Counting matching models…
A friend wanted his own case for the new Samsung Galaxy A33, so I was happy to model and print it for him. After two iterations it was done. He wanted this "beam" ornament. But you can create your own . In the files you will also find the…
A320/A330 131VU panel NO PCB NEEDED! This panel do not need any PCB as it has the unique “Button Base” panel for easily insert and attach buttons, switches, rotary, potentiometers and encoders. Important Note: While this panel can…
Passionate about aviation and aircraft engineering, I couldn’t imagine not modeling the Airbus Beluga XL (A330-743L) — one of the most iconic cargo planes in the world, instantly recognizable with its unique “smiling” design. The model is…
I needed a tpu case/cover for a Samsung galaxy A33 for a family member so I made one. supports are built in to the larger opening, just need to cut them away once printed. Enjoy
A320/A330 ATC MSG panel NO PCB NEEDED! This panel do not need any PCB as it has the unique “Button Base” panel for easily insert and attach buttons, switches, rotary, potentiometers and encoders. Can be connected to 131VU panel which can…
Print with 0.2 mm layer height Hardware parts: M3 heatset inserts M3 screws 10mm diameter tube a compression spring (100mm long) a tension spring (20 mm long) LM8UU linear bearing LM8UU linear rod (60mm)
Preferred printing at 0.1mm steps using any colour ABS or PLA. Print at 100% infill given its a relatively small component and the strength that a 100% infill provides, is required. The knob attaches via a 3.4mm hole that needs to be…
Realistic Copy of the Airbus A330-300 Comes with: Colored Airplane (No splitting) Non Colored Airplane (No Splitting) Non Colored Airplane (With splitting) Layer height: 0.2 mm (0.12 mm for sharper surface detail) Infill: 10–15% (display…
The Airbus Beluga XL is a specialized cargo aircraft designed to transport oversized components, primarily for Airbus' own aircraft production. Introduced in 2019, it is based on the Airbus A330 platform and features an enlarged fuselage…
Samsung Galaxy A33 Groot case
The Airbus A330 is a wide-body, twin-engine jet airliner developed by Airbus. It made its first flight in 1992 and is widely used for medium to long-haul flights. Known for its fuel efficiency and comfort, the A330 is popular with…
I 3D scanned this Arrma part and edited the holes a bit so it's printable. It is a little bit rough on the surface. The printed one is on the left. It fits without any problems, screw holes are a bit tight but it won't strip your screw…
über likes makes und follower würde ich mich sehr freuen, Peace MazZe
This part is 3D scanned and edited to be printable. It is a little bit rough on the surface. The right one with the pivot ball screwed in is printed. There are 2 different versions. One with the thread for the Pivot Ball, and depending on…
This is a V2 of my protoype which needed more manual corrections. This one you can directly fit on car. I used and tested with PETG material and had very good results.. Print Settings Printer Brand: Creality Printer: Ender 5 Rafts: Yes…
I created a replacement Arrma 223S Shock Rod End (ARA330666) for my 1/8 223S Typhon. Looks like this will fit most Arrma 223S and 3S models, but check website for compatibility. I had to modify the original design to be more additive…
BOSE PRO FLIGHT 2 A330/A350 VERSION
I'm working on a new boombox project and needed to make a basic model of the amplifier to ensure it will fit inside an enclosure. Overall dimensions are accurate at 155mmX90mm but placement of knobs and inputs is only about 99% accurate.…
The Airbus A330 MRTT (Multi Role Tanker Transport) is a military aircraft based on the Airbus A330 passenger plane. It is designed to perform several missions, including aerial refueling, cargo transport, and medical evacuation. The…
Slightly adjusted Oliver Xie's PS4 controller iPhone mini mount design to fit the Samsung Galaxy A33 in a silicone case.
Prints flat, with tabs bent into place. Couldn't get satisfactory results on models that were printed fully "3D". I recommend printing in basically any solid filament besides PLA, partially for temp resistance and partially because PLA…
Steering Link for Arrma Quake, Gorgon, Fury, and 2WD Vorteks. Equivalent to Arrma part ARA330753. You'll need to print it with support and at least 6 wall loops.
This 1:200 model can be used to add more functionality to your models, and it can be printed on a ender 3. Print the wheels with an axel one at a time, with no other things, and print the wheels with a hole separately, both of them For…
This is a reversible end cap for the POTA33H antenna mast. Threads were added to both sides so a spike can be stored inside the mast when not in use. This is to keep the base from kicking out when guy'd. This WILL NOT keep the mast up…
This is a tray designed to be installed on the stand of an LG 27EA33 monitor. You need to print the STL file provided and the same file mirrored. You will then need to glue them together. Support is not needed. This object main web page…
a phone stand did for A33
Passionate about aviation and aircraft engineering, I couldn’t imagine not modeling the Airbus Beluga XL (A330-743L) — one of the most iconic cargo planes in the world, instantly recognizable with its unique “smiling” design. The model is…
I created a replacement Arrma 223S Shock Rod End (ARA330666) for my 1/8 223S Typhon. Looks like this will fit most Arrma 223S and 3S models, but check website for compatibility. I had to modify the original design to be more additive…
The Airbus A320neo family is an incremental development of the A320 family of narrow-body airliners produced by Airbus. The A320neo family is based on the enhanced variant of the previous generation A319, A320, and A321, which was then…
This is a reversible end cap for the POTA33H antenna mast. Threads were added to both sides so a spike can be stored inside the mast when not in use. This is to keep the base from kicking out when guy'd. This WILL NOT keep the mast up…
My power button broke off and went down the drain so I made this one. It works for me so it should work for you. You might want to enable a brim and/or slow down print speed to support adhesion. I printed mine on a 0.2mm nozzle with 0.04…
The Airbus A330-900neo is a modern, fuel-efficient wide-body aircraft developed by Airbus. It is part of the A330neo family, which stands for "New Engine Option," and features advanced Rolls-Royce Trent 7000 engines. Designed for…
The Airbus A320neo family is an incremental development of the A320 family of narrow-body airliners produced by Airbus. The A320neo family is based on the enhanced variant of the previous generation A319, A320, and A321, which was then…
This is a simple mount allowing you to mount the POTA33H carbon fiber mast to a square hitch bar. The bar that I use is from the Harbor Freight bed bed extender. It is approximately 50mm square, and the opening in the print is 50.6mm…
This is an accessory holder for the Gigaparts POTA33H mast. The 3/8 inch ground rod that is used to anchor the base of the POTA33H does not have a storage location so I designed these tubes that strap to the outside of the POTA33H. This…
A330-900 landing gear for 1:200 scale model. Original model :
A330-900 landing gear for 1:200 scale model. Original model :
This is a combination GoPro and Tripod adapter for the JeVois A33 camera. It was designed to be used with https://www.printables.com/model/326547-gopro-compatible-mount-for-v-slot-20x20mm-extrusio to mount the camera to 20x20mm V-Slot…
