Counting matching models…
Model description The Airbus A220 (also known as the Bombardier C Series) represents the fusion of performance and technology. The A220’s advanced aerodynamics combined with the Pratt & Whitney PurePower PW1500G geared turbofan engines…
This is a reference model of the A2212 Brushless quadcopter motor. This model's not meant to be 3d printed but should hopefully save some people time designing other stuff. You can view/download the Fusion 360 project here...…
A snap-fit Samsung A22 phone case to protect the phone exterior. It is recommended to print the case on the back face. However, the underside radius form (shape) nearest to the plate is questionable. Further reducing the layer height may…
Phone case for the Samsung A22 Printed in PETG or PLA. Printable in TPU with adjusted scale-factors. (x,y: ca. 99% ; z: ca. 105%) More 3d-printing tips on my website:…
Phone case for the Samsung A22 With raised lip (height about 1.5 mm) for a better protection of the display. Compared to the original model, the case is about 1.5 mm thicker. The edge is not flush with the display. Printed in PETG or PLA.…
Update 2024-05-25 - [rear-axis - A2212]: Moved the screw hole on the axle by 1.75mm instead of .8mm to have more space between the motor screws and the gear. Update 2024-05-26 - [rear-axis may2024 update - a2212]: The original rear-axis…
mount for most typical engines like A2212 https://s.click.aliexpress.com/e/_Eu7fG6f or RS2205 https://s.click.aliexpress.com/e/_EvxsxhZ I‘ve made this because RS2205 is sold without mount, screws only PETG 100% infill weight is ~2-3g
### Mount Mount provides a channel in the middle for smooth cables placement so those do not hang around freely. To mount A2212 bldc motor use default provided screws. Surface mounting holes are ⌀4mm ### Holes placement Be aware those…
As a passionate vinyl collector, I naturally clean my records wet. It all started with a Knosti. In the long run, something more professional was needed. But since I didn't want to spend €500 or more on a more or less overpriced wet…
Print instructions: Layer Height: 0.2mm Infill: 50% Infill pattern: Honeycomb Perimeters: 3 Generate supports: Yes Auto-generated supports: Yes Hardware: 1x A2212 brushless 4x M3x8mm bolts 4x M3 washers 4x M3x15mm bolts 4x M3 nuts…
Ducted Fan which can be used for impeller Need a custom part for your setup? I design print-ready models from photos, sketches and measurements. Request a custom design Dimensions: - Axis "small" depth: 7mm - Depth: 13mm - "Small"…
This is a remix of Nikodem Bartinik's Toroidal EDF . It is designed for an A2212 motor and the fan blade has been modified to fit the included hardware. I took off the rotor from the motor to make it easier to assemble. You can find an…
Update 03/26: I added some cable clips in two designs: USB-C and Coaxial. Hey, i designed a perfect mount for the rear cam of a VIOFO A139 / A229 / T130 Dashcam. [Version for A329 Rear Camera on my Profile!] You can slide the cam in and…
Link to the Tinkercad file: https://www.tinkercad.com/things/b99GbFKmqC1-a220814t-1400kv-bldc-motor Category: Electronics
Description The gramophone horn works surprisingly well! I have attached the individual STL files of each part in the assembly, which only need a few drops of super glue to attach. In addition, the cradle may fit other Samsung phones with…
The Airbus A220 is a modern, fuel-efficient narrow-body aircraft designed for short to medium-haul routes. Originally developed by Bombardier as the CSeries, it became part of Airbus' portfolio in 2018. The A220 offers advanced…
Inspired by this sim tray , I decided to model my own for this phone since I needed one in a pinch. This model might be revised a little because it does not fit snug and is not waterproof (though I imagine no print can truly be).
Need to get your table surface clean and clutter-free? Just mount all that USB stuff under the table! For easier mounting apply some double-sided tape to the holder. Then do a test fit, and secure with two 3mm screws. To clear the cable…
This Adapter connects the Boch PSM 160 A to the Kärcher A2204. Other models might work too. If you use it for a different model, please leave a comment on which ones are compatible with the adapter. Sander side: "Bosh microfilter system”…
This took a very long time! I will be making this RC! Stay tuned!
