Counting matching models…
Material: PLA Infill: 10-15% (honeycomb for me) Perimeters: 4-5 No layers top and bottom NOTE ********************* 29/09/2025 Its new companion Cell Stand , made in the same style, will be the new cell phone holder on your desk. For…
Working from home often results in beverages and computer equipment sharing the same desk. This is a perpetually hazardous arrangement (and I speak from experience). This design is for a cup/drink holder that places the beverage below…
New options: Split versions for small printers and new mid part to improve stability when collapsed (see updates below) Also modern laptops and notebooks get quite hot if standing flat on the desk and the vents have to work harder than…
Hose adapters for all common (at least what I could find online) hose sizes. All adapters have: Each size has an option of Outer Diameter measurement or Inner Diameter. Outer Diameter (OD): Intended for the printed tube to go inside your…
The Polymaker spool adapter is designed to help your cardboard spools print more consistently by reducing friction and creating a structured rolling surface. The spool adapter clips around the face of the Polymaker cardboard spool and is…
Inspired by https://www.prusaprinters.org/prints/63523-laptop-stand I created this stand that raises the laptop a bit higher. It is compatible with Prusa Mini and I printed it with Prusament PLA Galaxy Silver with 0.2 layerheight, no top…
Update 1: Added a version with a longer front lip that fits better if your monitor has curved or thick bezels and fixed the weird slicing bug that added strange lines on top of the model. Update 2: I now recommend printing the…
Check out my profile for the laptop stand V2 with a larger angle. connect version Drill version
This is an stand for an latop iPad and an e-book with al hexagonal pattern. There is also a solid version if you prefer a cleaner look. If you want to modify it to fit perfectly on your devices follow these steps. Measure the width of…
A flexible velociraptor! How cool! This is a very flexible (with 19 joints!), print-in-place model I spent a long time designing. A lot of attention to detail is in this model, and a few of the smaller tail links are weak due to their…
UPDATES: 12/2021 "A" parts for small servo "B" parts for big servo 03/2024 Improvements on the following parts: Body L and R, Case Holders, Gear 1 and Rear Frame R. 05/2024 improved design, ready to print plates, new parts and updated…
Fully parametric folding laptop stand designed from scratch in Shapr3D. Set your display size and the model updates automatically; a thickness variable lets you tune looks and material use. Adjustable height via angled notches with a…
EDIT: I have added 2 more variants of the kit (looped and un-looped) with the main fuselage flipped round the right way. Should remedy any confusion, but keep in mind the very thin footprint at the rear! The F22 Raptor is a 5th generation…
This adapter allows you to use Meta Quest 2 head straps on the Quest 3. Instructions: Download under ‘model files’ and print with supports. Enjoy Haydn Bao Design notes: From v4 to v5, the geometry updates are minor. There's just a few…
This is adapter that relocates the PSU power switch on PRUSA CORE One (and CORE One +) to more accessible location. I'm happy with how the adapter works and if you also have trouble reaching the back of the printer, I'd be happy for you…
This adapter system wraps the edges of an ESUN 1kg 199x62mm cardboard spool in order to: provide smooth rotation within a Bambu Lab AMS prevent carboard debris from depositing within a Bambu Lab AMS Features: Reusable ESUN nameplate for…
UPDATE!: I have revised the original Overture Spool Adapter based on feedback and experience after creating my Polymaker Spool Adapter. Version 2 of the spool adapter works just like the original except, I have added the small retention…
UPDATE : I had issues printing the honeycomb when the two pieces were not aligned 100% the same. Caused an issue when I inserted the 1/8" rods (not being perpendicular) So, I added three 1/8" holes that would always print the same place,…
Want to reuse toys you already have in a new way. Why not challenge your fantasy by making gigantic bridges and ramps with wooden trains (like Brio or IKEA) with help of simple Duplo bricks. These adapters will make this happen! I got…
Please leave a like if you enjoyed the model or it helped you. :) Remixed from : https://www.thingiverse.com/thing:4715615 Started off by making it a bit easier to print by adding a slopes to some of the overhangs. Then ended up taking…
SIM Adapter Kit Card Simple set of SIM adapters in kit card form. Nano to mini Nano to micro Micro to mini Prints quickly, with no support. Snap out the one you need. Print at 0.16mm (0.2mm initial layer height) for best results. Take…
