70,959 models
HUGE UPDATE 9/13/2024: Dummy 13 v1.0 is now available! Check out the new and improved version of Dummy 13 here. This page will keep the previous beta files to ensure that no one's remixes are broken. Dummy 13 uses a CC BY 4.0 license!…
Print approx. €0.96–€1.17 excl. taxPreliminary estimate for PETGSource material: PET
Lucky 13 is now on a CC BY 4.0 license! This means that you are free to share these files however you like, including selling prints, provided that you give proper attribution. You can give proper attribution by including this notice on…
Print approx. €7.79–€9.52 excl. taxPreliminary estimate for PETGSource material: PET
All printable parts for your Original Prusa i3 MK3S+ Sorted by kit assembly manual chapters. You can use the file list and folder structure here to prepare parts in the same order as you will need them according to the guide. Attention,…
Print approx. €0.21–€0.26 excl. taxPreliminary estimate for PETGSource material: PET
A portable cable organizer which is setup as an easy print-in-place and includes a knob on the side for conveniently winding up the cable when you're ready to pack it away. This model is an easy print that requires no supports, and three…
Print approx. €2.76–€3.37 excl. taxPreliminary estimate for one variant
Customizable and now also stackable beer crate for all types of batteries: The AA-crate can hold 12 Batteries The AAA-crate can hold 20 Batteries The 9V-crate can hold 5 Batteries The 18650-crate can hold 6 Batteries but is 18mm higher…
Print approx. €2.04–€2.49 excl. taxPreliminary estimate for one variant
Chances are you’ve heard about ocarinas thanks to the Nintendo game The Legend of Zelda: Ocarina of Time, whereas the name suggests, it plays an important role. Print this one in Blue and use to Triforce collar to make it look like the…
Print approx. €2.88–€3.52 excl. taxPreliminary estimate for one variant
Mini 13 is now on a CC BY 4.0 license! This means that you are free to share these files however you like, including selling prints, provided that you give proper attribution. You can give proper attribution by including this notice on…
Print approx. €0.35–€0.43 excl. taxPreliminary estimate for one variant
This phone/tablet stand is designed to be as universal as possible, print in place, and fold flat while being very durable. It comes in 3 sizes. Each variant is designed around its specific load. Small - 52x83x3mm - About the size of a…
Print approx. €0.94–€1.15 excl. taxPreliminary estimate for one variant
UPDATE! GET THE NEW VERSION HERE -Charger Cable Organizer 2nd edition- Due to many not reading the print instructions i've now put the instructions on top of the descriptions. PLEASE READ BEFORE PRINTING!! " Print instructions: Version 1…
Print approx. €0.65–€0.80 excl. taxPreliminary estimate for one variant
The Solder Scroll makes soldering more ergonomic by allowing you to just scroll on the pen shaped tool to add solder. By rotating the knob, the tool can be adjusted to accomodate different diameters of soldering wire (0.3 - 1.5mm). A…
Print approx. €1.48–€1.80 excl. taxPreliminary estimate for one variant
Get the latest version here → Charger Cable Organizer final edition -- THE CABLE WINDER II -- This design is an updated and improved version of my popular design “ Charger Cable Organizer ” Thanks to all that posted feedback and makes of…
Print approx. €1.26–€1.54 excl. taxPreliminary estimate for one variant
Follow the Mikolas Zuza's tutorial article on: https://www.prusaprinters.org/cheap-simple-3d-printer-enclosure/ Plexiglass dimensions: 3pcs: 440 x 440 mm, thickness 3mm 2pcs: 220 x 440 mm, thickness 3mm If you have a 3D printer with MMU2S…
Print approx. €1.42–€1.73 excl. taxPreliminary estimate for PETGSource material: PET
The source marked this model as adult content.
