P
PrintablesLigne3D
Calamar de 9g - Squid - Petit jouet à tentacules mobiles - seulement 9g
Calamar de 9g - Squid - Petit jouet à tentacules mobiles - seulement 9g
- Downloads
- 5,080
- Likes
- 685
- Rating
- 4.84
Search results: 9g
109 models
P
Printablesplog
HC-SR04 ultrasonic sensor mount for 9G micro-servo
Currently refining a small obstacle avoiding mecanum robot for an introductory robotics club and needed a simple mount for a servo driven ultrasonic sensor. This design is a single piece print with no supports that printed quickly in PLA+…
- Downloads
- 1,738
- Likes
- 40
- Rating
- 4.5
P
PrintablesN7 Cat
9g Servo Linear Actuator (Ball Bearing)
Prints as one part, some trimming of the raft will be needed but I've added clearances around the gears to reduce trimming needed there. The intent of this is to create a relatively low cost / low backlash linear actuator using the common…
- Downloads
- 1,290
- Likes
- 173
- Rating
- 5
P
PrintablesThe_Hunter
Micro Servo SG90 9g flatmount bracket
Small bracket for mounting a SG90 9grams Servo flat against a surface with standaard screws. Recomended to print in PETG or ABS.
- Downloads
- 778
- Likes
- 35
- Rating
- 5
P
PrintablesMint
9g Servo Claw
Why? I wanted to make a claw using this model and I learned it was made originally for a laser cutter. I have spent many hours perfecting this for a 3D printing. What is needed? You can either print the Claw.stl or print the following: 4…
- Downloads
- 720
- Likes
- 48
- Rating
- 4.67
P
PrintablesGerber
Micro Robot arm (9g Micro Servo)
WARNING: this model is not perfect, many things do not fit together perfectly and require sacrifice to assemble correctly. The old part was 10 times too small. It is now fixed in the files that end with (- mm). I've also added a file with…
- Downloads
- 717
- Likes
- 75
- Rating
- 0
P
Printablespazzah
Roku Voice Remote Battery Cover (for model RCA1R, ASIN:B0BQS9Y69G)
It seems as though every Roku remote has different specs. And they are all vulnerable to breakage of the battery cover. So here is a replacement battery cover for the Roku Voice Remote, model RCA1R, ASIN:B0BQS9Y69G. I print it on my Bambu…
- Downloads
- 666
- Likes
- 29
- Rating
- 4.67
P
PrintablesCB
Fluval Flex 9G Spray Bar
This is a spray bar for the Fluval Flex 9 gallon aquarium, uses the existing loc-line flexible arms. Print flat end down, no supports. Greatly reduces water flow for shrimp and fry.
- Downloads
- 473
- Likes
- 38
- Rating
- 5
P
PrintablesKarel2003
Logitech G29G923G290G27G25 foot pedal bumper
Protects your pedal cable, preventing it from being crushed against the wall when breaking. Essential modification for those who don't have a cockpit.
- Downloads
- 434
- Likes
- 64
- Rating
- 5
P
PrintablesCF-Builds
The Z(H)ero Mouse (39g) - A Logitech G305 Lightspeed Mod
Meet the sub-40g Z(H)ero Mouse, inspired by Optimums Zero Mouse. Parts required: -Logitech G305 Lightspeed https://amzn.to/3EqIv8R -Lightweight Lithium Battery https://amzn.to/4hvylmi No additional screws/hardware required! I designed…
- Downloads
- 423
- Likes
- 65
- Rating
- 5
P
PrintablesTilleen
9G Servo Mount.
These are servo mounts for 9g servo motors. They are designed so that the armature (rotor) is close to the mount surface. The first is designed so that the armature can do a full 180 degree swing. (Double) The second is designed to take…
- Downloads
- 413
- Likes
- 27
- Rating
- 5
P
PrintablessenseBox
9g Servo Pan-Tilt-System
This 2-axis pan-tilit-system (2 axis gimbal) for 9g servos was designed for educational projects with the senseBox . It can be assembled using only 2 9g servo motors together with the screws and parts regularly shipped with them. See…
- Downloads
- 342
- Likes
- 24
- Rating
- 5
P
Printableslord_edel
Filament efficient pen tray (19g)
No supports needed. When printing on the Prusa Mini, rotate the model 45°.
