Counting matching models…
Clamp your knife in place, fix the wet stone on the slider and just sharpen your blade. This fixture is ready to go with only 3D printed parts and therefore needs no extra hardware. You might add a couple of M3 bolts later (or similar)…
Articulated print in place model of a fish. designed to be printed on a filament printer with no supports. Do not add supports or it will spoil the joints. I have added a support to the rear 2 segments which will need cutting off at the…
Dimensions (LxWxH) 170 x 69 x 37mm (100% scale) Basic information Prints in place, no assembly is needed. The body is divided into 5 movable segments, which allow a wide range of motion, and grant the model with lifelike feel and…
About the tool A simple whetstone knife sharpening aid. Helps when getting started sharpening blades using a whetstone. 4 Different angles for different types of blades. 14°, 17°, 20°, 25°. Common Sharpening Angles: Pocket Knives- 20°…
Jigs for sharpening Drill Bits up to 10mm with a Dremel and a Cuttingdisk for a grinding Angle of 118° (standard) and 135° drillbits. Credits for the idea to voltNik:-) Update 20.4.2022: I replaced the model-files for those with threads…
Sizes: ø 60 mm x 60 mm (small pipe), ø 60 mm x 90 mm (tall pipe) Used print settings 0.20mm, no supports needed, Prusament PLA Simply Green The bigger version of the pot is in the making - stay tuned.
Description If the “pen is mightier than the sword”… why not have both for insurance? This simple mod to the classic Fine Point Sharpie adds a new aesthetic sure to please your medieval enthusiasts. This does not replace the existing…
ENGLISH Introducing FlexiScraper : the ultimate solution for effortlessly accessing low-profile prints and stubborn support residue. Engineered with precision, its sharp edge glides seamlessly beneath prints straight from the bed. With…
A simple clamshell case with a magnetic catch and provision to add a lanyard. For standard foam earplugs. Ideal for a motorcycle jacket pocket. Printed in PETG with a PIP hinge and recesses for 2 x [8mm dia / 2mm depth] neodymium magnets.…
Support de téléphone pour ceux qui aiment les chats Largeur : 70 mm A imprimer sans contour ni support de côté. Version with cable passethrough available here: https://www.printables.com/model/1761266-cat-smarphone-holder-v2-no-support ⚠…
I am going to preface this by saying that I am not putting together a full build guide, this is literally just all the parts I altered, this was literally a personal project that I decided to share because of the feedback I received. You…
UPDATE: I created a new, simpler chisel sharpening jig: https://www.printables.com/model/520488-better-chisel-sharpening-jig ORIGINAL POST: My chisel set was pretty dull when I bought them, and they needed sharpening after a couple of…
Better Cleaner overhangs! Teardrop shaped hole with horizontal ring edges. Stronger parts! Weak point at the top eliminated. Rounded edges on contact surfaces! Helps reduce friction between the tool and working surface reducing wear and…
Sometimes all you need is a 45/90 degree tool for tracing and cutting. It is a 2 piece tool that is a must-have in any Carpenter toolbox. You can use them combined and it is good to join wood planks at 90 degrees or to trace lines tracing…
Drill sharpeners in various sizes for DIY enthusiasts - BOSCH PWS 9-125 CE - FLEX orbital sander The drill sharpener uses high-speed rotation for grinding (FLEX orbital sander), it is set at an angle of 118 degrees in total for both…
This is a quick test I designed to test bed adhesion. There are some crazy tests out there that'll determine holding power and such, but I just wanted something that would replicate the sorts of issues you might run across in everyday…
This is a transition of my bed warping tests from Thingiverse. I was having warping issues and wanted to see how changing my bed temperature impacted printing so I made some basic models that have a similar shape to the models that were…
Remixed Whetstone block, to be used with knife to slide along the block maintaining the correct knife angle. 4 x different angled sliders to get suitable angle. Common Sharpening Angles: Pocket Knives- 20° Hunting Knives- 25° Fillet…
Had to print using 2mm raft to stick on build plate. Print with thicker side of the model upward shown in photo, no supports needed. May require some strands to be cleaned up when done printing. You can find adapters on Amazon but why not…
Knife sharpening helper / guide for 60 x 180 mm whetstones. Remix of "Whetstone sharpening helper" by Rejd (thingiverse.com/thing:2493459). Sliders, slider angles and base plate shape were modified. Max stone height: 30 mm Angle…
Minimalist, timeless bowl in a clear and sharp design. 🚀 Support My Work & Supercharge Your Business & 3D Projects! 🧡 Join my Patreon and unlock 400+ premium 3D models – with new designs every week ! 🔧 Includes STL + Fusion 360 files for…
Support me & Join Printables Club Assembly list of non-printed items for pencil case 2 pcs - metal axis 26( 25 )mm x 3mm 1 pcs - sharpener blade aprox. 6mm x 23mm with screw 2 pcs - M3 12 - 18mm screw If you looking for a bigger version
Stormtrooper Sharpshooter of the First Order. Updated model so its 1 shell and flat bottom. 2.27pm cmt 4/24/2023
I chose PETG since with camping and rubbish tip runs they'll only see a couple of weeks direct sunshine a year, so they should be plenty UV stable enough for that. Choose ASA if you're using them outside more permanently for a…
Useful tool for getting proper angles during knife sharpening on whetstones.
