Counting matching models…
I printed it with PLA and a layer height 0.20 in a Bambu Lab P1S. I printed it with Bambulab PEI textured plate and with a PEO hologram-ish-thingy plate to get the effect in one of the prints. hope it helps : )
Since i run a CAN setup i've remixed a mount for my EBB36 on my toolhead. I've included a PG7 gland holder so that i was able to mount it close to the toolhead and ran my umbilical wire through it. Since i currently run Tap i also made it…
Have you ever needed a fake phone? Maybe you are running a play or skit, and you need it as a prop, or you want to pull a prank on someone. Well, look no further! This prop is based on the Samsung Galaxy A14 5G, meaning it has the same…
Model of the Mitsubishi roof trim clips that fit most Lancer + Ralliart and EVO from 2008. I did print a douzain out of PC and Nylon with a 0.25mm nozzle and it worked like an original part. The price of the original part is outrageous.…
Samsung A14 smartphone-case Rigid smartphone case With raised lip (height about 1.5 mm) for a better protection of the display. Printed in TPU. Do not print in PETG or PLA! The case will not fit! Needs Supports. More 3d-printing tips on…
10/13 Added NEMA14 support. FYI NOT BEEN TESTED. 10/20 UPDATED CALIBRATION INFO 10/21 UPLOADED 5MM TO 5MM COUPLER ERCF2 Direct Drive NEMA17 Mod – Ingeniously Simple, Remarkably Effective Upgrade your ERCF V2 with this direct-drive NEMA17…
With 2 M3*4 and 2 M3*25 screws you can add close loop control to your nema motor. This model is made to respect the profile of the motor and add only 6mm behind it. Simply add a magnet to the shaft and screw this. That's it. There is…
The Nema14 depth is various, my based on stepper motor of FLSUN V400 extruder
I wanted to optimize airflow for the BD790i inside my Fractal Ridge case. Played around with different fans and found out that the big NF-A15 and - even better - the newer NF-A14x25r do fit nicely in that setup. The new one even without…
When I saw the mounting for this fan I thought someone might wanted it to fit a 140mm bracket. So here they are. Took me about an hour to model (that's included the fan) and since the 1st test worked so good, I'll not be making any other…
Improved extrusion system for Ryper Mods for MK3s or similar. Compatible with R6 extruder system and MMU2S. Ideally printed on PETG, ASA or ABS. Remember changes to your firmware: NEMA 14 steps with M92 E714 Quality current set to M907…
M3x4x4.2 - insert nut - 4 pcs
Legs printed with Inland PETG. Printed with Bambu Labs P1S.
This is a 3D Printed Fan Grill for Noctua's 140mm Fans
Mirrored version of @RedWish's EBB36 PG7 Mount behind NEMA14 stepper
I realized that not everyone is able or willing to modify BMG clone gears. This shim is a simple solution for that problem. Print it as thick as you need, usually about 0.5mm. The best part is that it can be printed in PLA! How? Because…
Automatic filament purge tool for Voron/CoreXY printers The Goose Belt Purger is a compact, modular add-on for Voron-style printers that simplifies purging during tool changes. Ideal for multi-material setups or frequent filament swaps.…
I have a 2006 Fleetwood Pace Arrow Class A RV that has this Denso brand dash climate control unit. The temp change is accomplished by a dial which then moves a cable to open and close a vent to the heat source. The clip that used to…
cnc machinable nema14 water cooling block
This is a cookie cutter for a Mercedes A140 with 60 kW (82 hp). The short wheelbase makes it very agile so they turn around way faster than other cookies and fit it almost every parking lot. Print Settings Supports: No Resolution: 0.1…
I couldn't find what I was looking for in a case for my new phone so I looked at cases for other phones and found features that I liked but that weren't designed for my phone. So I designed a phone case for my Galaxy A14 that had features…
This is a custom extruder shell designed specifically for the Neptune 4 Series , intended for users who have upgraded their extruder stepper motor (NEMA14) with an aluminum heatsink . The stock extruder cover may not provide enough…
My DeWalt DWA1450 tap and die kit came with non reusable packaging so I made a nice little case for them to fit in. Print instructions After I printed the parts I bought a tiny pack of hinges from home depot item # 19724…
Print with heat resistant Material to ensure seamless operation
Positionsrahmen zum aufkleben auf die Ladeschale. Erleichtert es blinden und anderweitig eingeschränkten Menschen die Ladestation einfacher und sicherer zu benutzen. https://m.media-amazon.com/images/I/61L+nQF9btL._AC_SX679_.jpg…
Mounts tilted between spacers from: https://github.com/chirpy2605/voron/tree/main/general/PCB_Mounts/STLs/G2SA
This model is the bezel for this wonderful monitor. Sometimes it's really hard to find one. Logo is in separate file.
