. Print 2 frames. Apply outdoor rated 1" wide double stick tape to back side of frame. After…
- Downloads
- 22
- Likes
- 6
- Rating
- 0
P
PrintablesJA-Garcia
Atari CX-2660-7800 Acturador
Print upside up 75% Infill Supports - YES
- Downloads
- 21
- Likes
- 4
- Rating
- 0
P
PrintablesHami
Pen holder for " edding 780 "
Stifthalter für edding 780 Lackstift , oder andere Stifte mit unter 12mm Durchmesser ------------------------------------------------------------------------------------------------------ Pen holder for edding 780 , or other pens with a…
- Downloads
- 20
- Likes
- 2
- Rating
- 0
P
PrintablesIgor
LTC3780 Step Up/Down Converter Case
Simple case for a rather popular LTC3780-based board from Aliexpress e.g. this one: https://aliexpress.com/item/1005009222609081.html It features a place for a 4cm fan in the lid, though you might need a separate power source to feed it,…
- Downloads
- 20
- Likes
- 2
- Rating
- 0
P
Printablesko
Dishwasher Dishrack Roller WP99002780
Dishwasher Dishrack Roller WP99002780 Suitable for when the bracket is still ok, but the wheel has broken. Snug inner fit, consider filing inside slightly depending on your printer settings.
- Downloads
- 20
- Likes
- 0
- Rating
- 0
P
Printablestheory
BenQ EW2780 Monitor Riser
BenQ EW2780 Monitor Riser - 45mm lift
- Downloads
- 20
- Likes
- 1
- Rating
- 0
P
PrintablesDIll
Minisform EM780 Case
Work in progress. Power button needs work and I need to add a backplate
- Downloads
- 19
- Likes
- 0
- Rating
- 0
P
PrintablespepOo
MiniMed 780G Protective TPU Case — FreeCare DIA (v1 Beta)
Features - Full wrap — covers back, sides, top and bottom - Large front window — full access to the screen and the navigation buttons - Rear keyhole slot — works with the original slide-on belt clip - Top opening (Ø24 mm) — clears the…
- Downloads
- 18
- Likes
- 1
- Rating
- 0
P
PrintablesKraiden
Ayaneo Next Logitech K780 stand
A stand for the Ayaneo Next that slots into the phone/tablet stand on the Logitech K780, so you can play games that require a mouse and keyboard on the go. Works fine, just be careful when you pick the device up out of it, I somehow…
- Downloads
- 17
- Likes
- 3
- Rating
- 0
P
PrintablesAlvomane
Skid Plate compatible to Bauknecht/Whirlpool/Indesit Dishwasher, Refrigerator, Freezer (#481252878032 / #3093951) | Gleitteller für Bauknecht/Whirlpool/Indesit u.a. Hersteller
The skid plate on my Bauknecht GSXK 5020 SD dishwasher broke, so I designed a compatible replacement. Apparently these skid plates fit also refrigerators, freezers and other appliances from many companies. Print in STL orientation at 0.2…
- Downloads
- 16
- Likes
- 2
- Rating
- 0
P
PrintablesLegacy_Micro
Compaq Armada 7800 CF/HDD Adapter
Compaq Armada 7800 CF/HDD Adapter --------------------------------------------------- Adapter to fit an old hard disk to Compact Flash card. This fit the Compaq Armada models: 7700 7800
- Downloads
- 15
- Likes
- 0
- Rating
- 0
P
PrintablesFreddyZ
XFX Merc RX7800xt shroud
A simple custom fan shroud for XFX Merc Series graphics cards of the RX7000 series. Low profile, accepts any 120mm fan using M3 hardware. Uses M3 threaded inserts (d=~4,2mm, L<7mm). Includes optional flexible exhaust duct (soft TPU).…
- Downloads
- 14
- Likes
- 1
- Rating
- 0
P
Printablesjon
Radeon 7800XT fan shroud adapter 120mm asrock challenger OC
This a fan shroud to replace the standard 95x10mm fans with 120x25mm ones, I used Arctic Cooling P12 PRO ones because it have a very good cost/performance ratio. The main idea it's to use their high static presure to blow aire using a fan…
- Downloads
- 14
- Likes
- 5
- Rating
- 0
P
PrintablesJurgen Van Donink
MiniMed 780G Insulin Pump Replica
This life-size, non-functional replica of the MiniMed 780G insulin pump is designed to help you make custom pouches, holders and other accessories. Most of the model was captured using a high-resolution 3D scan. The transparent reservoir…
- Downloads
- 14
- Likes
- 0
- Rating
- 0
P
PrintablesPineapple Dan
Mount kit for 80mm HD44780 2x16 character displays
Panel version is not really made to be printed seperately but incorporated into a panel/lid
- Downloads
- 14
- Likes
- 1
- Rating
- 0
P
Printables3dprintedstuff123
3M 7800 Harness Pin
Print with or without supports. Either way requires cleanup. First try was slightly long, but still fits, and is easier to reattach the strap to. Use “Short” version for tighter fit, untested. Took me 5 minutes to put together.