Vertical laptop stand with different options for an inner gap to fit variable thickness. The model is printed in 4 parts to avoid supports and to have nicer surfaces: 2 sides and 2 bottom brackets to hold everything together. Assembly…
The Velociraptor Head is a little more complex to print than many of my other animal heads because the teeth require support. You will probably also want support for the back of the jaw, but this model printed fine for me without support…
📝 Description 🔒 This model is protected by copyright If you want to sell physical prints, check the subscription here: 👉 https://www.patreon.com/cw/Nieuchronny Cute mini velociraptor 🦖✨ Part of my mini figurine series – small, detailed,…
Adapter folded from two parts to limit the use of supports DeWalt battery adapter You will need: 5x M3 - 15mm screws 2x male connectors and wires
Updates Have a look at the new slim version! Description This is a set of snap-in spool adapters designed for the OpenPrintTag . Some filament brands have oversized inner spool diameters, which makes the OpenPrintTag unable to stick in…
It does make noise, you cover the right hole on the chamber and you blow.
vert vertical laptop stand designed with the 14 inch Macbook Pro, but you can adjust the gap size to meet your demands by scaling only the Y axis it has cutouts on the bottom for 10mm rubber feet update · i've now published separately…
Prusa released the printable parts for MK3s+ and the fan shroud is much better than the stock one of the Mk3s, so, for everyone who don't want to fully upgrade from Mk3s to Mk3s+ but still would like better cooling, I cut the second…
Simple tool for lubricating LM8UU bearings. Print instructions New version! We found a few things we could improve, so we did, as we always do :-) Screw the printed tool on the Prusa Lubricant tube, carefully put the bearing on and turn…
I split this design into two cards, A & B, so it be printed with smaller build plates. No AMS/MMU is needed since it is a single-color print. The overall size of the velociraptor is about 145mm tall once assembled. Each piece is about…
Update V2: I completely rebuilt the Duplo connector. I changed three things of the original "Minimalist Duplo - Brio, IKEA, Wooden Train adapter" with Tinkercad in order to fit my needs: I reduced the inside height of the Duplo connector…
https://www.buymeacoffee.com/augustas This portable and compact laptop stand is the ideal solution for elevating your laptop to a comfortable viewing angle while on the go. It is made of durable plastic and can be easily folded and stored…
Kleine Spulen passen nicht ins AMS. Bambu Lab gibt eine geeignete Spulenbreite von 50-68mm und einen Durchmesser von etwa 200mm an. Kleinere Spulen wie etwa die 250g magicPLA von 3DJake können mit dieser Adapterspule und den passenden…
Print-In-Place Folding/Expanding Laptop Stand that holds my 14" Dell Latitude 4500 Laptop at 45 degrees with zero issues. All interlocking parts are designed with 0.5mm gaps. Print instructions 0.4mm nozzle 0.2mm layer height 20% Infill 3…
Laptop stand with cables holes. In slicer remove top and bottom layer and add infill as wanted. I used honeycomb. For link I recomend use at least 45% infill. I use more than 2 perimeters to make it stronger. Material: PLA, ABS, PET-G,…
if you like this kind of stuff consider supporting me on my Patreon www.patreon.com/wekster
Minimalist Duplo - Brio, IKEA, Wooden Train adapter that you can use for connecting Duplo bricks with wooden train tracks to make bridges and slopes. The peg on the outside is modified a bit so it fits on a Duplo brick too. Print with…
Have you ever had a pain in your neck or back after a working day spent in front of a laptop? I had… Two pieces of plastic made my workplace much more comfortable and convenient. And Mr Neck is happy now. Try and let me know your…
✔ For more sculpts like this, and if you are able to support my artwork, take a look at my Patreon :) So, Captain America. Bit of a remake of the costume, since while I enjoy doing fan art I do want to add something of my own to it and…
This is a stylish laptop stand that allows you to use the computer at 4 different angles but also allows you to completely fold it for easier storage and transportation. Print two pieces and place them underneath your laptop. You can…
Overview Based on KAMP by kyleisah: https://github.com/kyleisah/Klipper-Adaptive-Meshing-Purging Part of KAMP is to adapt various printer functions to suit each individual print, rather than a global constant. For example only ABL probing…
The source marked this model as adult content.