Prints PETG in 0.2mm layer height with no supports, a 5mm brim around adapter helps with bed adhesion. This is suitable for use with Sharpie fine point pens. Print upright with thin part of the adapter touching the build plate. No…
No support Magikarp. Colored 3mf included.
(Summary consolidated/updated 01/15/23) This is a mini belt sander design intended primarily for sharpening knives though it may also be OK for some light duty grinding/jewelry making/polishing, etc.). It uses commonly available 3/4" x…
Drill Bit Sharpener for Dremel with true Relief Angle. This jig is using a Dremel Cutting Disk for Sharpening. The 2 Parts are held together with a M3 Screw and Nut.
Want to access even more models not found here? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…
The main publishing location for this model is on GitHub. Go to the GitHub page of this model for the latest updates, Blender source file, and more detailed instructions. Go to my site for an overview of my other models . Only a few of…
Keeps the cable from becoming tangled and damaged. Made to fit into the original box. Printed with supports on the build plate only. Rafts: No Supports: Yes This is a remix of; https://www.thingiverse.com/thing:3248235
Quick and easy Visor Sharpie/Pen universal clip. Great for field workers who need to scribble quick notes occasionally, and can't get caught without a pen! Printed in Prusament PETG.
I really liked CNCKitchen's sharpener design, but I wanted some extra refinements, making the construction a bit simpler, using not so many different types of screws. So here's my remix. Changes from V2.1: redesigned handle for quick…
Had a hard time finding a simple model of a Warp Pipe that had good resolution. So I made my own. Print upside down and it should require no supports. I printed mine with 0% infill.
A simple test to check the bed adhesion and shrinkage of your filaments. I designed the model so that it should definitely lift from the bed. I wanted to test how much different materials shrink and how the enclosure affects them at…
This is a simple earplugs case for travelling or just for storage. It prints in place without the need for supports or other mechanical operations after printing. It might close and open a bit harder at the beginning, but after a few…
eBay user grant_gibson123 is illegally selling this model. This model is licensed for noncommercial use only. Update 15/09/2023: Removed the square keychain version - questionable integrity, don't want anyone losing their loops. Added…
A tool for sharpening the tip of a drill bit. The angle of the tip of the bit is 121° degrees. If your angle grinder has
Simple angle guides for knife and tool sharpening. These are not designed to clamp to the knife or hold the angle for you. They are designed to help if you are learning to freehand sharpen. Just rest the knife against the guide, lock the…
Specs: Dimensions of keychain are 61.5x11.12x30mm (X,Y,Z). Width of “eye” for split key ring is 5.25mm. Print: Not being by my 3D printer for some longer time now, so I decided to put this just as .STL without trying to print it…
Насадка на точило с абразивным кругом для заточки свёрл , угол при вершине 130°. Насадка подойдёт для сверла диаметром до 10 мм, угол 130° может быть использован на свёрлах по дереву и мягкому металлу. Насадка крепится к точилу болтом М6…
A remix of the Lightning connector based version from @stripetuning_193054 to accept the new USB-C connector.
I needed an angle guide for sharpening bigger drill bits on my bench grinder. With this I can move the bit on the grinder table from side to side and tilt it around the table edge. For now I have added only 118 degree tip angle files.…
The arm of the Work Sharp has a tendency to deflect or sag as you apply pressure when sharpening a knife. This simple but effective support block prevents that from happening.
This is a chisel sharpening jig. It accommodates chisels as small as 0.25 inch and as wide as 2.25 inch. There are 2 holding positions which I'll call the lower vise and the upper vise. Place the chisel into the vise so that its flat side…
I added text to it so you can remember the use. PLA, 0.15 mm layer height , 10%infill.
