Counting matching models…
An apartment building remix for a generic modern or SciFi settings, at 6mm scale. I've added extra detail and scaled this specifically for 6mm scale Mecha Fights. This set is intended to be compatible with the other 6mm SciFi terrain sets…
Follow me on Instagram or Twitter for weekly updates on free, high-quality designs like this. Get exclusive free designs, commercial licenses, and premium model plans on Thangs ! (affiliate link) This minimalist apartment model captures…
I printed these in PLA for my diorama. Made in Tinkercad.
Note - This is not a MMU print. Simply print the parts in the appropriate colours and glue them together. Little Cities is a 3D Printable toy series where miniature buildings and vehicles are stored within a purpose designed case until…
Rev C Update 1/20/22: Added a beefier grip, and adjusted the mode height a bit for better printing (either 0.16 or 0.20 layer height recommended). Also updated the lens mount to what I've been using on other cameras. ---------- Light and…
Template with furnitures for your apartment Template with different furnitures for a new design of your apartment. Bathroom Living room Bedroom Kitchen Exterior and interior lines of various furniture on a scale of 1:50. Model printed…
A desiccant box to hold silica gel beads (Dry&Dry) for the Chitu FilaPartner E1 The model is for the back-left/front-right corners. For the other two, mirror the print. Printing: Prusament PC Blend, Standard Profile, 0.4 Nozzle, 0.2…
Post-apocalyptic Soviet apartment building (Khrushchyovka) inspired by abandoned Eastern European urban architecture.
It has a 4 story building, a 3 story building, and a 2 story building.
Updated! Based on user feedback minimum thickness has been increased to allow 4+ perimeters to help stop leaks.
Please click ❤LIKE❤ if you appreciate my work 😊 Bring your Monopoly board to life with this fresh, 3D-printed upgrade ! These models are designed to perfectly fit the classic Monopoly board , keeping the proper proportions and adding a…
************* This Model was made years ago for Thingiverse. While it still should print just fine, Be aware of scales or need to change support (Like the new Organic Supports!) It is a Remix, I have no idea where the original model is…
A delightful model of two standing hearts that can initially be separated (one for each of you), and then placed together for a beautiful sculpture. Included are a couple of tray designs as well that you can use to optionally turn the…
HO scale model of a 1930's-era garage and apartment that used to stand in an alley in Parkersburg, WV, featuring rusticated concrete block, steel casement windows, and an interesting set of steel stairs. Rusticated concrete block is…
Thank you for downloads, likes… Enjoy !
Any feedback would be greatly appreciated. Nozzle 0.4-1.0mm Layer Height 0.2-0.3mm (Recommended) Infill 15% Supports needed Scale it as you like :)
Remix: I only broke apart the original STL with the 3 parts in 3 STLs, so you can print them more easily with different materials (TPU and PLA/PETG). Print Settings Printer Brand: Anycubic Printer: All-metal Mega Rafts: No Supports: No…
I needed a generic looking 2 story building that could double as a Barracks or Apartment style building. Also works as a ground floor small building. As a Bonus the stair section also works with almost every other 1 story building as a…
Fun diy apartment or hotel building Have fun printing
These columns were created to hold heavy marble platforms. We call them turtle apartments. The apartments serve as sleep/hiding places and a platform they can stand on to get some air while still safe in the water. They are heavy so that…
I designed a simple apparment building somewhat inspired by the infamous Faller B-906. Buildinginstructions included in the PDF.
Print made by the project to realize how il will be - 1/100
Stackable House – Modular Building Set (H0 Scale) I designed a detailed stackable house with plenty of small features and fine details. The model is designed in H0 scale (1:87) , making it ideal for model railways and miniature scenes. Of…
A neat little protractor that doesnt fall apart for measuring all those odd little corners in life. "This is a protractor for measuring corners. For instance it can be used to determine the angle between two walls. It has the advantage of…
A case for a digital hygrometer for replacement of the "Passive Humidity Indicator Paper" in the Chitu Systems filament dryer. Suitable for the widely available and cheap hygrometers, e.g. at AliExpress . Parts: Front housing (with…
Diese Figur ist ca im Massstab 1:24 und ideal für Resin Druck
This is a remix of DtM-v3 but with 4 holes 80 mm apart as per ISO 838 (888 extension).
