Counting matching models…
Originally published here: Samsung Galaxy A31 a315 case by tato_713 - Thingiverse Thanks to Theo Schinca , who helped me testing this case. Some of the models are designed for rigid materials and others for flexible ones. The models…
Renault Alpine A310 1600 VE aka. Misato Katsuragis car
I am converting a passive subwoofer to active, and so got this amplifier from amazon: https://smile.amazon.com/gp/product/B01N5DGK37/ It comes as a bare board, so I needed a case, this is it. The first run fit pretty well, I had to use a…
Uses the screws and spacers that came with the amplifier board kit. Steps to assemble: 1. First prepare the top part by fastening the spacers with 4 screws on it. 2. Place the board into the bottom of the enclosure 3. Slide the top part…
I have designed a drop-in replacement of the Arrma outcast drive shaft (ARA311065) I think it is a stronger design as it is not hollow and is cheap to make if you have a 3D printer. I have tested it on multiple materials and layer…
Replica of the original part BM51-A31066-A Is not 100 percent equal, but the holds much better Please only print with ABS or PETG or materials that will not bend at higher temperatures. I printed with ABS, Layer 0.12, speed 80mm / s…
Case for TPA3116 amplifier. Tight fit around the board. Check board layout before considering printing, I have seen lot's of different layouts. Board is secured by 4 M3x8 screws. Photos show PLA print of 0.2mm with thin wall and bridge…
This amplifier case is specifically designed for the SANWU SW-HF183 VL1 (TPA 3116) digital Bluetooth amplifier. Note that I only left the speaker and power terminals “open”, so you cannot reach the USB port, micro SD card slot or the…
I found it strange that a blower style card wouldn't have skeletonized back bracket so I made one add tree supports and have fun
i got a cheap 2.1 CHN cheap amp with the TPA3116 and i needed a secure case for it.
The Airbus A318 is the smallest member of the Airbus A320 family, designed for short to medium-haul routes. It first entered service in 2003 and seats between 107 and 132 passengers, depending on the seating configuration. With its…
2-part enclosure to house and mount a A3144 hall sensor. I printed with 50% infill in PETG. For cable I used 5mm microphone cable.
You have to bend the thing in half to sick it in there, what are you gonna do? It fits nice and snugly, so much that I didn't even need to line up the M3 screw holes. pokemon font!!!! you'll probably want to attach a fan somehow if you…
this is a casing vor the TPA3116D2 (AOSHIKE 8-25V 100W TPA3116 NE5532) amplifier. this is a lowpass mono amplifier for subwoofers. More information: https://www.youtube.com/watch?v=SO96JDnXoRg (not my video) where i bought the product…
I made this to fit a Sparkle Intel ARC A310 GPU into my Lenovo M920q, but it should fit into any Lenovo Tiny form factor PC that has a PCIe slot. You'll need some supports for the Mini DisplayPort cutouts if you don't use the included 3mf…
I made a model of the TPA3116 2x50W and 1x100W Audio Amplifier because there are no 3d models of this amplifier and i wanted to design a case for it before I had orderd it. NOTE: THIS MODEL IS NOT ON POINT ACCURATE! Link to buy the…
Réparation des charnières des platines JVC L-A55, L-A31 ou L-A11 des années 1979 et 1980
simple case for cheap TPA3116D2 2x120W class D amp board
Enclosure for chiniese bought subwoofer amplifier, I have designed it to be glued together, once put together, box have no openings for wires or any type of plugs, as that can be drilled if anyone have specific needs as per that.…
A little case designed for this TPA3116 amplifier board. There are many versions, I have the one pictured and this fits like a glove. I've uploaded the step file for easy tweaks if your board is a little different. Looks nice with the…
updated to V2 to add additional clearance for audio jacks which were deeper than I guessed. I took jbebels remix of the Customizable Box and added the ability to have a second PCB. I also added in soe extra ventilation to the top panel. I…
I really liked the original but since the bottom of an Asus A31 Plus case is sloped 8° it would cause problems. I sloped the bottom of the model and added 2 sqaure pegs that fits into the mesh on the bottom of the case so the support…
Tool for rubber instalation which is holding passenger oxygen panel and light tube panel. Tool is very usefull for line maintenance as smaller tool than pizza roller. Tool is NOT certified by EASA or any other agency.
