430 models
A simple remix of the MKII applicator for superlube tubes. Like the MKII simply insert and then twist until resistance and then apply the lubrication. Use the lid to cap off the applicator end.
Print approx. €0.97–€1.18 excl. taxPreliminary estimate for PETGSource material: PET
My wife decided to try and use Diatomaceous Earth to rid our house of some tiny silver fish. The powder is cheap enough on the big A, but the applicator was like $10 USD. Firing up FreeCAD 0.20 was able to design a two part applicator the…
Print approx. €2.07–€2.53 excl. taxPreliminary estimate for one variant
figurka pokémona applina
Print approx. €0.50–€0.61 excl. taxPreliminary estimate for one variant
This is an adjustable grappling hook whose hooks can be adjusted in angle and fixed with an insertable plug. There are thin and slightly larger hooks as well as the step files for your customisations. Print the centre part of the…
Print approx. €1.48–€1.81 excl. taxPreliminary estimate for PETGSource material: PET
An easy to print part for easier syringe application. Fits perfect for Faslodex 250mg
Print approx. €0.61–€0.75 excl. taxPreliminary estimate for PETGSource material: PET
An AvE style warning sign with attitude for the petrol engine enthusiast add blinkenlight and chooch to where it's needed Size The model measures approx. 45mm x 45mm x 0.65mm Manual Multicolour This print uses manual multicolour with four…
Print approx. €0.21–€0.26 excl. taxPreliminary estimate for one variant
Tool for installing 1/4" double-sided Goof plugs. Print 1 of each, CA glue small piece into bottom of larger piece.
Print approx. €0.09–€0.11 excl. taxPreliminary estimate for PETGSource material: PET
Hello, Today I have an Extension cord holder for you. It is suitable if you want to fix the extension cable somewhere. It fits perfectly for the standard extension cable profile, which is 41x53x150 mm. It can also be used for other types…
Print approx. €5.55–€6.78 excl. taxPreliminary estimate for one variant
Revised to allow printing without overhang and minor geometry changes.
For the easier application of static grass on the model of railway, I created a model of grass applicator. For more details, check the article: https://blog.prusaprinters.org/3d-printed-railways-size-h0-187/ Print instructions Everything…
This model is based on a gift my wife gave to me several years ago - a stainless steel gravity/grappling hook. )If you are interested you can find the stainless steel version on amazon here: https://a.co/d/5YDCH3A ) Gravity hooks can be…
New version available ! I made a remix of this grease packer so it can be be used to quickly and easily apply PTFE grease to 8mm lead screws. Specifically fit to the Super Lube 21030 (3oz) tube so I can get it on the rear lead screw on my…
Mr. Lube is a tool for lubricating 8mm “Z” axis drive screws. It is designed to attach directly to a “Super Lube” 3oz tube (m14 x 1.5 thread). I’ve included a cap that seals the tool and has a male thread in the end to store the standard…
Background I recently got a xTool S1 laser machine and was looking for a solution to get rid of the exhaust gases to have the machine run in my flat. Idea I checked the most common resources on the web and found some window exhaust…
I printed this with 1.2mm walls and 10% infill, and used some double sided mounting tape to stick it on the back of my appliance. It should accept a variety of cord sizes with the two knobs providing a way to hold the loose end.
If you accidentally throw it away, here it is without buying it again
Cord Wrapper, Flat or Curved Surfaces, Variable Diameters 4-14 in (100-356 mm). Secures flat or round cord (.25 in/6.3 mm diameter or 5/16 in/7.2 mm). If this isn’t exactly what you’re looking for, check out my other design here that…
plunger rack for syringes for controlled dosages. A second ring above can be used to lock the plunger in place.
Needs only approx 2m of filament (6g). Suggest to print with 6 walls to avoid infill on the spatula. One STL file with tray and spatula, can be split into individual objects in slicer.
UPDATE 05/08/2025: added a variant for 11/12 speed chains (thanks @GrzegorzZ) UPDATE 28/07/2025: after further testing and reviews the model geometry was updated to avoid wicking lube to the sides This is an applicator for Squirt Chain…
The Screen Protector Application Aid is a tool to help you apply a screen protector to your iPhone 15 Pro or iPhone 15 Pro Max. It is designed to be easily 3D printed and makes the alignment process a lot easier. Just clip it on your…
The photo above shows the oven The fridge in the photo is from here: https://www.printables.com/model/72701-fridge-with-doors-that-open-and-fridge-props
Lost my applicator after getting back after shopping. 3D modelled an alternative. 30min print and you don't have to go back to the store. Print settings: Tolerances Modelled for 0.6mm nozzle while using PLA with Prusa MK3S+
The Assistive Nail Polish Applicator aids users with low pinch strength to open, apply, and close nail polish. The device can be held by hand, worn on a finger, or worn over the hand. Print Settings Infill : 20% Resolution : 0.3mm…
The design uses 2x1 gridfinity tiles and has space for 2 dispensers side-by-side, so it can dispense both baseplate and bins magnets. Print settings: Printer: CRS-10 Pro Material: PLA Layer height: 0.2mm Nozzle diameter: 0.4 mm Infill:…
Thanks for downloading in advance and please don't forget to like this modell!
