P
PrintablesSergey Morozov
Waveshare ESP32-S3 7inch Capacitive Touch Display wall mount case
You shoul use a 4 M3x10 screws to secure a screen to the case.
- Downloads
- 1,571
- Likes
- 56
- Rating
- 5
Search results: 7in
Counting matching models…
P
PrintablesDavid Smith
Waveshare ESP32-S3 7inch Capacitive Touch Display - Tabletop case
The screen can be mounted using the standoffs and screws that come with the Waveshare ESP32-S3 7inch screen. Here is the link to the design in Onshape:…
- Downloads
- 767
- Likes
- 30
- Rating
- 5
P
Printables3D_Project3R
Waveshare ESP32-S3 7inch Capacitive Touch Display Case
This is a remix of https://www.printables.com/model/1030369-waveshare-esp32-s3-7inch-capacitive-touch-display. The screen can be mounted using the standoffs and screws that come with the Waveshare ESP32-S3 7inch screen. There is a cutout…
- Downloads
- 686
- Likes
- 23
- Rating
- 0
P
PrintablesJLeyva
BMD 7inch video assist stand
A tabletop stand for the 7 inch models of the blackmagic video assist monitors, both 3G and 12G versions
- Downloads
- 494
- Likes
- 30
- Rating
- 4
P
Printableshackerbijay
Display mount (Cover)7inch HDMI LCD , 1024x600
7inch HDMI LCD (H), 1024x600, IPS, supports various systems, capacitive touch, supports Raspberry Pi 4. looks good and protected. Display link to Buy:…
- Downloads
- 488
- Likes
- 30
- Rating
- 4.75
P
Printableseponra
Small Mini Sanding Block - chamfered and 0.67in / 17mm wide
Another Remix, just because one of the standard sizes in germany for sandpaper (230mm x 96mm) lets me cut 2 sandpaperstrips out of it, but lets me with one strip of 230mm x ~16mm left. And so i decided to make a shortcut version of this…
- Downloads
- 480
- Likes
- 89
- Rating
- 4.63
P
PrintablesShaggyx86
Raspberry Pi 7in Touchscreen Wall Mount
This is a wall mount for the Raspberry Pi 7" touchscreen. I originally designed this so I could replace my old alarm system panels with a central control panel for Home Assistant. It also has a DHT22 sensor so I can monitor temp/humidity…
- Downloads
- 408
- Likes
- 49
- Rating
- 5
P
PrintablesBoA
Waveshare 7inch display for RPi/RPi zero enclosure with vesa 50 or 75 mount
Waveshare 7inch display for RPi/RPi zero enclosure with VESA 50x50 mount. You will need: 8x M3x3.9x5.7 inserts (Ruthex M3) 8x M3x6 tapered screws 4x M4x5.5x4 inesrts (Ruthex M4S). For better 50x50 mount strength, mount M4 inserts from the…
- Downloads
- 353
- Likes
- 47
- Rating
- 5
P
PrintablesDaveOfTheDead
Simpsons TV / RaspberryPi case Remix 7in screen plus backlight fan and USB
Had someone ask me to build a Simpsons TV but larger than ones already online. So after some searching I found the 3.5 inch version to be best for my needs and scaled it all up to 1.712 then added some brackets to the front face to fit…
- Downloads
- 290
- Likes
- 61
- Rating
- 0
P
PrintablesoXiVanisher
Storage case and stand for 7inch HDMI screen
This storage case doubles as a stand for a Waveshare 7inch Capacitive Touch Screen LCD . 4x M3 x 8 mm socket caps screws for the main case 6x M3 x 8 mm socket caps screws for the hinges 6x M3 nuts also for the hinges The 12 optional…
- Downloads
- 246
- Likes
- 19
- Rating
- 5
P
Printablesmarkusdd
Sunton 7inch Display Housing (ESP32-8048S070) with rounded corners
Like the original, but faceplate with rounded corners and even frame width
- Downloads
- 241
- Likes
- 10
- Rating
- 0
P
PrintablesStefanN