- Downloads
- 330
- Likes
- 62
- Rating
- 5
P
Printableslingeswaran
Linear servo using SG90 9g servo
The hole on the gear is designed to fit the SG90 horn after trimming it so that only the circular portion remains. If needed, you can apply a small amount of super glue between the horn and the gear for a more secure fit.
- Downloads
- 285
- Likes
- 18
- Rating
- 4
P
PrintablesCodingFactoryT
9g Servo Motor Model
A simple model of a 9g Servo motor that can be used in a variety of applications Category: Models
- Downloads
- 282
- Likes
- 6
- Rating
- 0
P
PrintablesNahuel
Tower Pro 9g servo switch
For one of my projects I needed to control a switch from my remote control. Having a limit switch at home, I thought about operating it with a servo. This allows me to not worry about power issues, (as in my case, this will be controlling…
- Downloads
- 280
- Likes
- 27
- Rating
- 4
P
PrintablesTheCase
9G Servo in OpenSCAD
The popular "micro" servo, simple module in OpenSCAD for use as a placeholder in your designs. Category: Hobby
- Downloads
- 274
- Likes
- 8
- Rating
- 4
P
PrintablesRedPrints
Tower pro MG996R and Micro Servo 9g SG90
These models are free for everyone to use a guide for custom housing for your electronic needs! if you need the model in a difrent file type please leave a comment.
- Downloads
- 257
- Likes
- 10
- Rating
- 0
P
PrintablesTheCase
Mini Quadruped - optimized for 9G servos
droger's adaptation of andromeda's quadruped is awesome! I was planning on making my own design months ago. Life got in the way for a while, and BOOM, someone saved me a ton of time! A heartfelt thank you for that :) Small problem though…
- Downloads
- 229
- Likes
- 33
- Rating
- 0
P
Printableskuyongcreates
- Downloads
- 211
- Likes
- 26
- Rating
- 0
P
Printablesc-arts-modelle
Lukisegler (electric RC glider) update: Servoplate for 9g (Mini-) Servos
Lukisegler update (english): Servoplate for 9g Servos Servoplate for 9g servos (standard-mini-servos). Lukisegler update (deutsch): Servoplate für 9g Servos Servoplatte für 9g Servos (Standard-Mini-Servos).
- Downloads
- 188
- Likes
- 25
- Rating
- 0
P
PrintablesJames
9g servo (Tower Pro) replica
A model I created in Fusion 360 to replicate the physical sizes of the cheap and cheerful 9g Tower Pro servo, useful for fitting tests and prototyping. print with supports Category: Robotics
- Downloads
- 187
- Likes
- 8
- Rating
- 5
P
PrintablesNahuel
9G Servo based Universal Joint
I designed this universal joint from scratch, with the idea to use it in the shoulder / hip joints of a robot dog I´m working on. (I hope I upload that soon too). My main motivation was to get a universal joint with two DoF in one place,…
- Downloads
- 158
- Likes
- 26
- Rating
- 5
P
PrintablesBackmann3D
Snapper Mini - YA9GRA - Software and instructions
This is made to try helping others to make this fun little RobotGeek 9G robot arm. I will try to explain what is needed to build it. Program it and what pc software to use to control it. Post-Printing Part List 1x Arduino Uno…
- Downloads
- 158
- Likes
- 7
- Rating
- 0
P
PrintablesMint
9g Servo Arm
Changelog 3/06/23 Uploaded working arm photos. 3/06/23 Add Extension V2 and All V2 Why? I wanted to make a full robotic arm using servos to move it. What is needed? Depending on your resources and preferences there are 3 paths. Path 1…
- Downloads
- 157
- Likes