Print approx. €3.32–€4.05 excl. taxPreliminary estimate for one variant
All printable parts for your Original Prusa MK4 and Original Prusa MK3.9. MK4/MK3.9 upgrade Stage 1: Read the manual first! Don't disassemble the printer for now, follow the instructions provided in the manual. Original Prusa MK4 assembly…
Print approx. €1.38–€1.68 excl. taxPreliminary estimate for PETGSource material: PET
This is a helper for cable soldering. Exchanged to a faster to print design and attached CAD file. Update 16.04.2023: As requested I added a chamfered version of the model. Thanks and Credits to the originator of this print: mistertech…
Print approx. €0.42–€0.51 excl. taxPreliminary estimate for one variant
a strong cable wall hook with material thrift. PETG 4 outer layer 30% infill
Print approx. €3.69–€4.52 excl. taxPreliminary estimate for one variant
Design Update The red clip shown on the right side of the second image is the KLIPPT Locking Cable Clip, which succeeds this earlier KLAMMA model. KLIPPT introduces a separate, versatile base plate that enables multiple mounting options,…
Print approx. €2.39–€2.93 excl. taxPreliminary estimate for PETGSource material: PET
About this model Say hello to Carbon 13, the latest generation of 3D printable action figures. Carbon 13 introduces a hybrid joint system that preserves the dynamic range of articulation you expect from the 13 series while freeing up…
Print approx. €0.33–€0.40 excl. taxPreliminary estimate for PETGSource material: PET
You'll find all the build instructions and links for components in the article: https://blog.prusa3d.com/the-prusacaster-how-to-design-and-3d-print-an-electric-guitar_71962/ Overview of the multiple pieces: Hardware Made to work perfectly…
Print approx. €0.45–€0.55 excl. taxPreliminary estimate for PETGSource material: PET
V2 ( screw mount ) https://www.printables.com/model/1160799-universal-cable-holder-v2 Tested with Petg
Print approx. €0.30–€0.37 excl. taxPreliminary estimate for one variant
Easy 13 is now on a CC BY 4.0 license! This means that you are free to share these files however you like, including selling prints, provided that you give proper attribution. You can give proper attribution by including this notice on…
Print approx. €0.88–€1.08 excl. taxPreliminary estimate for one variant
If you don't have a 3D-printer you can buy a set of 3 pcs printed here → Buy it here! The cable organizer is designed to fit all standard USB type cables with a diameter of 3-5mm. 2 slots for 2mm cable. 2 slots for 3mm cable. 2 slots for…
Print approx. €0.38–€0.47 excl. taxPreliminary estimate for one variant
Tested with Petg V2: Added a wider base for extra holes and a better tape adhesion
Print approx. €0.34–€0.42 excl. taxPreliminary estimate for one variant
Description All printable parts for your Original Prusa MK4S and Original Prusa MK3.9S. Print instructions Download the latest PrusaSlicer and use the following settings**: Print settings: 0.20mm STRUCTURAL Filament: PETG (tested on…
Print approx. €1.87–€2.29 excl. taxPreliminary estimate for PETGSource material: PET
Intro Opening parcels should be quick, easy and safe. This ergonomic parcel opener is designed to effortlessly cut through packing tape and cardboard without using a blade. The hook-style tip slides under the tape and cleanly slices it…
Print approx. €0.41–€0.50 excl. taxPreliminary estimate for one variant
History of the miniature vice This is the completely reworked version 2.0 of my very popular miniature vise, which is much easier to assemble now. Around Christmas 2020, I had published the first version of my miniature vise here:…
Print approx. €4.29–€5.25 excl. taxPreliminary estimate for PETGSource material: PET
All printable parts for upgrading your MK3S to MK3S+ Attention, y-rod-holder is present 4 times in the printer. If you plan to print the whole upgrade, print this part 4x. Look for a number in the brackets in the file description. the…
Print approx. €1.30–€1.59 excl. taxPreliminary estimate for PETGSource material: PET
V2 : increase of the mecanical play of the axis to avoid that the two parts are welded during printing. Improved closure. Just change the dimension in fusion 360 to resize it.