16" Laptop Stand with Tray and Cable Holder Based on TVL 3D. support 16 inches laptops. More stability, better security to prevent the laptop from falling. Laptop dimensions : 355mm X 250mm X 14mm tested with MagicBook X16.
Made to fit snuggly so that it doesn't wobble. I also added some foam tape on the outside for even better fit. Confirmed fits 2015 Camry and 2019 Kia Sorento but should fit most 3.2 inch car cup holder. Probably should use filament with…
This holder for the Prusa Mini power adapter/supply, uses very little material and takes short time to print. It is designed to use with a countersunk screw of Ø4mm with a Ø7-8mm head. The two brackets provide great support and require as…
Laptop stand for my 15" Dell Vostro Two versions: with Dell logo without any logo You can also use the Fusion 360 (.f3d) source file with customizable inner gap via user parameters for other models. The inner gap for laptop is 23.5 mm…
Use Arachne wall generator or your walls till be too thin and split. If you have issues with the ring being too tight on the spool, you should print the test print I included to measure the hole and contour accuracy of your…
Universal 2.5" SSD/HDD to 3.5" HDD bay adapter. No screws required Supports side rails Recommended to print in PETG No supports required NOTE: Aligns the 2.5" drive to the center - not suitable for enclosures that have a fixed SATA…
Legendary F-22 Raptor. I continue my series of famous aircraft. This time I would like to present another legendary fighter jet. It's an American air superiority fighter, still considered the best fighter in the world today. Once again, I…
This is an old design and has now been replaced by The SENATE Check out the new design here: https://www.printables.com/model/513350-the-senate-ams-feeder-button-and-protector-for-bam This is a remix of Bambu AMS Feeder PFTE Adapter by…
this is a fine model of an f22 raptor not much more to say. the rudders can be pretty hard to print so maybe try scaling it up. Thanks, Enjoy! Print Settings Printer Brand: Creality Printer: Ender 3 Resolution: 0,28 Infill: 10% Filament:…
Simple foldable laptop stand for desk that can be folded and carried around in carry bag easily. Folds into 24cm X 6cm X 2cm size Offers 7 adjustable angles Compatible with laptops up to 15.6 inches in size Offers great ventilation for…
Vertical Laptop Stand Cradle up your laptop vertical and get your desktop neat. Designed for laptops and IPad/Tablets, put two devices on the stand at the same time. Adjustable Model the exported modular stand consists out of the base and…
For STL user : You can print in full but to reduce support cut at horizontal below the stand with a support blocker on the stand side starting at 2mm (full plate) Experience the thrill of aviation with this meticulously crafted model of…
About The Hydra - Universal Spool Adapter is developed specifically for Hydra but will also work well for the standard Bambu Lab AMS. If you use very narrow spools with this however, Hydra will work a lot better as the feeders are tilted…
Under desk laptop holder sizes from 20mm to 40mm fits almost any laptop Screws Filament Grippers
SSD or HDD adapter from 3.5" to 2.5" drive. You are going to need 4 countersunk screw M3x6mm for mounting drive to the 3D print If your drive needs the connectors to be in the same position as those on a 3.5-inch drive, it won't be…
Design I designed a converter for a 2.5" HDD to fit in my PS2 (with the network adapter, and the SATA mod) without it floating around. The bracket slides into place, where it holds firmly. Hardware All you'll need are some small screws to…
I've made this to fit my MacBook Pro 13" perfectly but I don't see why it wouldn't fit any other model. It also fits my Macbook Pro Retina 15". Print it in 3 seperate parts and attach them with some superglue. I've originally uploaded…
Printed without top/bottom layers and honeycomb to match the stand. I tend to max out the Z scale to my printer. 270mm gives a good fit to a 14" MBP. Be sure to adjust the density to match whatever look you're going for. Mine are 10%.…
Flip before printing. No supports required. I used wood screws 4.2x14 to mount the steering wheel. Update 06.04.2025: - added f3d project Category: Video Games
Tired of tangled cables in a messy drawer? This architectural diamond lattice organizer is designed to sit directly on your desktop or workbench, giving every single cable its own dedicated compartment. Instead of standard square boxes…
There is no need to follow the curved form of the bottom of the Bambu AMS. So this is a straightened version of Eldon's model. It has a bit more volume, is easier to print, no supports needed!, and I designed a stand to fill the trays to…
Slighlty modified version of a stand, with only slot 20mm wide.
