102 models
He adaptado el cierre a imanes de diámetro 10x2mm y he introducido los imanes de la base en la impresión de la misma.
Print approx. €0.28–€0.35 excl. taxPreliminary estimate for PETGSource material: PET
Voici une adaptation pour permettre à une personne en situation de handicap, qui n'a pas la capacité d'appuyer sur le bouton du médaillon, d'agir et d'appeler le soignant. Le support comprend une partie ajoutée qui simplifie l'appui…
Print approx. €0.75–€0.91 excl. taxPreliminary estimate for one variant
There is no need to follow the curved form of the bottom of the Bambu AMS. So this is a straightened version of Eldon's model. It has a bit more volume, is easier to print, no supports needed!, and I designed a stand to fill the trays to…
This version of the Shop-Vac-Hose and Cable Hanger / Hook utilizes the Hillman's Wall Dog 1-1/2 in. Hi-Lo Steel Pan-Head Philips Anchors which are found on Amazon and at hardware stores like Home Depot in the United States. It is nice…
the size of the nubs or holes could be slightly of for your printer. i changed them to be 0.2 mm larger. Suggested to print slow (1mm/s z speed) because the props are thin and can flex during printing.
This model will fit the new 8Ah smart Parkside battery .
The original is excellent for winding good spools to new spools. One of my problems is two part spools that came apart or came loose. This redesign "locks" winder pieces together for for finicky feeder spools.
Edit: There is now a sensorcover with a latch for the cable connector. To adapt my MK3 with Bondtech extruder to my MMU2S with the new IR sensor I made a new topplate with sensor housing. Included is a LED indicator to visualise the…
The voron subreddit gives you a pre generated serial plate but it only works with the v1 and v2 vorons which isn't too handy for v0 users. I made this version of the serial plate that clips onto the lower grill of the printer either on…
Update (09/12/2026): Updated the K1 Sensor model to eliminate the need for spacers. UPDATE(03/16/2026): COMPLETE! Instructions have been updated for securing the nozzle as detailed below in the previous update. This proves much better and…
The voron subreddit gives you a pre generated serial plate but it does not fit the v0.2 skirts. I modified the v0 STLs to fit the v0.2. To make your own, you're going to need OpenSCAD. Just download the files, open the scad file and…
Oryginal contruction is too short to cover Ender S1
This is a compilation of things in order to upgrade (or build) your Prusa I3 MK3S with MMU2S and Bondtech BMG extruder kit for MK3. I used the Bear X-Carriage with an adaptation for the Bondtech extruder and MK3S filament sensor (source:…
This is a remix pack of the rip of all the powerups / items from super Mario bros wonder the following contains: mushroom 1-up mushroom drill-shroom elephant apple fire-flower bubble-flower wonder-flower fire/bubble/wonder-flower stem…
Gridfinity baseplate adaptation for Multiboard , parametric - with FreeCAD file. You will need a Lattice2 workbench addon in FreeCAD . There are also stl and step files. The baseplates are from 1x1 to 5x3 in size. Printed with PLA 0.4…
I have edited the original base plate to fit 400mm pots. Additionally, I created new segments with holes for 3-inch net cups so you can plant extra vegetables on the base plate. The plants can be grown using the Kratky method or with a…
The official case for the raspberry pi with a camera hole has a protruding ring around the lens. It's not by much, but it's enough to make the original of this model unusable on a fitted camera. This version has a ring let into the…
Adaptation of MMU3 Cassette Compatible Buffer for Prusa CORE One + UPDATE: 8. August 2026 made Automatic Cassettes available for the buffer After trying countless filament retraction systems (own designs and available on printables), I…
This adaptation to the headphone holder model is to accommodate the Hillman's Wall Dog 1-1/2 in. Hi-Lo Steel Pan-Head Philips Anchors which are found on Amazon and at hardware stores like Home Depot in the United States. ***Update***…
Adapted Cetner Console Organizer originally from @stritti.