Sunton 7inch Display Housing (ESP32-8048S070) with Stand (FreeCAD)
The original design is great, but I wanted some enhancements. Because the STL showed some faults after importing into CAD, I decided to re-draw the whole model. On the Frontframe, the mounting holes for the Sunton display got M3…
- Downloads
- 205
- Likes
- 5
- Rating
- 0
P
PrintablesMIRE
Table top housing for Waveshare ESP32-S3 7inch capacitive touch display
Table top housing for Waveshare ESP32-S3 7inch capacitive touch display https://www.amazon.de/gp/product/B0D2NMCY7K I use it for OpenHASP with Home Assistant, in this case to mainly monitor solar panel power generation, batterie and…
- Downloads
- 188
- Likes
- 15
- Rating
- 0
P
PrintablesPaulygon
(Standard) HSW Irwin Quick Grip 7in Clamp Holder x4
Whoops, printed the original before I saw the orientation of their honeycombs. I changed the hole to use SHCS instead of FHCS (counterbored hole instead of countersunk). I also added 5 mm to the length so the clamps are less likely to…
- Downloads
- 178
- Likes
- 19
- Rating
- 5
P
PrintablesJulianB
Sunton 7inch Display Housing (ESP32-8048S070)
This is a case for the Sunton 7" display [1]. I only used it for the non touch version, so i could be that it doesn't fit with the touch version of the display. You need 4xM3x8 screews and 4xM3 nuts. Just press the nuts into the Frame. It…
- Downloads
- 178
- Likes
- 8
- Rating
- 5
P
PrintablesJbcdu87
7inch Screen Casing
Basic Case for a 7inch IPS touch screen i found on amazon ( https://www.amazon.co.uk/gp/product/B07YJDSCKR/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1 ) Brand is Jun-Saxifragelec. Friend of mine bought from the same manufacturer and…
- Downloads
- 173
- Likes
- 17
- Rating
- 0
P
PrintablesFreek van der Horst
Yamaha XSR 700 7inch headlight
This is a headlight mount for the Yamaha XSR700, mine is a 2019 model. The print is made to fit the original mounting points / brackets and the original bolts. It is designed to (pressure) fit a 7 inch LED headlight. The front can be…
- Downloads
- 171
- Likes
- 28
- Rating
- 5
P
PrintablesTad
HSW Irwin Quick Grip 7in Clamp Holder x4
Printed in PLA, 0.6 nozzle, 0.3mm layer height, no supports needed. Designed for M4 Inserts in HSW. PETG not really recommended, too flexible.
- Downloads
- 162
- Likes
- 26
- Rating
- 5
P
PrintablesMatty O
Raspberry Pi 7in display Case and stand
This case is for the new Raspberry Pi 7in display Works with the recommended assembly. No need to move parts around. Simply screws to the supplied brackets on the display. The back easily clicks off to allow access to the Pi. Great for…
- Downloads
- 162
- Likes
- 29
- Rating
- 5
P
PrintablesDendy
Printable parts for GEPRC MK4 7in FPV drone frame
Frame: Mark4 7inch ( https://www.aliexpress.com/item/1005007050126436.html?spm=a2g0o.order_list.order_list_main.33.1d911802EmF5cR ) Not a add Camera system: Walksnail Moonlight 4k kit. GPS: BN-220 Stack: 4in1 ESC + F405 FC Material:…
- Downloads
- 144
- Likes
- 13
- Rating
- 0
P
PrintablesDee
BMD 7inch video assist stand
Update: Have tested it and found a few parts are not strong enough - redesigned slightly and changed the orientation of the print to solidify it more.
- Downloads
- 135
- Likes
- 12
- Rating
- 0
P
PrintablesKyle3909
Simple 7in Diameter Plant Trellis
This is a simple 7in diameter and .2in plant trellis. Works great with Hoya plants but will also work with other plants.