Print approx. €0.42–€0.51 excl. taxPreliminary estimate for one variant
Author: Prusa Research (Vlado Turek)
Print approx. €0.52–€0.63 excl. taxPreliminary estimate for one variant
Probably the most popular filament sample on Printables comes with a set of storage boxes in various sizes, 100% printable! I designed the box so that you don't need any additional parts, no screws, no magnets. There are two different…
Print approx. €10.56–€12.91 excl. taxPreliminary estimate for one variant
All printable parts for your Original Prusa XL . The parts are divided into folders based on subassemblies. Print instructions ATTENTION: Two materials (PETG and Polycarbonate) are recommended for the printable parts. Read the following…
Print approx. €5.83–€7.12 excl. taxPreliminary estimate for PETGSource material: PET
All printable parts for your Original Prusa Enclosure . The parts are divided into folders as they arrive in the multiple bags from the factory. In file others you can find part needed for the Silver PSU. All of the add-ons and community…
Print approx. €8.02–€9.80 excl. taxPreliminary estimate for PETGSource material: PET
About this model Say hello to Carbon 13, the latest generation of 3D printable action figures. Carbon 13 introduces a hybrid joint system that preserves the dynamic range of articulation you expect from the 13 series while freeing up…
Print approx. €0.30–€0.37 excl. taxPreliminary estimate for PETGSource material: PET
Folding hook. Size 40x60x13mm (without cover) 48x24x13 (with cover) My print settings Material: PETG Layer height: 0.15mm Perimeters: 6 Orientation of the hook on the bed: Side Supports: No Updated (added) Added alternative cover mounted…
Print approx. €0.53–€0.64 excl. taxPreliminary estimate for PETGSource material: PET
👇 Click the image below to explore my other 3D printable models. ✨ I prefer print with PETG filament. Z mount connection Z mount slepení Glue the two parts of the Z mount. The top edge must be lined up. Alternatively, you can sand it. To…
Print approx. €0.53–€0.64 excl. taxPreliminary estimate for one variant
Updates: (04.12.2022) Added versions for the screw and nut with more tolerance. Tablet and Notebook Stand Looking for something to spice up your home office? This laptopstand will become your new holding assistant. It supports lightweight…
Print approx. €5.50–€6.73 excl. taxPreliminary estimate for one variant
The charging cable always breaks at the same position, just right under the plug. Don't replace it, Repair it with this easy print! This works for Apple USBC and lightning, as well as for samsung charging cables! No glue or tape is…
Print approx. €0.04–€0.05 excl. taxPreliminary estimate for one variant
Print instructions Download the latest PrusaSlicer and use the following settings**: Print settings: 0.20mm STRUCTUAL Filament: PETG, PC and PCCF (tested on Prusament) 15% Grid infill ** Note that print settings are recommended, but you…
Print approx. €1.30–€1.59 excl. taxPreliminary estimate for PETGSource material: PET
Now you can buy a printed one at: https://trajann.com/collections/fandesign with special Black Friday discount code"BF25OFF" Updated20231109 Someone suggested designing a new one for the baby, so I made a new one, just scale the length,…
Print approx. €3.40–€4.16 excl. taxPreliminary estimate for one variant
Cruiser USS St. Louis No supports needed Little to no glue Dozens of details & elements In-game St.Louis cruiser included World of Warships and Printables have joined forces to bring one of the most detailed models of a famous naval…
Print approx. €0.11–€0.14 excl. taxPreliminary estimate for one variant
This is an stand for an latop iPad and an e-book with al hexagonal pattern. There is also a solid version if you prefer a cleaner look. If you want to modify it to fit perfectly on your devices follow these steps. Measure the width of…
Print approx. €7.95–€9.71 excl. taxPreliminary estimate for one variant
Keep your loose cables tidy. Slicing Tips: Try to orient the main part so the first layer of bridging is as short a distance as possible. Orient the cable wrap part so there is no need for bridging. Other Sizes: Cable Keeper Medium:…
Print approx. €0.47–€0.58 excl. taxPreliminary estimate for one variant
All printable parts for your Basic Board + PSU Add-on. Basic Board + PSU Add-on is needed only if you have Advanced Filtration System or/and White LED Strip Add-ons You have the option to print two different holders for two different…
Print approx. €1.04–€1.27 excl. taxPreliminary estimate for PETGSource material: PET
Closed feet height = 50 mm Extended feet height = 80 mm Tested with PLA: 0,15 layer height; 15% infill => 75+kg load per feet was no problem :)
Print approx. €0.89–€1.09 excl. taxPreliminary estimate for one variant
All printable parts for upgrading your MK3 to MK3S+ sorted by upgrade manual chapters. Attention, y-rod-holder is present 4 times in the printer. If you plan to print the whole upgrade, print this part 4x. Look for a number in the…
Print approx. €1.29–€1.58 excl. taxPreliminary estimate for PETGSource material: PET
Foldable phone stand: easy to print and easy to assemble
Print approx. €2.84–€3.47 excl. taxPreliminary estimate for one variant
Small table clamp intended to workshop. Perfect for small object, or 3D print objects grinding.