- 25
- Rating
- 0
P
PrintablesSP0NZ
Servo Mount Top 9g
Flanged mount for top mounting most 9g servos in foam board RC model airplanes. Makes servo replacement easy and convenient using the included servo mounting screws. Designed to be hot glued into foam board. Works with Flite Test FT9G…
- Downloads
- 152
- Likes
- 6
- Rating
- 0
P
PrintablesJarda K 66
RC Flap Mounting 9gr servo
Držák serva křidélek pro RC model větroňe
- Downloads
- 141
- Likes
- 12
- Rating
- 5
P
PrintablesJarda K 66
Flap Mounting 9gr servo (RC glider)
Držák serva 9g pro ovládání křidélek RC modelu větroně
- Downloads
- 140
- Likes
- 9
- Rating
- 0
P
PrintablesVincent
Microservo sg90 9g model
Design to simulate a microservo sg90 model with openscad code Original model here: https://github.com/vsellier/3d-models/tree/master/
- Downloads
- 137
- Likes
- 4
- Rating
- 0
P
Printableswreale
9g Servo Light Switch Flipper
Control any standard light switch with a 9g servo. The plate screws overtop any standard light switch. Attach a servo and plug it into a microcontroller like an Arduino for a fun easy project! The plate screws over most light switch…
- Downloads
- 133
- Likes
- 18
- Rating
- 0
P
Printablescclontz
N20 Motor to 9G Servo adaptor
I recently had a need for a bunch of 9g continuous rotation servos and found that I had a surplus of N20 gear motors. I designed this 2 part case to mount the N20 Motor on a 9G servo mount in a project. It may be of use to others. Please…
- Downloads
- 129
- Likes
- 16
- Rating
- 0
P
PrintablesBringItOn
9g servo model for subtraction
when subtracted from a model it will also leave holes perfect for use with the mounting screws included with most 9g servos. import to any 3d software you use
- Downloads
- 94
- Likes
- 15
- Rating
- 5
P
PrintablesAntonio Fernández Ulloa
Brazo para servo 9G
El brazo de servo de 9G es una pieza a medida para completar medidas diferentes a los suministrados en el kit del servo o sustitución de la misma medida. El usuario puede modificarla en otras a su conveniencia. Diseño original está…
- Downloads
- 93
- Likes
- 5
- Rating
- 0
P
PrintablesNotatiation
MultiClick Fidget, ONLY 9g(Print-in-Place)
MultiClick Fidget by GreenNote This is a Clicker Fidget with 3 Ribs instead of one. Print-in-Place, Only 8g of Filament! Use Default Print settings with a infill of 30-50% at a layer height no higher than 0.2(for proper Tolerances for the…
- Downloads
- 87
- Likes
- 6
- Rating
- 4
P
PrintablesT_om
9g Tower Pro or Generic Servo Mount Tray Holds Two Side By Side
Basic lightweight servo mount holding two Tower Pro (or other common 9g Generic) servos side by side. Bottom is recessed for light weight and a place for dabs of hot glue or epoxy to glue in place. Printed correctly, the servos should be…
- Downloads
- 80
- Likes
- 7
- Rating
- 0
P
PrintablesSapam
9gm Micro Servo Housing (Case) - ver 1.0
This is housing and case for 9 gm servo. Both combined weighs about 10 gm. 2 base plates are provided. One Don't have the screw holes further down and the other have the screw holes extending further down to allow longer screw and more…
- Downloads
- 79
- Likes
- 7
- Rating
- 0
P
PrintablesFichl
Babyblue Porsche Keychain - just 9g!
Use the 3mf file provieded to get a Porsche Keychain Accessory of 65mm length. Supports have been optimized, so use the settings provided in 0.12mm layer height.
