Counting matching models…
>> This mod may void the warranty! << >> Modify the radio at your own RISK! << Order a kit: Purchase a kit here: https://forms.gle/EGKaYYa485J8wiMW9 Go here for details: https://github.com/N0BOY/FT891_powerpole Enjoy it! - Jason Wang,…
Petřín Lookout Tower, one of the most prominent landmarks of Prague, was built as part of the Jubilee Exhibition in 1891 as a loose copy inspired by the Eiffel Tower (at a ratio of 1:5). It is 63.5 metres high, and 299 steps lead to its…
Print 1 each as downloaded for the Left side and 1 ea (mirrored) in your slicer for the right sides. (probably in PETG if you're going to use them outdoors) utilizing the provided hardware that comes with the Yaseu FC-50 Tuner. Don't have…
I just picked up my fourth HF radio, a Yaesu FT-891 and I needed rails for it. These rails protect the front knobs and rear connections very well without adding alot of bulk. The slots on the side are mlok dimensions so you can add any…
These are the files for the ham radio go-box that I made for my Yaesu FT-891 HF ham radio. The box I used is the Apache 4800 case from Harbor Freight. A full list of materials I used for this box can be found in the description of the…
Yaesu ft-891 Display protected frontcover. It protects you display form overheating in the sun. The Frontcover fit completely over the display control part. I did not include any logo for theft prevention purpose.
I run my Yaesu FT-891 with the front prop up and that aims the speaker up and away from me. I designed this dome to fit over the speaker and push the sound more in my direction. It uses several 6mm x 2mm magnets to secure it to the top of…
Background As an active portable ham radio operator, I am always interested in evolving my gear to support a wide variety of ham radio activities. My primary rig for portable operations is the Yaesu FT-891 and with no internal soundcard…
This little adapter let you to hold down a Anderson PowerPole connector (PP30) into the frame of a Yaesu FT-891 transceiver. This adaptor requires an insert of M3 x D4.6mm x L5.0mm insert with corresponding M3 bolt. You also need to…
I wanted a way to carry my Yaesu FT-891 and its FC-50 antenna tuner as a unit. Pretty simple design. I recommend using M4x10 screws to attach to the radio. Print this on its side with support material under the handle. PETG worked very…
This model is compatible with the lego system.
protection rails for ft891 ham radio yaesu
Reupload of the FT891 side rails designed by IU1OPK , along with a merged and longer model by mbrewha04 . There are a few remixes of this item floating around printables.com, but all have some changes that I don't really like because they…
protection rails for ft891. i didn't like the 2 piece models
print diagonally on smaller printers, 50% infill
I just needed a bracket to mount the ‘main’ part of a Yaesu FT-891 in my camper van, so I threw this one together. Radio fits fine either way. Probably best to print with PETG if in a vehicle, and the added strength will help as well.…
This model is compatible with the lego system.
When you have a tool and a component breaks, it can slow down your entire project. Even if the part is inexpensive, if you are ordering the part you still have to wait for it to be delivered. My 10" Ryobi Drill Press (DP103L) Depth…
This model is compatible with the lego system.
Realice este modelo para quienes necesitan imprimir números
Slide in Mountplate for ft-891 Display. Slides in just like on the original body of the radio. Handy snap on tool in combination with the seperation kit of the Yeasu ft-891 Print With support only on buidplate only. flatside in the…
This is side rails for the Yaesu FT891 HF radio, they should be used with 4 pieces of M4x10 screws with washers(smaller than 10mm diameter). The frame will protect the buttons on the front during field operations or transport. I recomend…
LEGO Compatible - 56891-Tire 37 x 18R
A Universal Mountplate For Yaesu FT-891. Supported mounts are often used as phone holder. You can stick them on the window. Or put it in a cup holder. You can use the original supplied screw to fix it on the FT-891
This is a replacement for the stock part 55620-89103 . It uses the original carriage for the cups and the s shaped bar. I have confirmed the design fits and the cup holder works. This design improves on the locks in the back by using…
Protective side rails for the Yaesu FT-891 with snap on front and back protective caps. I printed the rails on the edges with the top side up to minimize warping and to keep the areas that have support facing down. If the are printed flat…
Fits for Gardena garden shower type 18911-20 and 18910-20 (Front of showerhead ca. Ø58; neck ca. Ø35,5mm) Possible materials: all materials possible, Asa or Extrudr Greentec because its UV-Stable Reccomendet Nozzle-Ø: 0,4 Printable on…
The radio rail will need supports due to the bend in the handle, but the other parts should print fine without as long as you print the files with the recess oriented upwards. To print on the opposite side, mirror the arts in your slicer…
When you're out in the field, the knobs and dials are often the most vulnerable parts of the radio. The POTA-Protector adds rugged side protection and a removable front cover to help prevent damage during transport and use. The front…
This is a Yaesu FT-891 radio mount that swivels for mounting your radio in a Go Box or some other really cool place. Here are the parts needed. These are Amazon Affiliate Links. They cost you nothing, but I receive a small commission that…
I bolted the yaesu 857 faceplate bracket to this printed mount and it worked great. I've also add a file that has the standard 1" ram ball in case you opt to mount it with a ram mount system. Update March 2025: Updated file with a center…
Clip für den Sitz des W208 zur Befestigung der hinteren Verkleidung. Muss als Spiegelteil für die Gegenseite gedruckt werden.
