577 models
PRINT, ASSEMBLE, and USE AT YOUR OWN RISK Barbell collars can be cheap or expensive… I figured I could make custom ones for 3D printing gym enthusiasts! Two sizes are available in the zip folders: Ø2" will fit slightly loose on Olympic…
Print approx. €6.67–€8.15 excl. taxPreliminary estimate for PETGSource material: PET
I really liked Todd Pousson's design for an Olympic Barbell Vertical Wall Mount , but wanted to mount the barbell holder on a brick wall and use larger bolts to secure it. I designed the mount from scratch and added in the required holes…
Print approx. €1.96–€2.39 excl. taxPreliminary estimate for PETGSource material: PET
Lid for the 10 slot blade holder for Andis clippers: ( https://www.printables.com/model/208188-clipper-blades-holder-pet-grooming-barbers-stylist/files ). For Pet Groomers, Barbers, Stylists, Cosplay costume makers and Crafters. (T blades…
Print approx. €3.25–€3.97 excl. taxPreliminary estimate for one variant
V2 is updated to include 10Lb and 5Lb weights, a chamfered edge to make it easier to tell edge to edge plates apart, improved fit tolerances, and a bar with integrated gripping hands. Per izkariot_438646 's suggestion, I've also added a…
Print approx. €2.47–€3.02 excl. taxPreliminary estimate for one variant
½ inch to 13mm barbed pipe adapter. I use this to connect my solenoid valves to the 13mm irrigation pipe which I use for the garden
Print approx. €0.64–€0.78 excl. taxPreliminary estimate for PETGSource material: PET
Obviously you can change weight by bottle size, infill material and the amount of infill. Can be printed without Support
Print approx. €2.92–€3.57 excl. taxPreliminary estimate for one variant
As an alternative to bowtie or butterfly inlays I made this Barbell Router template. I included the inside of the inlays to layout the placement of the inlay. I sized the insides .1mm smaller for tolerance. Makes and Comments Appreciated!…
Print approx. €4.70–€5.74 excl. taxPreliminary estimate for one variant
For 45lb power lifting/Olympic bars , or bars with 28mm+ shafts, use “Barbell rack holder - normal 29mm bar” For 15lb smaller/curl bars , use “Barbell rack holder - small curl bar.” The other mount will fit fine for these, but this one is…
Print approx. €6.11–€7.47 excl. taxPreliminary estimate for one variant
This is a replacement for the Farberware vegetable peeler part that holds the blade. The old blade is use in the replacement part and a pause in the g-code allows the blade to be inserted into the part as it is being printed. The…
Print approx. €0.35–€0.42 excl. taxPreliminary estimate for PETGSource material: PET
Should be updated to reflect final model, contact me for any questions
Print approx. €5.31–€6.49 excl. taxPreliminary estimate for PETGSource material: PET
für Handarbeitsfiguren ( Fussballer, Sportler ) eine Stollensohle
Print approx. €0.86–€1.05 excl. taxPreliminary estimate for one variant
Inspired by the medieval world of Kingdom Come: Deliverance II, I designed a functional stand for the Philips OneBlade 360 that feels like it belongs in a craftsman's workshop or a noble's chamber. The stand combines stone-like elements…
Print approx. €0.04–€0.05 excl. taxPreliminary estimate for one variant
partage d'un ficher payer imprimable en PLA ou resine, support obligatoire
Print the barbell part 2 twice and use part 1 to connect the 2 pieces. Enjoy! :) Benchpress: https://www.printables.com/model/1003773-mini-gym-benchpress-my-pr-bench-press
Robert's simple, elegant design just needed a little tweak to keep my recycled plastic shopping bags from getting sucked out the window when I accidentally open it too far. My fix is a less-than-elegant TinkerCAD booger weld job.
I did a 5 color 10 h 40 min and 415 filament change test with my MMU. Maybe you will get more changes. Author: Creative Tools Website of the original: https://www.3dbenchy.com/ __________ Ich habe einen 5 Farben 10 h 40 min und 415…
Learning from my first design, this is a 2" barbell collar/clamp that is entirely print-in-place. No additional hardware required. I printed mine with a .6mm nozzle and .2mm layer heights – but a 0.4mm should work just fine as well.