This is the fully revised Version 2.1! Watch how to make and use one: https://youtu.be/IM2il-zT2fA Bill of material: Suitable sharpening stones set(aff): https://s.click.aliexpress.com/e/_onjGrqw OR Individual sharpening stones (aff):…
🆕 UPDATED – MOULD_V2 (FLEX VERSION) [ENG] Cement Sinker Mold Simple mold for making cement fishing weights. Original version: PETG is recommended for printing. Mould_v2: Designed for flexible 3D printing materials (Flex). To increase the…
Sometimes sharpies write a little too sharp. This airbrush mod fixes that by makes sharpies able to draw nice noisy airbrushed lines. Simply attach a straw that you can get with a drink at any fast food place and blow through it. The…
I liked this model a lot, but the first print I noticed the scraper edge wasn't as clean and sharp as id like. I found it to be the bottom edge of the model was slightly beveled and as such, the first layer of the scraper was printing…
The Sharp Branches Vase is a captivating fusion of nature-inspired design and modern aesthetics. Its deep matte black finish showcases intricate, sharp branch-like patterns carved into its surface, creating a bold and sophisticated…
This guide is used to get the right chisel and plane projection lengths when using an eclipse style sharpening system. Its pretty similar to the original that it's remixed from except I added a lip to use it on the edge of the bench and I…
I Designed a stylish Tape roll and Sharpie marker holder. It fits perfectly inside a 77mm diameter tape roller and keeps your supplies neat and accessible. The holder has a special compartment to securely hold your Sharpie, making sure…
Support block for the Work Sharp Precision Adjust Knife Sharpener. I noticed that the V-Block Clamp would “sag” when sharpening a knife, thus producing an inconsistent sharpening angle. I designed this support block to eliminate that “sag”.
Sharpening jig using a whetstone. Baseplate has guiding rails, knife just gets inserted either in the 25° slot or laid on the 20° flat of the slider. Not even quite sure what to use the 25° for besides pocket knives that get heavily…
Update 11/22/25: Adjusted blade pocket size of 65 degrees version from 15 to 14 mm, avoid filament not getting cut properly. A long time ago I discovered pomi's filament cutter but wouldn't want to use it without a box a la wapameeto's .…
v1 is with 6 feet to reduce friction; v2 is with 2 layers of PETG without foot. To me they both feel equally slippery on flat desk surfaces. Thx for @MarcoDiNoto_1234805 for giving me the inspiration to print PETG alone side TPU. They do…
UPDATE 2024/29/05: Added holder for stone 51,2x19,6 mm. Name is KSJ-06-06. UPDATE 2024/31/03: Added revolving grinding stone holders. KSJ-06-04 is for attaching three stones at once and KSJ-06-05 is for attaching four stones. That means…
Customizable sharpening guids for whetstones / sharpening stones. There are various other versions of such guides available, but none of them made me 100% happy. This one is customizeable in size and keeps the rubber band safe in its…
Attachment for a sharpener with an abrasive wheel for sharpening drills, angle at the top 118°. The attachment is suitable for a drill with a diameter of up to 10 mm, an angle of 118° can be used for most types of drills. The attachment…
Fits a 66mm or less wide common sharpening block. Fixed at 17 degrees for easy operation. Very hard edge knives can take a 15 degree edge, cheaper common ones last longer at 20mm. 17 is a compromise angle used by many for a wider variety…
Update (Feb26): Left handed thread (original) now supplemented by a right hand threaded lid (new) - as suggested by several comments from makers. Feed back appreciated, ta. Whether you are left or right handed you can choose a top that…
This model allows you to use Victorinox Dual-Knife Sharpener as you would your Spiderco Sharpmaker. It maintain angle for your sharpening rod at exact 30 or 40 degrees both at narrow and wide sharpener side. Micro variant is even smaller…
Ive designed something to clamp over the existing guard on a bosch 115mm angle grinder then clamp your angle grinder to a bench to sharpen 12mm, 10mm, 8mm, 6mm, 5mm, 4mm drill bits 2x 90mm 8mm bolts & nuts required. mine are my usual CF…
A 3D Printed Grommet that works.
Pencil holder in the shape of a giant sharpener. No supports required.
Note: I haven't used this in several years and as you can see in the photo, they worked for my headphones. Seems like they might not work for yours. The Fusion 360 F3D file is in the files section if you want to fix it. Needed something…
We modelled this warp trotter from Honkai Star Rail in Zbrush and Blender. The file is already prepared for printing using a multi-material 3D printer. We have sorted out colors and support placement so just load up the 3MF file with the…
The tool is a remix of the fantastic original model, which is super easy to print and works great. It has been redesigned to fit Parkside (Lidl brand) AC Multi-Tool "Dremel" tool and adds additional features. For small drill bits push the…
Introducing a quick and easy way to keep parts from peeling off of the build plate - The Better Mouse Ear! This is a disk that improves surface contact with the bed in corners of your print that are prone to warping. Normal mouse ears are…
You need to unscrew the two Torx from the original Base and replace them with 25mm M4 (DIN 912 fits perfectly for my model). Bonus: if you delete the electronics from the base you can put the cables for the unit through the base and my…
An attachment to use with a shop vac with a 35mm nozzle (eg Kärcher, but possibly others), useful for wet cleaning carpet and upholstery. The attachment area is conical so it creates a snug fit. Print with 100% infill, this needs to be as…
A beer coaster with a carp logo on it. It looks best when you make it a 2-color print. Diameter is 72mm.
