185 models
31. Dec. 2023 V1.3: Simplified the hand model to ease printing Auto 9 for “Universal grip hand” added 30. Dec. 2023 V1.2: New Helmet without visor 29. Dec. 2023: Improved the hand for easier printing Based on DUMMY 13 Beta - Oct. 2023…
This model is compatible with the lego system.
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
The Pontiac Fiero Mid-Engine Two Seat Coupe from 1987 was different from previous years due to the “Aeronose” front and rear. This particular body style was never offered from Plastic Model manufacturers. Since I own one of these cars I…
I purchased a used 997.1 this year and found the sound quality severely lacking after upgrading the old aftermarket head unit. Turns out the factory amp (ASK) had failed along with the stock woofers in the front doors. The factory woofers…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Porsche Boxster 987 convertible top transmission worm gears occasionally break due to age and/or excessive strain due to malfunctions. I have designed a replacement. Left and right gears are slightly different. Mirroring one gear in the…
Welcome to my first fully CAD designed 3D printable movie prop project - the grenade from the infamous scene in Robocop (1987) as used by Clarence Boddicker. If you have the capacity to do so, I recommend printing all parts in ABS as it…
⚫ Sonic Screwdriver 7th Doctor ⚫ It's finally here. Another sonic screwdriver this time from the Seventh Doctor. More sonic screwdrivers coming soon! ➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖ Follow me on YouTube for more info about what you can look forward for.…
Classic Playcards deck of 54 with options CARDS Standard 52-card pack, ranking AKQJT98765432 + joker Diamonds Hearts Clups Spades 2 3 4 5 6 7 8 9 10 Jack Queen King Ace Joker Use your cards wherever you want since they are waterproof when…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
This model is compatible with the lego system.
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
LOTS MORE! DeskBuddys here: DeskBuddy Collection by CheekyTomato | Printables.com 🟠 Full TMNT collection here: 1987 TNMT Collection by CheekyTomato | Printables.com Rate, 🟠like & comment! 🔧 Recommended Print Settings: • 🪶 Layer height:…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
This model is compatible with the lego system.
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Repair gear for rear wiper motor part number 98700-3e000 987003E000 For cars Kia Sorento Hyundai SantaFe 88 teeth 53.6(7) mm diameter 10mm central shaft hole 7mm side shaft hole 5.45 angle
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
LOTS MORE! DeskBuddys here: DeskBuddy Collection by CheekyTomato | Printables.com 🟠 Full TNMT collection here: 1987 TNMT Collection by CheekyTomato | Printables.com More added regularly until even the most obscure characters are included.…
Description LOTS MORE! DeskBuddys here: DeskBuddy Collection by CheekyTomato | Printables.com 🟠 Full TMNT collection here: 1987 TNMT Collection by CheekyTomato | Printables.com Rate, 🟠like & comment! 🔧 Recommended Print Settings: • 🪶…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
This model is compatible with the lego system.
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
LOTS MORE! DeskBuddys here: DeskBuddy Collection by CheekyTomato | Printables.com 🟠 Full TMNT collection here: 1987 TNMT Collection by CheekyTomato | Printables.com Rate, 🟠like & comment Inner peace doesn’t pay for pizza night! There are…
LOTS MORE! DeskBuddys here: DeskBuddy Collection by CheekyTomato | Printables.com 🟠 Full TNMT collection here: 1987 TNMT Collection by CheekyTomato | Printables.com More added regularly until even the most obscure characters are included.…
LOTS MORE! DeskBuddys here: DeskBuddy Collection by CheekyTomato | Printables.com 🟠 Full TNMT collection here: 1987 TNMT Collection by CheekyTomato | Printables.com More added regularly until even the most obscure characters are included.…
It is no secret that the factory audio system for Porsche 987's is terrible. In many cases the factory amplifier is probably dead by now for a lot of people. My amp wasn't dead, but the stereo was seriously lacking bass so I was hoping to…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
This model is compatible with the lego system.
This model is compatible with the lego system.
Needed to mount Alpine 8" woofers in the door of my 987 Boxster, So I made these…. can use M4 Sheet metal screws to mount the woofer to the adapter. Can cut the factory speaker basket to recover the plug that goes into the factory wire…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
These files are based on @GregO_280903's adapter, but bisected into two halves so they can fit on smaller printer beds. I don't take any credit for this design; he's the genius that came up with this. I just had to split it into two parts…
I designed it for my son, it's fully printable in various colors. Give it a like if you liked it, just knowing that makes me happy. I also added two holes of approximately 11mm by 1mm on the base so you can attach a neodymium magnets.…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
This was captured using a Revopoint Mini on a broken OEM trim piece and then repaired using Cloudcompare and Meshlab by cloning the opposite side and mirroring it to recreate the broken section. I created this for another individual and…
Married with Children - Buck Bundy - 1987-1997 3D printable model.