Thanks to Tomek for first schienenbus. I scaled his design to fit with TT gauge rail. I added stairs, bars, boogie (not original, is from a romanian railbus)), motorization adjustable pieces, supports for micro LEDs. All the pieces was…
Adaptation at TT scale for Ganz 1903. Acest vehicul feroviar a circulat si in orasul Cluj la inceputul secolului 20. For any comments or observation contact me at [email protected] Update 16 sep. 2022: I delete the motorization pieces…
The Durango DEX410 V3-4 RC buggy is an iconic car, designed around the utilisation of two saddle packs installed in the rear of the car. Even if the car is quite old, some fans are still using it, but saddle packs are now very hard to…
Держатели катушки AD5X безынерционны и кроме того способны доматывать филамент обратно, если он случайно вытянулся, что позволяет избегать запутывания. Поэтому сразу же возникла идея приспособить их для Neptune 4 Plus, так как он…
Not exactly a remix of that one but of this one https://www.thingiverse.com/thing:3405964 The box was printed in Marble PLA. Inside it you can fit the ESP32, a USB C Power Delivery Board and a LN298N Servo Controller. Basically it is a…
This model is printed with the following colors for the multicolor peice: black, silver(silk), and grey. The bottom shell is printed with light brown and the reinforcement ring isn't seen so you can print it with however color you like
I've noticed that people were having trouble aliening the dual extrusion models together this should fix this. I don't own a dual extrusion printer so I'm not 100% sure that this will work in terms of software/file compatibility, if not…
The colors I used for this print was: light blue, white, silver, and light brown. The top part of the model is multicolor while everything else is not. This model has been scaled by 150% because it was really tiny.
I really enjoy this enclosure as it is tough, light, and adaptable. I would also like to test other radios, since the case leaves some room for exploring. I used double sided tape or hot glue to keep the chips in place. EDIT: After…
This is modification of the EVA 3D tool head extruder part for Bondtech LGX and LGX Lite extruders ( https://main.eva-3d.page/ ) to fit MGN9 rail (both C and H carriages), for those looking to swap MGN12/15 linear rail it is originally…
C'est le fichier .stl du rail permettant d'installer le pousseur bow sur la scie Evolution Rage 5s.
A simple mod to Carbon 13 to allow the use of a 30 Minute Sister head. Because the ball joint is smaller than the original supports should be used. I've used tree supports with no brim at 1.2mm with a 4mm nozzle.
This design is an interface for the TTC lamp which will allows to use the shader from Bugman_140 The shade from Bugman_140 can be found here: Modular Lamp Modular Lamp - Cauldron This interface requires also to print the TTC Lamp Feel…
J50 LNER adaptation to TT scale for Tri-ang T90 mechanics. If you want to help me with other locomotive mechanics in order to make another models please contact me through Thingiverse.1 Category: Hobby
It is a first revision. Please comment any problems with the models. Please fallow the RatRig instruction regading the printing their models.
The original from Lichtjaeger was looking very good. I just wanted to add some marks so that I can know how much filament is left in the spool.
These are the files required to print an HSW wall onto an IKEA closet. Closet dimensions: Depth: 24 cm Thickness of shelf: 16.5 mm
We are SycaTech#18268 , a robotics team competing in FIRST FTC. As part of our project MUSYCA, we developed an innovative way to play the guitar using only one hand. We created two assistive solutions: ArmStrum – A foot-controlled…
I remixed prusa's print of the door knob prints to fit a 3mm thick magnet as I could source this locally and faster. The exposed faces surrounding the magnets were extruded an extra 1mm.
The Marble lift by bamoore01 is just outstanding. The parts print perfectly without support, you may need some added brim to give the tall pieces more contact area to hold. I've have over a hundred designs on Thingiverse and few match up…
I really wanted a lighter toolhead than what I currently had with the linear rail mod from Hoon. I also wanted to play with a Stealthburner and install an ERCF on my Ender 5 S1. I had to adjust the belt path and add additional bearings to…
This is a remix of Vesa 100x100 Screen Wall Mount (rotate) by Paul Marsch This is just an adaptation for a metal TV mount. The metal mount that was supposed to fit on my TV was too big and would cover the video inputs. You can print it…
Il s'agit d'un support d'adaptation afin de fixer le support de téléphone pour fourche de moto Quadlock sur une Ducati 749 (ou 999).
Just another remix of a sprite cable chain
I liked the idea of the spacer that another designer had made as I was struggling to make an adequate and secure venting enclosure. I thought I'd take some time to make a similar but different approach to using duct pipes with magnets.…
I have seen a few filament dryers out there that require you to cut the trays apart on a dehydrator. I have also seen the 5 gallon bucket versions. The adapter rings on those usually causes turbulence because the heat comes out at the…
This adaptor allows you to use a Prusa Mini+ as an automated fluid sampling system. We use this system to generate small droplets to do agglutination based diagnostics. ie if you look how clumpy the stuff on the inside of the droplet gets…
The Yaesu belt clip for the VX radios allows you to remove the radio from the clip by turning it upside down. The clip is cheap to purchase and this adapter allows you to use it with an ID-50, ID-52 and even an IC-T10.
