Counting matching models…
Created GPS Mount after waiting for KTM Powerparts GPS mount (A61012992044) being on backorder. There are two file versions. One that fits the 890-R windscreen and the other for the S-model windscreen. The S-model version extends out…
KTM 790/890 Adventure chain slack tool! Slide in from the back on the chain buffer till it reaches the front upper chain guard mounting point. It might fit the KTM duke. 38mm is how tall the actual printed part is off the chain guide. If…
este es un soporte para w702 de carpuride para montar la pantalla
Tool to help check chain tension and wear as instructed in the KTM 790/890 Adventure owners manual. The extruded side is 3.5mm thick (middle of the acceptable range 2-5mm) and 25mm wide. The bottom is grooved to check chain wear and…
This model is compatible with the lego system.
This model is compatible with the lego system.
Based on this design from reddit! I used a piece of 110mmx40mm sandpaper and a couple of m3 screws. Does it work? Kind of… Is it cool? I think so.
This model is compatible with the lego system.
Step back in time with this meticulously crafted chess set, inspired by designs from the Russian Empire between the late 18th and early 19th centuries. Perfectly fitting a 45mm field size, these pieces echo the elegance of the past with a…
This is my design of a poor man's “power plate”… You can use whatever filter you want, drill or zip holes into it, and use it as you need. OR, you may purchase the Rottweiler Performance intake (red=race) filter, and the holes are already…
There was a little gap between the mounting point and the Original GPS Mount (KTM Part Nr. 63512992144); this allowed the mount to rock back and forth, which slowly but steadily seemed to loosen the two bolts holding the mount. The part…
Quick mount to adapt the Quadlock phone mounting system to the KTM 790/890 Adv. The mount is angled downwards 5 degrees to better match the angle of the cluster. The long model works well with the vibration damper and a standard…
This is a mounting bracket which fits the yaesu 8800, 8900, 7800, 7900, and probably others. When printed with ABS this is surprisingly strong (3mm walls probably help), but you will likely need longer screws than the ones you might (or…
A small combine I made for my Dragonwood & Pacific railroad, loosely based on the (albeit narrow gauge) combines used by the United Verde. While it's freelanced, it's probably as realistic as it gets. I read way too many primary documents…
Wall mount shelf that fits a cable modem "Sagemcom WiFi Hub C2 - F@ST 3890V3 CHWU" The supports below the shelf doubles as convenient points to tie the cables to. The hexagonal holes in the shelf are for ventilation, as the modem has…
Supports: Yes Rafts: No Resolution/Layer Height @ .55mm Infill 100% PETG minimum ASA or ABS preferred ***I would recommend that you split this model in half and print vertically so that the reinforcement of the way the plate prints is…
Simple holder for mounting Uni-T UT890 Multimeter to Honeycomb Storage Wall. Uses M4 insert to attach to the wall. I also made a version which uses empty insert instead if you don't have any M4 screws laying around (not tested). I…
First, I made the two top pieces: “Top Half A & Top Half B with 3-”Center Dowels" then glued them all together. I used “Glazing & Spot Putty” I bought from any auto parts store and hand spread it over the top but be careful not to get any…
Size in mm is: 42 x 32 x 7 Screw hole: 6 mm
Case 4890 Tractor - 1:16th Scale Uses M4 & M2 Screws M2 Rod used to mount mirrors to cab
QYT KT-8900D & ZASTONE MP380 Knob Similar size as orijinal knob. I haven't test it on KT-8900D but the that device looks the same, just branding. If you like this design please consider buying a coffee for me. Lol. Thanks…
This is a spare IKEA 108903 - STUVA NORDEN HEMNES - Quermutter - Barrel Nut for an Hemnes bed. We lost one. So I designed, printed and used it succesfully. Just cut or press the M6 thread into it. Use the original bolt for pressing or an…
Designed a handle for the Dometic camping fridge. You can add the moving handle on both sides, then you can open the fridge also from both sides. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: Yes Supports: Yes Resolution:…
Printed in PLA might need to increase scale by 1 or 2%. Printed in TPU with 20% infill the sockets have enough tension to stay in place on the bike.
