Counting matching models…
This is a remix of "The HIVE" from Thingiverse. I printed out "The HIVE" but the connection was too loose for me. For this reason, I created a new model with 0,2mm tolerance and add different sizes and inserts. Print instructions 0,3 mm…
Section 3: Catalogue of Significant Artifacts from Sector Ulysses, Site 23 3.7 Artifact VN-07-SU-23: Elaborately Carved Phallic Effigy Recovery Context: Artifact VN-07-SU-23 was recovered from Stratum III-b within Sector Ulysses, Site 23.…
Above Ground Pipeline! Everyone needs a pipeline, now and again. Be it your wargame, diorama, a scenic vista you are trying to create, or a hardcore game of 40K! Well, here's a cheap and dirty set of above-ground pipelines. Ready to pump…
I wanted to use some other PCIe Cards with my ZimaBoard Single Board Computer, but in order to use any card, you need to remove the mounting bracket. As there isn't a standard for where the screw holes will be on a PCIe card for the…
Please note this design should be considered a BETA , I'm still making some tweaks for the following: Improve all hangers to make latching less stiff Improvements to PCIe hanger. Modular 3U Rackmount for ZimaBoards , to be co-located with…
If you enjoy this bracket, please consider making a donation to familybikeride.org. I made this bracket to help families get on an affordable bike that can conveniently haul their family. Please donate what you feel is fair to our group:…
Double-sided roundabout switching rail compatible with BRIO and IKEA wooden rails. Printable without supports. Complete extended set contains: Straight Tracks Medium Straight Track - A Short Straight Track - A1 Mini Straight Track - A2…
Double-sided roundabout switching rail compatible with BRIO and IKEA wooden rails. Printable without supports. Complete extended set contains: Straight Tracks Medium Straight Track - A Short Straight Track - A1 Mini Straight Track - A2…
Adapter für Kärcher-Sauger WD-Modelle https://www.printables.com/de/model/251437-karcher-wd-vacuum-cleaner-adaptor Adapter für Kärcher Sauger alte Pro-Modelle: https://www.printables.com/de/model/251475-karcher-wd-pro-vacuum-cleaner-adaptor
Dual fishing rod holder for a Radwagon 4 caboose. The caboose has 2 sets of 3 holes for the side rails. This rod holder is designed to fit on any of the holes on either side. If you use the side rails on the caboose you can attach them…
Sehr praktische Aufbewahrungsbox für den Metabo MWB 100 /MFT. Die Box passt in die T-Schienen und kann durch die beiden Klemmen ganz einfach und ohne Werkzeug angebracht oder verschoben werden. Für die Montage der Klemmen an der Box…
Wanted to make a little gift for a friend of mine that is excellent at BBQ :) So made this little Warning sign, He was very happy for it. It was made as a multicolor design with each color seperated into layers for easy assignment in the…
Por la forma distinta del montaje de la Genius a la Sidewinder. Hice este portabobinas simple a base de los existentes para los que tienen la genius como yo.
It's a replacement barrier for the Lillabo (IKEA) wooden train level crossing. The original (red) barriers break quite easily. These aren't much sturdier (it has two pins either side, one of them has a small diameter, so can't really…
Este tapón sirve para esta botella: Ya que una vez abierta, ese desechable. Imprimiendo este tapón tenemos la posibilidad de seguir utilizando la botella.
Kurzes Rohr mit Düse zum Abtrocknen von Autos - Mit Bumper um nicht versehentlich den Lack zu zerkratzen. Wird wie das Original mit der roten Taste verriegelt. Es gibt jeweils Dateien für einen 2 color Druck als auch einfarbig. Der Bumper…
DEU Einfacher Getränkehalter für die metabo MWB 100. Kann ohne Werkzeug mit der Klemme schnell und einfach in der T-Nutschiene versetzt werden. Ohne Supports druckbar. Für die Montage werden 2x M3 16 und 1x M3 12 und 3x M3 Muttern…
I put the Aperture Laboratories Logo on the Topper. This is made in Fusion 360.