Use this to apply “phase-change” pads (PTM7950 and others) to your AM5 socket CPU. How to Place the Mask on top of the IHS Place your PTM pad Remove transparent protective film from the PTM pad Cut the pad with the Cutter Remove Cutter…
This is a small grappling hook for the Lucky 13 figure! It's also one of my first remixes, it's pretty crude, but it will fit with Lucky pretty well, it has the perfect edge to edge length on the grip to fit into his “grip” hands. It,…
Ahoy, Fidget Lovers! Meet your pocket sized adventure buddy: the Fidget Grappling Hook! Spin the ring, flick the flukes, latch on to things, and let your imagination scale new heights. Why You’ll Love It Easy print profile, Everything is…
Epoxy mixer tray and applicator for one time use. Stackable for easy storage of larger quantities.
(V2 is available here: https://www.thingiverse.com/thing:6168143 ) Recently I saw a useful hand tool, to easily and quickly apply a masking tape. This guy has made this tool to be sure to apply the masking tape parallel to the edge.…
I made a remix of this grease injector and cap , so it can be printed faster . It's specific for the Super Lube 21030 (3oz) tube. So now the cap and the injector are shorter, so you save time and material. You have 3 profiles: 1 injector…
Print Settings Printer Brand: Creality Printer: Ender 3 **Rafts:** No Supports: No
For the easier application of gravel on the railway model in H0 scale, I created a tool where you can pour the gravel and applicate it easily on the railway. Check more info here:…
This 3D-printed Furniture Wedge Set includes five precise thicknesses (1 mm, 2 mm, 3 mm, 4 mm and 5 mm), designed for a wide range of household, workshop, and DIY uses. Each wedge provides an accurate, reusable solution for leveling…
I have added a functionality to my masking tape roller. https://www.printables.com/fr/model/907403-masking-tape-applicator I have had to paint a door for one different color on each face. To do this properly, the edge between each face…
Speaker Adapter for JL Audio Woofer
This part can be attached to any appliance with a flat surface via double sized tape to allow you to wrap and trap the outlet cord for convince.
This is an needle applicator tip for the Super Lube 3oz bottle (with M14 threads) as well as a new cap. I'm using the 92003 Super Lube, but any bottle with M14 threads should work. I needed an easy way to get a small amount of grease in…
Caps off a standard UK appliance waste fitting (e.g. dishwasher, washing machine) when the outlet is no longer needed. Printed at 15% infill, 0.15mm layers, no support. I used PETG but PLA would probably be OK. I used ironing to ensure a…
Bottle labeling tool with simple design.
I needed to lubricate some LM6UU bearings so I remixed the original LM8UU adaptor so I could use the lubricant I got from Prusa when I bought my printer.
No need to spend $100+ on a label applicator for your 5 oz glass woozy hot sauce bottles! With this simple tool, you can apply labels quickly, accurately, and consistently - without the high price tag. How It Works: Insert your bottle…
This model is compatible with the lego system.
Glue mixing applicator sticks for epoxy. Seven various glue applicator sticks for epoxy mixing and application. They are 60mm long but they can be scaled to any size required in your slicer software. Quick to print. Printed in PLA with no…
I made this little buckle fastener as sparepart. Print information: Printed with PETG 80% infill layer height 0,2 mm printed with organic supports
This is a Remix of : Grappling Hook - Unchaterd 4 by That3DPrintGuy Only minor tweaks and scale set for easier printing, all design credit to That3DPrintGuy for a great moving model that looks awesome !!!! Be careful when gluing the…
Vor- und Nachteile auf einen Blick: + maximal große Lüftungslöcher, mit Schutz vor Kleinteilen wie M1.5 Schrauben + LCD Display verwendbar (Sense HAT und 30 bis 50 mm Lüftervorbereitung nicht getestet) + Kamera und Displaykabel über…
Simple model/print which aids applying tape to bowling ball thumb/finger holes to modify fit and release. Printed Settings PLA 0.2mm layers, ~50% infill, 3 walls/top/bottom Had enough rigidity to do what I what I needed in the short term.…
It's not pretty, but hopefully it can help someone else out in a pinch. I've also included the Fusion360 file. Instructions : 0.2mm PLA Add some support underneath the lid. See starbond-ca-nozzle.3mf , it might be overkill but gets the…
This is a highly controllable superglue applicator inspired by the Loctite "Control" super glue applicator. This design can be used with any regular super glue tube. V2 is now optimized for 3D printing by filleting all the sharp corners.…
Epoxy Tray & Applicator Set Overview: Introducing the 3D-printable epoxy tray and applicator set, designed for efficient and convenient mixing of two-component epoxy glues. This versatile set includes a tray and two spatulas (applicators)…
This set includes three resin or glue spatulas with different flexible tips for achieving precise and even application. The flat, semi-round, and rounded tips allow for versatility in spreading and smoothing the resin, making them ideal…
Don't want to buy foam brushes because they're usually junk… especially the cheap one's. And your probably going to throw it out after one use anyway… Here's the answer… An inexpensive DIY foam applicator/handle. You'll be able to get 12…
This is a remix of Mark Rober's compliant mechanism blaster. Its stronger, and has a grappling hook!