This is the simplest barbell collar you'll find on the Internet! I hate complex designs so I made my own collars to prevent using supports, custom pins, TPU... Hope you like it!! If so please leave a like You'll need some easy to find…
A Barbed Devil perfect for your tabletop game! Want to access even more models not found here in Prusa Printers? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here:…
10 slot blade holder for Andis clippers. For Pet Groomers, Barbers, Stylists, Cosplay costume makers and Crafters. Slots are sized to fit blades similar to sizes 000 or 3 1/2 (T blades will fit, but will knock into other blades. See…
NO GLUE → https://www.printables.com/model/388142-rose-no-glue FILE GCODE 🌹SUPER ROSE🌹 Nozzle 0.4mm Print 0.2mm Infill 15% Support ❌ Brim ❌ Here are all our plans, take a look. Qui ci sono tutti i nostri progetti, dacci un occhiata. 📃→…
A 3.75in diameter version of common cast iron barbell plates. The top surface of the coaster is parallel to the bottom, allowing the top surface to support a glass nicely. The text is separated in the 3MF file so it can be printed in…
BSPP G1/4 barbed hose fitting for hoses between 5 and 7mm of Internal diameter. It has a small recess to fit an O-ring with 17mm of external diameter and a maximum of 2 mm thick. The barbs larger and smaller diameters are, respectively…
The model consists of two parts: the funnel for inserting the marbles and the base model. Additional extensions and add-ons will be released later. Printing Instructions: Supports required (disable “supports only on build plate”) Infill:…
I referenced many related designs, such as: https://barberjungle.com/product/barber-fading-comb-2/ I tried to increase the strength of the entire comb from another design angle. This design does not require set supports, increases the…
Peigne de précision pour dégradés. Design ergonomique, impression sans support. Idéal pour barbiers. Robuste et pratique
A barbell clamp for a 2" Olympic bar with a locking mechanism to prevent it from opening. I've also added ridges inside.
Minershouse from the early 20th century from Alsdorf (Germany). The house was build for two families. It was constructed for H0-scale (1:87). Bergarbeiterhaus aus dem frühen 20. Jahrhundert aus Alsdorf (Rheinland). Das Haus wurde geplant…
1-1/2 Inch Female NPT Pipe Thread to 1-1/2 Inch Male Barbed End 1 : 1.5 Inch FEMALE NPT Pipe Thread One model has a 6 sided hexagon for crescent / pipe wrenching End 2 : 1.5 Inch MALE Barbed (3 Inch) Additional model - TPU Washer – TPU…
I printed mine with PETG 30% infill & 5 perimeters. Simulation tested in Solidworks to remove non load bearing material. Avoid using PLA - its mechanical properties don't lend itself well for holding this much weight for an extended…
This version can be printed as is with no supports. I simply clipped off the bottom 2mm of the original file and uploaded it as a remix. This fits the CAP 1" chromed bars great. As a suggestion, it works fine on the CAP painted bars, but…
This fine piece of modern art is a “Little boy” nuclear bomb with “Barbenheimer” written on the side with barbie font, nothing more, nothing less
Tool to clean kettle rounded barbecue, scraper with a rounded shape.
The spiral is an add-on for my marble run. It can simply be attached on top. This is required and can be obtained via the link below: https://www.printables.com/model/1728016-marbel-run Printing instructions: Supports required (supports…
Quick release Barbell Collar/Clamp for a 2" bar. Current design requires 4x #6 1" construction screws. Print 1x: cylinder.stl, clamp.stl Print 2x: part-1.stl, part-2.stl, tpu.stl (I printed in TPU but you can print in PLA) The clamp is a…
Description: These are adapters for Submersible pumps. 2 have odd sizes which fit my cheap Amazon pumps Printables wouldn't allow me to have the “.” in .526 (meaning ½") in the file name. So if your curious what 526 means. thats why. I…
A super easy design, but looking great on the table: Barbed wire! Basically, this is just 5 steel rods glued together with some wire, but I'm really happy with the results. I used a super standard iron wire (like what you can get for…
This choker, bracelet, and armband set is inspired by barbed wire. It is meant to be printed with flexible filament. The choker and bracelet use a clasp and chain to wear and the armband needs ¼" elastic. I usually do your wrist…
A coaster modeled after a Rogue cast iron Standard Barbell 45lb Olympic weight plate. The original idea was to fill in with resin to create a flat top surface. I ran into issues slicing the original coaster, so I extended the lettering…
Note, This version is now obsolete. See my models page for the updated V2. https://www.printables.com/model/1219421-show-off-your-pr-with-dummy-13-olympic-barbell-set I will leave this here for people who want matching spares. I…
I used the Comb_cut file for printing, with the cut and holes drilled by prusaslicer. Everything went well, I used some glue in the holes but it wasn't necessary. It remains to give the comb a sanding. Drawn, used tolerances for my…
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 or support me on Printables Clubs! Patrons have…
Disclaimer - Always monitor your bird and the conditions of the items they may chew on. Wash the toy with warm soap and water to remove residues on the toy after printing. Simple Barbell type toy for Conures and Cockatiels. They roll and…
Olympic Barbell collar/clamp/clip with quick release handle and TPU grip pads (essential for good clamping force). Features Quick release handle. TPU printed Grip pads. Variants Fully 3D Printed - hinge joints are 3D printed. Single part…
Farbenständer für Vallejo 60ml Passend zu dem Design des "Paint Storage Vallejo" Farbenständers (vielen Dank dafür) habe ich einen Ständer für die großen 60ml Flaschen entworfen. (der Loch-Durchmesser ist ca. 37mm) Update 29.12.20 Ich…
Two versions, one barbed, one stubby beaded. I highly recommend you print this model with the barb pointed down. This accomplishes three things: You'll need supports regardless. They might as well be easy to remove. This orientation…
Use heat to insert the skewer and hold it in place.