- Downloads
- 132
- Likes
- 17
- Rating
- 5
P
PrintablesMatt - GlitchTech
Raspberry Pi 7in Touchscreen Enclosure
Turn your Raspberry Pi 2 and Raspberry Pi 7" Touchscreen into a completely custom tablet. This design is still a work in progress. Cable lengths and required hardware have not been tested/determined. Work is still on going to find a…
- Downloads
- 129
- Likes
- 19
- Rating
- 0
P
PrintablesJonathan Senkerik
ESP32-C6 1.47inch Display Enclosure
The Waveshare ESP32-C6-LCD-1.47-M (ESP32-C6 1.47inch Display) is a really cool easy to use iot device. This basic enclosure lets you place it just about anywhere. I printed it in white PLA so the multicolor LED under the display really…
- Downloads
- 115
- Likes
- 9
- Rating
- 0
P
Printablesideat0m
Reel2Reel empty spool 7inch / 18cm, aka AKAI - AMS
This is a cosmetic! Replica. This is an empty spool for tape recorders (reel2reel). With the possibility of being mounted on a running board with a "NAB" and a diameter of 18 cm. I would like to point out that this is a cosmetic issue,…
- Downloads
- 111
- Likes
- 8
- Rating
- 0
P
PrintablesRoart
7in Bowens Reflector with Diffuser and Grid
7 inch ABS/ASA is ideal for constant lighting PLA and PETG will work fine for strobes Diffusers can be printed in White, or ANY color! Grids best printed in Black Reflector best printed in black and painted white, gold or chrome inside!…
- Downloads
- 109
- Likes
- 15
- Rating
- 0
P
PrintablesMakerJim
Case for ESP32-C6 1.47inch Board
A tight fitting case for the Waveshare ESP32-C6 1.47inch Display Development Board, 172×320, 262K Color, 160MHz Running Frequency Single-Core Processor (Amazon 2025/12). Every case I found that matched this description was way too long…
- Downloads
- 107
- Likes
- 8
- Rating
- 0
P
PrintablesAdam
Pegboard mount for 7in/180mm Knipex Pliers Wrench 86 03 180 - Magnetic
Use 3x6mm magnets. The hexagons holes allow you to get them out easier if absolutely needed. But you do need to hammer/press them in. No glue needed. Printing You do not need supports for the hexagon hones, this was able to be printed…
- Downloads
- 106
- Likes
- 12
- Rating
- 5
P
PrintablesWhatWouldAnEngineerDo
Cases kit for Geekpi 7inch Portable Screen V2 (52Pi EP-0186) with attached Pi3b+ or Pi4b
I carelessly printed and struggled to fit the display case that I have remixed here, not noticing until I had ripped the OSD rocker switch off, that my display was not the one for which that case was designed. I therefore had to model…
- Downloads
- 102
- Likes
- 10
- Rating
- 0
P
PrintablesMegaCadler
Case for Raspberry Pi with 7inch HDMI Display
A case for Raspberry Pi with 7" 800x480 LCD and HDMI cable. The viewing angle can be changed with the back stand. Holes on the back side provide cooling air as well as access to Raspi Pins and SD card. The side cap can be removed to plug…
- Downloads
- 94
- Likes
- 8
- Rating
- 0
P
PrintablesSunny Galli
Geeekpi 7in HDMI Touchscreen
This is a case and stand for the geeekpi 7in HDMI display. It sits at a 45 degree angle. Two model available, one that uses a 2mm heat set insert, the other for 2.5mm self tapping, to mount a pi to the back off the display. Feet Screws-…
- Downloads
- 87
- Likes
- 5
- Rating
- 0
P
Printablesthemasterofunlocking
Santoku Knife Sheath (7in / 178mm blade or slightly larger)
Yeehaw, a knife sheath for your fancy knives. I went three years just wrapping my ole reliable santoku in a towel and some rubber bands. I think it's time for an upgrade. This project requires: [7x] m3x5x4 heatset inserts [voron spec]…
- Downloads
- 83
- Likes
- 16
- Rating
- 0
P
PrintablesSchandi
Remix for Waveshare 7inch Display
Casebody for Waveshare 7 inch Display. https://www.waveshare.com/wiki/7inch_HDMI_LCD_(C) Only small changes to fit the different Positions of OnOff switch, HDMI Port and a bit space for the electronic on the rear side.
