Anytone AT-D890UV / AT-D878UVII-Plus radio holder NO play, snug hold
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
All holders I found were loose so I iterated 5 times to have a snug fitting on the radio, but easy removal.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 34
- Makes
- 0
- Views
- 203
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Hey ya'all,
All holders I found were loose so drew and I iterated 5 times to make a prefect fitting on the radio, but still retain easy removal. This is based on the original battery with the original spring tension belt clip.
I made the charging indicator light and the charging port accessibel also.
I own the AT-D890UV but it should also fit the AT-D878UVII perfectly as well.
I mounted it with 4xM3 bolts with holes printed at 2,75, and I hand tapped to prevent layer splitting. I feel inserts are not required here. Hole patern horizontal 28mm CTC vertical 23,5mm CTC
I also uploaded a bare bones version with no holes so you can edit it to your needs.
-I printed in PETG
-100% infill (resists warping in hot car)
-0.4mm nozzle
-0,2mm layer lines
-I printed with supports, excluding M3 holes
-I printed upright