42 models
8x32 LED Matrix Frame No glue*, tape or screws needed Accessible USB port Wall- or desk-mounted Snap-fit sockets for ESP-WROOM-32, MAX4466 or MAX9814 microphone and DC Power Connector for easy installation Optional socket-less version * I…
This is a modified version of this Pixel It case . It was created with the excellent Pixel It project in mind. The case has mounting points and an access port for the D1 mini, a cable path to make free-standing use easier, and optional…
This model houses a WS2812 8x32 LED matrix, an ESP32 and the necessary cables. I'm using it as a status display for my PV inverter, the ESP runs Pixelix to display the contents. Most printers are too small to print the three parts in one…
I wanted to add an OLED to my custom ergonomic keyboard, but there wasn't a great place on the case. This is a simple solution. Two versions. The original is thicker with a wider bezel. It's easier to print and work with, but a little…
This was based on the diffuser at https://www.thingiverse.com/thing:1903744. It has the same internal dimensions (10mm square grid, 9.2mm internal with 0.8mm walls between). I added added a 0.4mm layer to the top, a 0.4mm recess for the…
I want to have a led matrix to show information of my weather station. I first looked at the design from fractalnoise but one 8x32 matrix does not offer enough space. So I decide to make my own design. To have more space i make the design…
This is another IKEA Skadis pegboard with dimensions 28x32cm that is ment to be used attached to the side of other IKEA shelves that have 28cm of depth. This version is ment to be attached with double sided tape on the proper spots that…
This case was designed to fit an 8x32 LED matrix and a microcontroller in the back. There are two different case thicknesses to give you a little extra space for the hidden microcontroller. The case is designed to be a tight fit for the…
Simple case for an ESP8266 or ESP32 board (in my case NodeMCU), a temperature sensor DHT11 or DHT22 and a small SSD1306 oled screen. Works great as a small Duino-Coin IoT setup. Designed with Tinkercad. Parts need to be glued together…
I used 2 pieces diffuser from old LCD monitor. Cut to 321x81mm. You will need diffuser frame (without screen) from original project. I made mounting bracket to fasten matrix led down and also used as mounting hole for back cover. Two…
Showcase your custom pixel art, scrolling text, and dynamic animations with this sleek and versatile enclosure, designed specifically for a flexible 8x32 WS2812 RGB LED Matrix. This case provides a sleek and professional look and durable…
Print 2 of the grid parts from opaque material. Print 2 end panels and 1 center panel from translucent material. The two grid parts are connected with the center panel, then the end panels go on either end. This assembly sits down on the…
Print with tree supports from the build plate. If you want more colors, adjust the print order by objects. No need to glue anything or use screws. PLA, 0,2 layer recommended
This is a generic nut that matches the nylon nuts on the classic RC10. I printed my in PETG. You can tap afterwords or use the screw to “tap” the nut for a tighter fit.
I had a finished piece of plywood that i made to large of a hole for a 16x2 OLED I had on hand but did not work with my Adriuno programming. I had to switch to a 132x28 OLED .91 and I did not want to have to redo the plywood. So I…
An update to an earlier design with a proper ft/ftduino-compatible 6-pin connector. There' at least two versions of these things available, that's why there is a short and a long version of the top part. If you are interested in making…
Case housing ESP32, 128x32 OLED screen, TP4056 on top of ESP32 and a 1500 mAh Li-Po battery below everything.
Remix of back components to add structural strength.
LaskaKit OLED displej 128x32 0.91" I2C 3D model vývojové desky LaskaKit OLED displej 128x32 0.91" I2C Stránka produktu: https://www.laskakit.cz/laskakit-oled-displej-128x32-0-91--i--c/?variantId=14247 Github:…
Matrix corner light. I used supports only for the build plate. Print the pegs as they are, counter intuitive, but it seems to work better then other orientations. That said, I'm not your dad, do what you want ;) Pegs will clip right in,…
Print with atleast 20% infill. File down the dovetail so the product doesn't rip apart when pushed together. Modules stay in by interferencefitting.
A module for famous snap together raspberry case. Made for 3007 fan and small 128x32 lcd screen.
This is model for case ESP32 with Oled 128x32 and button
Ein einfacher Halter zum zusammenstecken für LED Matrixmit einer 8x32 Abmaßung
This is my Flat Wall Matrix segments for 8x32 Ws2812 LED Matrixes for ESP32 WLED. They just stick together in a pretty much plug and play fashion. Not too many specific instructions here, I feel its pretty self evident. but feel free to…
This is a direct edit of the “__raspi_module_1_01-SIF_OLED.stl” module from the Modular Snap Together Raspberry Pi Case , and the only things i changed is 1: I made the OLED cutout bigger to allow you to mount it forwards or backwards,…
I added an OLED since I bought OLEDs and what I thought were 40mm fans but were actually 30mm fans.
I wanted a 32x8 LED matrix display to show relevant stats of my pool on a wall near the pool to not have to rely on an app or something to view water temperature for example. However the standard 32x8 LED displays were to small for my…
Printed with TPU filament, I used Easyprint. Temps as sugested by Easyprint. 190°C Nozzeltemp 40°C bed temp Layer height 0,15mm
Storage box for five pieces OLED display with soldered pins.
This is a little spacer I designed to help assemble the "ring's" of LEDs in a 8X32 LED Light Cube Cylinder kit I bought from Banggood (affiliate link :- https://uk.banggood.com/custlink/3KGds9KBNb ) The kit came with no instructions at…
Added the slot for the top flex cable. Improved the walls for holding the LCD.
This is a cover that fits over the eyepiece of the Vortex Recce Pro HD 8x32 monocular. Why? The stock cap works well while you're carrying it on you, but if you toss it into a backpack or suitcase it will invariably pop out. The monocular…
Schlauchanschluss 8x32 zum einkleben. Praktischer Schlauchanschluss zum einkleben. Vielseitig anwendbar.
can be printed verticaly or horizontaly, model too big for most printers sadly
Bushnell 8x32 Eyecup Adjustment Ring – Replacement Part The original eyecup adjustment rings on my Bushnell 8x32 binoculars tend to crack and break over time, so I decided to reproduce the part in Fusion 360. This model is a replacement…
Forehead rest. Put thin tape on the inside of the clamps to prevent scuffing the serial number on the binoculars. I glued pleather to the part that your forehead rests against.
Printed with TPU filament, I used Easyprint. Temps as sugested by Easyprint. 190°C Nozzeltemp 40°C bed temp Layer height 0,15mm
This is a direct edit of the “__raspi_module_1_01-SIF_OLED.stl” module from the Modular Snap Together Raspberry Pi Case , and the only things i changed is 1: I made the OLED cutout bigger to allow you to mount it forwards or backwards,…
can be printed verticaly or horizontaly, model too big for most printers sadly
Added the slot for the top flex cable. Improved the walls for holding the LCD.
Print with tree supports from the build plate. If you want more colors, adjust the print order by objects. No need to glue anything or use screws. PLA, 0,2 layer recommended