KTM 890 Adventure has annoying issue. The hole in the rear mud flap does not make sense and just lets mud spray through and cover the rear light. This reduces safety even after light off road riding. it definitely needs to be covered. so,…
A customized MagSafe iPhone mount for Samsung C34H890WGU - CH89 Series, made by a 3D scan and stoneburner's OpenSCAD design. P.S.: It seems there was an export issue with scaling. Cura scaling to 10000% works. For other slicers scale to…
2022 KTM Duke 890 R Tank Fairing Bolt washer Direct replacement with an M6 x 1.0 x 12 mm bolt 100% infill OR 100% perimeters recommended. Use high temp stuff like PETG or ASA or ABS Layer Height: resolution 0.10 mm (or 0.15 mm)
Finding OEM parts might be difficult to find outside the U.S. therefore having a temporary option can be useful for KTM users of the 790/890 Adventure/Duke models (up to 2021). I created a 3D model based on the OEM Part 64112181100 and…
This is a prototype of a brake line relocation bracket I made from scratch. The stock brake lines on KTM Duke 890's have a T in them that blocks access to the triple tree stem hole, making using pin style front stands impossible. I use my…
J'ai créer cette pièce pour ma moto car en France et Certainement dans d'autre pays, il est obligatoire que la plaque d'immatriculation soit riveté (pour quel ne soit pas amovible). Mais Ktm venant d'autriche et n'étant pas un pays ou…
I used it for my Jansite Apple CarPlay display I got from AliExpress, but as far as I know it is the same harware as the Carpuride w702 so it should also work for that model. Features: display cant rotate on the mount no drilling or other…
I've been busy assembling my HSW and the various mounts I needed, and noticed that there wasn't a mount already available for the mini PC I use as a software development server. The model includes the word ‘FRONT’ on one side - this is,…
Given the original files were irretrievably archived by Autodesk during their Fusion 360 downgrade, this will be the last version. THE V5 FILES ARE CURRENT AND HAVE CORRECTED DIMENSIONS The "Fancy" version has some nice chamfers and…
This is simple housing for a Siemens Sirius ACT EStop that will fit on 4040 VSlot profiles on the Ender 3 and be secured by the sheet metal control board compartment. The two rectangular cutouts on the back cover are made to fit two WAGO…
Mopar #2789037 1967-79 Sunvisor end tip. Made as a quick temporary fix. Original designer: Chrysler Corporation, Detroit MI, USA. Available as aftermarket part. Support Your local retailer. Printed in TPE88. Fit is bit loose on sunvisor…
Uses 4x OEM hardware. Recommended filament PETG or ASA (or better). 2 perimeters is fine, no supports needed.
Circus of the Past - Oddities - PT Barnum's Armless Wonder (Charles B. Tripp) & Legless Acrobat (Eli Bowen) - 1890's 3D printable model.