Summary Convert your spare A2212 brushless motor into a fan for some breeze! Materials and Tools A2212 Brushless Motor, with necessary electronics to power and control the motor, such as ESC 6 * M3 x 10 screws for attaching the fan cover…
[ENG] VOLTa221 is an innovative open-source kit that combines accessibility, flexibility, and hands-on learning. Each module can be 3D printed and equipped with WAGO 221 connectors, enabling quick and reliable wiring without soldering.…
A convenient holster-style belt holder designed to fit the Gigaset A220 DECT phone. Fits belts up to 40mm wide and 5mm thick. I printed it in Prusament PLA with a 0.6mm nozzle, 0.3mm layer height, support everywhere, with 100% infill…
4x 3mm nails of 20mm length for clips 2x springs for clips - we used default springs from ender3 heatbed (20mm length, 8mm diameter, 0,9mm wire) 4x 14mm M3 screws 4x M3 nuts 15mmx0,3mm copper grounding tape for contacts 2x 150mm copper…
Had to disassemble the cabin light assembly for my car as part of an interior restoration. I noticed that the switch was starting to fall apart and managed to recreate it and replace it. Warning: This will require opening up the switch…
A2212 motor mount for control line airplane
Print standing up (holes for charger etc in the bottom). Use a raft. 15% infill. Ironing setting recommended. Made in OpenSCAD.
I printed this jet boat and wanted to use an a2212 brushless dc motor. So I designed this motor mount. The 1000kv a2212 motor is more than powerful enough to make the booat go pretty fast. Required parts: a2212 Motor (1000kv or less)…
Suzuki K6A Clutch Alignment Tool modeled for a JA22W Jimny. Printed with 3 walls and 10% infill out of PLA+. Outer diameter: 19mm Teeth: 18
I wanted to install gauge pods but wasn’t willing to drill into what is now a 40+ year-old, relatively rare part. So, I set out to recreate it. The first challenge was the A-pillar’s unique curvature along the body, which doesn’t lend…
Under desk mount for Aorus Fo32u2p power brick. Brick is sized 180mm x 80mm x 25mm
HP/Poly/Plantronics CA12CD / CA22CD Base Retainer Clips - Push in retainer clips that hold in the remote or battery. Models for the CA12CD and new CA22CD. These often break in 24/7 environments and as far as I know they don't make…
This is an Airbus A220 scale aircraft model STL, a 3d printable plane for display and diorama builds. Use it for aviation collection pieces, desk or shelf decor, scale model projects, and detailed tabletop scenes. The file is print-ready…
Got some fancy new wire cutters, only to find they derped the lock lever so wrong it doesnt close AT ALL, then amazon pulled the springed model cuz of all the returns, so i made my own lever since i REALLY wanted the spring action :)…
A2212 brushless motor holder. For better quality add more outer walls.
A simple mount for the KA2284 Power Meter board. The board snaps into place in the mount. In one of my robot builds, I use the KA2284 for modulating the brightness of LEDs based on MP3 audio, so I have the LEDs on the board wired in a…
Annular fins in theory should generate more lift in light wind conditions for less draft than a conventional fin (think of it as a low draft formula fin). Higher aspect ratio fin like this should in theory have less drag. Uploading this…
Slight mod to the part to increase strength of the holes, Brush arm assembly completed, used brass bushes and 4mm axels.
