76 models
Print in PETG using standard PETG printing parameters or some other tough plastic like ASA. I used Inland PETG and printed with Prusa's generic PETG parameters. Part is thin, so infill 15% will be fine. PLA will work fine too, but…
Print approx. €5.04–€6.15 excl. taxPreliminary estimate for PETGSource material: PET
Modeled up a small Trashcan for my Bathroom. it got a Volume of around 2,7L. Dogpoop bags fit perfectly in it. The Outside measurements are 182mmx102mmx172mm Lid is designed to get bolted together with two M3x40 Blots and Nuts.
Print approx. €0.81–€0.99 excl. taxPreliminary estimate for one variant
I struggle with holding my tablets while reading books. The tablets are too slippery to hold without the cover, the very thin border causes pages to change because there is not enough room for fingers without the sensor flipping pages,…
Print approx. €2.36–€2.88 excl. taxPreliminary estimate for one variant
God that name's a handful. Basically this is a part you can fiction fit or glue into the chute of your automatic feeder! It fit's this model https://www.amazon.de/-/en/gp/product/B08V4XRFQ2/ (If Amazon didn't sneakily update the sold…
Print approx. €0.75–€0.92 excl. taxPreliminary estimate for one variant
This model gets a few downloads, I would love to see your end product, please post it as a make, it may motivate me to make upgrades or mods. Thanks! Overview The idea behind this case is to be simple to print in terms of setup, required…
Mini ITX Case as seen in this video (guide): https://youtu.be/OsDuiwyvBx8 Recommended minimum print volume to print this: 300x300x300 I printed all parts with a 0.6mm nozzle with 2 external perimeters and 20% infill with a layer height of…
Hier ein Ersatzteil für verschiedene Bausätze. Kompatibel mit LEGO® Technic 7M / 7L 4211805/44294194/44294 - 55mm lang
This is the second rendition of my first case ( here ). The case got an entire overhaul while mantaining the low profile gpu sandwich design. It consists of 10 pieces, it can be printed with a small printer and does not use threaded…
I remixed the feeding hole cover by Robware to have ventilation holes in it. Had an Amano that wanted to go exploring one day… So I just wanted a cover that keeps them in, but at the same doesn't completely block the already limited…
Two simple arms/props to hold open the lid of the 57L (15gal) Fluval Flex aquarium. They are long enough so that they just fit diagonally on a Prusa MK3S printer bed (just a smidge over 29cm in total length). Update: Two shorter…
Follower glock G17, G17L, G19, G19X, G26, G34, G45
My garage door keypad, an 877LM, can close the garage door just by pressing the enter button, no code needed. When I walk the dog, or take a car not parked in the garage, I want to easily close the door on the way out, and was annoyed…
OGRE250 A .67 Liter internally powered eGPU module capable of driving a 250 watt GPU through an OCuLink interface. For all information please see this thread on SFF.N, no information or updates will be posted here except for comments…
This is a simple screw on cap for a common size of large plastic jug, variously advertised as : 128 fl oz 4 qt 1 gal 3.7 L This type of jug is typically used for things like bleach, windshield washer fluid, etc. Child Safety Warning : The…
I have released a V2 here ! Improved design and print-friendlier. This is my first 3d printed case design, the Epsilon 570! It consists of a frame, two sidepanels and a set of feet for a total of 5 pieces. It can be printed with a small…
Applications: Bronco 2.7L EcoBoost: 2021, 2022, 2023 Bronco 3.0L EcoBoost: 2022, 2023 Edge 2.7L EcoBoost: 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024 Edge 3.5L Duratec: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016,…
Thank you @JeffCollins_3278720 for sharing that this handle is known as "size H" fitting the following boxes: 4, 6, 9, 12, 14, 19, 22, 24, 25, 77 Liter boxes (see…
Modelled these Lid Props for my Fluval Flex 57l. For My configuration you need to print: -1x Fluval Flex 57l Front -2x Fluval Flex 57l Corner
This model is compatible with the lego system.
Shimano pedal service tool TL-PD40-BTL-27L a tool to disassemble the shimano pedal. Similar to the TL-PD40 tool. can be used in combination with a 44 mm bottom bracket tool. I use it together with the BBB/BTL-27L. V2 is for a tighter fit…
This model is compatible with the lego system.
This model is compatible with the lego system.
I've modelled and printed these cases that fit the Aqara WXKG16LM and WXKG17LM very nicely. The cases can be mounted onto existing EU switch-boxes using the standard screw. This design allows me to still easily access the physical switch,…
This design fits a standard 80mm computer fan into the middle chassis fan slots in a SuperMicro CSE-846. I designed this so I could replace the case's loud factory fans (part number FAN-0127L4). Note that the fan can be oriented either…
Simple covers to help keep the T-slots on my Seig SX2.7L mill clear of shavings. Should work on equivalent mills as this model is sold under a number of different brands.