I have designed an engine protection cover to prevent scratches from boots. The installation doesn’t require any bolts and is easily removable. The assembly requires 3 magnets: one 15 mm in diameter and two 10 mm magnets, though it can…
Rack mount for Minisforum UM890 Pro
Guten Tag zusammen, die Mutter einer Freundin hat mitbekommen, dass ich jetzt neu seit ein paar Monaten einen 3D Drucker habe, den ich gebraucht auf kleinanzeigen gekauft habe :)! So freut es mich mit diesem “weiter-verwendeten” Drucker…
Simple mount to secure the Liftmaster 890 remote to a flat surface. I use it to secure it to the interior of my motorcycle tank bag. Version 2 I made the side clips more aggressive and the key chain notch latching. Please Review and Share…
To print use PETG, no supports are required. You will also need 3 threaded inserts M5 x 9.5 by CNCKitchen. If you have bigger screen or want to use the high position on small screen, then I would recommend something like…
Hey ya'all, All holders I found were loose so drew and I iterated 5 times to make a prefect fitting on the radio, but still retain easy removal. This is based on the original battery with the original spring tension belt clip. I made the…
multimeter holder model UNIT 890G wall mount
Parametric buttons to easily customize the layout of your Kenwood radio's programmable function buttons. With up to 11 configurable function buttons, the TK-690, TK-790, and TK-890 are versatile commercial FM radios, that are easily…
Stand for "Minisforum UM890 Pro" device to get rid of the very bright blue power led (instead of using black adhesive tape) and more convenient operation of the power switch. ;) Options are: 2 different feet 10mm height slanted 18mm…
Tool holder crown, more robust than the original. The motor shaft is 5mm, but the hole in the piece is 4.8mm to ensure a good press fit. Print it vertically, with the face facing the motor on the build plate. No supports needed.
Quick and dirty remix of @nbss_198530 navi mount for the KTM 890 Adventure for Aoocci C6 Pro. Prototype printed in cheap PETG, with low infill, low perimteter/top/bottom count, still stable enough to not easily break it by hand.
This is a reinforced replacement for the factory "Mickey Mouse" coolant flange found on the BMW E92 (N51/N52/N54/N55 engines). The original plastic part is prone to crumbling, leading to rapid coolant loss. This model is designed for…
The model was printed with PLA and the Elegoo Neptune 4 Pro. The printing took just over 2 hours at 0.2 definition and 30 percent infill.
This is a dust shoe for the Porter Cable 690 / 890 routers. The screws to attach to the lower base are 1/4-20" x 5/8" SHCS Long These are the magnets used, 10mm x 3mm and hot glued into the upper shoe.…
As the Hailo trashbin didn't offer Lids, i created one by myself. This is useful, for instance if you store organic waste in your trashbin. It is compatible with those 7 Liter compartements: Articlenumbers: 1082479 and 1068909 Those bins…
Years ago my trusty Philips SBC HP-890 Headphones died on plastic cancer, the parts between the speakers and the headrest broke away in thousands of pieces. To good to be thrown away they rested in the shelf with no real future. Last week…
A simple 3D printed mount for the QYT KT-8900D radio for the little hole in the dashboard of a 2010 Dodge Grand Caravan.
I have designed a 3-cylinder diesel engine with a turbocharger iin the DOHC configuration.. The engine features a functional valvetrain with two camshafts – one for the exhaust and one for the intake. There are 12 valves in total. The…
nachdem das original Teil gebrochen ist, habe ich es anhand des original ersatzteils nachgezeichnet.. nicht 100% aber passt.
Remixed Rear Wing by StreelyDan for the Haiboxing 16890a to have appropriate geometry for attaching this wing to the Haiboxing 16890a chassis.
If you are riding your KTM Adventure in Dirt you know that the side fairngs collecting quite some dirt. The uderlying casings for the tools suffer a lot and the rubber closings will fatique over time. Mine were broken after 2 years and it…
The mud flap on KaThy-M motorbikes has a big hole in it through which mud and debris gets thrown onto the stop light. I made this hole plug to stop it! You will also need some screws, plastic/wood thread with flat cap 3.5mm diameter, one…
This model is designed after my 2022 Duke 890 R brake master Reservoir delete kit that I frankenstein'ed together. It won't make you burn faster lap times at the track, but I guess you'll look cool doing it…? :D Either way. I printed this…
this is a replacement for part 6258900 from the Frozen ice Castle lego duplo set kids wanted to play and lost the original part. I threw this together quickly and printed it. it work, but has some minor issues. I realize this is entirely…
I made this because I was in search of a sleek solution for wiring up a large fridge with false plug protection within the Reflex SI series. Sadly, there are none (even without false plug protection or any plugs at all for that matter),…
Neue Ablagehalterung für die Daytools Heißluftpistole LS-8908 zur Montage auf dem Gehäuse. Die seitliche Anbringung des Halters hat mich schon immer gestört, weil hier Platz verschwendet wird. Hier also ein Halter, der auf dem Gehäuse…
Made this cover to keep the one button we use from activating in my pocket.