"As soon as it's born, it burrows into an apple. Not only does the apple serve as its food source, but the flavor of the fruit determines its evolution." This model is designed for printing in multicolour (check out our YouTube video for…
Couldn't find a Super Lube Applicator with a pointy tip, so I made this. The end may need to be snipped off depending on your printer's cooling. You may have to use a lot of force to get lubricant out, since the end is so small! Used this…
I made this adapter for SuperLube 85g greese tubes. It screws right ontop if the tube, then you can screese greese out to appli to thread screws. No need to get your hands dirty ;) No need for support! Printed with a Kobra 3 Combo in…
Fast print and quick solution for the messed up cords on closet and storage room. Obs.: pint with the side face down. Add a cellphone cable Add a single file STL
This model has been adapted for Lucas White Lithium grease 8oz which is pretty common in US hardware stores. It has a cap so you can leave it on the tube and a plug so you can seal those thing up when removed. No supports needed.
Was the model/idea/guide helpful? Support us on Printables . Sharing or selling our digital files is not permitted. These remain our intellectual property. To obtain permission to sell physical prints of any of our designs, please…
usage one rotation moves the plunger 7.5mm which is 0.5mℓ so you can suck or apply tiny amounts of liquid or paste - for fluids in microscopy/glue/silicone/solder paste/paint mixing/nail polish/grease/sugar icing or in molecular…
Attached is 25, 32, 40, 50 and 60 mm applicators for round bases. Attached is 60x35, 75x46, 90x52, 105x70 and 120x92mm applicators for oval bases. Also attached is the OpenSCAD file if you want to modify. Want another dimension? Alter the…
I designed this to rescue quadcopters / multicopters from trees. You will have to make it heavier somehow so that it flies better. The V2 (green in the pictures) has holes in the front where M5 screws and nuts can be used to make it more…
I wanted to pack the bearings on my rails from the back through the m3 holes but I had cut the tip to short on the white lithium I had. Figured I'd check printables to see if someone had already made an adapter for the squeeze tubes like…
WireWrap is a thoughtfully crafted 3D design, created to prevent my toaster cable from faling onto my nose (again) when I retrieve it from the shelf. While it's perfect for the toaster, it's versatile enough to manage cables of other…
I took the V3 SE rails mod and applied all the changes from the comment section. @RainMk_1581311 flattened the model for aesthetic reasons, and removed the tall “guides” that sit around the rails, which possibly restrict the carriage…
Magnet applicator for both poles marked + and - . Dimensions are available from 4mm to 10mm for a depth of 2mm and 4mm to 15mm for depth of 3mm. If anyone would like deeper or larger just say I can adjust and share. The depth is measured…
The knobs on my stove broke so I created new ones. The width of the pin it pushes onto was 6mm on my stove, however I have made multiple sizes. Free for personal use, if you would like a commercial license to sell this model please check…
Speedometer cable clamp Honda Transalp 650 - AfricaTwin 650/750 - Morsetto Cavo contachilometri Adatto per/Applies to Honda Transalp XL600 and XL650 - AfricaTwin RD03 and RD04 Codice parte originale/Original part number: Honda…
This is a simple easy-to-print grappling hook that can fit into your wallet. I was able to rap a little over 15 feet of string, V2 has slightly more room for string better tolerance, and a slot for the string to fit into. Check out my…
This is an applicator tip that you can use with 3M's Loctite Silicone Sealer tubes. I was using it as a replacement for the included tip, and to get a nice small bead for some crafts projects. You can increase the bead size by cutting off…
IF YOU LIKE THIS MODEL, CHECK OUT MY OTHER MODELS AND SUPPORT MY PAGE Patreon at https://www.patreon.com/pixelchronicles ! Pokemon inspired, Applin, Tabletop DnD miniature with or without 20mm medium base which can be used for DnD and…
Hello everyone, This is my first model and although simple, it's very useful. I used these small tools to get Bondo into tight spots and press it nicely all over my 3D print.
