304 models
EDC Micro Series. Compatible with each other. See also: EDC Micro Pill Capsule - Keychain EDC Micro Screwdriver EDC Micro Tools I EDC Micro Tools II EDC Series Box Inspired by an idea Michel Bauer - Exacto knife keychain. Completely…
Print approx. €0.78–€0.96 excl. taxPreliminary estimate for one variant
This is a scalpel handle model (12 cm long). Be careful not to cut yourself when inserting the blade into the handle. To secure the blade, I recommend using a screw approx. M2x5 mm, for which a hole is prepared there. (It is not a…
Print approx. €0.54–€0.66 excl. taxPreliminary estimate for one variant
A sharp knife is safer than a dull one, but scalpels still scare the stuffing out of me. I mean, I'm not opposed to using them, but the swiftness with which they can make unexpected incisions can be alarming. So I made a cover for a…
Print approx. €1.41–€1.73 excl. taxPreliminary estimate for PETGSource material: PET
Wanted a decent way to store my scalpel. I used to use the blade package (but that never stayed on!) This is a simple push fit cover - the slotted hole is more than just a rectangular slot and is designed to keep the blade snug. Print…
Print approx. €0.48–€0.59 excl. taxPreliminary estimate for PETGSource material: PET
A simple holder for a xacto knife. It is designed as safe as possible, so it won't open carrying around. Be careful not to cut yourself :) Just pull the little protection ("child safety lock") down while extending the knife. IMPORTANT:…
Print approx. €0.29–€0.35 excl. taxPreliminary estimate for one variant
quick access to scalpel and other tools
Print approx. €1.75–€2.14 excl. taxPreliminary estimate for one variant
A small (5 cm) knife handle for use with Swann-Morton No. 3 blades. I couldn't find anything quite like it so I made one. One of those “Just because” projects that don't want to leave you alone until it's figured out and finished. I find…
Print approx. €0.38–€0.47 excl. taxPreliminary estimate for PETGSource material: PET
Simple, quick printing cap for a Swann Morton No. 3 scalpel with No. 11 blade. The cap is designed with a built-in catch and retaining spring to ensure it doesn't come off inadvertently, though can still be released easily using one hand.…
Print approx. €0.37–€0.46 excl. taxPreliminary estimate for one variant
Print vertically. Its a tight fit and can be adjusted with a small round file. I made it tight because you don't want it coming off. I tested it with an #11 and #10A blade.
Print approx. €0.79–€0.97 excl. taxPreliminary estimate for one variant
materiál PLA tryska 0,4 mm vrstvy 0,2 mm tisk zastavit na vrstvě 1,6 a vložit čepelku Teleso2 slouží jako podpěra přední části čepelky možno použít čepelky č. 20-24 stop printing at layer 1.6 and insert the blade Body 2 serves as a…
Print approx. €0.19–€0.23 excl. taxPreliminary estimate for one variant
I designed protective cap for my scalpel. Print instructions: I decided to use PETG, but you can print the cap from PLA. Variants: Inner diameter 8,1 mm Inner diameter 10,8 mm Custom modification: If you want to modify the model, I am…
Print approx. €0.35–€0.43 excl. taxPreliminary estimate for PETGSource material: PET
Remix of Gridfinity Swann Morton scalpel holder . This model holds up to two scalpels and has space for extra blade storage like the original. Each compartment has a detent, so you can push down on the back end of the scalpel, raising the…
Print approx. €3.18–€3.89 excl. taxPreliminary estimate for one variant
Small tools holder A holder for small tools: tweezers, dentist tools and x-acto utility scalpel with replaceable blades. Print it “standing” with 10% gyroid/grid infill and grid support from build plate only. The tool holder module…
Print approx. €4.80–€5.87 excl. taxPreliminary estimate for one variant
Personally wanted a more rounded design. Remodelled in Solidworks as the original file wasn't available, and corrected some of the internal faces while I was at it. Single piece, no support required. Print vertically with the opening for…
Print approx. €0.39–€0.47 excl. taxPreliminary estimate for PETGSource material: PET
A scalpel box that can hold up to 2 scalpels (No. 4) and spare blades. Printed with PLA and PETG with 0.2mm layer height and 0.4mm nozzle. The lid edges must be cleaned a little bit after printing so it fits perfectly into the box :)…
Print approx. €2.80–€3.43 excl. taxPreliminary estimate for one variant
Držák na scalpel s magnety od firmy FIELDMANN pro IKEA Skadis
Print approx. €1.86–€2.28 excl. taxPreliminary estimate for PETGSource material: PET
material PETG, no supports
Print approx. €1.05–€1.28 excl. taxPreliminary estimate for PETGSource material: PET
version #2 is here: https://www.printables.com/model/233945-pocket-scalpel-knife-folding-scalpel-knife-v2-for- there are two versions for different blades: (A) for numbers: 9, 10, 10A, 11, 11K, 12, 13, 14, 15, 15B, 15C, 16, 17, etc.. (B)…