- Downloads
- 80
- Likes
- 9
- Rating
- 0
P
Printablesamckimmey
Welding Cylinder Spacer with rod holders- 7in 80/125/150 cuft
Welding Cylinder Spacer with rod holders- 7in 80/125/150 cuft I bought from Harbor Freight the Chicago Electric 100 lb. Capacity Welding Cart, simple cart, but wanted to stabilize and space out my welding gas cylinder. I designed this to…
- Downloads
- 79
- Likes
- 26
- Rating
- 0
P
Printablesinvictus0x0
10 inch Rack frame for 7in touch screen
This is 10 inch Rack frame to mount the cheap 7in touch screen from AliExpress. the ones like these, https://www.aliexpress.us/item/3256807246146590.html lcd is attached with m3 screw directly into the plastic. there are two versions…
- Downloads
- 76
- Likes
- 7
- Rating
- 0
P
Printablesideat0m
Reel2Reel empty spool 7in/18cm NAB - aka Sony -AMS
This is a cosmetic! Replica. This is an empty spool for tape recorders (reel2reel). With the possibility of being mounted on a running board with a "NAB" and a diameter of 18 cm. I would like to point out that this is a cosmetic issue,…
- Downloads
- 74
- Likes
- 6
- Rating
- 0
P
Printablesideat0m
Reel2Reel empty spool 7inch / 18cm, aka Pioneer - Multicolor - for NAB
This is a cosmetic! Replica. This is an empty spool for tape recorders (reel2reel). With the possibility of being mounted on a running board with a "NAB" and a diameter of 18 cm. I would like to point out that this is a cosmetic issue,…
- Downloads
- 73
- Likes
- 9
- Rating
- 0
P
PrintablesRoart
7in bowens Lantern
7 inch ABS/ASA is ideal for constant lighting PLA and PETG will work fine for strobes Lanterns can be printed in White, or ANY color! Settings Lanterns - 2 walls 10% infill
- Downloads
- 69
- Likes
- 15
- Rating
- 5
P
PrintablesDendy
Source One V6 7in DC STEP file
STEP model based on official drawing. Download official printable parts from: https://github.com/tbs-trappy/source_one
- Downloads
- 69
- Likes
- 1
- Rating
- 0
P
Printableszane beck
7in klipper screen case
here is a case and mount for a 7 in display for klipper screen. it comes in 2 options. 1 is a vertical case and one is a horizontal case or vise verse if you want to mount on top or bottom. i made it so it can be mounted anywhere on the…
- Downloads
- 66
- Likes
- 15
- Rating
- 0
P
PrintablesNicerdicer
open case with stand for 7inch display raspberry pi 4
I was looking for a more stable stand for my Raspberry 4, which is connected directly to the 7 inch WIMAXIT screen. Unfortunately, I couldn't find exactly what I wanted, so I modeled a suitable stand myself. The stand is an addition to…
- Downloads
- 64
- Likes
- 11
- Rating
- 0
P
PrintablesActoreX
Mark4 7inch Clone DJI O4 Lite Camera Holder
Created camera holder for DJI O4 Air Unit (lite). I used spare silicon inserts (from Volador VX35 build) - you can print 2x bumpers as substitution (scale it accordingly in a slicer) and print it with soft material like TPU. I used 4x…
- Downloads
- 63
- Likes
- 2
- Rating
- 0
P
PrintablesLow-Z
18cm/7inch audio tape reel mmu or single color print created in OpenSCAD
This is my try to create 18cm/7inch audio tape reels. There are stl-files attache for different designs (0,2,7). The 3mf-files are a selection of designs i put together on two print plates each. If you want to print the non preconverted…
- Downloads
- 62
- Likes
- 6
- Rating
- 0
P
PrintablesMakealot
Kids 7in Bongo Drum
This is a simple 7in bongo drum with a 0.8 mm thick drum surface. Print upside down at 0.2mm layer height with 4 bottom layers to have a solid drum surface. The rest can be printed at whatever infill density desired. Enjoy!
- Downloads
- 60
- Likes
- 6
- Rating
- 5
P
Printablestomk0014
Raspberry Pi 4 with a 7inch touchscreen
A basic cover + case design for a 7inch touchscreen from FreeNove with a Raspberry Pi 4. Requires 4 long screws at each corner to secure the cover to the case. I made some holes in the case so that you can pass some cables through it to…
- Downloads
- 60
- Likes
- 2
- Rating
- 0
P
Printableshesselharmsen
Display Holder for 7inch HDMI-display
This 7inch Display Holder is for the very popular Hosyond 7inch display, especially made for the Raspberry PI. I used this for adding an additional display in one of our Photobooth products. The display is placed in the side of an old 60s…
- Downloads
- 60
- Likes
- 3
- Rating
- 0
P
Printablesideat0m
Reel2Reel empty spool 7inch / 18cm, aka Pioneer - Multicolor - for Trident
This is a cosmetic! Replica. This is an empty spool for tape recorders (reel2reel). With the possibility of being mounted on a running board with a "Trident or a Star" and a diameter of 18 cm. I would like to point out that this is a…
- Downloads
- 59
- Likes