(english below) Wandhalterung für Messkabel (BNC, Bananenstecker, Schuko-/Eurostecker, etc.) für Werkstatt und E-Labor mit Stauraum für Zubehör. Gedruckt werden kann das Modell aus verschiedenen festen Filamenten - ich habe PETG…
Vymodeloval jsem si box na diabolky a broky který se dá na opasek, bylo to z toho důvodu že když jsem střílel, tak mě nebavilo si pořád chodit pro střelivo a takhle je to hezky při ruce, tak se to snad bude hodit i někomu dalšímu. Boxy co…
Pele : 1958 alifabolaget Pele #635 Meh - so'so Playing card to 3d Plaque experiment. Upscaled trading card pic in img2img Stable Diffusion tiled depth in tilezoedepth google colab use depth for displacment use upscaled pic for displacment
Tiskl jsem v PLA výška vrstvy 0,13 segmenty 3 a hustota 18 bez podpěr..
Fits around the bottom of the feet - it is a tight fit. I would recommend that you print just the top cup portion first to try and test fitment, since the entire print uses a lot of filament. Infill is printed at double line width for…
Verschlusskappe, damit bei abgezogenem Saugschlauch kein Staub austreten kann. Die TPU Dichtung muss bei jedem Drucker angepasst werden, somit geht hier auch jeder andere Staubsauger. Ersatzweise kann für die Dichtung auch ein Filzring…
Het is altijd moeilijk op uw rug onder de lavabo of wastafel te liggen om die moeilijk te bereiken moer los te maken. Daarom heb ik deze pijpsleutels zelf afgedrukt, in de maten m13, m12, m11, m10, m9, m8. Ook een verlengstuk dat je kan…
Een kartonnen theedoosje ontvouwen en geprint met een persoonlijk tekst erop. Een cadeau doosje. Je kan het maar 1 keer gebruiken om dat het materiaal te dun is. Als je de kanten plooit op de lijnen moet je voorzichtig zijn dat je niet te…
Card Slinger 3.0 for MTG / ManaBox App- Easily scan in bulk quantities of cards by hand - Now for sleeved and un-sleeved cards You MUST print the base and insert in transparent or white filament, it will not work properly otherwise.…
Once printed work gradually to break free the joints and make the box unfold-able Mini Version included. Print instructions Use Print thin walls feature in PrusaSlicer design for 0.20mm layer height
Status: Released! Compatibility Warning! PCBv3.1 and PCBv4 (with onboard STM32 chip) are the only compatible PCBs. PCBv3 (which uses the WeAct BlackPill) is not compatible and should use the Protective Housing . Description This housing…
This housing holds the GaggiaBoard V3 (PCBv3, PCBv3.1, or PCBv4) from the Gaggiuino project, with maximum coverage to protect from a potential water leak. Design intent is for the board/housing to go in the corner vertically behind the…
You must REALLY hate all that extra filament laying around to be looking at these.. The chassis take about a kg to print, and the drawers, feet, and hats take another like 600g. On the bright side though it all fits in a 200x200 footprint…
Are you annoyed that the perfect holder for you doesn't exist? Well, now you can assemble it yourself based on what you need. Not anything more, not anything less. This organizer is based on blocks you can slide into each other to form…
Print Z=0,2 perimeter=5 infill=50
UPDATE May25-2023: Added additional files for printing main canister portion on smaller printers. Split canister sections also have 3mm holes to help with alignment during assembly. This is a full sized printable model of an M829A1. The…
Organizador de cabos 3 a 5 slots.