Easy to print Have fun printing can be used for selling purposes
Napoleon Bonaparte 3D model ready to print.
Cool apartment building shaped bin for storage.
square, circle 20 cm, three colours: To create a spring and Easter mood in the apartment.
LEGO Napoleon Bonaparte minifig
My daughter lost some of the bolts for the plane and it couldn't be put back together. I copied one of them as best I could in Fusion360.
Statue of Napoleon Bonaparte Powered by MakerWorld-Image-to-3D ( https://makerworld.com/makerlab/imageTo3d ) See my other Statues here: https://www.printables.com/@StudioMechanik/collections/2993601
Mine is printed with Prusament PLA Recycled, I think this is the less toxic material(?) Since photographed I have painted it to reduce UV radiation. Placed in a shadowed place. Pls let me know if you want a different mounting. Prints well…
A parametric pull-apart capsule generator for the kind of little parts boxes that things like contractor bits come in. Ideal for keeping small tool bits safe in your bag. TIPS: when customizing, adjust the detent period and nest ratio…
Collection of mounts for the Qrome Slow Stick or other RC plans with (2) 8mm carbon shafts spaced 15mm apart.
free model of napoleon bonaparte bust
Silica Gel Desiccant Box for Chitu Systems FilaPartner E1 This is a custom-designed desiccant container specifically made for the Chitu Systems FilaPartner E1 filament dryer. It helps to keep the humidity at a minimum inside the chambers…
Not much to say here. I think the pictures speak for themself. I just wanted a little bit more storage and lifted the Filapartner a little bit As I'm not exactly sure how warm it gets under the base of the dryer, I recommend PETG.…
I made a quick release keychain that can be pulled apart by a little force. Use it to easily attach to belt, key ring, key chain, backpack, bags. Also can be used in sports equipment, pet products, etc. There are 2 variants in the file !…
Made this loading tool for @JasonEnglert_817600 Silica gel bead (Dry & Dry) desiccant box for the Chitu FilaPartner E1. https://www.printables.com/model/1407973-silica-gel-bead-drydry-desiccant-box-for-the-chitu I was having trouble…
Napoléon Ier Bonaparte – Buste 🇫🇷 Description (Français) Ce buste représente Napoléon Ier Bonaparte , figure centrale de l’histoire française et européenne. Il est directement inspiré du portrait Portrait de Napoléon Bonaparte, premier…
“This intricately detailed 3D architectural design for Bakeri Groups’ Sarvesh is a fully assembled, 3D-printed model. It offers an immersive experience of both the exterior and interior, providing a realistic preview of the forthcoming…
A friend asked me to print some name plates for his apartment building's mailboxes. I'm writing these instructions for myself, in case I need to print more later. You can use this model to make different sized signs with text – just…
Please click ❤LIKE❤ if you appreciate my work 😊 Give your Monopoly Super Electronic Banking game a brand-new dimension! Instead of abstract cards or tokens, now you can physically see your investments on the board. This set includes: 🏢 7…
🦎 Lizard Apartment – Terrarium Background for Small Geckos & Lizards Turn your terrarium into a luxury lizard neighborhood! This 3D-printable “Lizard Apartment” is designed for small species up to around 20 cm long – perfect for geckos,…
lego train side rods use them for a pannier tank engine i guess
AzureFilm has a nice idea where you can just refill spools - IF you have a spool which is refillable, unfortunately I had one that was made from just 1 piece, not the one that can be taken apart. So I decided to design this part in…
A replacement Nut for the Battat Take Apart Toy Vehicles (my sons is the crane). You can make replacement screws from this model by Stello101 . The part prints easily and works as good as the original, although the original is a bit poor.…
this is a super easy (but long) print that's great for any sort of model set up! you can also just cut it down or duplicate it and build it up if you need.