- 7
- Rating
- 0
P
Printablesjambeers
Pivoting Raspberry Pi 7inch Screen Mount
Simple pivoting mount for the offical 7inch raspberry pi touch screen [https://www.raspberrypi.com/products/raspberry-pi-touch-display/]. Perfect for your klipper screen UI or other pi projects. Pivot mount designed to fit on the leg of…
- Downloads
- 57
- Likes
- 5
- Rating
- 0
P
PrintablesMiniPrinter
Wall Display / Case for Raspberry Pi with 7inch display
Case for a Raspberry Pi with the original 7inch display. Can be wall mounted or stand on a desk. I used https://www.printables.com/model/727545-raspberry-pi-4/files to model the case around it. Thank you @print_byte for providing the step…
- Downloads
- 56
- Likes
- 14
- Rating
- 5
P
PrintablesNick Sparrow
7inch Monitor Arm Desk Clamp
Found myself working on quite a few SBCs recently and instead of having to pull out a monitor every time I wanted to take a look at what the machine was outputting, figured I'd mount a small monitor to my desk. However, after some…
- Downloads
- 56
- Likes
- 10
- Rating
- 0
P
PrintablesMupshot
tbs sourceone 7in.V3 2.4. (ELRS, Ghost etc) antenna mount
T antenna holder for any 2.4gh control link. This will fit any frame with 30mm standoffs, but specifically made to fit the source one 7inch V3 frame. March 28 update: 6mm standoff version added
- Downloads
- 52
- Likes
- 5
- Rating
- 0
P
Printableseyefly
Tubular 7inch frame - superlight and superstiff - no CNC needed
Update 03.05.22: I beefed up the clamps a bit, so they are more rigid (parts 01-04). Rest has not changed. Note: This frame is work-in-progress. While the basic principle has proven to work perfectly, the "official" 7" version i'm still…
- Downloads
- 48
- Likes
- 6
- Rating
- 0
P
PrintablesJohnMartin
HSW - QUINN 7in. Self Adjusting Pliers (Harbor Freight)
Honeycomb wall holder for QUINN 7in. Self Adjusting Pliers
- Downloads
- 47
- Likes
- 11
- Rating
- 5
P
PrintablesRISMcz
laptop cooler 17inch 120mm fan
Laptop cooler 17 inch, in the back is room for 3x 120x25 mm fan There is room for some foam to seal the air to go trough the laptop and not around that will improve performance Now it is ready to print. I will be posting cooler for 16inch…
- Downloads
- 47
- Likes
- 11
- Rating
- 0
P
PrintablesPackalak
Revolver Stand for 7in revolver
It's a simple build. Use supports and at least 30% infill to ensure the integrity of the structure. Keep in a safe place. This is a presentation stand for a secure area. Don't print this and expect it to keep your revolver secure.
- Downloads
- 44
- Likes
- 4
- Rating
- 0
P
Printablesjimmyapage
27inch MTB Wheel Wall Mount
Simple bracket to mount MTB wheel to garage wall, radius to match wheel and sized to go between spokes
- Downloads
- 43
- Likes
- 8
- Rating
- 0
P
Printableskyleireland
Raspberry Pi Touch Display 7inch - Small Stand for Raspberry Pi - 40mm Fan Mount - Display Shell
I needed a Shell/Stand for the Raspberry Pi Touch Display so I decided to make this on Fusion360. This stand fits the Raspberry Pi 3 or Raspberry Pi 4 as they have the same mounting holes. You use the screws included with the Raspberry Pi…
- Downloads
- 39
- Likes
- 8
- Rating
- 0
P
PrintablesMariusz Waśkowiec
Raspberry Pi Zero Waveshare 7inch LCD case
Weather station source code: https://github.com/marwask/weather-station
- Downloads
- 38
- Likes
- 12
- Rating
- 0
P
Printablessolaris2k
Jun-Electron 7inch Touch Display Stand
I made a basic stand for the Jun-Electron 7" Touch Display that I bought on Amazon. I'm not a fan of the folio case stand it comes with so this will replace it. You can use it with the screen alone with your PC or whatever or attach a…
- Downloads
- 37
- Likes
- 3
- Rating
- 0
P
PrintablesLars Becker
Ikea skadis filament guidance M10 7in1
Latest Update: 13.04.2023 - filament stuck problem fixed the problem that the filament get stucked while trying to giude it through the model. About the model: This model is designed to merge seven PTFE tubes into a single tube, making it…
- Downloads
- 36
- Likes
- 11
- Rating
- 0
P
Printableswarpman
Waveshare ESP32-S3 7inch Capacitive Touch Display Case With Battery
A remix of the Waveshare ESP32-S3 7 inch Capacitive Touch Display Case but with a space in the back for a battery. Due to the space in the back for the battery the case is slightly thicker than the original. I also simply tapped the…
- Downloads
- 35
- Likes
- 1
- Rating
- 0
P
PrintablesConda
Tukkari Raspberry Pi 7inch Display mount
A simple remix of the Plate mounting bracket for 7" touchscreen case so it can be mounted on top of the Tukkari Printer enclosure. I printed it with Polyterra PLA and it works pretty good. No special settings needed.