Description : An essential 3D printable tool for home grooming or professional barbering. This "Arc Positioning Comb" is specifically engineered for clipper blending. The curved shape allows for better contact with the scalp, ensuring…
Olympic Barbell holder for vertical wall mounting. Maximum collar diameter of 80mm and shaft diameter of 30mm. Designed to use compression and not rely entirely on layer adhesion. It could be remixed to possibly eliminate the upper…
You need 6 Screws M3x8 , Servo-Tester-Board, Brushless Outrunner 2838 (Front Mounted!), Small ESC, Mini Power-Switch 9 x 13 mm. Maybe you have to adapt the hole in the Fan for the Motorshaft.
Fits any 30 mm rod. I tested it with a 5 kg weight plate in a vertical position, and it held perfectly, but for safety reasons, I use a screw fastener when using it in this position. Part Size Qty Source M3 bolt M3x30 SHCS 2 Link M3 bolt…
Barber trophy to customize with text of your choice layer 0.20 adding mounts on (barbiere trofeo)
Public domain models of barbell piercing jewelry by ds89 . Originally uploaded to Blend Swap .
Eine kleine Aufnahme für Hohlraumdosen (Ø68mm, 35mm tief) um in der Waschküche eine Steckdose hinter dem Schrank nach oben auf die Arbeitsplatte umzulegen
A barber pole :) Print two white and one each of blue and red parts. One STL, three colors. They form a cylinder. Then print the gray parts and glue the caps to the multi-colored pole. Other stuff will snap in place. Have fun ;) *edit:…
Easy print for using your olympic weight lifting plates on smaller diameter bars. Outside diameter: 50mm Inside diameter: 29 mm for 28 mm bars or Inside diameter: 31 mm for 30 mm bars Plate thickness: from 19 to 29 mm M40x3 thread with…
Barber pole can be printed at once or separately I used acrylic paint to paint the stripes
I designed these mounts to efficiently store my barbells. You can either only use the upper mount or both. I would advise to print them with PETG 4 Walls and at least 40% infill. For added stability you can orient your print with the…
XY Size Compensation on the Inner Piece at -0.4mm
Barbell Collar or Clamp for 50mm Olympic Barbell This is my take on a one piece print for a barbell collar/clamp. I have yet to print it, so it may need some tweaking. Should probably be made with PETG or ASA. If you are handy and have a…
A set of two 3D models for printing fake barbed wire. The coil measures ~168cm in total length, and prints 19cm wide so should fit on most machines. An 84cm straight section is also included for belt printers. Both models are repeatable,…
This French Crop Texturizing Comb is designed for barbers and hair stylists who want to create natural texture and volume when styling hair. The unique comb design helps lift and separate hair easily, making it ideal for French crop…
Bring classic barbershop flair to your keychain or business with this NFC-enabled barber pole design, available in two sizes: Large: 98×32 mm – fits a 25 mm circular NFC tag Small: 55×17 mm – fits a 10×20 mm rectangular NFC chip Both…
A quick-release bar clamp for a 2-inch barbell. There is a TPU center section (the one with the lip) and a non-TPU one to allow for replaceable rubber pieces, or make it possible to work with out having TPU filament (the flush one).
Small model for small pots. Requires no support and can be printed in one piece. Kleines Modell für kleine Töpfe. Benötigt keinen support und kann in einem Stück gedruckt werden.
modular shelf for 5mm thick wooden boards can be assembled in different sizes boards can be inserted every 60 mm wooden boards can be put in with a hammer, I didn`t need any clue, holds tight with connectors the legs can be connected…
All functionality is identical to the remix by Dylan C . Modified design with vertical countersunk holes for wall stud mounting with wood screws. STEP files included for future remixes if needed. Print Info PETG 0.3mm Layer Height 4…
Print this model from TPU. I used generic 93a TPU and it turned out great. I use these for a 28.5mm diameter barbell. The outer diameter of the grip is 45mm. I've included an angled grip and a straight grip. Edit: After further testing,…
Bigger opening for wider bars + bumper that can take some weight + floorstand for big bars/ low sealing.. + wall mount for small bar 25mm bar.