I created a carriage stop clip and a top cap with a cord retainer. Each press fits into the teeth of the rack. This prevents pushing to deep into a part and reversing the carriage off the top of the rack. I did both when testing it out.…
This is a remix of the original Ft-891/Z100Plus Cradle
Needed/wanted protective rails for my 891. I couldn't figure out how to split the stls I found on here and elsewhere, so I designed my own. This version is the third revision. Uses three M2 brass inserts for threads and three M2x10 screws…
A Mount for the Ft 891 Digirig to attach to the Xtenna side protection rails
This print is designed to work with https://www.printables.com/model/339212-yaesu-ft-891-anderson-powerpole-adapter/. It provides an insert to the power pole adapter so that a pigtail can hang off the rear of the radio instead of putting…
Prototype, still needs some work.
I use my Yaesu FT-891 for portable operations. I designed this adapter to replace the cumbersome SO-239 with a high quality Amphenol BNC connector. Id recommend ASA, ABS, PET, or other high temp filaments. I used Amphenol part number…
A simple separation kit for my FT-891. Since I don't have a permanent QTH, I use the radio mostly in the field, and I needed something to avoid pulling all my gear out of my backpack :D In addition to the printed parts you need: 2…
A microphone mount that can be attached to 3D printed octogonal side rails , for the Yaesu FT-891. Needs 1 M3 nut and one M3 x 12 screw. Can be mounted on either side. Works with sausage fingers. I suggest printing it in the suggested…
These are mounting brackets to mount a Orion 8891 Mini 50mm Guide Scope onto the center rail of the OpenAstroTracker. It includes the camera adapter and back cover, the back brace (need two of these) and the two front braces (they can be…
Set of manpack rails for the Yaesu FT-891 based on the FT-857D rails by Haskō. Based on the model created by Haskō, modifications were made to adjust the spacing of the mounting bolts and the space for the kickstand. A strap slot has also…
This model is compatible with the lego system.
1891 NAGANT PISTOL LIGHTER SLEEVE FOR BIC LIGHTERS
Inline PTT for Yaesu FT‑891 This project describes how to build an inline Push‑to‑Talk (PTT) unit that integrates directly with a headset for field‑portable radio operation. The goal is to reduce the number of cables, adapters, and parts…
If you like my handy carry handle for the Yaesu FT-891/FC-50 combo, you might like this add-on plate that can hold an Ethernet coupler so you can quick-change between your hand mic and a headset. I used these short Ethernet cables and one…
This is for wall mounting a Foscam FI8910W Camera. I wanted to mount multiple cameras in the shop higher on the walls but not on the ceiling. I had several of the cameras that we were replacing and wanted to use these in the shop.
Táhlo ke splachovači WC, TE-4549/II-05, Slovarm 428916
I tried a few of the designs other creators made but they did not work for the hardware I had. I had the Storehouse pack of metric hardware you find at Harbor Freight. I made the ball to take the head of the bolt and the length of the…
Printa i PLA, 0.15mm quality. Välj höjd genom att alternera Z i slicern.
Hi. I've designed a holder for my newly bought Werckmann utility knife. You can find this knife in Action store or buy it online. The holster was designed to hold the knife quite tight. It won't fall off even if flipped upside down. I've…
This box allows you to use a network cable (front connector of the FT-891) and connect an external microphone and PTT. A 1/4-inch (6.3 mm) PTT connector is used for compatibility with Heil Sound Hand Switches. A 1/8-inch (3.5 mm)…
For the gate control that was always broken.
This model is compatible with the lego system.
This is side rails for the Yaesu FT891 HF radio, they should be used with 4 pieces of M4x10 screws with washers(smaller than 10mm diameter). The frame will protect the buttons on the front during field operations or transport. I recomend…
I just needed a bracket to mount the ‘main’ part of a Yaesu FT-891 in my camper van, so I threw this one together. Radio fits fine either way. Probably best to print with PETG if in a vehicle, and the added strength will help as well.…
I use my Yaesu FT-891 for portable operations. I designed this adapter to replace the cumbersome SO-239 with a high quality Amphenol BNC connector. Id recommend ASA, ABS, PET, or other high temp filaments. I used Amphenol part number…
For the gate control that was always broken.
When you're out in the field, the knobs and dials are often the most vulnerable parts of the radio. The POTA-Protector adds rugged side protection and a removable front cover to help prevent damage during transport and use. The front…
Clip für den Sitz des W208 zur Befestigung der hinteren Verkleidung. Muss als Spiegelteil für die Gegenseite gedruckt werden.
The coin return flaps on many 90's coin doors were made from plastic and the tabs that hold them in place like to break, so here's a drop-in replacement. If yours looks like this, then it'll work like butter. Will not necessarily work…
This is a reproduction of the plate that come with a Yaesu FC-50 antenna tuner. Two of them are needed to connect the FT-891 and the tuner together. The factory plates are metal and thin. This design is 3mm thick. If you want them thinner…
For years, I have used metal rails on my FT-891 and a Velcro strap to secure my LDG Z100Plus on top of it. With the way I treat my radio gear, I found the metal rails to be overkill and I didn't like the way the tuner would slide around…
I use my Yaesu FT-891 for portable operations. I designed this adapter to replace the cumbersome SO-239 with a high quality Amphenol BNC connector. Id recommend ASA, ABS, PET, or other high temp filaments. I used Amphenol part number…
I was unhappy with the rails on my FT-891 as they took up too much space in the bag, so I remixed this model to provide a more compact layout. Note that this change results in the inability to remove the head of the radio without removing…
This is a 1/25 scale model of No.100 steam tram at Museum of Transport and Technology (MOTAT) in Auckland, NZ. After uploading the No.21 tram trailer files a few months ago, I have been asked a few times to also make a model of the steam…