- Downloads
- 14
- Likes
- 3
- Rating
- 0
P
PrintablesWolfsbora
Universal game display stand - Sega Genesis/Mega Drive/SNES/Super Famicom/Game Boy/GBA/DS/3DS/Switch/Famicom/NGPC/Atari Lynx/Game Gear/Atari 2600 & 7800
This tiny cart display stand is the smallest you will find. I made sure there is just enough gap between the back rest and the lip for most cartridges. The non-card type cartridges look like they are floating due to the tiny size. The…
- Downloads
- 13
- Likes
- 3
- Rating
- 0
P
Printablescrasbe
Volvo Cover Washer and Gasket (8250235, 30751307, 9207806)
When converting a vehicle from Manual to Automatic or to Electric, the clutch master cylinder is not used anymore, leaving a hole in the firewall. Automatic cars came with a cover washer in place of the master cylinder, but it appears to…
- Downloads
- 13
- Likes
- 1
- Rating
- 0
P
Printablesstefanmader1984
Playmobil7106780 2 - 6551575
Playmobil7106780 2 - 6551575
- Downloads
- 11
- Likes
- 6
- Rating
- 5
P
PrintablesMr.Ten
NVR780 Rain Cover
Simple rain protection for your NVR780 To shape it perfectry to your wall use hair dryer or air heat gun to softern plastic. Attached to the cover via dual sided tape.
- Downloads
- 10
- Likes
- 0
- Rating
- 0
P
PrintablesREMLURELMI
Display Stand for Enovation/Murphy PowerView/HelmView 780 & 780B
Desktop stand for a PV780, or PV780B, or HV780 display. Includes holes for 8-32 mounting screws, or bezel mount. Recommended print settings: Layer Height: 0.2 mm or less Infill % : 15% Supports: No Print Orientation: Default as modeled…
- Downloads
- 9
- Likes
- 0
- Rating
- 0
P
PrintablesBlitz City DIY
NAU7802 Food Scale
Housing for the NAU7802 Food Scale project. Category: Electronics
- Downloads
- 8
- Likes
- 0
- Rating
- 0
P
PrintablesMarco87
Makita DRS 780 Adapter Absaugung
Konnte keinen passenden Adapter für meinen Staubsauger finden also habe ich diesen hier entworfen. Adaptiert von 34mm am Staubsauger auf 27,3mm an der Handkreissäge. Gedruckt in TPU 95A mit 20% Füllung.
- Downloads
- 5
- Likes
- 0
- Rating
- 0
P
PrintablesND
Unitec 577780 Mount
Print laying on it's side. Watch the correct orientation for the point of the teardrop facing upward. No supports needed. Print with 20% infill or less for a good flexibility.
- Downloads
- 3
- Likes
- 1
- Rating
- 0
P
PrintablesPreciseTinkerer
Smart scale for 5 L jugs – TAL220 + NAU7802 + XIAO ESP32-C6 (ESPHome)
A compact WiFi scale that sits under a 5 L jug and tells Home Assistant how much liquid is left, in grams and in litres. I built five of them for the nutrient jugs (Micro / Grow / Bloom / pH Down / pH Up) of my hydroponic dosing station,…
- Downloads
- 3
- Likes
- 1
- Rating
- 0
P
PrintablesMarkPk
Drill adapter for Bruder Combine harvester Claas Lexion 780 Terra Trac
Drill adapter for Bruder Combine harvester Claas Lexion 780 Terra Trac
- Downloads
- 2
- Likes
- 0
- Rating
- 0
P
PrintablesPreciseTinkerer
Smart scale with e-paper display for 5 L jugs – TAL220 + NAU7802 + XIAO ESP32-C6 (ESPHome)
WiFi scale that sits under a 5 L jug and shows the litres left on a 2.13" e-paper display, while sending mass and volume to Home Assistant. The display version of my nutrient-jug scale . Running under the nutrient jugs of my hydroponic…
- Downloads
- 2
- Likes
- 0
- Rating
- 0
P
PrintablesVilecribe
Ski-doo 572278000 leaf sring bushing inner OEM
I print them in TPU 95A at 60% infil gyroid
- Downloads
- 1
- Likes
- 0
- Rating
- 0
P
PrintablesMolGod Scientific
Benomyl 3D Molecular Model — CAS 17804-35-2
Benomyl (C14H18N4O3, CAS 17804-35-2) — a free educational 3D molecular model for teachers and students, by MolGod.org. Symbols are engraved into every atom, so students read atoms by symbol, not by colour. At its heart, Benomyl is built…
- Downloads
- 1
- Likes
- 1
- Rating
- 0
P
Printables
NVR780 Rain Cover
Simple rain protection for your NVR780 To shape it perfectry to your wall use hair dryer or air heat gun to softern plastic. Attached to the cover via dual sided tape.