Retractable pocket scalpel designed for #11 scalpel blades. No supports needed. No hardware needed. Recommend printing at 0.1mm or 0.08mm when using a 0.4mm nozzle. Designed with tight tolerances in order to help keep it in the closed…
Scalpel Cover of Swann-Morton No.3 Handle with 10A or 11 Blade . Not yet tested No.11 Blade, would be grateful if someone was able to confirm compatibility. Affiliate Disclosure : As an Amazon Associate I earn from qualifying purchases.…
I have so many scalpels here, but none handle. So i decidet to design a handle to fit my slide on scalpel. Multiple versions - one with a finger guard and a slighly improved fixed blade. Please be carful when handling with such sharp…
This is a scalpel box for Zack's Gridfinity system based on https://www.printables.com/de/model/226535-gridfinity-adapters Gridfinity is the ultimate organizer for your whole workshop! Zack originally posted all the Gridfinity accessories…
Instructions for printing: Layer height: 0.08 - 0.15 50% of fill, to make it heavier and more confortable No supports required Hope you enjoy and any suggestions or mods you want me to do, just ask me :)
Small and light folding handle for disposable scalpel blade. Designed specifically for blades no. 24. When closed, the edge of the blade is safely hidden in the handle. I designed it s an ultralight cutting tool for a backpacking first…
A handle to put arround the Swann Morton number 3 scalpel handle to increase grip and reduce fatigue. Realy handy if you use this scalpel for diy project and cut cardboard or other materials for hours. How I Designed This Fusion 360,…
Quick to print without supports! Example for a suitable blade: https://www.amazon.de/gp/product/B00IU780CA/ref=ppx_yo_dt_b_search_asin_image?ie=UTF8&psc=1
Handle designed to hold scalpel blades, but also holds Xacto blades No supports needed, but good bed adhesion is important.
Scalpel cover/lid for handle #3 and blade #11.
Here's a very simple kit to make an exoscalpel device, which used an advanced energy beam to cut tissue at various depths. No supports required but use a brim on the tip.
Swann-Morton Scalpel No.3 with #11 Blade Cover Caps. Included 2 versions (Spitted and Full). The split version can lay flat on a printer. So it can print faster and a lot easier. The parts are also stronger when printed this way. But they…
Made for Swann Morton no3 handle scalpel. Might fit other brand but I don't have them so I can't be sure. Two versions: Single to just push the blade out. Box to extract and collect the blade in a sealed container. (you can't retrieve the…
Holder for up to two scalpels and 6 blade replacement kits
version #1 is here: https://www.printables.com/model/233942-pocket-scalpel-knife-folding-scalpel-knife-v1-for- there are two versions for different blades: (A) for numbers: 9, 10, 10A, 11, 11K, 12, 13, 14, 15, 15B, 15C, 16, 17, etc.. (B)…
It's dangerous and frowned upon to store a blade attached to a scalpel handle, yet I do it all the time. My needs are not surgical, but it's dangerous. I also typcally use a #11 blade on a scalpel handle #3. To help make the storage of a…
buy Scalpel Knife: https://www.aliexpress.com/item/32861053837.html?spm=a2g0o.detail.0.0.34589r9H9r9HAk&mp=1 see also my Gridfinity Deburring Tool: https://www.printables.com/model/612387-gridfinity-deburring-tool
MOLLE clip for 20mm stick The hole is 21mm, so it's not super tight, just for the stick staying in place. If you're confident with the strength of your print, you can try the thin one. If not, use the wider one! ← Super recommend! Infill…
TL;DR This is a 3D Model of a virtual route in Zwift. Collection Zwift Motivation 3D printing makes the elevations of your tour visibly. Very nice as trophy and those who did it know how hard this track is. Let's get started Just…
A multiboard compatible scalpel/xacto knife + spare blade holder. There is a tight fit (not all brands might fit in there) and a loose fit (+1mm tolerance on all sides). I've printed mine out of PLA with a 0.6mm nozzle at 0.3mm layer…
This insert was designed for a scalpel and deburrer incl. accessories as an addition to the amazing BaBo organizer system from @Willi. Check out his site for more great inserts and modules. This scalpel + deburrer insert can be used for…
A scalpel cap for type 3 scalpel holders like this (Amazon) . The cap contains clips inside to hold it in place. Print with brim, open side down. Print Settings Printer: Vellemann K8800 Rafts: No Supports: No Resolution: 0,2 Infill: 100%…
This model holds up to two Swann Morton (or similar) scalpels, and has space for extra blade storage too. Each compartment has a detent, so you can push down on the back end of the scalpel, raising the front end up for easier access.