Hey all! Quick model for dropping the high-fender from a 2023+ KTM 890 Adventure R enough to install 3" cube lights up an under the fairing. I've included a taller version for 3" cubes (pictured), and a shorter version for smaller lights,…
A detailed 1890s steam coaster featuring a single funnel, derrick masts, and well decks. Inspired by real-world coastal vessels, this model captures the era's industrial aesthetic with clean, unlettered paintwork. Print at 100mm length…
Similar to my other model, I created a dust cover for the HBX 16890 to protect it from coarse dirt. Since I don’t know how the motor’s heat dissipation will perform over time, this may not be the final version. You will need an M4x16 or…
This model was made for people who do not want to spend another 60$ for seal installer while overhaulin your NAG1 (722.6) transmission for your Chrysler, Dodge, Mercedes and many other cars and brands. The photo of the installer is just…
Replacement for the Valeo rubber headlight cover. Best printed in TPU for the flexibility. Fits perfectly on the VW T6. FITS VARIOUS VEHICLES INCLUDING RENAULT CLIO, CITROEN C4, VAUXHALL AGILA, SUZUKI SPLASH, SEAT LEON , SEAT ALTEA, ALFA…
Demo of how such shutter operates with added rubber band: https://www.instagram.com/reels/DTndZO5guC0/ I used Gemini prompt shared in the youtube video "High-quality 3D render of a Lancaster rotational photographic shutter for old vintage…
Der Heckträger ersetzt das Originalteil der KTM 790 / 890 Adventure. Die seitlichen Handgriffe fallen weg. Das sorgt für eine schmalere, cleanere Optik am Heck. Es handelt sich um eine extra stabile Version (verstärkte…
Platform for the Delonghi Dedica EC890 to position small cups closer to the portafilter. Reduces splashing to almost zero. There is a clearance of approx. 7 cm between the platform and the portafilter for the cups. Four magnets with a…
This model is based on a historic photograph taken in Rochford, Essex around the turn of the 20th century, showing a travelling performing bear led through the town. According to local records and accounts linked to the Horse and Groom…
The ball-head adjuster was worn out on my bike and no-longer was holding the adjusting screw properly. This replaces the KTM part 61614019100. Print with 100% infill, 0.16 layer height and 0.4mm nozzle. PETG recommended.
I designed ink tray that used to hold ink bag for EPSON WorkForce Pro WF-C5790 and WF-5890 printer. Because replacement ink trays I found online are expensive.
After buying axle sliders for my KTM Duke 890R on AliExpress ( https://de.aliexpress.com/item/1005009783282434.html ), I noticed that the recesses were too large on some of the sliders, preventing them from properly aligning to the axle…
Just a speaker adapter for a 2017 Subaru Crosstrek, didnt like how thin and flimsy the Metra 82-8901 was. I then re-designed one, it has both 4 bolt pattern and 3 bolt pattern for the speakers, it does what the metra 82-8901 does. The…
Parametric buttons to easily customize the layout of your Kenwood radio's programmable function buttons. With up to 11 configurable function buttons, the TK-690, TK-790, and TK-890 are versatile commercial FM radios, that are easily…
A small combine I made for my Dragonwood & Pacific railroad, loosely based on the (albeit narrow gauge) combines used by the United Verde. While it's freelanced, it's probably as realistic as it gets. I read way too many primary documents…
Platform for the Delonghi Dedica EC890 to position small cups closer to the portafilter. Reduces splashing to almost zero. There is a clearance of approx. 7 cm between the platform and the portafilter for the cups. Four magnets with a…
Given the original files were irretrievably archived by Autodesk during their Fusion 360 downgrade, this will be the last version. THE V5 FILES ARE CURRENT AND HAVE CORRECTED DIMENSIONS The "Fancy" version has some nice chamfers and…
Remixed Rear Wing by StreelyDan for the Haiboxing 16890a to have appropriate geometry for attaching this wing to the Haiboxing 16890a chassis.