Print approx. €22.81–€27.88 excl. taxPreliminary estimate for one variant
Simple but very usefull cable organizer for your cables. I was inspired by other clips in database but all clips are unsatisfying for me. For ex.: 1) Too big spaces and cables leave the clip. 2) Too long clip and unnecessary wasted…
Print approx. €0.23–€0.28 excl. taxPreliminary estimate for PETGSource material: PET
All printable parts for your Original Prusa MK3.5(S). MK3.5(S) upgrade Stage 1: Read the manual first! Don't disassemble the printer for now, follow the instructions provided in the manual. Original Prusa MK3.5 assembly manual Original…
Print approx. €6.22–€7.61 excl. taxPreliminary estimate for PETGSource material: PET
The Heatbed Cable on my MK3 was starting to sag and catch on the frame of the printer. So not wanting to pull it all apart I made a simple clip on support that does not require any tools or disassembly to fit. There is also a version for…
Print approx. €0.53–€0.65 excl. taxPreliminary estimate for PETGSource material: PET
The orange Gyro 7 in the pictures is printed in 0.20mm layer height Printing Material: PETG (PLA makes the joints too loose when using the normal skeleton and too tight for the tight Skeleton . Assembly is also more difficult in PLA.)…
Print approx. €1.63–€1.99 excl. taxPreliminary estimate for PETGSource material: PET
This model is designed to utilize the last few meters of your filament spool to create a useful cable tie! My idea for the contest was I wanted something that would always be useful every time you printed it, and I've been wanting to try…
Print approx. €0.12–€0.14 excl. taxPreliminary estimate for one variant
This Project is Outdated! For the latest Revisions check out: Stackable Storage Boxes – 2024 Update The following description is no longer updated: Discover my specially designed storage boxes, meticulously optimized for 3D printing.…
Print approx. €8.99–€10.99 excl. taxPreliminary estimate for one variant
Tested in PETG, recommended to print in PETG
Print approx. €0.52–€0.63 excl. taxPreliminary estimate for one variant
This model is a remix of the original “Catch-All Trays / Desk organizer” model. It is fully compatible with this remixing model and it can also be stacked on top of the original remixed model. The containers are in sizes 5x5 / 5x10 / 5x15…
Print approx. €0.52–€0.63 excl. taxPreliminary estimate for one variant
My design of the cable holder for the Ender 3 S1. The cable does not bend in one place and fits nicely. It does not limit the maximum print height. Easy printing only one forced support. If you like my work, please support me with a…
Print approx. €0.86–€1.05 excl. taxPreliminary estimate for one variant
Philips Fixables. 3D printed parts for fresh starts. Need a new comb to fit your Philips OneBlade? Print yours now. Trim and style your beard, just the way you like it. About Philips Fixables Fixables is a collection of 3D printable spare…
Print approx. €0.21–€0.25 excl. taxPreliminary estimate for one variant
Poseable hands for Dummy13. You will need the fingers from Alioth's poseable Lucky 13 hands. They are currently scaled for 500%, but should function down to about 200% (40% of this model size) scale if your printer is dialed in. If you're…
Print approx. €0.59–€0.73 excl. taxPreliminary estimate for one variant
I seen the contest: last meters to make good use of the last meters you have. So i thought lets do something. im not a designer, but i wanted to make something to minimize plastic waste and make something useful. i made some small cable…