i liked the look of the original but i hate using metal screws, finding the write size etc... so i modified it to accept custom printed screws, which are much chunkier which also meant changing the frame to accept them. print the screws…
A simple scalpel (and 2 spare blades) holder for IKEA SKADIS. Suitable for scalpels with a diameter of ≤10mm. Used scalpel kit: Wedo Scalpel and Replacement Blades/78621 [ https://amzn.eu/d/i4QMuzI ] ----- I printed with these settings:…
Holder for a scalpel, modelled off a #4 stainless steel holder. Untested; exercise extreme caution when using this. It may break while being used. Category: Biology
Made this case to compliment the excellent Scalpel cover design by Extra Fox https://www.prusaprinters.org/prints/44676-scalpel-cover . My case incorporates the above design and allows for storage of extra blades. Print instructions Print…
This is a snap on cover for #23 scalpel blades with a size 4 handle. Be aware that these have wildly varying measurements. This one is for the top-selling scalpel handle size 4 + #23 blades on aliexpress, leave a comment if you need a…
Simply box for storage scalpel (type 3) and spare blades. #EDIT# Changed position of scalpel.
Here is yet another storage case for a Scalpel knife, but this one incorporates a compartment for storing up to three spare blades and has a sliding door mechanism. The case is make specifically for my Gima branded Scalpel handle Nr.3…
Boring entry Hi! Soooo i was bored and thought to make something. Idea landed on making smallest and still comfortable to use blade i could think of. NanoBlade was born and now i can present it to you. For assembly all you need is scalpel…
Compact 85mm x40mm x 30 mm scalpel holder for up to 4 scalpels. It is suitable for scalpel with 8mm and 10.9mm diameters
A handle for surgical scalpel blades "fitment 3"... fits those standard kind of blades Instructions print with .15 layerheight or lower fit blade ????? profit For editing: In the sketchup file the "fitment" thing is saved as a standalone…
Vertical holder for a hobby scalpel. Has 2 compartments for blade boxes that come with such scalpels and 6 slots for blades. Designed so the scalpel rests on the handle and not on the tip of the blade. Doesn't tip over on its own,…
this cas can store a scalpel n°3 , the scalpel is held in place with (5mm magnets) and their is a compartment to store blades
A simple box to keep up to four scalpels in, with or without blade. For storage or travel. They sit tight in place and should not rattle during movement. Print instructions Category: Containers Print Settings Printer Brand: Prusa Printer:…
Re-design the interior to fit #10A blade. Also fits blade #11. Related Links:: Swann-Morton Blade extractor More Info about this design Filament I Use:: eSun ABS+ (Fire Engine Red and Black) My Channel: YOUTUBE CHANNEL:…
Skalpell May Nr. 4 Halter für Ikea Skadis mit Aufbewahrung für einige Klingen. Das Skapell steht 15° geneigt. Version 1 ist einfach eckig und Version 2 hat auf der einen Seite eine eliptische Aussparung. Scalpel May No. 4 holder for Ikea…
Print the lid with supports. Glue in 6x2 mm magnets
A guard/sheath/cover for a scalpel blade no. 23
This is a remix of the scalpel holder made by @D_Y_302092 And it is the same as his V1 but made longer to be able to accomodate the longer blades available. The second picture shows a comparison in size of the original and the remix.
A guard/sheath/cover for a blade no. 10
i've printed this in PLA, the cap grips the knife well. i printed this on an ender 3 v2, so depending on your printer, you might want to scale the model in your slicer. designed to print without supports. the cap is designed to be safe,…
I needed a container for 3 scalpels and some packs of blades, not finding anything ready that suited my needs, I made one starting from the parametric base by LayerCake
Gridfinity Xacto Knife Holder for 5 knives and extra blades
I printed it in PLA with a 0.16mm layer height, 4 walls, 10% infill. No supports are needed. You should print it as it's oriented in the STL. You need good bed adhesion since the main body of the handle has a small contact patch and…
Scalpel no.3 handle and no.11 blade tight fit cover 235/55 PLA %30 infill Scalpels are not all the same. So this may be too loose or too tight for your scalpel. I draw this model to slightly tight fit to mine. You need to remix this model…
Scientifically accurate model of a Borealpelta, a species of ankylosaurid. The model features detailed scale texturing along the model. I created two variants of the model, standing and posed. I recommend printing it at a finer layer…
I had a mini scalpel blade/handle included with a kit of things but it snapped. Since I had made a custom space for it in some foam I found it hard to actually purchase another without buying multi-packs that came as disposable units. As…
This is my version of the Halpern Meier Pyramid. BOM: 4x 20mm M3 screws 1x 25.6mm 4 axis skewb + pyraminx core (separate upload) https://www.printables.com/model/254610-puzzle-cores/files
Gridfinity box for two Swann-Morton scalpels and some blades
🔪 Flashforge AD5X Filament Cutter – Scalpel Blade Holder (Adapted for printing) A printable holder for standard flat scalpel blades – replaces the original filament cutter blade on Flashforge Adventurer 5X (AD5X). This part allows you to…
The model consists of an anti-slip handle, a protective cap and an anti-recoil cap.