- Downloads
- 73
- Likes
- 6
- Rating
- 0
P
PrintablesBackmann3D
Base for Snapper Mini - YA9GRA
I did'nt have any plate to fixate this magnificent little robotic arm to. Therefore i desided to make a base for it. The base features removable legs. So that it will take up less space when stored aside while not in use. This is also…
- Downloads
- 70
- Likes
- 6
- Rating
- 0
P
PrintablesChris Haskins
Wouxun UV9G holder
This is my first remix of any STL files. No idea if it will be perfect. I printed it out of Sunlu PETG. It uses an M4x12 bolt and an M4 nut. Happy Printing.
- Downloads
- 70
- Likes
- 6
- Rating
- 0
P
PrintablesSeanTheITGuy
9G servo mount with fairing (MG90S version)
A slight remix of a great design. The original perfectly fits the nylon gear version of the Tower Hobbies (and clones) 9g servo. However, the MG90S, metal gear, version is slightly taller and required a modification. This design allows…
- Downloads
- 68
- Likes
- 7
- Rating
- 0
P
PrintablesStuJ
Minisforum HX99G mini PC VESA mount for monitor and/or monitor arms
This case was designed specifically for mounting a Minisforum HX99G to a monitor. I use it to keep my computer close to where I use it, but this mount keeps it out of the way, and if you use it the way I do then it acts as a monitor…
- Downloads
- 67
- Likes
- 8
- Rating
- 5
P
PrintablesGuyzerr
Single Mini Servo Tray 9gram
Makes servo instillation and removal easy once the tray is glued in place. Printed with regular PLA top side flat on bed. No supports and you choose the infil. I do mine at 100%.
- Downloads
- 64
- Likes
- 4
- Rating
- 0
P
PrintablesKacikor
Bottom-Mounted Stand for Minisforum HX99G Mini PC
This is a custom 3D-printed stand designed specifically for the Minisforum HX99G mini computer. Unlike the original stand, which mounts from the back, this model is secured from the bottom using two screws. The design provides a stable…
- Downloads
- 62
- Likes
- 1
- Rating
- 0
P
PrintablesBruno S. Sônego
9g Servo Pen Plotter
Basic spring acting pen plotter to be glued or bolted in place
- Downloads
- 61
- Likes
- 7
- Rating
- 0
P
PrintablesSP0NZ
Servo Mount Double Top 9g
Flanged double mount for top mounting most 9g servos in foam board RC model airplanes. Makes servo replacement easy and convenient using the included servo mounting screws. Designed to be hot glued into foam board. Works with Flite Test…
- Downloads
- 59
- Likes
- 1
- Rating
- 0
P
Printablesmoneybunny
Simple Organizing Tray - Multi Level (ONLY 39g!)
I designed this in Fusion 360. Originally I wanted to print it in vase mode, but the model wasn't vibing with it. Therefore, I reworked the model so that the walls are only .8mm thick - meaning it only requires 1 or 2 walls depending on…
- Downloads
- 56
- Likes
- 7
- Rating
- 5
P
PrintablesBambo
HSW Amazon Kindle Paperwhite 10. Gen J9G29R holder
I created two versions of this holder. One for the reader without the case and the other for the reader with the case Printing settings layer height: 0.2mm perimeter: 4 infill: 20% cubic
- Downloads
- 52
- Likes
- 8
- Rating
- 0
P
PrintablesFX
PAN for Runcam Mini, Rotation 90° to 180° for 9G servo
Print with PETG with 0,1 layer. Use servo crews to mount cam gear and to mount gearbox on servo.