I received a long-reach prune tool from a family member but they did not have a pole/stick to mount the tool on. I could not find anything that would fit that prune scissor tool, so I made one. Not sure what the brand of prune scissor is…
This little piece of plastic is able to TRANSFORM your AA-batteries to fit into Type-C slots. Its MAGIC!!!! Print instructions -
This adapter system wraps the edges of an OVERTURE 1kg 199x66mm cardboard spool in order to: provide smooth rotation within a Bambu Lab AMS prevent carboard debris from depositing within a Bambu Lab AMS Features: Reusable OVERTURE…
Prints upright with no supports necessary. Two small supports designed into the model. (should pop right out) Adding wires and connectors is up to you. Designed around the M18 Red Lithium batteries that I have. Cannot confirm fitment for…
A laptop stand for thinner notebooks. The v2 has a bit thicker bottom brace for thicker laptops. Category: 3D Printing
this is from Thing files for Thinkpad Laptop Support Legs by westy89 - Thingiverse I DID NOT MAKE THIS. not my photos either lol
simply clips on, no modifications or tools required perfect fit PTFE tubing is a friction fit, no extra parts required contains variants for 6mm and 4mm OD tubing can be attached and removed without unloading filament .step files included…
This is a remix, designed from scratch, of the great model created by Billie Palmer . It has the following differences: Made it longer, to better support small spools. Added a long support at the bottom side, which touches the bottom of…
Hi guys, after the disaster of ordering the M2-M3 BoboVR conversion kit today I decided to do a quick and dirty remix this great Quest 3 to Quest 2 Head Strap adapter by HB. (Many Thanks) It's far from perfect. USB cable has to go in back…
Replaces the PTFE holder (screw on compression thingy), with M10 couplers. You will need PC4-M10 passthrough fittings like these. https://www.amazon.com/gp/product/B01IB81IHG/ref=oh\_aui\_detailpage\_o00\_s00?ie=UTF8&psc=1&tag=tv-auto-20…
Description: Portable and Lightweight: Weighing only a few pounds, this laptop stand is easy to carry, making it ideal for travel or on-the-go use. Wide Compatibility: Designed to fit various devices, this stand supports laptops (MacBook…
I have investigated many different ways of adapting the CAMLOCK system to other vacuum hose dimensions, but the variety of diameters and hose types seems to be infinite. Sadly there is no one size fits all approach. In the CAMLOCK system,…
Update 16.12.23: STL files are now available English: A raised laptop stand with a honeycomb design. Additional I designed a fitting tray to hold the clutter of your desktop and a cable clamp that can bei fittet into the honeycombs where…
This adapter system wraps the edges of an ELEGOO 1kg 199x64mm cardboard spool in order to: provide smooth rotation within a Bambu Lab AMS prevent carboard debris from depositing within a Bambu Lab AMS Features: Reusable ELEGOO nameplate…
SNAPTOR, durable strength! Printed in one piece and activated with a single snap, the SNAPTOR is a compact clamp that’s always ready to bite. Its integrated preloaded spring mechanism is activated after printing. No screws, no assembly,…
This is the second version of the laptop stand with a larger angle. original laptop stand check out my profile.