Disclaimer This template will maintain full compatibility with Gridfinity ONLY IF you leave a few of the parameters at their default values (see the Customization and this section below for a full explanation). If you start to change any…
RePET - BambuLab A1 Mini Adaptation (Remix of the original RePET adaptation made by Filarte 3D for the Bambu Lab A1) Short description Mount kit to adapt RePET to the BambuLab A1 . This set provides: X-axis bracket to hold the RePET…
This is an adaptation to TT scale for AC Railbus UK Category: 3D Printing
This rethink of the original model incorporates sensor support for pre and post extruder, I made it to try and take advantage of the new auto-calibration features in Happy Hare. Uses 5mm ball bearings, some PFTE tubing, microswitches The…
Moldura do radio sprinter modelo 2002 modelo alongado para adaptação de radio com tela multimidea, utilizar retifica.
X1C玻璃盖板适配P1P 使用丁基双面胶粘接 材料：热塑性聚氨酯 填充： 15%
Adaptation of the PickleWhoop V2 (25) :
A snap on 3D printed home button adaptation for the Oculus Quest 2 controller, this device allows the user to press the home button in an alternate way, such as by bringing it up and pressing the top against their chin, other body part,…
Rather than using coin battery/rechargeable Tea lights, this Model adapts a LED USB Flickering Flame Bulbs into a Tea Light suitable for use in suitable Candle holders (eg the modern candlelight No1 by MIPI3D…
I ordered the wrong version of the Revo for my MK3. Instead of ordering the Revo Six I purchased a Revo Mini. Instead of returning the mini I just created a new extruder body and motor plate with the throat modified to fit the Revo Mini.…
This one is far easier to print than my first trial
Remix of a remix to add a solid-walled variant, for easier printing (at the cost of extra filament). This also gives pariety with the original MMU3 Cassette Compatible Buffer, which provides solid-walled variants for the top and bottom…
The hook has a length of 80 mm, an overall width of 30 mm and a thickness of 20 mm. The print was made from PETg.
Power Strip mounted over Monitor (with f3d for easy adaptation) The model is available for free download and use. If you still want to invite me for a coffee for my effort, troubles and time, you can do it via:…
Modificación para mejorar el ajuste a las medidas de la mesa IKEA LACK y el anclaje entre la base y la tapa de la guía
The AlveoPRO adaptation kit is designed to seamlessly integrate the AlveoPRO air filtration system with Bambu Lab H2D, H2C, and H2S printers, including full compatibility with the AMS system. This kit enables efficient extraction and…
This assembly fits on a reptile terrarium fogger/humidifier I bought, to adapt it for office cooling duties. Since (news flash) energy has been a tad higher lately, I've tried to find more economical alternatives to air con. Air con is an…
I made an adaptation for my peg board, but it's difficult to print
You need 2 M3 40mm and 2 M3 5mm screws. Print it in ABS or ASA at 100% infill. Make sure to have your supports tuned or youll find yourself drilling the 35mm holes. The supports released perfectly fine for me.
I made a remix from @holck to be able to fit it the way I wanted in the enXLosure.
The smaller part replaces the internal battery and maintains the original internal circuit by pressing the contacts on the Camera. The original wires internal to the original battery pack are stripped and replaced with longer wires that…
This is a set of parts to replace the internal coin mech brackets and blank the coin slot on a Suzo-Happ coin door. I made these to adapt the coin door for a virtual pinball, and put switches behind the coin rejects to serve as a coin…
I designed this ring to put inside Kyosho legendary series Scorpion rear tyres and use them with Marui Hunter and Galaxy rims: the ring will be locked laterally by the two parts of the rim, and will lock the tyre against the half rims.…
Handle: https://aliexpress.ru/item/1005004289599841.html Used with Sofirn Q8 Plus
A filament dryer using a 5 gallon bucket and a Nesco food dehydrator. This version doubles the size of the original to make it 4 pieces rather than 8. On a 235 x 235 bed you can print two at once. I discovered this does not fit a Home…
this is NOT mine I cut it in half these are from https://www.printables.com/model/1056626-cylinder-lock-model/files
Three rings to fit around the aperture, focus, and film dials on a Hasselblad film camera. The rings make spinning the dials easier. Print in PETG.