- Downloads
- 35
- Likes
- 3
- Rating
- 0
P
PrintablesKuni
9.7inch iPad Pro Functional Stand
This is a stand that holds the screen keyboard of a iPad Pro 9.7 at a tap-friendly angle. Attach with spring-loaded pawls. And this has a mechanism to store the Apple Pencil and eject it by pressing a button. Errors in the model would be…
- Downloads
- 35
- Likes
- 8
- Rating
- 0
P
PrintablesRoart
7in Bowens Softbox with Grid and Diffuser
7 inch ABS/ASA is ideal for constant lighting PLA and PETG will work fine for strobes Diffusers can be printed in White, or ANY color! Grids best printed in Black Soft box best printed in black and painted white, gold or chrome inside!…
- Downloads
- 31
- Likes
- 3
- Rating
- 0
P
PrintablesMupshot
tbs sourceone V3 7inch GPS/VTX antennae mount
made specifically to hold the antennae for a walksnail Micro VTX, but will handle any VTX with dual antennae and a GPS 880 with Compass. This basic design works well with both the HGLRC (my default) and the RDQ 880 GPS receiver. March28…
- Downloads
- 29
- Likes
- 2
- Rating
- 0
P
Printablesordnancetech82
7in Pencil Case Retropie
This project contains 3 stl files: component base, screen bezel, and charge port bezel Photos give a rough idea of components and layout Below is a list of specific components needed to build this project Electronic components: Raspberry…
- Downloads
- 27
- Likes
- 28
- Rating
- 5
P
PrintablesMupshot
walksnail Micro camera adapter for 7in sourceone V3
crazy amount of space for an FPV camera, would easily fit a 25mm mini camera. 6mmspacing between mounting holes and meant to flex to hold tension on the camera. allows for a 30 and 45 deg up tilt. Update March 27 2023. 6mm standoff…
- Downloads
- 25
- Likes
- 1
- Rating
- 0
P
PrintablesKangarooneering
Replacement Cap for Mainstays 7in Pool Chlorinator
This is a replacement cap for the Mainstays 7in Pool Chlorinator if the clips are broken (Why are they so thin in the first place? beats me). (This cap also looks similar to a cap found on the 7in chlorinator made by U.S Pool Supply so it…
- Downloads
- 24
- Likes
- 3
- Rating
- 0
P
PrintablesHohyss
EVICIV 7inch Screen Support for Ratrig Vcore3 (or 3030 profile)
I made a support for Eviciv 7 inch screen for 3030 profile with "RatRig V-Core3" written on it. Print Settings Printer: Caribou Duet 320 Rafts: No **Supports:** No Resolution: 200 **Infill:** 15 Filament: Polymaker PETG Black Category: 3D…
- Downloads
- 23
- Likes
- 15
- Rating
- 0
P
PrintablesJeremy Black
7in Pi Touch for Pi3B+
Remixed the ports to fit a Pi 3B
- Downloads
- 23
- Likes
- 3
- Rating
- 0
P
PrintablesShadow
7inch Camera mount with G3 Instant bracket
Did a remix and added a built in G3 instant camera mount. requires support
- Downloads
- 23
- Likes
- 6
- Rating
- 0
P
PrintablesSte
Gehäuse für Waveshare 7inch Display und Raspi - Housing for Waveshare 7inch Display and Raspi
Das Gehäuse ist sehr kompakt konstruiert. Damit die Kabel zwischen Pi und Display montiert werden können, sind zwingend Winkelstecker erforderlich. Für HDMI die Waveshare Adapter verwenden, für USB habe ich einen 180 Grad Adapter…
- Downloads
- 21
- Likes
- 1
- Rating
- 0
P
PrintablesZ122
Remix of "Back.stl" from "Raspberry Pi 7in display Case and stand" by Bigfella
Remix of "Back .stl" file from the wonderfull "Raspberry Pi 7in display Case and stand" by Bigfella: http://www.thingiverse.com/thing:1413527 Just added a Raspi Logo and a slot for the wire of the Picam. Printed with a Dagoma Discovery…
- Downloads
- 21
- Likes
- 1
- Rating
- 0
P
PrintablesLeHa Design
Vase Sophie – Elegance in Every Curve 18cm/7in
Sophie – Elegance in Every Curve Transform your space with Sophie – a beautifully designed straight ribbed vase that combines functionality and style. Optimized for quick and easy 3D printing, this model is perfect for showcasing your…
- Downloads
- 20
- Likes
- 1
- Rating
- 0
P
PrintablesAmpedFab
Napkin Holder 7x7in
This model is great for just a quick napkin holder but can be edited to add your wall designs. With it printing flat it makes it easy for intricate designs on the side with no supports. It does take a printer on the larger side. I made…
