Archetype Sherpa Micro Breakneck block (Experimental)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Sherpa Micro extruder block with BTT EBB36 mount for the Archetype toolhead (Experimental).
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 2
- Makes
- 0
- Views
- 41
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
◼ Archetype Sherpa Micro Breakneck block (Experimental)
is a remixed version of the VZ-HextrudORT extruder block, modified to fit the Sherpa Micro extruder. It also includes a BTT EBB36 mount and a modified rear extruder bar for heat-set inserts.
Designed for use with the Archetype Experimental branch.
◼ Required Hardware:
1x Sherpa Micro Extruder (tested with 3D Mellow)
1x BTT EBB36 (tested with BTT EBB36 1.2)
6x M3x4x5 Heat-Set Insert (Voron standard)
2x M3x4x4.2 Heat-Set Insert (NO, M3x4x5 WONT FIT! the rear extruder bar is too small :P)
1x M3x8 threaded standoff (may vary slightly depending on the thickness of the stepper mount and the stepper ground ring terminal; used to connect the BTT EBB36 mount to the stepper.)