Counting matching models…
Backstory A friend of mine owns a Renault Twizy. The Renault Twizy is a small electric car with scissor doors. These scissor doors make contact with a door stop buffer (Renault Part-Number: 908782937R), which softens the movement when…
These knob design is from another transceiver of a famous brand. I like those very much, I decided to draw and adapt them for the AnyTone AT-D878U transceiver. It is kind of a difficult print, you have to have some experience. Also please…
The enclosure has a volume of approx. 3.15 liters. The port was tuned to 89 Hz with a slight dip in response above that according to WinISD. The dip can be corrected with an equalizer at 175 Hz +1.5 dB (Q=1.0). With these settings, the…
Organizer for 5 tools for Barista Pro. I have model BES878BSS and I don't know if it works for other models, but if you interested, we can try to work it out. You can put it on the warmer surface. I use it for next 5 tools: 53mm Coffee…
I bought a 3M 6000 series full face respirator. It's great, but obviously not compatible with my spectacles. So I looked for the spectacle kit that I was sure would exist……
Very simple knurled knobs for your Anytone 878
This model is compatible with the lego system.
A tip and nozzle holder for Yihua 8786D Soldering Station with mounting holes for adding accessories. The holes are for 4mm screws and are on 10mm centers. It holds 10 tips and 4 nozzles.
Redesign of https://www.thingiverse.com/thing:5398229 with better locking/fit for radio and 32mm handlebar diameter. Feel free to download model and adjust to your needs. Successfully printed on a Prusa MK3S using - Prusament ASA Jet…
The source marked this model as adult content.
Hood seal / Windscreen support. The insert needs to be adjusted with a knife!
Not finding a good mount for my Anytone 878 in my Jeep Wrangler JK, I designed an adapter to slip over a VersaMount2 with a pressure fit. So far, it's held up to a couple of trails, but throwing a little glue on there wouldn't hurt…
Remixed from Kai's snap on one piece handle, slightly lengthened the handle and added some guide text. Printed in PETG with 60% infill and 0.2 layer height. Filled with some plaster putty but still tidying it up… functional though!
This model is compatible with the lego system.
lego 4215 73878 23405 60601 38320 51266 60593 51239 60594 60598 60607 60608 60614
Jedná se o repliku z Schüco Balkontür-Schnäpper 287893 profil CT70. Na původním díle prasklo jedno rameno a potřeboval vyměnit. Originál moc dlouho nevydržel. Tiskl jsem z PETG. This is a replica of the Schüco Balkontür-Schnäpper 287893…
A quick and dirty remix to create a 2 piece option for a contrasting colour indicator on the volume knob. Assemble with a drop of glue. Could do with a little more tidying up but it's my first remix and I only used Tinkercad so forgive…
This is a battery cover for a AnyTone 868/878 or BTECH DMR-6X2 series 3100mAh radio battery. It protects the live contacts on both sides of the battery from getting shorted when tossing it into a bag. I printed it in ASA and PLA. Both…
A few small accessories for the Yihua 2-1 in soldering/hot air station (might work on others, seems like the soldering handle stand is shared with others). angled soldering tip holder vertical soldering tip holder Both can be mounted on…
Update: 12/23 - Realized that I added the clip adapter on the wrong end from the original model so that it was upside down. After trading messages with another person worried about the strength of the tab, I also remixed it to separate…
Protective Slipcover for AnyTone AT-D878UV Plus DMR HT. Noticed the front of my Yaesu FT-2D was getting scratched up, so I designed slipcovers for my HTs to protect the LCD displays when you put them into a backpack. Now, I don't have to…
So my bench is a watchmaker's bench and my workshop is a 1-car garage, which means stuff needs to be portable. I needed a rework station and they all pretty much assume they own your workspace and maybe elsewhere? But not around here they…
I like to listen to my Ham Radio while working, but it doesn't like to stand up on it's own. Enter #gridfinity. Print it however you normally print your gridfinity stuff.
Spare batteries for 878's often ship without a clip, and the clip is hard to find/expensive. So after 15 mins on Fusion 360 and a few grams of ABS later… Be warned: you'll need a couple of M2,5 screws.