- Downloads
- 20
- Likes
- 2
- Rating
- 0
P
Printablesdisquoveri
Corner shelf - 7in/178mm radius
I saw many corner shelves but not the one I like or needed. Radius is 7in or 178mm. The holes I made are for #6 flat head screws (82 deg)
- Downloads
- 19
- Likes
- 3
- Rating
- 0
P
PrintablesMatiasV
SourceOne v3 DeadCat 7inch - feet/Arm Protection
I did not find any feet for the SourceOne DeadCat version that I liked. I find that the motors screws must touch the carbon frame, If they squeeze the TPU part they come apart. So I make my own in freecad, sourcefile and step included.…
- Downloads
- 19
- Likes
- 1
- Rating
- 0
P
PrintablesChaoming Li
45 (7inch Vinyl) Adapter Holder for Turntables
I’ve designed a custom holder specifically for 7-inch vinyl record (45 RPM) adapters, inspired by the lack of a dedicated storage space for the 45 adapter on my Voxoa T80 turntable. This practical and compact solution not only securely…
- Downloads
- 18
- Likes
- 5
- Rating
- 5
P
PrintablesSkermiebroTechTips
Skystars g730l 7in fpv drone antenna mount for DJI & Caddx antennas
This model is made for the specifically for the DJI air unit antennas but should fit any other similar antennas. Let me know if you want any changes to the design send me a messag or comment and ill do my best to help you out otherwise…
- Downloads
- 18
- Likes
- 4
- Rating
- 0
P
PrintablesWhatWouldAnEngineerDo
Desktop Stand or HSW Hanger for 7inch Geeekpi Portable Display (52Pi EP-0186)
My Geeekpi display case requires at least a desktop stand, since the feet supplied with the display do not fit once the case is installed. I happen to have a section of Honeycomb Storage Wall (HSW) installed along the front of my printer…
- Downloads
- 17
- Likes
- 2
- Rating
- 0
P
Printables0x2A
0x2a's Baseframe for Waveshare's 7inch ESP32S3 Touchscreen
This Baseframe for Waveshare's "ESP32-S3-Touch-LCD-7 800x480 Pixels Rev1.2" has a tight enough fit to look good from the front but also allow for some print imperfections. Printed without supports and default settings (0.4 nose, 0.2 layer…
- Downloads
- 15
- Likes
- 1
- Rating
- 0
P
Printablesgreecher
PanelDue 7inch v2
Customized version of http://www.thingiverse.com/thing:656884 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=656884 Instructions Using the following options: SDcard = 1 RelieveOverhang = 10 DisplayType =…
- Downloads
- 15
- Likes
- 0
- Rating
- 0
P
PrintablesJohanna Rührig
Rack mountable Pi (3 + 4) case with waveshare 2.7inch support
This model contains the following features: All Ports are restricted except SD card slot and power plug. Bottom Case has lots of holes for air. Top plate is rack mountable and acts as a frame while also covering all waveshare hat buttons.…
- Downloads
- 15
- Likes
- 2
- Rating
- 0
P
PrintablesRed Comet
Waveshare ESP32-S3 7inch Case Stand
Since the Waveshare 7-inch EPS32 model I use is to display aircraft traffic near me, I needed a case to hold it and used the model that 3D_Project3R created/remixed to house it. This is a great housing except now I needed a way to display…
- Downloads
- 13
- Likes
- 0
- Rating
- 0
P
PrintablesIsaac
Neko Receiver Custom Case (7IN1 SteamVR Reciever)
Why? I bought this particular 7in1 SteamVR receiver ( https://shorturl.at/d8VOd ) with the objective of improving the RF performance of my trackers and controllers. I quickly found out that the performance was worse and that my trackers…
- Downloads
- 12
- Likes
- 2
- Rating
- 0
P
PrintablesClaireity
Thin Brackets for Raspberry Pi 7in Touchscreen Wall Mount
I shimmed the original screen attachment brackets by 2mm to allow a Waveshare 7 inch display to sit flush in the screen mount. The brackets are a touch more flexible as a result, but the display is a snug enough fit that it should have…
- Downloads
- 11
- Likes
- 2
- Rating
- 0
P
PrintablesMarkiian
Dji o4 pro unit mouth for Mark4 7inch frame
Be careful. To get the full mouth, just use the attached file and mirror it to the Z side in the slicer app.