Print approx. €0.05–€0.06 excl. taxPreliminary estimate for one variant
Support me & Buy a T-shirt Sizes All three sizes are fitted for the Original Prusa i3 MK2/2.5/3/4 3D printer. Small size - 245x205x80 mm Medium size - 245x205x150 mm Large size - 245x205x220 mm Only small size is equiped with front…
Print approx. €1.02–€1.24 excl. taxPreliminary estimate for one variant
Update 19-Nov-2024 : Added IL version Update 02-Apr-2024 : Added CZ version A removable trolley coin for EU/US/CA/AU/UK/CZ/PL/IL carts. This allows you to remove the coin after unlocking the trolley for your shopping. Although there are…
Print approx. €0.09–€0.12 excl. taxPreliminary estimate for one variant
Windmill - 100% printable - no support - no bearings - low friction - video Complete printable windmill which is easy to assemble and expandable with other parts. You need a screwdriver for assembling? Dimensions Length 127 mm Diameter…
Print approx. €0.14–€0.18 excl. taxPreliminary estimate for PETGSource material: PET
Stackable and now also with labels: beer crate for batterie and accumulator storage. The AA-crate can hold 12 Batteries The AAA-crate can hold 20 Batteries These crates are to 100% compatible to my original files. The Bottom is universal,…
Print approx. €4.61–€5.63 excl. taxPreliminary estimate for one variant
I had old utility blades with no usage laying around until I found this awesome design . I thought a few improvements could be made, so I changed the design a bit and added “grippy” features and “clicky” flexures. You can find a video of…
Print approx. €2.38–€2.91 excl. taxPreliminary estimate for PETGSource material: PET
Clamp X motor cable sleeve (with zip tie) to this and protect cable against mechanical constraints. Points cable down and slightly back.
Print approx. €0.36–€0.44 excl. taxPreliminary estimate for PETGSource material: PET
Simple painter pyramids to elevate your workpiece while painting, gluing, or finishing. Designed for stability and minimal contact with the surface, these pyramids help prevent smudges and ensure even drying. Easy to print and stackable…
Print approx. €0.31–€0.38 excl. taxPreliminary estimate for one variant
A cable clip for the LCD cables. Should be a nice tight fit and hold them very securely. Jan 21 - Added an upsized version. The original was supposed to move relatively freely, then be held in place by the cables. The upsized one should…
Print approx. €0.49–€0.60 excl. taxPreliminary estimate for one variant
Hinged Cable Clips V2 Make cable management fun, seriously! These cable clips offer refined improvements over the original Hinged Cable Clip design with much stronger latching and easier release. How does it work you ask? A redesigned…
Print approx. €0.44–€0.54 excl. taxPreliminary estimate for PETGSource material: PET
I decided to have some fun with the Soap Dish challenge, and design something that hit both the form and function while being incredibly easy to print - and I like how it turned out enough that I'm going to use this in my own home! I…
Print approx. €2.08–€2.55 excl. taxPreliminary estimate for one variant
Dock. Charge. Tidy. A charging stand with built-in storage for excess cable — for a tidy desk or bedside table. Tidy cable storage inside the dock. Size-specific versions for your Apple Watch. Easy to print without supports. Choose your…
Print approx. €3.28–€4.00 excl. taxPreliminary estimate for one variant
Cable organizer updated version with locking system that allows for more effective organization Assembly instructions, insert ring into slots.