Connecting Pin: sand if neccessary Assembly: apply glue if neccessary Credit to Kai who made the original snap-on steam lever with CAD files. The original works pretty good, only the unibody one looks less charming, and the classic…
This is an add-on for the YAOGONG 8878D soldering station, that fits the stock soldering iron stand, has 12 slots for additional soldering iron tips and 3 for the hot air gun tips. It's great if you have multiple tips and don't like to…
I needed a stand for my Anytone 878 radio that could support the radio having a battery eliminator connected. There's enough room on the front that all the front panel buttons are accessible. The cable from the battery eliminator goes…
I bought a spare battery for my Anytone AT-D878UVII. When taking it with me, I had the problem, that I had to take care not to cause a short circuit. To protect the battery of an Anytone from short circuit, I designed a cover, which I…
This model is compatible with the lego system.
Hey ya'all, All holders I found were loose so drew and I iterated 5 times to make a prefect fitting on the radio, but still retain easy removal. This is based on the original battery with the original spring tension belt clip. I made the…
Handlebar holder for Anytone D878UVII radio sized for 22.2mm or 7/8" diameter handlebars.
Here's a replacement knob for the power/volume knob on the Anytone 878UV. Should also fit the 868, 878, and 878UVII. Example in photo was printed at .12mm layer height, with fuzzy skin in ABS-GF.
Easily add window screens to your louvered air vents to keep bugs out of your garden shed. Use PETG filament for outdoor use. No supports or brims. Print 2 frames. Apply outdoor rated 1" wide double stick tape to back side of frame. After…
I grabbed a set of Motorola XPR3000 series replacement knobs off ebay to replace the stock ones which are pretty meh. I had to trim the slight overhang of rubber off the bottom of both knobs to make them fit nicely. The channel select…
I wasn't a fan of the "stuck down" container for the tip cleaner so I did my own even had some filament in a strangely good color match, I have added the location if you feel the need to screw it down from under neath but its a tight fit…
The skid plate on my Bauknecht GSXK 5020 SD dishwasher broke, so I designed a compatible replacement. Apparently these skid plates fit also refrigerators, freezers and other appliances from many companies. Print in STL orientation at 0.2…
A compact holder for the Yihua 8786D soldering station. Stores 3 hot air gun nozzles on the side and mounts with two M4×6 screws. 🖨 Print time: ~31 min ⚖ Filament: ~11 g ⚙ Settings: 0.2 mm layer height, 3 walls, 20% infill Setting Value…
PETG 4 perimeters, 50% infill, no support, 5X hotnut (M3X4X4.2) , 5X M3X6
This wonderful game will highly profit from some structure and order. As nobody had designed and shared an organizer, I did it myself. Now, the select owners of the game who also happen to have a 3D printer can print this and enjoy the…
Ersatz für den Stopfen/Kabeldurchführung mit der Teilenummer 251971878A. Für die Relaisdose in Volkswagen T3 WBX.
The enclosure has a volume of approx. 3.15 liters. The port was tuned to 89 Hz with a slight dip in response above that according to WinISD. The dip can be corrected with an equalizer at 175 Hz +1.5 dB (Q=1.0). With these settings, the…
This model is compatible with the lego system.
This model is compatible with the lego system.
A practical organizer base designed for the 8878D rework station. This model helps keep all main components in one place - including the soldering iron, hot air gun, and control unit. Instead of a scattered workspace, this base brings…
Replacement door handle for Beko washing machine, part number 282878. I've printed it in PETG and it goes strong since 28th of July.
This model is compatible with the lego system.
This model is compatible with the lego system.
This is just a simple phone Mount for my office phone. I know it works for the Cortelco 8780, but probably works for many others with the same distance on the keyholes.
A practical organizer base designed for the 8878D rework station. This model helps keep all main components in one place - including the soldering iron, hot air gun, and control unit. Instead of a scattered workspace, this base brings…
8878D soldering station holder for IKEA Skådis Print instructions Unassociated tags: skådis Category: Electronics Summary 8878D soldering station holder for IKEA Skådis Print Settings Printer Brand: Prusa Printer: i3 MK3 Supports: Yes…