Scalpel Keychain as utility to cut something. It works with No.11 blade. Just cut the tail of scalpel to inject into handle. Should use PETG or ABS filament for hard and durable. I printed with both ABS and PETG.
This terribly clever blade extractor was just begging to be remixed and merged with a cover, so I did just that. Print it vertically and you can loosen the support using the holes at the end. Category: Hand Tools
This little 1x1 can hold 7 sanding sponges (21mm W x 6mm D x X high, mine are the DSPIAE brand), a No. 3 scalpel handle and extra scalpel blades (there is an optional 5mmx3mm recess for a magnet to help keep the spare blades in place).…
Alpe d'Huez / Alpe du Zwift The Alpe du Zwift is a virtual recreation of the Alpe d'Huez in the popular cycling simulation game Zwift. It is 12.5 kilometers long and has an average gradient of 8.5%. The climb features the same 21 hairpin…
I made this for collecting my used scalpel blades. Affix lid with CA glue for a permanently enclosed container. This model has not been designed for clinical waste containment or disposal. Please check your local laws/regulations for…
I designed these tools to add onto my Leatherman Wave+, and have been using them and tweaking them for at least a year. Please see the details below to successfully print and use each tool. PLEASE NOTE that they are not commercial grade…
This is a simple kit to build the exoscalpel as seen on Star Trek: The Next Generation . As all parts are separated, no painting is required. I recommend printing the tip in clear filament (clear PLA/PETG) with 100% infill. I am not…
Just increase wall thickness and add some clearance to fits #10A blade. The original design from M600 . Notes:: I print with some brim to increase first layer adhesion. I only test with blade that I have (#10A and #11). Filament I Use::…
Made compatible with Skadis 76x56cm by removing mid hook from original design. Also added a second blade holder. V2 is made to be tighter on the pegboard. Used scalpel kit : https://amzn.to/3JtDZ8q (This is an affiliate link, potentially…
After posting a print showing that blades No. 36 could not be loaded, wolffshaut provided the F3D file. Thanks again @wolffshaut !
Just a little project I decided to frame mount. Managed to sneak it up in the kitchen for a couple of days before the wife noticed
This is a protection cover for no.11 scalpel I use on my Roxon Flex short implement.
A tight fitting cover for a scalpel. Fits this type: http://r.ebay.com/BvRTYx Category: Hand Tools
Please note: I am using a filament profile with a Flow Ratio of 1.045 at 255 °C for first and 265 °C for other layers. Part cooling fan > Keep fan always on is OFF. I just printed another insert and realized it was too small with the…
A small curved blade. Perfect for opening boxes!! The Finger cutouts use the average male ring size of 20mm diameter. Scale model as needed using your ring size in the chart below. Ring Size (US) Diameter (mm) Scale Factor 5 15.7 0.785 or…
Easy fix, when you losted your scalpel lid as me.
This insert can hold: deburrer with a maximum size of 25x25x150 scalpel with a maximum size of 13x15x150 up to 10 blades for the scalpel with a maximum size of 1.5x10x40 Please note that the maximum dimensions do not take into account the…
Handle designed to hold scalpel blades, but also holds Xacto blades No supports needed, but good bed adhesion is important.
This is a case that holds 2 scalpel knifes (1 big and 1 small). You will need a 2mm x 19mm rod to act as the hinge. Category: Tool Holders & Boxes
Made a 1x4 gridfinity bin for my xactos Just did a single filament colour change at a layer height to get the rim
Pocket to hold “Fabric” multitool.
With this tool you can cut cardboard, paper or similar material straight. Slots are placed on the tool at a distance of 5 15 25 35 45 mm so you can easily adjust the desired cut on your material Printed on Prusa MK4 0.2 layer PLA 40 %…
This holder was designed to organize scalpel blades. Recommended print details: Infill: 15% Supports: No Rafts: No Material: ABS / PLA