Create a Naboo Starfighter! If you like this model, please throw me a like. Designing the models is time, filament and coffee consuming. If you want to support my work bye me a coffee (PayPal). Thanks! Check out my other models.…
An aboleth perfect for your tabletop game! Want to access even more models not found here in Prusa Printers? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here:…
This is a model that has been remodeled from a previously manufactured sand scoop into a 130mm form. There is a slight difference between the modeling in the drawing and the printed photo, but after printing it was modified to slightly…
Simple stand for the ZimaBoard that can accommodate two 2.5" drives based on the rack mounted module I have created. It is available in two variant: Original ( zimaboard-hdd-stand.stl ): which can accommodate up to two 9.5 mm high 2.5"…
The Parabolic Wave Grid Panel #1 features an intricate parabolic wave pattern, created by extruding squares at varying heights. This versatile design looks incredible in various finishes, including tricolor filament, color-shift pigments,…
I needed to store my battery somewhere and did not find a good mount for Metabo 18V Batterys. There is a single and a double mount. The same lid is used for both. The battery is hold in place by small flaps. Snap the base and the lid…
Flexible rails for IKEA LILLABO, BRIO, LIDL train track Flexible rails which help to easily build the train track compatible with IKEA LILLABO, BRIO, LIDL The difference of this rails is the end - sometimes you need male-male of…
Comme ma nièces à tendance à perdre les pièces, voila des pièces de rechange du célébre jeu "Docteur Maboul" (Operation en anglais). on peut imprimer tous d'un coup ou chaque pièce séparement: -Pomme d'Adam -Os de vœux -Cœur brisé -Os…
Simple stand for the ZimaBoard that can accommodate two 3.5" drives based on the ZimaBoard Dual HDD Stand created by orax . Assembly You need unscrew and remove the lower plastic plate from your ZimaBoard and reuse the screw to mount it…
3 versions lite full frame (only)
https://www.buymeacoffee.com/maxt ---------------------- 3D print with 5 different houses that can be placed in a window. You have the possibility to change the houses and rotate them in whatever way you please. The houses can also…
Cup holder for Bugaboo butterfly, but should fit also onto another ones with same "button-like mount" Print as is, no support needed. Material: PETG / ABS
Description Keep your cleaning spray bottles organized and easily accessible with this simple and practical 3D-printable Cabinet Door Spray Bottle Holder . I designed this model and printed the prototype using Bambu Lab ABS filament . The…
A clip for mounting Bugaboo Cup holder or other accessories to your Fox, Donkey, Chameleon and Bee. Remodeled from the original, since ours broke. Confirmed working for Donkey and Fox. Use supports from buildplate. the small nubs on the…
I have created better back cover of the cables going out of the heatbed used for PRUSA BOX. The original one has unsufficient space inside for the cables to be placed comfortably. My upgrade cover is almost of the same size, but the…
The Parabolic Spike Mini Version translates the geometric design of the original Parabolic Spike into a smaller, faster-to-print form. This scaled-down version retains the sharp, stepped pyramid-like structure and the grid of squares…
First, many thanks to Romain for inspiring this remix. My grandsons only know full speed and sometimes stop. So, the yellow caution lamp was replaced with a sliding shutter, exposing either the red or green ‘lamp’. Gravity reared its ugly…
Diabolo Box oder Schüttelbox für Diabolos 4,5mm im Kaliber .177. Druck ohne Support, Nozzle 0,4mm, Laye 0,2mm, Infill 30% PLA + von Sunlu. Nach dem Druck mehrmals rein und raus schieben, dann geht es leichter.
Modular 1U Rackmount for ZimaBoards , to be co-located with Raspberry Pi and OpenUPS2. The design provides 5 “slots” to make up the 19" rack, which can be made from a combination of single and double-width holders which are secured…
Taboo is a Ta ckle Bo x/ O rganizer designed to prevent spills. UPDATED for 2026: New XL size What is it A set of print-in-place tackle boxes / organizers of three different sizes (For 320x320, 250x250 , for 200x200 and 180x180 plates).…
These days it's important to keep your children entertained. Parents who need to work remote and keep their children busy is hard. I designed these models based om dimensions of the IKEA tracks. We are always struggling to make the track…
A parabolic filament spool holder/roller. Just set it and forget it. The parabolic design of the roller keeps the filament reel centered. Requires 4 skateboard bearings (i.e., 608zz Double Shielded, 8x22x7), and snaps together. I grew…
Divine Beast Vah Naboris : Legend of Zelda Breath of the Wild
Want to access even more models not found here? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…
This is a digital 3D printable model of a Gaboon Viper (Bitis gabonica) Skull. The snake skull model is based on a scan. It was made for the National Museum in Prague. The download contains pieces of the model ready to be 3D printed on a…