Needed hardware x2 608 bearings (22mm ext-diameter, 8mm int-diameter, 7mm thick) x6 M3x12 screws x6 M3 threaded inserts x1 M5 threaded insert (optional) x1 (or x2) PC4-M5 quick couplers for 4mm PTFE tube (optional) PTFE tube x1…
This model is compatible with the lego system.
This is an updated version of a hopper with bellow. The initial model works fine, however when switching from pour over to espresso a bellow will be helpful to clear the left over fines. The hopper bellow and base are based on my Ceado…
Copy of Genuine Volkswagen Tail Lamp Assembly Cap 7L6-945-285
Einfaches Modell, aufrecht ohne Stützen zu drucken. Links Halter für Eurostecker, rechts Halterung für Ladestecker, vorne für Kabel. PLA ist normalerweise ausreichend. Simple model to print upright without supports. Left holder for Euro…
Verschlussstopfen Kd3-7L15
Update: I've made a new version that hangs down a tad more and has sidecovers. Thus not blinding you when standing to the side of the aquarium. A quickly made light reflector for the Fluval Flex 57L (15gal) aqarium lamp. It simply slots…
This is a mount that holds a Grässlin Rondomatic 400 autofeeder, on top of a Fluval Flex 57L (15gal) aquarium lid. The autofeeder screws onto the mount (with the original thumb screw) and simply sits on top of the Fluval Flex lid. The…
Fruit Fly trap for classic O,7l thread jar working with classic 0,7 thread jar Lid name is TO82 Print settings 0.2 mm layer 4 walls 15%infill no supports
Seat adjuster hand for Mitsubishi L400, Delica L400, Space Gear. OEM number: MR728482\75617L Perfectly fits on 1999 L400 seat with original mount screw. All dimensions\curves\hights reproduced from original broken part. LH by default.…
Rails for Under Desk Storage Bins / Boxes. Left, right and center rails. Compatible with CURVER INFINITY 11L and 17L boxes (without lids) Box dimensions: L35,6 x B26,6mm Remixed from IKEA Trofast rail system. LONGSIDE and NO LONGSIDE…
DRO Mounting kit for Paulimot Sieg SX2.7L Mill Scales used: X-Axis: travel length 550mm Y-Axis: travel length 200mm Z-Axis: travel length 300mm X-Axis Mount: DRO_bracketX_Left.stl (1x) DRO_bracketX_Right.stl (1x) DRO_bracketX_Plate.stl…
Bonjour, C'est un de mes premiers modèle issus de Fusion360 que je fais en phase d'apprentissage. Etant fan de Dragon Ball, j'ai conçu ce logo de cet univers qui m'avait fait tant rêver. Faites vous plaisir ^^! Print Settings Printer…
clamp for kis C Box cube 27L box can be bought in OBI stores for perfect airtightness use 16 clamps and sealing tape between box and lid print with any material, any layer height, 5 perimeters…
Have you ever noticed that tricky pinch point near the foot pedal of the Kohler 47L pedal-operated garbage can? If you're a parent, you probably have, especially with little ones around. After a few too many close calls and toe-pinching…
End cap 4040 for Ender 3 or others, with the logo of the company a7lab.xyz, which makes the best v-slot wheel and idler pulley.
Since my first published keybboard was The1987 (https://www.printables.com/model/299777-the1987-a-modular-retro-inspired-87-key-mechanical) and it's fairly popular, and its designed around the Phantom circuit board and Teensy 2.0, which…
I wanted a way to fix the monitor somewhere out of reach, without having to make holes or anything complicated. This supports solves the problem: it clips itself on any europlug you find with many USB power supplies. The support is…
Overview My Canon camera doesn't have an input for an external power supply, so I created a battery dummy. To power the camera, the dummy connects to a 7.5V power supply (make sure it's regulated!). The camera has a spring-loaded opening…
Tapa impresa en PLA, se le puede aplicar un poco de calor con un secador de pelo para darle la misma forma que tiene la tapa del acuario, el resultado de esta forma es muy bueno. He añadido una versión V2 con los cantos redondeados.
Latch works fine, might need some refinement because the hook was broken off, tested it, works.