This is a turn signal auto cancel for a TA22. This 100% works on a 1974 Toyota Celica, and should be suitable for most 70s era Toyota's that use the 84310-60062 or Toyota 20-34 indicator stalk or equivalent. This includes: KE20 KE30 KE30…
A camera mount for the VIFO A229 that attaches to the rear air deflector. Highly recommend printing this in ABS or ASA to withstand the UV and high temperatures the occur inside our cars. Required hardware: 2x M3x6mm bolts for attaching…
OVERVIEW: COMMERCIAL-GRADE 1.2KG UNDERWATER THRUST FOR UNDER $15 IN PARTS Building an Autonomous Underwater Vehicle (AUV), Remotely Operated Vehicle (ROV), or Unmanned Surface Vessel (USV) usually means spending $200+ per thruster on…
This kit is designed to replace the ageing plastic bushings that make up the 1st gen RX-7 wiper assembly. It currently contains the mounts where the linkage mounts to the body under the front windshield and the larger round socket for the…
Hey, i upgraded my Dashcam to a VIOFO A329 and now the original design doesnt fit anymore. So i re-designed the clip with a mount for the new rear cam. Use the Mount file from the original design. Now you can screw the Dashcam directly to…
front for a foamboard plane
grgfggdg for me
Alpine A220 is a scale model STL for 3D printing of a real civilian sports car, made for automotive display and diorama builds. This 3d printable car model is ideal for collectors, model makers, desk display, and custom presentation…
Stand for the Rigol PLA2216 Logic Analyzer Optimized airflow position for effective cooling Printed with PETG Layer: 0,2mm Infill 15%, Gyroid No Support
This removable mount attaches to the rear wind deflector in your Mazda MX5 Miata. You can easily remove the camera and mount and take it with you when parking with the top down to help prevent casual theft. Line the slot with a couple of…
this is an aditional protection layer for your A22
The motor sits on a ball-bearing rocker arm that transfers the thrust through a single steel ball onto a 2 kg load cell. This keeps the force path defined and free of side loads. All parts print without supports. Additional parts for the…
This 3D model is a custom mounting bracket and enclosure designed to integrate a standard A2212 brushless outrunner motor into a 1/10 scale radio-controlled (RC) vehicle chassis. JPG The design securely houses the motor while providing…
Update 03/26: I added some cable clips in two designs: USB-C and Coaxial. Hey, i designed a perfect mount for the rear cam of a VIOFO A139 / A229 / T130 Dashcam. [Version for A329 Rear Camera on my Profile!] You can slide the cam in and…
This kit is designed to replace the ageing plastic bushings that make up the 1st gen RX-7 wiper assembly. It currently contains the mounts where the linkage mounts to the body under the front windshield and the larger round socket for the…
A2212 brushless motor holder. For better quality add more outer walls.
This is a remix of Nikodem Bartinik's Toroidal EDF . It is designed for an A2212 motor and the fan blade has been modified to fit the included hardware. I took off the rotor from the motor to make it easier to assemble. You can find an…
This removable mount attaches to the rear wind deflector in your Mazda MX5 Miata. You can easily remove the camera and mount and take it with you when parking with the top down to help prevent casual theft. Line the slot with a couple of…
This is a turn signal auto cancel for a TA22. This 100% works on a 1974 Toyota Celica, and should be suitable for most 70s era Toyota's that use the 84310-60062 or Toyota 20-34 indicator stalk or equivalent. This includes: KE20 KE30 KE30…
Materiale pa66+cf20 riempimento al 100% in alternativa qualsiasi nylon con fibra di carbonio, per le altre impostazioni di stampa fare riferimento al tipo di filamento utilizzato.
VIOFO A229 rear camera mount for a Toyota Sienna. Print with PETG, on its side, with supports.
Rear hub caps for a JA22W Suzuki JImny. There is an optional inlay for letters and out circle if you want to do a multicolor print. Highly recommend printing these out of ASA to withhold to the heat and UV.
JA22W Suzuki Jimny vent retainer clips to replace missing or broken clips.
Front camera mount for Viofo A229 Pro and Viofo A329 Pro Dashcam Obviously it has no GPS or power electronics. Just a simple mount for use in rentals for example. Print in a material that doesn't easily warp in a heated car. I used ASA,…
I remixed the plate to move the power socket to the one side, resized to fit belkow power soctek and added mounts for 5 way WAGO 221 for power distribution. https://www.amazon.co.uk/dp/B098K32L4B?psc=1&ref=ppx_yo2ov_dt_b_product_details
I have modified the cable emtry hole with a slot so i can pass 4 way connectors through
A Samsung A22 phone case to protect the phone exterior printed in TPU that fits neatly around the phone chassis A small amount of glue was applied to the satin finish build plate for adhesion purposes. No support material was used.…
Funda para samsung galaxy a22 con un agujero para agregar un coso para agarrarlo con el dedo