This is a custom extruder shell designed specifically for the Neptune 4 Series , intended for users who have upgraded their extruder stepper motor (NEMA14) with an aluminum heatsink . The stock extruder cover may not provide enough…
140 mm fan Louqe Raw S1 top hat
How to construct a Stepper stand and design it in a CAD you can see on https://www.nerd-corner.com/solid-works-stepper-stand-nema-17//
Idea I have a Noctua NF-A14 5V PWM which came with a USB adapter cable. As I use it as a desk fan, I found the connectors quite ugly and probably a point of failure. So I made a cover which should be completely removable without damage to…
A dial indicator holder for Proxxon MF70 that screws onto the spindle shaft and uses a Noga FA1410 holder (part of Noga PH2040) to mount the indicator It shouldn't be too complex to manufacture the compliant dial holder part itself…
What is needed for assembly: 1 x DIN 912 M4x30 1 x DIN 912 M3x30 2 x spacer DIN 988 5x10x0.5 1 x insert M4x8x6 (M4xH8) 1 x insert M3x6x5 soldering iron - to add threaded inserts to model clamp - insert the spacer into the spacer…
This is a bracket for a Fluval A14772 LED strip for aquarium. The holder fits on the original Fluval Flex tank. Category: Pets
FPV_cabin_BETA1400_holder_for_CAM_EachineTX03
This filtration kit was specially designed for the Bambu Lab P2S to effectively reduce fine particles and odors emitted during 3D printing, especially when using technical filaments (ABS, ASA, Nylon, PC, etc.). The concept remains simple…
Quick hack in TinkerCad to use an LDO 10t stepper and have a loading latch.
just a simple slide vesa14 screen…. PETG is recommended with 0.2 Layer.
What is this: This is RepRapPro extruder drive redesigned to use NEMA14 stepper motor. Original version of mini extruder designed to use NEMA17 motor. It is not suitable for me because other motors on my Huxley are NEMA14. Old version of…
Mount for the POLAR DRAWBOT with additional holes for using nema14 motors. As I suspected, they are enough to drive the drawbot and I had a coupe laying around. Mirror the STL to have both sides. I also made holes in the parts I used to…
This is an adapter to mount your TLA140 and 21mm Viewfinder on your Contax G1 G2 not tested, might work too
The Dewalt DWA1450 tap and die set does not come with any way to store all the pieces so I designed this tray to keep all the parts together. Tolerances are not amazing on these parts, my M7 die is a bit bigger than the rest and fits a…
Update 11.Jan.16: added a Graber-compatible mountingbase: --> "E3D Mount Basis 30.5x30.5.stl" ############################################## Compatible bowden setup http://www.thingiverse.com/thing:800415 BOM: Hotend Lite6…
A spacer for Noctua NF-A12x25 G2 and NF-A14x25 G2 fans designed to reduce the noise when mounted on meshes and grids. In those cases, additonal noise is created by the fan blades passing close to the grid or mesh. This especially affects…
Transport cover for portable monitor Anmite 14 A140W05T My print settings: 3 perimeters 15mm brim prone to warping -> enclosure print speed 50% & stealth mode Angle 45° to print on smaller beds.