Print approx. €10.03–€12.26 excl. taxPreliminary estimate for one variant
What and why? Since i have been asked about my other design of cable glands if it could be available in other sizes, I thought about in and designed a parametric model. This didn't take long. Exporting the stl for all sizes was a bit…
Print approx. €0.58–€0.71 excl. taxPreliminary estimate for one variant
I do a reasonable amount of flying for work and it has always been a pain holding or propping up my phone so I can watch movies. I tried some low-tech methods over the years but this design is my current solution. I got inspiration for…
Print approx. €2.87–€3.50 excl. taxPreliminary estimate for one variant
***UPDATE*** I've had a couple of suggestions come in (thank you @Roman_1037762!) that I'd like to implement over the next couple of days. The first of which is a clockwise flow for folks south of the Equator. Or maybe you just have a…
Print approx. €11.13–€13.60 excl. taxPreliminary estimate for one variant
This is a little stackable Storage Box. You can print it with the draft setting and it works just fine. There are two types, one stackable, one non stackable. They are nearly identical. Hope you have fun printing and can use it!
Print approx. €11.25–€13.75 excl. taxPreliminary estimate for one variant
I designed this heatbed cable cover, because the ones available were designed to complex and too far off the original design. I needed an angled cable cover to reduce the length of the printer, so I can fit it inside an IKEA Platsa…
Print approx. €0.51–€0.63 excl. taxPreliminary estimate for PETGSource material: PET
Update: Extra hole for screw mounting ( d = 3 mm )
Print approx. €0.13–€0.16 excl. taxPreliminary estimate for one variant
01 - Summary A simple reusable tie fastener to organise cables and other long objects. It features 1-12 holes with lengths 40-205mm for great versatility. Unlike other cable ties, this puts ease of use first, with a simple fastening and…
Print approx. €0.07–€0.08 excl. taxPreliminary estimate for one variant
This modular scraper is designed especially for 3D printer bed cleaning – perfect for removing filament residue, glue, or adhesion products from the build surface. It can be used with a standard Stanley blade or with various 3D‑printed…
Print approx. €3.02–€3.70 excl. taxPreliminary estimate for one variant
This is a cable reel for storing your cable quickly and in a compact manner. Just center it on your cable,wind it up and you're ready to go. When you need to use your cable, just pull the cable from both ends until you have the length you…
Print approx. €0.93–€1.14 excl. taxPreliminary estimate for one variant
2020-Dec-29: Deleted rubbish. Update the version with bigger mash and smaller front to prevent hittig the leadscrew 2020-April-06: Added new version with much smaller mash - only 0.4mm thick - to pretend hitting the leadscrew at homing…
Print approx. €0.40–€0.49 excl. taxPreliminary estimate for PETGSource material: PET
After a lot of prototyping now my final version. KEY FEATURES lightweight for traveling cables up to 6mm in original size /small one 4mm cable big radius to protect cable from breaking wheel design to see the cable snap in design for easy…
Print approx. €1.39–€1.70 excl. taxPreliminary estimate for one variant
Recently I designed a very rugged Tablet Stand for a Tradeshow booth that used quite a bit of unique hardware. After posting the design on Reddit and getting feedback, I decided to try and duplicate the design without using any hardware…
Print approx. €10.61–€12.96 excl. taxPreliminary estimate for one variant
Intro Earbuds Cleaning Tool V2 is a small, easy-to-print earwax remover tool for in-ear headphones and earbuds . It helps you safely remove earwax, dust and debris from your earbuds without damaging the speaker mesh . The first version…
Print approx. €0.10–€0.12 excl. taxPreliminary estimate for one variant
You can donate here: https://www.paypal.com/donate/?hosted_button_id=BTTC6BR69RRAL I like the original model, but the access to the stored parts was not ideal. That's why I added a bevel to the lower part, which increased the space and…
Print approx. €5.87–€7.18 excl. taxPreliminary estimate for one variant
Update: Print in place hinge, better snap, better opening handle Print orientation: side
Print approx. €0.57–€0.70 excl. taxPreliminary estimate for one variant
Tried to adjust the Z-mount and the 90 degree extruder so that another chain can be attached in X-direction. Unfortunately I only had the STL files available, so there might be small errors in the mesh. Didn't want to re-model the model…
Print approx. €1.05–€1.29 excl. taxPreliminary estimate for one variant
The source marked this model as adult content.