Intro With this adapter it is possible to rotate the reel arm of the Ender-3 V3 KE and SE by 90°. As a result, the center of gravity of the filament reel is no longer outside but above the gantry bridge so that the latter is no longer…
This model of the Ford F-150 Raptor has working suspension and wheels that spin, doesn't require any support material and comes preassembled right off the buildplate. The only thing you have to do after printing is to snip off a few tiny…
This is an upgrade for users of MMU and who has (un)original drybox (also works with the Slim version). This system replaces the filament buffers. It's a project in development that I try to improve with the time, thanks for your…
This is my version of a popular soviet АПТЕЧКА personal first-aid kit commonly used in post-apocalyptic games (S.T.A.L.K.E.R., Metro etc.). The original aptechka I ordered from ebay is not suitable for anything else than display on a…
UPDATE 12-16-2022: Added support for Stronghold and AMOLEN 250g spools. ---- Eryone spools are a different size (150mm diameter), so I modified the original design in a couple of ways. This should work for any filament spool that is…
This is a J1772 adapter dock for the Tesla Model 3. The dock is inserted into the rear of the door cubby and holds the charging adapter in a forward-facing orientation. Since the dock sits in the back of the cubby, it only takes up a…
Fits Raspberry Pi 4 B and Hat (SenseHat) This Case also snaps to Domed Top from ... "Raspberry Pi4B Case for Noctua 40mm x 10mm Fan" Toggle and access for camera and GPIO and Toggle. Screws... Pi takes M2.5 (a set of 4 screws and nuts…
This is a Remix “Handle for Manual Rewind and Hexagonal Adapter for Electric Screwdriver” for an amazing project " Filament Spool Switcher & Winder " Design by @MiklosKiszely_486882 TO FULLY COMPLETE THE PROJECT, DOWNLOAD THE REMAINING…
360° Spinning Adapter for the Multifunction Arm Mounting System What you need Multifunction Arm mounting system (Small Arm System) Big Clamp For Small Arms This Spinning Adapter Side small-NUT-M3.stl (1x) screw-small.stl (1x) Hardware…
Allows you to use a 3.5 in HDD hot-swap bay with your more popular 2.5 in SSDs. ****Edit*** I added two new files v2, I rounded off the edges I think it looks nicer. ****Edit*** I've added a Riser so you can easily use the more readily…
This is a J1772 adapter dock for the Tesla Model Y. The dock is inserted into the rear of the door cubby and holds the charging adapter in a forward-facing orientation. Since the dock sits in the back of the cubby, it only takes up a…
This spool adapter downsizes a 72mm filament spool bore diameter - Sunlu, Anycubic, Crealty, Hatchbox, et al to fit the Bambu Labs' AMS Lite rotary spool holder. Tested on A1 Mini using default settings for any given layer height and…
Tripp Trapp adapter for IKEA TROFAST Mesh storage box. I tested with the french product ( https://www.ikea.com/fr/fr/p/trofast-boite-de-rangement-en-filet-gris-fonce-60518453 ) but it should work with one from any country. The dimensions…
Decided to make my own version of the M18 battery adapter. This is a bit more involved than some of the others on here. Its two pieces which can be printed without supports. It uses 5 M3 flat head screws and nuts to hold together. The two…
A fully parametric vertical laptop stand for one or more laptops (originally designed for the Framework Laptop 13 ). You can easily adjust the laptop thickness to support other models. I've included STLs for single, dual, triple, and…
If you enjoy my work, you can support me with a small contribution ☕ It really helps me keep creating and bringing everyone’s ideas to life: https://buymeacoffee.com/teo_211
Overview: Does not slip, even under decent pulling force Fits poles with a diameter of 6-~16mm Ring for securing the plant has a diameter of ~25mm Uses very little material I needed a clip to secure my tomatoes to a stick, but all the…
![[OUTDOOR] Prune tool adapter](https://media.printables.com/media/prints/99741c24-799a-48f9-81ad-7d21d16ab37b/images/10230847_aeebb432-ff55-44ad-b7fa-ea2dc29b048a_aa0281ba-a84a-4156-9187-a634c7b9f22d/img_20250713_150546.jpg)