Quick and dirty remix of @nbss_198530 navi mount for the KTM 890 Adventure for Aoocci C6 Pro. Prototype printed in cheap PETG, with low infill, low perimteter/top/bottom count, still stable enough to not easily break it by hand.
Mopar #2789037 1967-79 Sunvisor end tip. Made as a quick temporary fix. Original designer: Chrysler Corporation, Detroit MI, USA. Available as aftermarket part. Support Your local retailer. Printed in TPE88. Fit is bit loose on sunvisor…
Prints in two pieces. The lower piece can be held in with a zip tie, and has room to use the original velcro strap to connect the battery. Designed for a 75mmx34mm battery (2200mAh 2S), but can hold up to 88mm and maybe more with some…
I have a house full of cabinet drawers where the rear brackets started breaking. So I drew this 3D model that was inspired from the original bracket that broke. The ideal was to be a drop in replacement that is perhaps a little stronger…
For KTM 890 Adventure riders who face the common annoyance of plants getting wedged between the plastic fender panels during off-road rides, I've created this cover as a potential solution. This design fits the 2023 KTM Adventure R…
This is the S version with 5mm offset holes to center the Thorkracing T665 DMD device when using the metal locking mount
This is a replacement for the hockeystick used in the playmobil sets
This is in case you lose caps for the air ducts when doing maintenance to your motorcycle. This is the kit https://ktmtwins.com/products/ktm-air-filter-kit-790-890-adv-r-2019 but I haven't been able to find a place where this parts can be…
70% PETG Knurled inserts (double twill) 4x M4 X D6.5 X L8.0 for the AMPS M5 X D8.0 X L6.0 for the OE screws There's a blank there from factory, you should use the OE screws into the M5 knurled inserts. I had mine on for many thousands of…
Vertical stand or foot name it yourself. After loosing my original stand for this multimeter, i've decided to make this. It's not perfect, but it's working so I'm so proud of this. After printing, you must sand pins around and shorten…
This model is compatible with the lego system.
Replacement Dial Knob For Yaesu FT-8900R. I remixed the one the other guy made because it didn't fit on my radio. How I Designed This I imported the other knob into tinkercad, then I did some manipulation. I eyeballed the block inside…
This model is compatible with the lego system.
I used 3M double-sided super tape to mount this to my sailboat, gelcoat. No real rough use but it seems plenty secure. This can still use the plastic spring if desired from the original model.
Wanna fit whatever grip you like on your KTM 790/890 and Husqvarna 901? KTM will not sell you just the throttle tube, aftermarket CNC tubes cost 80-100 Euros. So I made my own! Key advantages of this product: Enables installation of any…
This is a simple, straightforward 3D-printed cylinder designed to fit between the Radtel RT-890 radio body and the antenna. Its main purpose is to cover and hide the exposed SMA-to-BNC (or other) adapter, giving the radio a much cleaner,…
3D print designed to mount a Sagemcom Wi-Fi 7 F@st 3890/F@st 3896 access point on a power outlet. This access point is used by internet provider Delta in the Netherlands, among others. This way, you don’t have to place the access point on…
![Turbocharged Diesel Inline-3 Cylinder [890 cm³ / 54.3 ci]](https://media.printables.com/media/prints/b352539c-fb03-4cb6-a8b8-4de8b595200f/images/13868135_7d755ae5-dc2f-4c1d-87a5-47ea71c81fd4_c6288e3a-b412-45fe-aab6-26f94774e29d/img-20250103-wa0013-removebg-preview.png)