Remplacement des charnières des platines JVC L-A55, L-A31 ou L-A11 des années 1979 et 1980
Battery Hold Down Strap for Losi XXX-T Stadium Truck. I couldn't find this one so I designed it in FreeCad. I made two different lengths because I don't have a Losi XXX-T. Someone told me the length, but there seems to be some confusion…
Sparkle A310 ECO — 40 mm Noctua Fan Mod The Sparkle A310 ECO has one of the noisiest, highest‑pitched GPU fans I have encountered. After researching some fixes, the easiest solution seems to be replacing the stock fan with a 40 mm Noctua,…
Simple case for a cheap TPA3116DA mono 150w class D amplifier board
This is a holder for a smartphone instead of the original Elegoo screen. With an open Klipper operating system, the Elegoo display no longer works. You can install Klipper Screen and turn your Android smartphone into a Klipper Screen.…
Pocket sized mono amp with TPA3118 board and usb c pd input. Parts: 3 M3x6mm 4 M3x10mm 1 M4x5mm TPA3118 board ZY12PDN Stereo Jack (Like this: https://www.amazon.com/Ancable-5-Pack-3-5mm-Stereo-Headphones/dp/B07JNC4P7Y/) resistors for…
I could not find a case that suited my needs so i made my own. Not perfect but does what it needs to do. Protecting my mini amplifier and making sure the heat can get out. Printed with PETG, 15% infill at 0.2
Case for one of the inexpensive "class d" amplifiers from ebay Bluetooth 4.0 TPA3116D2 120W x 2 Wireless Audio Receiver Digital Amplifier Board. board is best secured with a drop of hot glue in each corner of the bottom half of the case.…
Introduction The CR-10 format control box is just an ugly nuisance. There's no way to manage the wires well without a lot of effort. It's noisy and takes up a lot of room. Thingiverse and the CR-10 Facebook groups are full of great…
A TPA3118 amplifier board case including all electronics needed to use it on AC with an 3,5mm auxiliary connection and bookshelf speakers. I have used the following parts to build this project; 8x M3x10mm Screws 2x 24V TPA3118 Mono…
Housing for DollaTek TPA3116 speaker amplifier with 2*50W speaker connection and 1*100W subwoofer connection. For assembly inert the five button in the respective holes. If available you can add spring beforehand. Use two plastic feet for…
A screw fixing for the Lama SA315B Helicopter wall art. The art is held 4mm from the wall for extra dramatic effect. Link to the helicopter wall art: https://www.printables.com/model/716473-lama-sa-315b-helicopter-wallart I used two small…
This is a replacement for the hard drive door on the ThinkPad A30/A30p/A31/A31p.
Enclosure for sub woofer Amplifier, there is slight play vertically, I am mounting mine upside down so i gave it a bit of horizontal play. Works either way, mounted right side up or upside down update. Split into top and bottom files got…
TPA3110D2 Bluetooth Amplifier enclosure. I added connector terminals to the board, had to bend the wires of the terminal block wider for the middle power terminal. Added a second design for when you solder the wires to the board and did…
Enclosure for TPA3116 Bluetooth amplifier board You need to print 5 of the button pins. Use a brim to stop warping of the top and bottom enclosure, and for the button pins as it is very small. Note 1: Clean the 5 holes for the button pins…
Print with tree supports along the openings for clean results. 4 or 5 walls to prevent infill. 0.2mm layer height. 0.4 Nozzle. Prints in ~1hr on Bambu A1 Mini set to 100mm/s max speed. Thx to incognito2pt for original design!
