Counting matching models…
This is a work in progress project from my side, so there might still be some small bugs. I made a custom version of the new archetype blackbird toolhead for my needs. I have created a new core for my needs, to get use of a bambulab…
Updated to v2 for various duct compatibility and issues I encountered over the past few months. 1. Creep problem After using it for several months, the problem with v1 was that the layer direction was not good for pressure distribution…
This is a work in progress project from my side, so there might still be some small bugs. I created a custom version of the new archetype blackbird toolhead for my needs. I created a new core, to get use of a nf-crazy volcano hotend in…
Carriage with belt clamps for Archetype for Monolith gantry. I moved away from Archetype to Gustav Railway in the past because the belts on Archetype kept giving me problem (even with other mods). I wanted to go back to Archetype because…
Archetype breakneck mod for the lancer hotend, snakebite extruder flat mounted, carto/beacon and 15mm cpap hose. Including a revision of the snakebite with smooth bearing idler and bmg idler. Revamped hotend fan shroud to easily mount…
One piece EBB36 mount for the Armchair Engineering Archetype Breakneck w/ Orbiter 2 and PG7 cable gland. Tested on a VORON Trident and does not impede range of motion of the toolhead. You'll need to space the EBB36. I used short lengths…
This is my take on the Archetype Breakneck. It is running a Sherpa Micro with a Rapido 2 UHF. I have an EBB 36 I wanted to use and enclose with this. I also wanted to re-use my Rainbow Barf LED's from my Stealthburner. I've made a couple…
Because of the angle at which Orbiter 2 is mounted with Archetype Breakneck, EBB36 board can not be mounted to the back of the stepper motor in the usual way. This mount creates clearance to mount the board on the back or the stepper…
Latest revision but still untested
Hi Gerard, as requested another awesome model from the Fortnite Franchise, Do check the sizing suits your needs and post some pics if you do take the model on, Cheers Jace
5015 Fan option for those who like the breakneck design, but don't want to add CPAP
This is a nozzle cleaner for Voron Trident + Archetype (Small) users. I tested it on Blackbird and Breakneck for about a month and found no problems so I am uploading it. The mount design was referenced from purgebucket and the bucket…
Dual 5015 Fan option for those who like the breakneck design, but don't want to add CPAP
The original mount using the m3 square nut can now be used as a heat set insert. I've been using it for a month and haven't had any problems! The original model requires 35mm bolts. However, the heatset insert requires a bolt of about…
Updates: 12-NOV-2025: added m3 and m3 heatset versions of the front face, to help our poor IS graphs with a third mounting point for the fan cages. Standard voron-style short heatsets, 4.22mm holes for 4.5mm inserts. For the final public…
This is not a small size mjolnir, that is impossible due to interference of the xy joint. This is an archetype core for using a small size hotend on a medium size mjolnir. Basically, it can be used with any hotend that uses a combination…
NOT TESTED YET Probe mount needs to be moved and 7040 Fan Mount is WIP Edit 12/23/23 Made backplate beacon compatible and added STEP file. Right angle beacon will be the best fit I think. Added zip tie holes as well Should work for other…
I really liked the Archetype, but didnt want to get rid of my CNC Carriage, so I hacked together a version to use Mjolnir alongside the VZ-HextrudORT and Goliath hotend together with it. It does work well on my V2.4, but I highly…
May 2025 - Version 2: Addressing an issue where after about 200+ cuts the microbowden tube starts becoming deformed due to the lateral pressure of the cutting blade. Result was in incomplete cuts and jams in the tradrack on subsequent…
Mount your BTT EDDY Probe on your Blackbird toolhead with zero changes to anything other than the fan cover! Make sure you have a UHF version. The short versions of the toolhead for HF models WILL NOT FIT! It must be something like the…
This mod allows you to install the archetype on the cnc carriage siboor
Ender 3 V2 mounting plate adapter for Archetype (Experimental Branch) . Mounting block & holes sized to fit MGN9 rail mounts. + BLTouch mount for Blackbird Fan ducts (Short, add spacers for other duct lengths). (See this post for Mjolnir…
Archetype (short) Hotend mount for TZ V6 2.0 and 3.0 Designed for use with the Archetype Experimental branch.