Easy to print, tought and compact construction. Unfortunately - it needs supports. But easy to remove. v2: fixed Category: Construction Toys
Also see my Diamond Stone version of this rolling sharpener. Most home knife sharpeners have you drag the blade across a sharp edge or small diameter grinding surface. While this works well initially, after repeated use, it'll start to…
Almost out of filament? Print these with the last few fractions of a meter, and in a just a few minutes you can sing the blues. You can also load up a new spool set up a new print, and Rock ON while the new prints proceed! These couple of…
Print Settings Printer: Prusa Mini+ Rafts: No Supports: No (little one) Resolution: .25 speed Infill: 10 Notes: Prints great, no supports.
A simple assistant to keep a constant angle while sharpening knifes with a whetstone. Technical Data: for Whetstone 180x60x30 for Whetstone 182x62x30 for Whetstone 200x50x25 Print Settings: no supports required printed with normal PLA…
Christmas Cookie Biscuit Gingerbread Cutter (approx 55 mm) You can change scale in the Fusion 360 File in Parameters Table, for make the cutters bigger (X and Y axis), without to increase the wall thickness. (See attached picture with…
The Articulated Garpede is a print in place supportless model . Inspiration from Hollow Knight! Check out the LONG version here ! Detailed Print Settings: Seam: Back Layer Height: 0.1-0.2mm Infill Density: 15% Infill Pattern: Default…
Combines the benefits of free-hand sharpening and a fixed-angle system. It takes less space than a full fixed-angle system, allows you to use any stone, and is quicker to use. Just put a knife on a magnet, set the angle with a screw, and…
Features: - suportless magnet holes - easy to get the pen or sharpie from tray - stackable design
For carp fishing mounts Mount stopper.
Use Case : Printed at 101% scale to avoid any threading issues with my Dremels. Printed all four versions of the sharpener and was able to thread onto my Dremels without any clean-up or post-processing. Accessories : Dremel Lite 7760 -…
Want to access even more models not found here? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…
Rolling Knife Sharpener with inbuilt planetary gearbox with Mechanical Advantage of 1:3 (HORL compatible) Important: This part is published under the Attribution-NonCommercial-ShareAlike 4.0 International (CC BY-NC-SA 4.0) licence!…
I wanted a dispenser for my insulin needles that could hold a lot of them. The 110mm tall one should hold an entire box of 100 comfortably but there are smaller versions included if you prefer. The inside has a small slope to help them…
TL;DR Tool to figure out the bridge quality of printer + filament combination, between 20 and 120 mm in steps of 10 mm, needs less than 2g of filament and less than 10 minutes, save a lot of money. Collection tools, 3d printing Motivation…
Cricut Pen holder for Sharpie. Extra fine has been tested, Fine is still under development. It should be adaptable for most pens. Check out the spreadsheet in the Freecad source. Print .2mm layer height, no supports. Flip it so that the…
I recommend scaling up to 1" on the sides (166%).
Here is my version of the communications earpiece worn by Lt. Uhura on Star Trek. I estimated the size so the dimensions may be off but I feel like it looks close to screen captures. The tip that goes into the ear was made for appearance…
My Original Project https://makerworld.com/it/models/655968#profileId-582989 This simple tool allows you to remove dust and dirt from USB ports and clean the inner part of the rubber, which often gets dirty. 1 gram and 8 minutes of printing
When designing a 3D object, it is good practice to first model the object you are designing around. The most recent Prusa Flash Contest is focused on Sharpie Mods , and I have seen many entries that only rely on a simple radius to…
The Loop Earbud Carry Case with Mute Storage is a compact accessory designed to keep your earbuds safe and organized. It features a unique lid that securely holds Mute rings while protecting your earbuds from damage and dust.
Takes up one hexagon on the Storage Wall, requiring one of the standard M3 inserts available in that project. Stores a standard 12mm diameter Sharpie pen, and just needs a small push to clip the pen in, giving a satisfying little click.…
An ideal accessory for your Halloween costume. This keychain will help you to hold your smartphone or as a card stand. Print instructions Category: Accessories Print Settings Printer: prusa i3 Rafts: No Supports: No Resolution: 0.2…
Boilie cutter v1.0 blade in bottom is printed, you can modify it so you can add real razer or metal blade. I printed in PETG, no supports, 0.2mm. Go fishing!
Harpy, loosely inspired by a sculpture found on a 19th century tenement house in Łódź, Poland . This is another fantasy creature based on architectural details found in Łódź. Suitable for 28mm tabletop games. Created so that it does not…