- Downloads
- 50
- Likes
- 4
- Rating
- 0
P
PrintablesStandaros
Kittenbot Geekservo 9g
I have made this precise model of Kittenbot Geekservo 9g as i needed some special cover for it, share and enjoy Category: Electronics
- Downloads
- 49
- Likes
- 0
- Rating
- 0
P
PrintablesTheFicktion
Serwo SG-90 - 9g - 1,8kg/cm - Micro servo SG90
Serwo SG-90 - 9g - 1,8kg/cm - Micro servo SG90 model for substraction from other model
- Downloads
- 46
- Likes
- 4
- Rating
- 0
P
PrintablesJlovesrc 2.0
Ultralight 2 Chanell RC plane! (only 9g!) (new version!) V5
This is a simple rc plane with only 2 motors that work for all the controll surfacess! No servos needed all you need is a small battery,two mini engines,motherboard,controler and its all! Please print this model with no infill and use…
- Downloads
- 45
- Likes
- 7
- Rating
- 0
P
PrintablesMaverickMaker
Flex 9G Lid for Fluval BT 3.0 light
I wanted to use the Fluval Nano Bluetooth 3.0 light with my Flex 9 gallon tank. So I created this lid to use with the light. The lid has openings in the back for my Co2, Air, and power lines, these are setup for the way I keep my tank.…
- Downloads
- 43
- Likes
- 2
- Rating
- 0
P
Printablesowen Harriman
Micro servo 9g 90 Degree Joint
This is a 90 Degree joint for the micro servo 9g Tower Pro this uses a 0.5mm Friction Fit to be able to hold the servos in place with expansion points designed in to allow for the use of Screws for better adhesion Designed For a Use with…
- Downloads
- 39
- Likes
- 6
- Rating
- 0
P
PrintablesEdGJr
9G Servo Housing for LEGO
After many trials of other models, this one I've found to be very effective: not only does it hold the servo tightly (with M2 screws), but it also puts the main shaft in alignment with all other holes.
- Downloads
- 39
- Likes
- 6
- Rating
- 5
P
Printablesp928s1984
Xmod Servo holder 9g replacement mount
Xmod conversion to 9g servo from stock servo. have included the servo horn to go with it. (may revise the servo horn later) Change Log: V2: cut out for the axle, slight overlook in last design V3: Arm for more stable servo V4: has tube to…
- Downloads
- 38
- Likes
- 6
- Rating
- 0
P
PrintablesSuperPilot
Tobii Adapter for Samsung CR9G
I needed an adapter to be able to get the adhesive from the Tobii eye tracker to stop falling off due to an uneven mounting surface. This fits behind the front bezzle and allows the magnetic mount to sit forward enough to keep the Tobii…
- Downloads
- 36
- Likes
- 1
- Rating
- 0
P
PrintablesProteino
29g VXE MAD R Medium G Pro X Shape for Claw Grip
The size of the shape is between the G Pro X Superlight and the G Pro 2C. The model isn't 100% perfect yet, and there are a few issues that I'll fix in a future revision. Known Issues Structure: Sometimes, when removing the supports from…
- Downloads
- 31
- Likes
- 7
- Rating
- 0
P
PrintablesPrzemysław Widłak
Land Rover Range Rover radiator flaps flap - CPLA-8W014-AA, 822.1461, C9G4A
My flaps broke after accident so I designed my own. Printed from ABS-Like Resin.