This adapter makes Polydryer boxes fit the base of the Chitu systems Filapartner E1. If you own polydryer Filament boxes you also can use them on the Chitu systems Filapartner E1 to dry filaments. Saves deskspace and some say the Chitu…
Little TPU plugs for the 4 holes in the bottom of the dryer boxes. Printed in CC3D 72D TPU. I recommend printing sequentially. Once inserted, you will need to push them out from inside to get them out. Printing: Orientation: Print them…
I needed some room key tags, so I created one whose text I can easily change if necessary. For a better contrast, the filament must be changed.
This is just like my other apartment building model except this time it has stairs at the bottom! you can scale it as needed to make models for trains cities or anything else!
This Remix is a THANK YOU for supporting my country after the earthquakes strucked on 06 February 2023. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.2 Infill: 10 Category: Buildings &…
Designed in minutes with UKSTL STUDIO. Simply choose your building style, customise the layout and details, then export ready-to-print STL files. Create unlimited unique buildings for your tabletop in just a few clicks. Each floor is…
This is to train your finger strength for climbing. An alternative to expensive finger boards that require semi permanent installation. Print two, one for right hand and one for left; full width is good for 4 finger drag. Space out along…
Remix of Molle Granade Holder by NoX the FoX : What did I remix? I brought the inner walls, in so that the Lil Dude 6 mast will snap into place and in theory, I could operate tacticool ham radio from my bronco, with the tailgate open,…
This bolt/screw is a replacement for lost retainers and is compatible with all the positions on each vehicle. It differs in that it is designed for easy printing, and the screw thread is faster to attach for little fingers. I hope it will…
Este modelo, esta pensado para ser impreso a escala 1:200. los ficheros STL que he puesto no obstante están a escala 1:100 (yo los he impreso aplicado un escalado de 0.5 en Cura). He cometido algún error como la celosía curva del murete…
This container holds approximately 21g of silica gel beads and is designed to fit snugly into the corners of the Chitu FilaPartner E1, making full use of the available interior space. Filling A matching funnel is included in this model,…
Customized nameplates for the GigaParts Explorer Deluxe Battery Box. This will also work on the Harbor Freight Bunker Hill .50 Caliber Ammo Box and similar. This product will drop right into the center space. It can be attached with…
This stylized mini figure captures the iconic moment from Terminator 2: Judgment Day where the T-1000 is torn apart in the steel mill. Recreated as a fun desk figurine, it’s a dramatic, warped snapshot of the liquid metal antagonist…
just use what ever settings you want and the apartment does not have any furniture inside of it if you open the door. also this was made using tinkercad pieces
After you've gone in for a replacement for the original spool holder (I replaced mine to make room in an enclosure), you are left with the original spool holder. A build here on this site provided the basis for this remix. This one simply…
With the latest events in Israel I had to print something so we can lock the apartment's protected room / shelter room / MAMAD door from inside. I upload it here so anyone who needs it can print it as well and feel more safe. The part…
Bought a generic Brake Calliper Rewind tool supposed to be compatible with Ford models. Pins on the adapter (2 options) were both too far apart. This is an adapter plater for pins 20mm apart centre to centre. The Halfords near me, only…
Inspired from the divided model wich could be easily joined with a peace of filament, I made a model that could also be seperated again. The length of the filament is defined by the groove on the female adapter. O-ring size (inner…
Key sleeve to keep keys apart. Simply slides on the key and the snug fit will keep it in place. Specifficly designed for DOM key's but could possibly fit on other make's too. I suggest printing it with the opening where the key slides in,…
This is great, and the right size for you to add to your board games as terrain features! Please download and like
"Insect hotel" in form of a insect apartment, so the insects also have the option to live in cozy apartments. For those who do not have natural materials at hand the model can be used “as is”. For those with wood elements at hand: add…
***DO NOT SELL*** ASK ME ABOUT TERMS/CONDITIONS ABOUT SELLING This is an amazing sculpture of one of the best rulers of France in all of history. Intoducing… NAPOLEAON BONAPARTE!! This design was by Powered by MakerWorld-Make My Statue…
Feel free to change numbers to fit your needs. Printed on Prusa Mini+ / 0.4 / PLA . Print with 0.25 nozzle for better results.