This remix was made to clear the bed of a Trident 300, so archetype Mjolnir https://github.com/Armchair-Heavy-Industries/Archetype can dock with a Klicky-00 from dwtas at https://github.com/DW-Tas/Klicky-00/tree/main ( quite the long…
NEW 10/AUG/2025: Reinforced version that takes an m3x16 flathead and two heatset inserts, for strength.
Breackneck medium part and removable hose attachment are merged into 1 part
Edit: I have reworked this design for Archetype Experimental Branch . Do note that the updated belt clamp design is for MGN9 rails rather than MGN12. X stop should work with either Belt mount to use Armchair Engineering's Archetype…
A modification that uses XH instead of PH connector for the Archetype Fan Splitter I mainly wanted to solve it with the parts I have rather than buying ph connectors using xh connectors The clasp on the connector must be cut off (Same as…
Archetype toolhead mounts for Mosquito & NF-Crazy Volq; plastic has been added to support the heat break and create a pocket that holds the hot end securely
changed CPAP tube interface and added HSI to mount Wago's for wires in lieu of a board
Archetype toolhead ( Experimental Branch ) for Ender belt path. Requires MGN9 rail on the X gantry, see this for a no rails version Updated version of this, for the Archetype Experimental branch . Belt mount & belt mount end: updated belt…
I needed a filament sensor for a blackbird with an orbitor. I added space here for a standard df2 type switch (without the arm). It mounts with 2x 2x10mm screws. It uses a 5mm ball for the sensor. The PFTE tube needs to be notched where…
Did you get the pun? I find it hilarious so this means it's probably not! 😅 I modeled this archetypal offroader to use in the instructions of my other toycars and I thought it looked too cute to not to be put online! Download THIS first…
I have a Voron Trident with a Siboor AWD upgrade. This means I had to give up some printspace. To minimize this, I slimmed down Mjolnir. To accommodate for this, I had to mod the X-Endstop.
Archetype Experimental Branch core mounting block that accepts a Dragonfly BMS. Hotend sits at Short duct height by default, add 8.5mm MZE to reach Medium or Large. Extra BOM: 2x M3 Heatset 2x M3 Bolt (These should have come with the…
Made an adapter to fit extruders originally designed to mount on the Archetype shroud onto a sherpa mini mounting point So can also be used on the ApolloShroud (among others) In this case specifically, as seen on the render, the beta…
Parts Intended for Archetype Experimental Branch bltouch_mount_medium: Uses the 2510 fan screws to also securely mount the fan cover, which the bltouch bolts to. Extra Bom: 2x Heatsets 2x M3x6 BHCS (mounting the bltouch) Probe Offset: X =…
The blocks can be mounted with stock screws, however on the X endstop I found that a 2 mm longer screw works better. I run the SIBOOR Trident 350 AWD with flipped Y rails and the following mods from the Armchair Heavy Industries…
Beacon cable stress relief for Archetype
Armchair Engineering - Mjölnir goliath hotend mount. 3010 fan edition. a 3010 fan is easier to source than a reliable 2510 fan PS. Im actually using a trianglelabs CHC XL hotend, but the dimensions of the CHC XL and goliath are the same,…
[Work in Progress] Estoy diseñando una adaptación de los toolhead Archetype Mjolnir para usar con el hotend Phaetus Dragon Standar/High flow, un ventilador 4010 y lo sonda Cartographer. Además, puede usarse la EBB SB2209/SB2240 CAN/USB.…
This model is a custom Archetype printhead mount adapted for Parallax gantry belt routing and designed to clamp the belts directly on an MGN9 carriage . The mount allows the use of the full Archetype toolhead ecosystem . Extra BOM 4× M3…
Remixed using the Armchair Heavy carriage and the belt adapter made by Spagetee. The Spagetee mount doesn't fit with the current version parts so I adapted things using the current carriage.