- Downloads
- 27
- Likes
- 4
- Rating
- 0
P
PrintablesTritschi
Upgrade to iPad 9Gen Holder PWR+ (iPad Air 1 to iPad 9Gen)
Getting a new iPad requires mostly new accessories, like holder. Don't throw away your old holder. Adapt it! Cut off the four bent sections, cut a 18mm wide tongue, 26mm from outer end. Crosslength shall be approx. 286mm both ways, see…
- Downloads
- 24
- Likes
- 5
- Rating
- 0
P
Printablesseanburlington
9g servo mount
A Simple Servo Mount - there are lots of this This one fits the way I needed it to
- Downloads
- 22
- Likes
- 2
- Rating
- 0
P
PrintablesLeprecon
EGPU enclosure for ADT-Link F9G oculink board
This is a remix of this model, but it is slightly taller. To make your own oculink EGPU you need: An ADT-Link F9G oculink board (aliexpress, ~30€) Oculink cable (aliexpress, ~20€) SFX PSU (50-100€) A graphics card A couple of screws…
- Downloads
- 22
- Likes
- 1
- Rating
- 0
P
PrintablesLetmeknow
9g servo adapter for Inmoov Finger starter
9g servo adapter for Inmoov Finger starter http://www.inmoov.fr/ Category: Robotics
- Downloads
- 22
- Likes
- 0
- Rating
- 0
P
PrintablesQunie
9GAG Keychain 3 Models + Bonus 9GAG earring SET :)
Several keychain models of the favorite site with the best memes, which is 9GAG ;) Bonus: Simple 9GAG earring SET . How to use Layer Change to make colored Keychains / Prints in PrusaSlicer How to ADD any Text to your STL file (keychain)…
- Downloads
- 22
- Likes
- 3
- Rating
- 0
P
PrintablesCMarroquin
Revell cement 12.9g bottle holder
Base to stop Glue Pots from falling over
- Downloads
- 21
- Likes
- 1
- Rating
- 5
P
PrintablesThomas Olsen
BitBot insert frame for a 9g servo for BitBot XL frame 2.0
This servo holder is designed to fit seamlessly into the BitBot XL Frame 2.0 , providing a sturdy and reliable base for a 9g servo. The model was created to enable new and creative projects with the BitBot. To ensure a perfect fit for the…
- Downloads
- 19
- Likes
- 1
- Rating
- 0
P
PrintablesThomas Olsen
Carousel-arm for 9g servo.
This simple rotating arm is designed to glue to a servo arm, which is then mounted on a servo placed in the Servo Insert frame . The insert fits perfectly into the BitBot XL Frame 2.0 , creating a complete setup where the bit:bot…
- Downloads
- 19
- Likes
- 1
- Rating
- 0
P
PrintablesFabian
9gag Logo
tried creating a 9gag logo for academic purposes. There's one flat and one 3D logo. Not sure if the dimensions are correct. If someone got them, give me a hint.
- Downloads
- 19
- Likes
- 2
- Rating
- 0
P
PrintablesNickeyTheBlade
Winnebago Travato Series M-59G Ram 2014 Window Clip
Just a small clip for the parents travel van, the window clip broke and pop pop was at a loss as to what to do. 3D printing to the rescue. Print With ABS OR ASA
- Downloads
- 19
- Likes
- 1
- Rating
- 0
P
PrintablesXDleader555
Axle seal install tool for Aisin 09G automatic transmission
Includes shims for varied install depths. Adapted for use with a 2in DWV pipe when installing the passenger side seal. Use some painters tape on the axial surfaces to keep the tool together. Alternative to T10176 (left) and T10177 (right)…
- Downloads
- 18
- Likes
- 4
- Rating
- 0
P
Printablesbenimars23
fluval Flex 9G Lid + feeding ring
Lid and feeding ring for the fluval flex 9g
- Downloads
- 18
- Likes
- 3
- Rating
- 0
P
Printablesengineer27
Replica of Grenadier Wizard's Room 2009G Miniature
This is a replica of figure G from the box "Wizard's Room", number 2009 from Grenadier (see http://www.dndlead.com/grenadier/ADandD/2009.jpg ) Reproduced using https://www.thingiverse.com/thing:1762299 "Thaumaturgic Circle" Intended to be…
- Downloads
- 18
- Likes
- 2
- Rating
- 0
P
PrintablesCarlo Magno
Razer Basilisk X Skeleton Mod 49g
Lightweight mod Skeleton for Razer Hiperspeed X Remix of Cam Shand https://payhip.com/b/fS3R4 Original Video: https://
- Downloads
- 18
- Likes
- 1
- Rating
- 0
P
PrintablesLayerLux3D