Dirty Dancing - Johnny Castle - 1987
Hello Everyone, I have designed this Cabin for my friend thomas_peat (you should definitely check out his instagram page @thomas_peat). It was designed for the RC4WD Toyota XtraCab 1987 Hardbody. The design has a "complete" version to…
This model has not been test fitted yet, I will update here when it is but side-by-side looks promising. Captured using a Revopoint Mini, the STL uploaded is significantly lower resolution as the scanned file was half a gig and didn't…
My car was missing a part and you can't get them from Porsche anymore. I put my own spin on the part and created own bracket to ensure the cabin air filter doesn't pop out of its housing. Uses the factory holes and a couple of automotive…
LOTS MORE! DeskBuddys here: DeskBuddy Collection by CheekyTomato | Printables.com 🟠 Full TMNT collection here: 1987 TNMT Collection by CheekyTomato | Printables.com Rate, 🟠like & comment! 🔧 Recommended Print Settings: • 🪶 Layer height:…
LOTS MORE! DeskBuddys here: DeskBuddy Collection by CheekyTomato | Printables.com 🟠 Full TMNT collection here: 1987 TNMT Collection by CheekyTomato | Printables.com Rate, 🟠like & comment! 🔧 Recommended Print Settings: • 🪶 Layer height:…
Print Settings Material: Polymaker CoPA or any other Nylon (Annealing is recommended) Infill: 20% Supports: Tree supports on Build Plate Only Nozzle: I used a 0.2 Nozzle for this, 0.4 may work as well but it's a pretty small model so I…
LOTS MORE! DeskBuddys here: DeskBuddy Collection by CheekyTomato | Printables.com 🟠 Full TMNT collection here: 1987 TNMT Collection by CheekyTomato | Printables.com Rate, 🟠like & comment! 🔧 Recommended Print Settings: • 🪶 Layer height:…
Married with Children - Bud Bundy (David Faustino) - 1987-1997 3D printable model.
This model is compatible with the lego system.
The Running Man - Amber Mendez (María Conchita Alonso) - 1987 3D printable model.
The Running Man - 1987 3D printable model. Super easy to print. This is a large model and will take a long time and a lot of material to print.
21 Jump Street - Officer Judy Hoffs (Holly Robinson Peete) - 1987-1991 3D printable model.
The european version was almost correct except for the top piece which obscured more of the character picture than was ideal. So I remodeled the top piece in freecad, and slightly modified the bottom piece. Ive included the STLs and…
Center latch was broken on my '87 XJ before I bought it . Designed this one off of pictures online and the pieces left. Here's another option: 84-96 Jeep Cherokee Center Console Latch by Josh Nez I haven't used this model but this…
Model with true aspect ratios. Ideal for hanging on the wall, all in one piece. 200x3mm. Collect all the CarSilhouette!
The Running Man - Fireball - 1987 3D printable model.
The Running Man - Dynamo -1987 3D printable model
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
21 Jump Street - Officer Dennis Booker (Richard Grieco) - 1987-1991 3D printable model.
21 Jump Street - Officer Tom Hanson (Johnny Depp) & Officer Doug Penhall (Peter DeLuise) - 1987-1991 3D printable model.
These are designed to replace the unobtainable MD998761 special service tools to install the camshaft oil seals for a 6G72 (Mitsubishi 3000GT, Dodge Stealth, etc…) Specifically designed from measurements taken off of original,…
Near Dark - Severen (Bill Paxton) - 1987 3D printable model.
21 Jump Street - Officer Tom Hanson (Johnny Depp) - 1987-1991 3D printable model.
The Highwayman - Dawn - 1987-1988 3D printable model.
I have created rotors for the G.I. Joe 1987 Cobra Mamba Helicopter. They can be printed as a single piece, but due to their size, I have also uploaded the piece in three parts that can be easily joined together using a dovetail joint.
The Cosby Show - Sondra Huxtable-Tibideaux (Sabrina Le Beauf) - 1987-1990 3D printable model.
Replacement of boot curtain clip for Touareg 7P OE No 7P689877345
The Highwayman - High Tech Aérospatiale SA 341 Truck - 1987-1988 3D printable model.
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Mitsubishi Pajero 1987 Wall Art Silhouette model. Adjustable size. I accept model suggestions.
Near Dark - Jesse Hooker (Lance Henriksen) - 1987 3D printable model.
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
The Cosby Show - Rudith Lillian Rudy Huxtable (Keshia Knight Pulliam) - 1987-1990 3D printable model.
The Cosby Show - Dr. Heathcliff Cliff Huxtable (Bill Cosby) - 1987-1990 3D printable model.
The Cosby Show - Denise Huxtable-Kendall (Lisa Bonet) - 1987-1990 3D printable model.
A replacement throttle cable cover for the 1987-97 Ford F-series and Bronco. It should fit 5.0l and 5.8l engines. Print it in at least ABS.
21 Jump Street - Officer Harry Truman Ioki (Dustin Nguyen) - 1987-1991 3D printable model.
The Cosby Show - Claire Olivia Hanks-Huxtable (Phylicia Rashād) - 1987-1990 3D printable model.
Prince of Darkness 3D printable model. Prints in two pieces. The large collage piece, and the name plaque. This is a very large model and takes a long time and a lot of material to print.
Part has been tested on an 87 Hardbody and appears to work well. Built with OpenSCAD, file included if you need to make any adjustments. Print Settings: Supports: Touching Buildplate Infill: 100%
The Cosby Show - Theodore Aloysius Theo Huxtable (Malcolm-Jamal Warner) - 1987-1990 3D printable model.
Hi ive added the screw lid from the original creator