Lost the applicator to the scrubbing bubbles fresh gel toilet bowl cleaner. Made a replacement. Supports required.
I needed a simple sealing ring for my garden sprayer, so i printed them with soft TPU. You can change the Dimensions like needed in the slicer-software. Original has 8mm innerdiameter and is 2,8mm high. 0.18 Layer TPU Print it with 3 Shells
Designed for a vertical freezer door. Use Pan-Head screws to secure it. Stainless Steel would be best. The screws will easily penetrate the metal outer layer of the door. Don't over-tighten.
Hello everyone! I'm bad at modeling! I threw together yet another grease applicator, but this one has a 90 degree bend so there's no need to remove the bearings from the Y-carriage to reapply lubricant. For 8mm bearings, 3oz / 85g Super…
I often use small amounts of epoxy glue for various projects, be it to attach 3d printed parts or small repairs and such, so I made a small mixing tray with an attached applicator/stirrer. Dont now if anyone else finds it handy, but here…
Designed in the same design language as the K1, it accommodates 5pc and the design highlight is the possibility of adding trim panels. A more practical version will be updated later, perhaps without screws? Screws M4*10 Here's the video…
Decals - water based application set. Easy way to wet and apply decals for models. Designed my own version as I wasn't happy with store brought options. This comes in two parts .the BOTTOM is were you put a small amount of water and the…
Hardware List: 2x 4mm x 45mm pin - door hinge and grapple dart mount 2x M4 x 10mm thumb screws - door closure 2x M4 nuts - door closure 4x M4 16mm set screws - gear box cover 8mm x 30mm pin - spool axle N20 micro gear motor (12v) Micro…
J'ai créé cette applique Murale pour se placer sur des connecteurs DCL sans avoir à faire de trou et qu'elle soit orientable. Impression en 2 parties : Imprimer d'abord la fixation pour voir si elle fonctionne avec votre prise DCL, j'ai…
WARNING: THE USE OF THIS MODEL INVOLVES WIRING MAINS VOLTAGE CABLES (240 V IN THE UK). DO NOT PROCEED IF YOU'RE NOT COMFORTABLE DOING THIS! I like to be able to switch on/off electrical equipment in groups that are only ever used…
I didn't want to buy a whole set of shackles for the hook, so I just designed one to use with a M4 Screw. I printed it with PETG and 100% infill for extra strength, but you could definitely get away with using PLA. I used a M4x20 screw I…
This is a smaller version of Bader's Flexible brush. I needed something smaller to apply glue to small pieces of wood.
🍎 🐛 A quick, simple model based on the Pokémon Applin , made from scratch in Fusion. It's very easy to print. Comes split in parts for printing separately by color and assembling later with glue, which is necessary for a permanent fix.…
This is modeled after an off-the-shelf product. It is to use with adhesive on a caulk gun for installing cove base moulding, but could be used with spread any other kind of construction adhesive applied with a caulking gun.
This is a practical experiment of 3D printed bearing, https://www.printables.com/model/441865-3d-diy-gro Please refer to photo for assembly instruction. Chassis require a large print area, at least 300x300. Shut with machine screw: 10-32…
K1 Max versions .Designed in the same design language as the K1 Max, it accommodates 5pc and the design highlight is the possibility of adding trim panels.
I was looking for a grappling hook for our Christmas elf and didn't like any that I found so I tried to make my own. Its my first design so please be kind. No supports needed. Print in .1 resolution. Higher resolutions may cause fitment…
Here is a lotion applicator for those hard to reach areas (back, etc). Comes with a folding and a straight applicator handle and a tpu applicator pad. Could be used for scratching and/or exfoliating. I printed it at 120% because I had…
A quick and dirty jig intended to help with applying TapTo stickers to NFC cards. Nothing revolutionary about this, it basically just helps hold the card and sticker in alignment a little better than just freestyling it on the table. All…
Few tweaks to a model I found on thingiverse for a project for my school's robotics team.
This is a IEC 60320 C7 / C8 type appliance coupler protection or dust cover. It is used to protect the inlet plug of power supplies or battery chargers. I use it to protect my camera and DJI mavic pro drone power supplies when travelling.…
A quick stl to assist with the application of tube bandages to fingers or toes. When printing it you may need to brim the bottom and I used a custom support in the middle to help with the bridging of the top piece. Also worth checking it…
this is a fun cute little grappling hook that I made for cosplay. understand this is not recommended for actual climbing. hope you have fun with this simple model.
An alternate cap for the (static) Electrical Grass Applicator. I prefer a metal mesh as opposed to PLA. Print instructions Print this piece out, Cut some screen mesh to fit on the interior lip. seal with hot glue and screw on Grass…