a super simple yet satisfying multi part barber pole that easily fits together and is fun to fidget with. the square caps were designed so that they can be printed without supports but the bulb cap will require supports. if you chose to…
Its design allows for precise adjustment without the need for tools, making it easy to change weights during your workout at home or at the gym. Simply slide the clamp onto the bar, push it until it is tight against the disc and secure it…
Note: this is an accessory for the Dummy 13 figure created by soozafone, which you can get here: https://www.printables.com/model/981111-dummy-13-version-10 I designed an Olympic barbell for Dummy 13 figures, complete with functioning…
NEW VERSION AVAILABLE https://www.printables.com/model/215501-simple-barbell-collar-v2-50mm-and-28mm This is the simplest barbell collar you'll find on the internet. I hate complex designs so I made my own collars to prevent using…
Englisch: I designed a grill for the Barbie here. The doors cannot be opened. If everything is printed together, the grill must be printed horizontally without support. There are also sausages ;) Deutsch: Habe hier einen Grill für die…
This is a 25-50mm adapter sleeve for converting standard threaded barbells or dumbbells to olympic 50mm size. total length is 190mm, thread depth is 165mm. I also made a separate 115mm spacer to cover the remaining thread on my standard…
Barbecue Fan Hand-cranked Air Blower Portable BBQ Grill Fire Bellows Tools repair kit.
Verbesserung der Kurbelwelle und des Standfußes, sodass die Teile beweglich bleiben und weiterhin einsehbar sind. Die übrigen Komponenten stammen vom Originalersteller und bleiben unverändert.
Printed in PETG on the Bambu Lab P1P at 0.8mm layer height. Added barb, slightly shorter length, tighter fit and added a few rounds. Works the same as the original, just more of a tighter, snap-fit. Post geometry based on a PTFE connector…
a tool to blow more oxygen into a fire to make it burn way better. for all gears use 100% infill for everything else 20% i used pla+ i will upload more photos when i finished printing
a well generated statue it prints at 75 deg as well in FDM ( HEAD will form) Have Fun if you remix mark as REMIXED
My Friend is a barber and needed something to use when she's putting in hair extensions so she can comb them out or blow dry them so I made this handy wall tool for her so she can always have two hands to work more productive. I also left…
Upgrade your barber station with this sleek and practical custom-designed tool rack , ideal for professional barbers, hairdressers, and stylists. Whether you’re working in a barbershop or managing your home setup, this tool organizer…
I redesigned this comb upon request because it is no longer on the market. 100% printed in PETG so that the teeth do not break and have excellent flexibility.
I needed barbed wire for my halloween costume accessory. I found the original barbed wire, but it was layed down straigh
Miners house from Alsdorf (Germany). Build in the early 20th century. The model was designed für H0-scale (1:87).
✨ Description: The Gold Crown of Barbed Wire is a symbolic and artistic representation inspired by historical and cultural references. This unique design features interwoven barbed wire patterns arranged in a circular crown shape,…
not every tolerance is yet perfect but no glue is required so grab an bit of sandpaper. Sorry
Four color version of Barbershop keychain. I liked the original but wanted a little more color. Printed in layers with a single extruder. Filament color changes (layers assuming 0.2 mm resolution): Start with blue at 0.00 layer 6 = 1.2 mm…
This is untested right now, I'll update when I've tried it out. I remixed this to be used as a vacuum restrictor for use on my car. I made several different sizes to test them out. I'm using this in the vacuum line between my supercharger…
Lid for @Three_Body_Problem 's wonderful Barbenheimer popcorn bucket. Now includes 100% more pink, 100% more bomb, and 100% more popcorn. [Print Instructions] Note that the base STL will result in a solid piece with no bucket, so you only…
The keychain - contains a text that can be changed directly in PrusaSlicer (see picture). - is designed for two different colors (optional) - is included in 3 different designs Der Schlüsselanhänger - enthält einen Text der direkt in…
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
A barbell, modeled after the Texas "Original" Power Bar, with weight plates, modeled after CAP cast iron plates. All models are 10% of their original size.
Some simple collars for specialty barbells that are smaller than a regular bar ( axle bar, farmers carries, safety squat bars , log ) or anything else made with sch pipe (1.900" diameter). Not the worlds strongest collars, but more than…
![Olympic Barbell Vertical Wall Mount + Bumper [Wooden Stud]](https://media.printables.com/media/prints/632854/images/5010209_18e4453f-e386-4fd4-a4bd-ff17fd955cdf_4d580197-89b6-4d36-8555-ef2721b08777/barbell-holder-stud-remix.png)
![Barbed Wire [TPU ONLY]](https://media.printables.com/media/prints/1051002/images/7962412_02939390-b7cb-4470-aa7f-ee5f73a81c63_8a8bb4b0-14b1-4ec2-acac-b9de4e4ab0cf/large_display_img_20241006_160342842.jpg)