French Curve Set 3D-printable school utility set for drafting conic sections. Contains: Elipse Hyperbola Parabola Printing this set is more affordable than buying it. Scale it if you need larger or smaller versions. I made myself a few…
Here my Guide Rail Holder for your Systainer T-Loc Box Tower. Set Bottom Part to the bottom Box and the Top Part to the upper Box and slide in your Guide Rail ;) Update 13/01/2022 -add stronger plate to the bottom part -add a pair of…
Aperture Science Laboratories – We innovate science! I like the overall aesthetics of the Portal games a lot. So, to fill a blank spot on a wall, why not use an oversized Aperture Labs logo? The logo This print represents the Aperture…
Yet another version of bricks to create bridges with IKEA Lillabo tracks and DUPLO bricks. Designed for an inclination of 2 DUPLO heights / 20cm track. Floor->Slope (bottom) Slope->Slope (middle) Slope->Bridge (top) Bridge->Bridge…
The paper is finally published and fully open-access! https://bsapubs.onlinelibrary.wiley.com/doi/10.1002/aps3.11562 We have only scratched the surface in developing 3D printable tools for COBLE. We began with microscope adapters and a…
RUS: Корпус для самодельного лабораторный блок питания, на основе модуля XY6020L и импульсного блока питания. Корпус спроектирован специально для печати на 3д принтере без поддержек. Список компонентов: Регулируемый модуль постоянного…
Scare the bejesus out of your family or neighbours with this really cool Jesus ‘I saw that’ decor. You can make thicker if it is too thin
Use the “smart fill” brush option to color the box. (the contours are offset by 0.01mm, so they are displayed when painting but ignored when printing). Or just use one of my precolored 3mf files. If you dont want to print it yourself, you…
He comes around every April to eat up the bad little kids. Leave eggs and chocolates out to fill his need for flesh. Recommend blocking supports inside the mouth, attached 3mf has custom painted supports. Tree Supports on build plate only…
Horizontal 1U Rackmount for ZimaBoard with support for between zero and two, 7mm high SSD. If installing 2 x 7mm this will take the overall height over the 1U height (44.5mm) to around 51mm. The rack mounting holes are designed for M6…
This is from a size 11.5 (not to scale) Adidas Ultra Boost 3.0 in Trace Khaki. Should be moderately easy to 3D print given you use some support for the lace aglets. Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: Doesn't Matter…
These days it's important to keep your children entertained. Parents who need to work remote and keep their children busy is hard. I designed these models based om dimensions of the IKEA tracks. We are always struggling to make the track…
cable slots 4 mm size W=30 x H=35 x L=164 mm best wall mounting with 3 x 20 mm countersunk screws. screw hole diameter 3.5 mm Print instructions print settings: PLA filament fill density 20% layer density 0.15 mm filament consumption:…
This is a model of a 4.5 mm diabolo pellet used in compressed air pistols and rifles. It is based on a real RWS R10 pellet and is designed in mm. You may not see it when you open it in your slicer because it's small. Once you upload it in…
This is the Star Wars S5 Heavy Blaster that appeared in both Episode i and II I was surprised by the lack of models and pictures available for this model. While searching for reference material for this I did find out the original prop…
Simple wall mount for Metabo 18V akku. Changes compared to the original model: position of screw holes optimized.
A modification of my sci-fi case to fit the [BaBo] inserts(8x6 units → https://www.printables.com/@Willi), along with adding the Bambu Logo! Wanted to stock my accessories/parts in style! I've already been using the prototype cases I…
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 or support me on Printables Clubs! Patrons have…
I made this to feed the filament up from below an IKEA Lack Enclosure and hopefully keep the filament dry. It also works to feed it top down by rotating the PTFE coupler 180°. I startet out by remixing the Parametric Enclosed Stackable…
I created a Measuring Tool for my Systainer to fast determine my loose screws up to 70mm length and diameter from 2mm to 6mm.
Well, i just had try to making one in Fusion 360. It was suprisingly easy.
The only thing I did differently is use m4 x 20mm bolts and some m4 x 30mm bolts. Also I used nyloc nuts. Everything prints fine without supports.
Slug or diabolos Print in TPU With steel ball as inlet see also suitable pelletboxes for 9mm or 7,62mm
Accessories for the Lucky 13 figure based on Metabee from Medabots. As I finish more parts I will update this to include them Remixed from the original Lucky 13 and GEARFIGHTERCZ's Metabee figure. If you remix this or share, please credit…
Wiki Link: https://en.wikipedia.org/wiki/120%C3%97570mm_NATO#Armour-Piercing_Fin-Stabilized_Discarding_Sabot_(APFSDS) Add a filament change about there for the 2-color look.