it does in fact fit! use it for a pannier tank engine. i made this because the one i made from scratch didnt work
💖 Support Me If you like this model and want to use it for commercial purposes, you can support me on Patreon and get a commercial license: https://www.patreon.com/cw/MonsieurPierre A refined figurine inspired by Napoleon Bonaparte, one…
The 2-part plate, included here, is intended to allow people to build a fully assembled “SPIES” puzzle by Alfons Eyckmans, without revealing the solution. This permits the builder to then discover how to take apart the puzzle. This can be…
Screw for “take apart” toy, specifically dinosaur. Printed with PLA. Consider printing the screw horizontally with supports for better strength.
A simple insert to store both the Bohnanza cards and the Bohnaparte expansion cards and tiles in the original Bohnaparte box. The first two (deeper) card slots hold the original Bohnanza cards while the third (shallower) spot is for the…
Two identical pieces snap securely together to form a ball. When putting it together you have to make sure all four lips are simultaneously over the opposing edge. Then it will slide and click into place. Taking it apart can be a little…
From Homestarrunner.com comes the Cheat Commandos Reynolds apartment playset. Converted from a print n' fold playset. UPDATE: updated taller refrigerator, closer to the original Comes with all the Reynolds action accessories Easy chair…
I've made a detachable Keychain, just add your own rings and keys. I've printed in PLA and PETG, the picture shows they are interchangeable, black being the PETG and Orange being the PLA. Tried to keep it small enough to not bother being…
Quick print to label the extra sets of keys for the new buyer of my flat. Optional filament change for text/border to be a different colour. Change needs to be at 2mm or layer 11 (if sliced at 0.2 layer height). Print Settings Printer…
I use the Freeman KEYQC3 Pull Apart Coupler Keychain ( https://www.amazon.com/gp/product/B077CSHG3N/ ) for many of my keys. I typically attach the female end to my house keys and use the male ends for my car, motorcycle, and bicycle keys.…
This is a bolt for the take apart toys similar to that shown in the picture. Few iterations and got the perfect size. I printed with support but I think it should survive just bridging - the supports were REALLY hard to get out so I would…
This wall chart will be much better than the classic from the Czech Republic in the form of a paper flip calendar with individual weeks. The name tags are blank, you can add the desired text to them in the slicer. For maximum capacity,…
Umm.I design it because all of racks at shop are too ugly? But it may just good at looking Make it and post that me know.
Apartment friendly (no drilling or permanent adhesive/drywall and paint removing tape) wall plate for 50mm smart buttons. These are the buttons I used . Hole in the center is for removing the button when the battery eventually needs to be…
These are some apartment block skins for a 15mm miniature storage case I have built to house my 15mm miniatures that I use in my Judge Dredd Roleplaying Games. They were designed to be glued onto any structure to create brutalist housing…
This is a simple planter system for small indoor plants (i.e. succulents and cacti) with fun details that make it stand out such as a staircase and doorways. More additions to the system are planned for the future, but they are all…
Command your desk with this legendary emperor brought to life through stunning 3D print technology! This meticulously detailed Napoleon Bonaparte STL model captures the iconic military leader in his classic tricorn hat and naval uniform,…
This project showcases the transformation of a 2D concept into a detailed 3D model, highlighting modern urban design and street culture elements. Ideal for those interested in creative architectural modeling.
Add a touch of history and commanding presence to your workspace with this Napoleon-inspired monitor buddy. Featuring his iconic military uniform and unmistakable bicorne hat, this collectible captures the ambition, confidence, and…
Baker's dozen number plate for apartment. Consists of 2 parts. There are holes in the front, pins in the back, align and glue (if necessary). I managed to fasten them together without glue. The number plate is not screwed, but glued…