Terminator Iris Eyes for 9g servo and WS2812 LEDs
I'm currently working on my Version 3 of the animatronic T-800 skull. If you're interested you can download my iris system to play with it. It is designed for a WS2812 LED and 9g servo motor. Note that it is still a beta and feel free to…
- Downloads
- 18
- Likes
- 5
- Rating
- 0
P
PrintablesCrescent_Dawn
9GPG TYPE 2
Hi! This little gearbox was created as a means to get more rotation out of a standard 90 Deg 9Gram servo. I left it running back an forth for an entire 16 Hours and it still works remarkably well. I printed mine out of ASA at .2mm layer…
- Downloads
- 17
- Likes
- 3
- Rating
- 0
P
PrintablesUreleed Records
Reusable Cabel Tie (10 min/0,9g)
🧩 Reusable Cable Tie (Less than 1g of filament!) This reusable cable tie is a simple, lightweight, and super practical print for your workspace or cable management setup. It uses less than 1 gram of filament , so you can print a bunch of…
- Downloads
- 16
- Likes
- 2
- Rating
- 0
P
PrintablesAeroForge3D
Servo Mount v2 Bundle (5g + 9g)
Made for the AeroForge Sport Flyer V1, a 3D printable 900 mm RC plane: https://www.printables.com/model/1895562-sport-flyer-v1-3d-printed-rc-plane-900-mm-sport-ae Universal servo mount v2 mini bundle for RC builds. Includes 5g and 9g…
- Downloads
- 16
- Likes
- 2
- Rating
- 0
P
PrintablesMuhammed Enes Catalkaya
Vertical SG90 9g Servo Mount for RC Airplanes
Bu, standart SG90 9g mikro servolar için tasarlanmış hafif ve dayanıklı dikey yataktır. RC uçaklarda yerden tasarruf etmek ve güçlü bir bağlantı sağlamak için özel olarak optimize edilmiştir. Rc uçaklarda kullandığım sg90 lar ilk…
- Downloads
- 16
- Likes
- 1
- Rating
- 0
P
Printablescory239
9g_Micro_servo_arm_SCX24
9g Dual Servo Arm SXC24 This was originally built for scx24-snowplow-with-functional-snow-blade-model_files from printables. needed different Servo arms so came up with this version seems to work well so far. These are none splined....but…
- Downloads
- 16
- Likes
- 3
- Rating
- 0
P
PrintablesActualPepperoni
UV-9G / GT-3WP Baofeng uv9g Gopro adaptor
This here is a press fit design. The long arm allows the belt clip dongle to slide in, providing more stability. Recommend using petg as the press fit needs to flex. Ive already broken the press fit dongle due to poor layer adhesion. I am…
- Downloads
- 16
- Likes
- 4
- Rating
- 0
P
Printablesluke85s
GoPro Servo 9G Mount
Mount for GoPro like camera with tilt feature using 9G Micro Servo Motor. I've designed for generic use, in my case I've mounted it on my 3DR Iris+ UAS. The holes fits 3mm screw Printed on ShareBot NG using ABS and ASA with: ASA -…
- Downloads
- 15
- Likes
- 2
- Rating
- 0
P
PrintablesNewFatMike
Ryobi AR2079G 68 Piece Driver Kit Gridfinity Holder
Holder designed for the 68 piece Speed Load+ Driver Kit set from Ryobi . The one I have has been discontinued, but the case looks very similar to its replacement, the AR2026. Let me know if it works for you! STEP file included as well as…
- Downloads
- 15
- Likes
- 7
- Rating
- 0
P
Printablescoding Vince
Gimbal controlled with 9g servo's (work in progress)
Gimbal controlled with 9g servo's Print time ~1:40 filament used ~21g uses 3 9g servos. H:M LAY ALL PIECES FLAT SO THEY GET THE MAXIMUM STRENGTH Warning the “Gimble Final Put Together” shows you what is should look like Fully Put Together…
- Downloads
- 14
- Likes
- 3
- Rating
- 0
P
PrintablesMoritzG
Edelrid 19G to Ease conversion
a simple locking mechanism for the Edelrid 19G wiregate non-locking carabiner
- Downloads
- 14
- Likes
- 0
- Rating
- 0
P
PrintablesMartin Alvis
9g Servo Bracket for 52mm Can
Has a small setting to hold 2mm wire above the servo as I am using this to control a set of scales above the servo
- Downloads
- 12
- Likes
- 1
- Rating
- 0
P
PrintablesZirnit
9g Servo to M8 hex Adapter
just a little adapter between a 9g servo and a M8 hex bolt. Made it for a project thought I might as well share.