Mellow Voron 2.4 R2 Trident Stealthburner Toolhead PCB Board mount back on nema 14 (Stealthburner CW2). Mellow Voron 2.4 R2 Trident Stealthburner Toolhead PCB Board: https://s.click.aliexpress.com/e/_c3uREdHV
If you have an 27" Apple intel iMac, circa 2013 (A1419 in my case) that just won't stay tilted the way you desire, you probably know that the spring mechanism has broken. Here is a part that can permanently fix the problem. Please keep in…
A custom 3D-printed phone mount designed specifically for the Creality printer, perfect for capturing high-quality timelapses with the Samsung Galaxy A14. Whether you're showcasing intricate prints or tracking your progress, this mount is…
Simple Fan Cover for Noctua NF-A14x25 G2 LS-PWM fans to mount them into whatever surface you like.
Turn an old or cheap Samsung Galaxy A14 5G (SM-A146U, 167.7 × 78 × 9.1 mm) into a dedicated desk dashboard for Home Assistant. The phone is sealed inside: the bezel shows only the screen, nothing on the front gives away that it's a phone,…
This filtration kit was specially designed for the Bambu Lab P2S to effectively reduce fine particles and odors emitted during 3D printing, especially when using technical filaments (ABS, ASA, Nylon, PC, etc.). The concept remains simple…
This is a bracket for a Fluval A14772 LED strip for aquarium. The holder fits on the original Fluval Flex tank. Category: Pets
I couldn't find what I was looking for in a case for my new phone so I looked at cases for other phones and found features that I liked but that weren't designed for my phone. So I designed a phone case for my Galaxy A14 that had features…
Do you like to print fast and burn you electronics with way to high amperage? Well this is not the solution for you. This mod will make your electronics cool as a cucumber no matter how hard you push the printer! I didn't like the stock…
I found the integrated tripod screw on the display not practicable for home use. My solution is this stand, where the display could be installed an removed in seconds. The cables are mounted on the back. In my use case it's a third…
This spacer keeps your Mojave Grom battery from sliding around. A piece from Arrma part number ARA-1418. Fits Mojave Grom 3S. Print with flex filament for max shock absorption. To reduce weight and improve shock absorption, print with 2…
The limited original filter of the Bambu Lab H2 series prompted us to design this system with a larger HEPA 14 filter and activated carbon. Since the machine prints high-tech filaments, the risk of emissions is significant. The kit can…
Anmite 14 A140E05T Portable Monitor transport cover for cheap $30 AliExpress monitor. Make sure to use 3 outer shells and 10mm brim while printing. Prone to warping, on P1S open-top cover close door and disable Aux Fan. Make sure to angle…
Stand for a Noctua NF-A14 fan, to put on your desk! Needed hardware: - 4x M4x16 (M4x12 and larger will work as well) - 2x M3x12 (M3x14 will work too) - 2x M3x5x7 heatset insert (Voron spec) - 6x M3 washer (can be printed) The M4 bolts…
Airflow amplifier for the NF-A14x25r G2 holes are currently 5mm for bolt clearance rescaled and remixed from the official file;
Desk fan, build using 4 Noctua NF-A14 fans. Designed for "NF-A14 PWM chromax.black.swap" fans, since their short built-in cable makes wiring easy by using a few wires soldered to pin headers as extensions. Wiring the fans up neatly with…
Allows mounting Umbilical toolhead PCB on the back of your toolhead and strapping wiring with reusable ties. The advantage being that you don't need to cut and pull and cut and pull zip ties whenever you do maintaince or replacement of…
Stop the A14 smart phone from falling out, added loops to add protection, and large loops at bottom aid in holding phone out for selfies or weird angle holding for pics
If you're using a PC case fan outside of an enclosed box, you don't want to touch the blades when it's spinning. This is a hex mesh that clips onto the fan case to stop that from happening. The mesh file is for a Noctua NF-A14 fan, but it…
Samsung A14 case with customizable name tag. customizable in Tinkercad.
This is an enclusure for a Noctua NF-A14 140mm fan to be placed in the top of a lack table enclosure. I'm uploading this as it is printing out, so I hope everything works out, but thus far the top shell fits the fan perfectly. I'd like to…