This insert was designed for a side cutter as an addition to the amazing BaBo organizer system from @Willi. Check out his site for more great inserts and modules. You can choose between two versions: version 1: insert with border version…
Update: November 15th 2025 - Tested it with the Tern Sun & Rain Shield and it works just fine. Pictures at the end. If you enjoy this model, please consider making a donation to familybikeride.org. I made this to help families get on an…
After printing the original model of the Runabout i wanted te build a bigger version. One that could have LED lights installed to make the model come to life. The model is 1/70 scale and so the total length of the model is 33 cm (13…
This is el blanco from the movie tremors 3. simply clue the tentacles in his mouth if you want. Print Settings Printer: CTC prusa i3 Rafts: No Supports: Yes Resolution: 0.1 ,0.2 ,0.3 Infill: 5 % Category: Sculptures
Are you a grow-er, not a show-er? It's a bit cold out there, huh? REAL cold, I hear. Well this is one giant collapsible beat-stick that WON'T leave you hanging. It can extend, collapse, uh... well that's about it, but it looks sick as…
This is a buffer stop female and male version. Have a lot of fun with it. Print Settings Printer Brand: Anycubic Printer: Predator Rafts: No Supports: Yes Resolution: 0.2 Infill: 25% Filament: Filemantwerk PLA light ivory Category:…
I belive during this time it is important to educate ourselves to understand how somthing exists in such a complex biosphere thats why i would like to share my Lab glove Box that i designed myself and i hope that there is somebody out…
Lost my original coffee cup holder for the Bugaboo. I wasn't happy about it because they retail for about $60. So I decided to make my own. Fits small and large coffee cups. Stay tuned for a beer holder attachment coming soon!
The Parabolic Wave Grid Panel #2 - Standard Detail features an intricate parabolic wave pattern, created by extruding squares at varying heights. This versatile design looks incredible in various finishes, including tricolor filament,…
Simple battery wall mount compatible with Cordless Alliance System (CAS) battery. Category: Tool Holders & Boxes
Hello! This is a simple playground roundabout or spinning wheel for the Playmobil kids, the design is inspired by the one displayed at the picture of the set 4015 . Check my other creations for the playground in this collection . It is…
models of the area cards from the vr game Ghost of Tabor dimensions of all cards x- 91.44mm y- 55.96mm z- 2.67mm NEW RED
4 way intersection for Brio and Ikea LILLABO wooden train. Print-in-Place to make the intersection rotatable. Print settings: 0.2mm layer height slow down bridges and turn on fan (100%) PLA/PETG All credits go to LocoRico for that great…
This project provides the models for a printable vacuum clamping system utilizing the Dewalt Grabo DCE592B lifters. All fittings are ¼" push connect lines and ¼" NPT thread. BOM Dewalt Grabo DCE592B lifter Minwax Polycrylic sealant 1/16"…
Brackets for mounting Noctua NF-A12x15 fan above PSU in Fractal Design Terra case. One is mounted on top of the PSU, the other one is mounted on the case from the front panel side. Works with all Terra's inner bracket positions. Must be…
![Warning sign - You are about to eat the worlds best BBQ [Multicolor Manual color swap Or MMU2s]](https://media.printables.com/media/prints/165742/images/1540085_8bdb8fad-d388-4ed3-b5c3-9bff6514d46a/sign.png)
![Sci-fi Case - [BaBo] edition](https://media.printables.com/media/prints/681283/images/5353811_d24f9040-a375-4f9d-953d-63e91bcbe029_283f9a9e-ecfd-4f58-8aa4-3b8672df07e0/dscf9370.jpg)
![[REMIX] - Metabo / CAS battery holder (wallmount)](https://media.printables.com/media/prints/428582/images/3546805_617b3b8a-e2a5-4c02-a0af-5a69dad68dc6/large_display_ca59ce33-c81f-42fc-bf7d-b214923a7a65_428582.jpg)