- Downloads
- 10
- Likes
- 1
- Rating
- 0
P
PrintablesKleinerUhu
Schnellbefestigung für 9g Microservo Tower Pro oder ähnliche 23x12mm Servos
Hier habe ich mal eine Schnellbefestigung für die kleinen 9g Microservos konstruiert, mit der auch eine liegende Montage möglich ist. Das ganze wurde auf einem Bambulab mini A1 mit Bambu Studio und den vom Werk eingegebenen…
- Downloads
- 10
- Likes
- 0
- Rating
- 0
P
PrintablesGerald Nelson
Me 109G-6 flaps 1/5 scale
I designed these based on Rumen Chakarov's FokkeRC Bf 109G-6 wood kit. I intend to use a glued carbon fiber pulltrusion rod for a hinge. WARNING!!!! I HAVE NOT FLOWN THESE YET. THESE ARE PLA PROTOTYPES! Now that that's out of the way, I'm…
- Downloads
- 9
- Likes
- 3
- Rating
- 0
P
PrintablesArthur P
Double/single servo 9g top mount
Used to fix servos 9g in RC plane model to control ailerons separately. May be used to also fix only one servo in the middle when separate control isn't needed. You can use it as universal mount.
- Downloads
- 9
- Likes
- 2
- Rating
- 0
P
PrintablesPubel
HP 39gs rubber feet
Well my Ol' Reliable graphical calculator HP 39gs that I used back in the day whilst studies at local university lost three of four its feets. I designed a new one that I printed with FlexFill 98A from Filamentum with my Prusa Mini+. You…
- Downloads
- 9
- Likes
- 1
- Rating
- 0
P
PrintablesCow Aerospace
9gram low material bed scraper
pls like & download so i can get core one
- Downloads
- 8
- Likes
- 1
- Rating
- 0
P
PrintablesJakob Gammelgaard
9g fish feeder servo mount
Designed for the small fish feeder (rotary, single servo, arduino) by robotgeek fits cheap 9g servo Category: Hobby
- Downloads
- 7
- Likes
- 0
- Rating
- 0
P
PrintablesDan
Bed Scraper (9g)
A lightweight bed scraper which only needs about 9g of filament and has a nice rounded pattern, Printing Infill: 60-70% (for strength) Layer-height: 0.16-0.2mm Supports: no Adhesion: maybe
- Downloads
- 7
- Likes
- 3
- Rating
- 0
P
PrintablesNotStonks
Aisin TF60SN / VW 09G / BMW GA6F21WA F125 Transmission Range Switch Alignment Tool
3D printable alignment tool for the multifunction switch / transmission range sensor used on Aisin TF60SN and VW 09G family automatic transmissions. Also most Mini R5x models Compatible with transmission families commonly referenced as:…
- Downloads
- 7
- Likes
- 1
- Rating
- 0
P
PrintablesfunCoolio
9GAG badge and keyring
A series of badges and key rings with the 9GAG community logo. Available in square and oval format with dimensions 40 and 60 mm. my print is red and blue but should be black and white, i have finished both black and white filament right…
- Downloads
- 7
- Likes
- 3
- Rating
- 0
P
PrintablesNotStonks
Aisin TF60SN / 09G Multi Function Switch (Transmission Range Sensor) Scan
3D scan of the external transmission range sensor / multifunction switch used on Aisin TF60SN / VW 09G family automatic transmissions. Commonly referenced as: NS639 NS520 09G 919 823 24 15 7 551 089 56038959AB Cars i know it fits…
- Downloads
- 4
- Likes
- 0
- Rating
- 0