P
Printables
Stackable Atari 2600/7800 Game Storage – Support-Free Print with Dust Covers
🕹 Stackable Atari 2600/7800 Game Storage – Support-Free Print with Dust Covers Preserve your Atari legacy with this custom-designed, stackable storage solution for 2600 and 7800 cartridges. Each unit is built to hold individual games…
P
Printables
Kitchen Aid Toaster 5KTT780 Knob 4176838
This is a custom-designed replacement knob for KitchenAid toasters 5KTT780 part 4176838 . The model is designed for durability and precise fit and has been optimized for 3D printing in polycarbonate (PC) . It is intended as a functional…
P
Printables
Radeon 7800XT fan shroud adapter 120mm asrock challenger OC
This a fan shroud to replace the standard 95x10mm fans with 120x25mm ones, I used Arctic Cooling P12 PRO ones because it have a very good cost/performance ratio. The main idea it's to use their high static presure to blow aire using a fan…
P
Printables
DeWalt DWS780 Miter Saw Dust Port Adapter to DXV09P Shop Vac
I couldn’t find an STL to connect my DeWalt DWS780 miter saw to my DeWalt DXV09P shop vac, so I made one. This adapter is designed to improve dust collection and provide a snug fit between the saw and vacuum hose. It was one of my first…
P
Printables
LTC3780 Step Up/Down Converter Case
Simple case for a rather popular LTC3780-based board from Aliexpress e.g. this one: https://aliexpress.com/item/1005009222609081.html It features a place for a 4cm fan in the lid, though you might need a separate power source to feed it,…
P
Printables
Minisforum UM780 XTX Wallmount
This simple print will let you mount your UM780 XTX to a wall etc. It is open where needed for ports and vents I've printed mine in PETG, 0,2mm Quality preset. 4mm holes, 69mm apart Unlike my previous model for UM690, I've made this model…
P
Printables
RCPROPLUS SupraX 7808 (S7) TPU Protection Cap
This is a RCPROPLUS SupraX 7808 (7 mm bullet, S7) Connector Protection Cap. It's designed to be printed out of TPU, and should not need supports to print, as the overhangs are all > 40 degrees.
P
Printables
Logitech K380 / K780 vertical desk stands
A vertical desk stand for Logitech K380 and K780 keyboards. These little legs don't take much room when unused, but it can free up a lot of desk space by placing the keyboard vertical. This is a remix of smogan71's “K380 wall mount for…
P
Printables
Shark SV780 Vacuum Dust Cup Release Button
Worked this up to repair a coworker's vacuum. This may work on other models of Shark vacuums, but I do not have them for testing. I printed this in both PLA and PETG and both work fine. I used 5 walls and 25% infill for added strength.
P
Printables
Logitech K780 Phone adapter
I bought a Logitech K780 keyboard and can fit most phones without a case in the slot but as soon as I put a case on my Pixel 10 pro it no longer fits. made this little adapter for a wider slot to fit my phone. It also has carve out for…
P
Printables
Lego Compatible (77808.dat) Brick 1 x 2 with Rounded Ends and Central Bars
This model is compatible with the lego system.
P
Printables
Riverbed CX780 Rack Ears
As long as you don't intend on hanging by these, they work to at least index and secure the Riverbed unit in place. In case you're not like me and have other bolts than 20mm M4-0.7 screws for your Riverbed, I've included the f3d file to…
P
Printables
Halterung für Dremel 780 / holder for Dremel 780
Haben diesen Ständer/Halter gemacht um mehr Platz auf der Arbeitsfläche zu haben. Denn stehend braucht der Dremel 780 wesentlich weniger Platz. Man muss lediglich den Aufhängbügel entfernen. Bei mir egal da ich ihn sowieso nicht hängend…
P
Printables
Phone Mount for Multiboard (Cortelco 8780)
This is just a simple phone Mount for my office phone. I know it works for the Cortelco 8780, but probably works for many others with the same distance on the keyholes.
P
Printables
LM7805 Mosfet
Created from this data sheet ( https://www.sparkfun.com/datasheets/Components/LM7805.pdf ) to be used when modeling a circuit board if needed. Category: Electronics
P
Printables
GM 7808385 Horn Contact Retainer
If you ever need to open your tilt-telescopic steering column, such as to install a new turn signal switch, you will find that this part has broken into half a dozen pieces. You can still find them on eBay and Amazon , but if you're like…
P
Printables
Pop! Compatible Backplate for thing:3127804
Makes www.thingiverse.com/thing:3127804 compatible with Pop! devices. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 200 Infill: 38 Filament: NovaMaker PLA Category: Mobile Phone
P
Printables
Lab Bench Power Supply Enclosure (LTC3780)
because I didn't find an appropriate enclosure for my PSU project, I decided to make my own. fits really nice but printing takes a while. had some issue during print with ABS warping, but finallay fixed it some ABS glue - hence the…