Pro udržení vodotěsnosti je nutné víčko termo plechovky dostatečně utáhnout - většinou postačí rukou. Povolování utaženého víčka rukou mi kvůli hladkému okraji přišlo nešikovně komplikované a proto vznikl tento jednoduchý povolovák. Při…
Onewheel Roller for X7LR (and maybe other X7 models?) Showing how it works in this vid https://youtu.be/ehLzSejXJvo?si=nYMx1bgEEFwtQE_u I remixed this from morelykerts' awesome Printables wheel stand design. Fair warning: I'm not great at…
adapted Z plates for CR10v3 (mount stock breakout board, optional mount for BTT SFS) also default Z plates with corrected belt mount for straight belt path All screws retain from original BOM Use with M5 idler from A7 Lab…
Is shrinkflation amusing yet? Less 2187 for more...something Since I recreated The1987, it followed suit that i should include this one as well. Its the more modern design with a small sprinkle of cyberpunk. The2187 is the pretend future…
After hardwiring the power to a new dashcam in my 2010 Ford F-150, I found that the stock fuse box cover no longer fit in place due to the added height of the fuse taps. I designed this fuse panel cover to both offer more clearance above…
Battery holder for piit79's Rev57LP keyboard with nice!nano v2.0 board . I used YJ551430 180mAh battery 2x1 pin header socket soldered to directly to the battery wires 2 pins from a pin header (i.e. without the black plastic part)…
This innovative adapter allows you to easily use 15-liter bags, which are standard in many Blanco waste systems. Designed for versatility and convenience, the adapter offers multiple benefits: Use Standard Bags : Many green waste sorting…
A spare part compatible with several vehicles from the VAG group. Spare part number is 7L0 907 511 AL or 7L0 907 511 E This is an enhanced version of the original VAG part. You can insert an M3 bolt through the star-shaped piece and glue…
This tiny SFF PC has retro style, but room for modern components, and assembles without any extra hardware (aside from four screws to mount the motherboard, and four screws to mount the PSU). All pieces assemble by sliding into joinery to…
X endstop cover for Ender 3, CR10 or others, with the logo of the company a7lab.xyz, which makes the best v-slot wheel and idler pulley. Use 0.8mm VHB tape
Držák baterie BP27Li-18015 pro akumulátorovou vrtačku.
Created to work with the Sensor Bin from Costco - 47L Sensible. Part broke for use after manually opening bin - Sensor bins and small children aren't great. Print Settings Printed with support, 0.3mm layer height and with a brim in PLA…
TOUAREG 7L MANUAL TRANSMISSION - 7L6 711 113 E PLL - 7L6711113EPLL
A adapter/spacer part that makes these fender deletes compatible w/ the different sized parts on the Long Range model of the X7 Vesc based boards made by the fungineers. The X7LR is a fairly new model and the fungineers had to change the…
This handle is known as "size K" for 17L and 32L US boxes (see https://www.reallyusefulproducts.co.uk/usa/html/onlineshop/rub/aBoxHandles.php for comaptibility list by the manufacturer). I printed in PETG (in translucent blue) with…
a simple bench, with light armourment
IBM NetVista 37L4987 LED Cable This recreated LED cable for IBM NetVista systems (FRU 37L4987) connects the front-panel status LEDs to the motherboard, allowing the system’s power and activity indicators to function as intended. Front…
SL1200 M7L Dust Cover Corners
This won't win any Prusa Prizes for advanced engineering, but it works well with my Really Useful 8 Drawer stack. Adjustable drawer divider to help organize each drawer. Designed to print without supports. Separate left and right side…
I made this for a YTX7L-BS -12 Volt motorcycle Battery. I use it with my Predator 3500 generator. the battery stays on a trickle charger in my nice warm garage and I bring it out to use in the generator shed when needed. I bought these to…
I have the Franke ATS Cube installed in my kitchen; I use one of the 7-liter trash cans for residual waste, so I wanted a lid just for that container. Dimensions: 15 cm / 29 cm / 18 cm Printed in PLA+, 0.28mm layerhight and 5% infill
Onewheel Roller for X7LR (and maybe other X7 models?) Showing how it works in this vid https://youtu.be/ehLzSejXJvo?si=nYMx1bgEEFwtQE_u I remixed this from morelykerts' awesome Printables wheel stand design. Fair warning: I'm not great at…
Hier ein Ersatzteil für verschiedene Bausätze. Kompatibel mit LEGO® Technic 7M / 7L 4211805/44294194/44294 - 55mm lang
2-in-1 Dust Adapter for Makita LS1017L / LS1018L Miter Saws This dust adapter is specially designed for Makita LS1017L and LS1018L miter saws. It allows you to use either the original Makita dust bag or a 100 mm diameter hose connected to…
3D printable topographic miniature of Farnworth, BL4 7LJ - 🇬🇧 United Kingdom Capture the beauty of Farnworth, BL4 7LJ 's city landscape with this topographic miniature! This 3D model represents the geographic area around the geo…
Einfaches Modell, aufrecht ohne Stützen zu drucken. Links Halter für Eurostecker, rechts Halterung für Ladestecker, vorne für Kabel. PLA ist normalerweise ausreichend. Simple model to print upright without supports. Left holder for Euro…