XH-M543 (TPA3116D2) case for mounting under desk. Power through XT30-M connector You can use 2 inserts m3 with 4mm length, or just melt 2 plastic pins I used a minijack 3.5 mm female this type:
Caja para amplificador XH-M422 basado en el chip TPA3116D2. Permite conexión por bluetooth, puerto microSD y USB. Como se ve en la foto, he usado dos viejos altavoces creative que tenía guardados por casa. Material necesario: circuito…
The Airbus A310 is a twin-engine, wide-body jet airliner developed by Airbus and introduced in the early 1980s. Designed as a shorter, more efficient derivative of the A300, it offered improved range and fuel economy, making it popular…
Cockpit file for "Airliner toy set inspired by Airbus A318" with extra details.
Enclosure for my audio power amplifier based around the Tpa3116d2. You can find pcb details and download here: http://www.maj.pavlin.si/ Category: Audio
I upgraded my old Logitech Z-5300e 5.1 surround speakers on my computer to the Klipsch Black Reference Theater 5.1 Surround Sound System. However, since these were going on a computer, the 1/8" AUX Audio jacks on the motherboard were not…
Alpine A310 stl is a detailed scale model of a civilian vehicle for 3d printing, made for car diorama and model car collections. You get a 3d printable vehicle model that looks great on a shelf, in a tabletop scene, or as part of a custom…
Just a super simple underneath desk mount for the BRZHiFi mini amplifier. There are many mini amplifiers manufactured in China that are the same dimensions, so this mount probably fits many of these also. Requires 4x small screws to mount…
Back Cover for Samsung SM-A310F The original back cover is made out of glass and there is a high likelihood for ruining it when you try to replace the battery. This plate is a pretty good replacement for the original. I used the rounded…
Alpine A310 as a 3D Model. This design can be scaled to any size in your slicer. Print flat with ~5% infill to save material. Perfect as decoration. Category: Signs & Logos
This design is available under CC BY-NC-SA 4.0 for non-commercial use. The board is this one. You can also find it in many other places.…
Cable routing clips for the AVerMedia BA311 Live Streamer mic arm. Supports any round/circular/tubular mic arm with a diameter of ~30mm.
Introducing FARCT - a Fan ARC Thingy For Sparkle ARC A310 and A380 (heatsink swap) You'll need to remove the heat sink one time get the stock shroud off - replacing thermal paste is recommended. Your new shroud can be installed and…
Designed for the enclosure of our Guinea pigs, this camera holder fits the blurams A31 camera. The holder can tilt up/down and left/right to find the perfect angle for the camera. Post-Printing Requirements To complete the holder you need…
This adapter is just for fun and experiments: it makes it possible to hook up a 1995 mobile, the Ericson GA318 to an external power supply.
Made a shelf for the industrial board of AXIOMTEK
Its a Remix from EatMoreTronxy , the left cover has the wrong size... this should be fit. Category: 3D Printing
Housing for the 100W Bluetooth 5.1 TPA3116D2 Mono Bt Audio Power Amplifier (link at bottom). The design is pretty simplistic, the amp slides in from behind. The two holes are for the volume knob and the AUX port. The openings in the back…
I made this to fit a Sparkle Intel ARC A310 GPU into my Lenovo M920q, but it should fit into any Lenovo Tiny form factor PC that has a PCIe slot. This is the second version of the mount with better airflow and no supports needed. I've…
I got my hands on an old passive amplifier, not good enough to warrant buying a >100€ amp, but not bad enough to throw away. I found a TMA3116 mono subwoofer board online for cheap (~10€) which I could power with one of the many old…
Made a shelf for the industrial board of AXIOMTEK
Introducing FARCT - a Fan ARC Thingy For Sparkle ARC A310 and A380 (heatsink swap) You'll need to remove the heat sink one time get the stock shroud off - replacing thermal paste is recommended. Your new shroud can be installed and…
Ein Gehäuse für die Platine TPA3110. Nach dem ich die gängigen Portale nach einem Gehäuse durchsucht und keins gefunden hatte, hab ich mir kurzerhand selbst eines gezeichnet. Es werden noch Schrauben gebraucht. Die Bohrung im Gehäuse ist…
I made this to protect it from being shorted out. I used standard barrel jacks for the audio out as I had it on hand and makes connections really easy. The fan just friction fits in place and it's decently snug.