I needed a version for my mic (Samson Q2U) to mount it onto Flexible & sturdy phone arm (100% Printed) . The latter needs to be screwed by M12 with 1.75mm pitch. The initial inner insert was remodeled from scratch. Thanks to author of the…
Adaptable sur tout les aspirateurs Mac Allister. Autres Marques à Mesurer et confirmer Diamètre côté aspirateur 80.0mm Diamètre Coté Tube 40.0 mm Adaptable to all Mac Allister vacuum cleaners. Other Brands to Measure and Confirm Vacuum…
Mid part features a threaded port for standard barrels. Print with 0.1 layer height for threads to come out decent. I used it in PC and PETg, both work fine. The front piece has an M3 slot to attach to the blaster body permanently.
Cover with a fan setup
Hello, This is one of my first remixes, I adapted the box so that I could screw my pi zero 2W and I also modified the lid so the pi camera 3 wide could be screwed, leaving enough space so that the autofocus can move the lens. Use…
I am a tetraplegic, and I designed this adaptation to help me brush my teeth in a more complete and easier way. The toothbrush is fixed in the middle of the circle, and it is rotated with the mouth during brushing. I included two files…
Je suis parti du modèle original Lampe Lithophanie x5 , créé par Mike-8910 , que j’ai modifié afin de l’adapter à un spot LED sans fil MOUJUCHI . Le support intérieur a été retravaillé pour permettre l’installation du spot directement…
update!!!!! after a few days, i hate it, the design is awful, and honestly i will just not deleted it because, i think even a mistake is a learned experience, and someone might find some use on it. but do not use this design as it is, if…
Use cases : This is my creation of a monopod adaptation of a digital camera quick release plate. You will need two M3*8 screws, two M3 nuts as well as a minimum M4*10 screw and an M4 nut. Assembly is simple, first insert the two M3 nuts…
Scaled down to 95.4% on XY axis for Lexman Victoria sockets compatibility.
This is an adaptor plate so i can test my DSLR batteries using an electronic load and LVSun charging plate as contact for the battery Electronic loads can be purchased on Aliexpress/Bangood/… I typicaly use this 35W capable load that can…
I made this spool holder as a substitute to the metal spool holder for ender three as i really wanted to use the angryhulk filament holder (https://www.thingiverse.com/thing:4834202) but did not have the original metal one. I printed this…
Appreciate any support that is provided. The hole for the charger was reduced to a 56.2mm https://www.paypal.com/ncp/payment/7XH5TK4DDEQX4
Sunlu E2 is not really compatible with 3kg paper spools provided by Fiberon. So... my solution was built around what i have in hand /STP file provided, so U can adapt it /: BOM: /mm/ 2x Bearings - 35x15x11 1x spool axis rod 180x16 2x…
Adaptation de support ErgoBrass pour trompette en plastique (type StarTone). L'ergobrass est une très bonne invention pour les personnes hémiplégique. Cependant notre client possède une trompette en plastique et l'adaptateur d'ergobrass…
il s'agit d'une plaque permettant le maintien en position d'une sacoche de crash bar sur un porte bagage d'un kove 800x.
Quick and dirty cut and assemble of original models. Hope you like it! Visit original part for the rest of the model, only modified parts uploaded here.
Categoría: Producto de apoyo / Juego Contexto de uso: Ocio Modo de uso: Pensado para poder montar un cubo de Rubik 2x2 sin ver los colores. Recomendaciones: Utilizar un pegamento rápido que no genere relieve entre el cubo y la pieza…
I have the Marineland Penguin Bio-wheel 200 (up to 50 gallon). If you have a different size filter, make sure to measure your tubing first. Extending tubing allows intake to moved to the opposite side of the tank to the output for more…
Scaled down to 95.4% on XY axis for Lexman Victoria sockets compatibility.
Cover with a fan setup
Appreciate any support that is provided. The hole for the charger was reduced to a 56.2mm https://www.paypal.com/ncp/payment/7XH5TK4DDEQX4
Remix of a remix to add a solid-walled variant, for easier printing (at the cost of extra filament). This also gives pariety with the original MMU3 Cassette Compatible Buffer, which provides solid-walled variants for the top and bottom…
A filament dryer using a 5 gallon bucket and a Nesco food dehydrator. This version doubles the size of the original to make it 4 pieces rather than 8. On a 235 x 235 bed you can print two at once. I discovered this does not fit a Home…
This adaptor allows you to use a Prusa Mini+ as an automated fluid sampling system. We use this system to generate small droplets to do agglutination based diagnostics. ie if you look how clumpy the stuff on the inside of the droplet gets…