Print approx. €4.63–€5.66 excl. taxPreliminary estimate for one variant
Ice Scraper for Car – Durable Winter Tool This sturdy ice scraper is designed to clear frozen car windows quickly and efficiently. Its ergonomic handle with a reinforced grid structure ensures strength while saving material. The wide…
Print approx. €1.94–€2.38 excl. taxPreliminary estimate for one variant
Electric Cable mounts, mounted using screws D=3mm or double sided tape. Parametric using the STEP file :)
Print approx. €0.17–€0.20 excl. taxPreliminary estimate for one variant
A useful tool for removing prints from the bed with interchangeable 3D printable blades for when one eventually wears out. You can print the body in either PLA or PETG, however for the blade PLA is highly reccomended. To install the…
Print approx. €0.17–€0.20 excl. taxPreliminary estimate for one variant
Knurled Modular Threaded Stackable Container. 100mm outside diameter. 20mm, 40mm, & 60mm side wall height containers (with bottom) and expanders (without bottom). Top and bottom can be used to make a 40mm tall container. 3mm walls. Print…
Print approx. €8.19–€10.01 excl. taxPreliminary estimate for PETGSource material: PET
Updates description at the bottom Overview A model of a variable pitch propeller mechanism based on a 1935 patent by Robert Stanley, adapted for 3D-printing. Variable pitch propellers allow the pilot of an airplane to adapt the angle of…
Print approx. €0.09–€0.12 excl. taxPreliminary estimate for one variant
Update 10.02.2024: Added a version with removable grid. Two tolerances available: - norm: Normal tight fit - loose: 0.4mm tolerance Use this with the body file. Update 18.01.2023: Removed name tag on 1st layer. All coasters can now be…
Print approx. €2.49–€3.05 excl. taxPreliminary estimate for one variant
Unstable fusion360 source file It seems like a recent F360 update broke the model file. Since it is not the first time, I'm in the process of ditching Fusion360 from my workflow altogether. I'm learning FreeCAD and will attempt a redesign…
Print approx. €1.51–€1.85 excl. taxPreliminary estimate for one variant
Quick clamp replacement or saving money the choice is yours. if any clamps/clips Designs to be made let me know I'm all ears. Best to print in PETG for Strength an Flexibility Screw holes are 4mm (cable clips are 3mm) 2mm thick for no…
Print approx. €0.21–€0.26 excl. taxPreliminary estimate for PETGSource material: PET
Please take a moment to like this project and download it from Printables - it really helps me out! Thank you Today we’re making some of these awesome customisable desktop neon signs. These ones can be powered by either a USB cable or 4 x…
Print approx. €0.08–€0.10 excl. taxPreliminary estimate for one variant
Electric Cable mounts, mounted using screws D=3mm or double sided tape. Perfect for multiple cables or bundles :)
Print approx. €0.26–€0.32 excl. taxPreliminary estimate for one variant
A lockable contour gauge to copy/measure arbitrary shapes by pushing the blades against the desired shape and locking the gauge. The shape of the gauge can then e.g. be photographed and uploaded into a 3D CAD program. I used this for…
Print approx. €0.21–€0.26 excl. taxPreliminary estimate for one variant
*UPDATED the screw thread Adjustable self-watering spike for indoor and outdoor use. By using a plastic bottle you can provide the garden plants with an adjustable drip irrigation system. By turning the valve you can adjust and control…
Print approx. €2.64–€3.23 excl. taxPreliminary estimate for PETGSource material: PET
![Cable Repair and Protect for iPhone and Samsung [lightning+usbc]](https://media.printables.com/media/prints/590112/images/4827822_b916b887-676b-4723-b0c9-90881c40951e_31bb8182-a7ba-4745-adfd-b9d44646baac/195cfe9b-40fc-4570-b695-c540798fc979.jpeg)