- Downloads
- 11
- Likes
- 1
- Rating
- 0
P
Printablessqurequ
Under desk mount- Green Cell HUB USB-C 7in1 GC Connect PD 85W
Under desk mount For Green CELL HUBGC01
- Downloads
- 10
- Likes
- 1
- Rating
- 0
P
PrintablesrANDOMgUY
Junction Box – 70x70x50mm (2.76x2.76x1.97in) with 40x50mm (1.57x1.97in) Opening
This 3D printable junction box measures 70x70x50mm (2.76x2.76x1.97in) with an opening of 40x50mm (1.57x1.97in) Layer height: 0.2 mm Infill: 20% Supports: Recommended for overhangs Material: PETG recommended (more durable than PLA)
- Downloads
- 10
- Likes
- 2
- Rating
- 0
P
Printablesprintyourfix
CR-30 CR 30 PrintMill creality feet leg with 7inch screen 20x40 extrusion
If you find my work useful you can: paypal.me: https://www.paypal.com/paypalme/printyourfix Visit my website for contact form: https://printyourfix.com/ Follow me on Instagram: https://www.instagram.com/printyourfix/ Visit YT channel:…
- Downloads
- 7
- Likes
- 2
- Rating
- 0
P
PrintablesUnashamedFPV
Universal FPV Drone Mount | Pegboard & Wall (5–7in tested)
What it is A universal FPV mount, so you can mount your FPV drone to your pegboard or wall, and eventually any MOLLE surface you want! It fits a variety of FPV drones. 5–7in is what I've tested so far. Files Mount_Plate_Peg_Board +…
- Downloads
- 7
- Likes
- 0
- Rating
- 0
P
Printablesprintyourfix
Reinforced CR-30 CR 30 PrintMill creality feet leg with 7inch screen 20x40 extrusion
If you find my work useful you can: paypal.me: https://www.paypal.com/paypalme/printyourfix Visit my website for contact form: https://printyourfix.com/ Follow me on Instagram: https://www.instagram.com/printyourfix/ Visit YT channel:…
- Downloads
- 6
- Likes
- 2
- Rating
- 0
P
PrintablesThe Watercan Hobbyist
7in Desktop Goose
With the assistance of AI created my own rendering of a 7 inch desktop goose. Printed great on first run. Supports are recommended. Making 2 and doing a painting date night for me and the misses gaming desks. Sliced using orcaslicer.…
- Downloads
- 6
- Likes
- 1
- Rating
- 0
P
Printablesmitakskia
SteamDeck snap-on 7inch LCD mount
Model was made for playing nintendo ds style games on steamdeck with additional LCD or playing game while watching stream/video/movie. The main idea was to have one USB-C for power and video, but i failed to source correct LCD and cables.…
- Downloads
- 5
- Likes
- 2
- Rating
- 0
P
PrintablesRobert Posey
Chonky 7in KlipperScreen Cover for Voron 350
Works with some 7in touch screen with the ears on top and bottom. I was off by 1mm (115 vs 116mm) for vertical holes but it mounted fine. like this one I got the measurements from one that didn't have a digitizer for touch but I think the…
- Downloads
- 5
- Likes
- 3
- Rating
- 0
P
PrintablesTimoRito
Lucky clover / bando boot 7inch
Lucky 7inch by clover fpv. Bando boot ready for banger Fits 2808 and less
- Downloads
- 3
- Likes
- 0
- Rating
- 0
P
PrintablesMH
Stratux Display 3,7inch waveshare
30.4.21 New Version with holes for buttons Case for stratux Europe Project https://github.com/b3nn0/stratux and https://github.com/TomBric/stratux-radar-display You have to chose high qualitiy usb cabels, this is the most problem if it…
- Downloads
- 3
- Likes
- 0
- Rating
- 0
P
PrintablesRay Howard
Anet LCD Integration with Pi 7inch Touchscreen
This is a Mount for the Anet A8 LCD (5 buttons) it attaches to the back of Thing http://www.thingiverse.com/thing:1585924 Timelapse Backing: https://youtu.be/NMMJD39fxxo Faceplate: https://youtu.be/0KvTqpyjctU Print Settings Printer: Anet…
- Downloads
- 2
- Likes
- 1
- Rating
- 0
P
PrintablesDzidaloo
Vevor 7in1 Weather Station 60x40 Square Post Mounting Bracket
Bracket for Vevor weatherstatio to mount it on 60x40 fence post.
- Downloads
- 0
- Likes
- 0
- Rating
- 0