See the updated version with PUG mount here: Printing Print model as is, Voron standard settings. The tool board contains a modifier mesh. For better tool board air flow please use the following settings with the modifier: No top layers…
Mount for EBB36 board designed for the Archetype Breakneck toolhead with Sherpa Micro extruder. This version places the EBB36 on the left side of the toolhead (opposite to the extruder motor) for cleaner wiring and better weight…
this is a remix of the orbiter mount designed to work with any model of the G2WW by Testsu97
Thanks @B A for the great base design. Extended the fork down to reach the screw on the rear extruder bar on the archetype toolhead system. I think this should be universal for everything except the angled breakneck mounts. Also includes…
just modification to the archetype mjolnir duct with bltouch and neopixels
Printable STL's of the Archetype style skill dice and talent dice from the Shiver TTRPG. Faces are inset 0.5mm Dice have not been printed, so please understand that there is not guarantee that the dice will be balanced or print correctly.…
Remember to scale: 100.4% for ASA, etc. I love the 24v 12k rpm honeybadger fans. Don't use fabreeko for anything else, otherwise I prefer west3d. But the berserker/vindr fans do not survive long term in my meagre 65-70 degree chamber.
◼ Archetype Breakneck faceplate for XOL LEDs remixed long-version Archetype Breakneck faceplate designed to reuse the thin 0.8 mm RGB Sequin LEDs from the XOL Toolhead, making the upgrade from XOL to Archetype easier without replacing the…
◼ Archetype Sherpa Micro Breakneck block (Experimental) is a remixed version of the VZ-HextrudORT extruder block, modified to fit the Sherpa Micro extruder. It also includes a BTT EBB36 mount and a modified rear extruder bar for heat-set…
◼ Archetype Breakneck X endstop mount mounts the X endstop directly to the rear side of the rail carriage on an Archetype Breakneck toolhead for the Voron Trident and Voron 2.4. Tested with the Siboor Trident AWD gantry, but should also…
◼ Archetype Wristwatch BMG flat extruder block (Experimental) is a lighter, flat version of the Wristwatch BMG extruder block with modified mounting points to better fit the Archetype toolhead. Designed for use with the Archetype…
This mount is similar to my other model but incorporates the PUG adapter and provides better CAN cable strain relief and constraint. Tool board mounting hardware also changed. BOM Part Qnty. Part Notes 1x2mm zip tie 4 Tool Board PUG…
endstops ez, why fiddle with sensorless crap. should be the same distance as a cnc sherpa + standoffs. uses with a m3x15 or a x20 if you add a 5mm thick toolhead board mount.
Armchair Engineering - Mjölnir goliath hotend mount. 3010 fan edition. a 3010 fan is easier to source than a reliable 2510 fan PS. Im actually using a trianglelabs CHC XL hotend, but the dimensions of the CHC XL and goliath are the same,…
Mount for EBB36 board designed for the Archetype Breakneck toolhead with Sherpa Micro extruder. This version places the EBB36 on the left side of the toolhead (opposite to the extruder motor) for cleaner wiring and better weight…
This is a nozzle cleaner for Voron Trident + Archetype (Small) users. I tested it on Blackbird and Breakneck for about a month and found no problems so I am uploading it. The mount design was referenced from purgebucket and the bucket…
changed CPAP tube interface and added HSI to mount Wago's for wires in lieu of a board
![EBB36 Mount for AE Archetype Breakneck w/ Orbiter 2 & PG7 [V2]](https://media.printables.com/media/prints/929120/images/7303815_5c012e7b-2886-4b1b-add0-dc648a5c838d_898d75b1-190f-4287-8021-9bacd08653dd/20240729_102606.jpg)
![Archetype Mjolnir Phaetus Dragon [WORK IN PROGRESS]](https://media.printables.com/media/prints/d30b0465-f400-4cb4-8214-80c417ac5e3b/images/10219867_9df5d99b-81f2-477f-baa6-14cdfc858b96_f1aef48c-f61d-4523-94b7-a037dfc5f76f/a910d3e2-89ba-42c8-b93d-1e22919def94.jpeg)
