Counting matching models…
This mask can be used with a piece of textile or cotton pads as filters. You can also use it as a respirator if you have respirator filters. It's better to print with PETG or ABS so you can wash it in a dishwasher. Please print at 100%…
Goes into Tomy Gacha gashapon vending machine
masha from masha and the bear cartoon. i included a meshmixer orientation it looks wrong in the pics and it loads in simplify3d wrong, so you have to rotate it -90 degrees in the x direction. and use supports and raft. Category: Sculptures
Lampshade for printing in vase/spiralmode opening is 41 mm width I would be happy if you like it. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.18 Filament: amazon basics PLA glow in the darc…
A chibi style figure of Inuyasha, an anime character. Two versions uploaded. The only difference is one has modeled eye features. Printing Tips Supports are required. Rotate around X-axis in backward for ~30 degree. Other orientations may…
** Update 2024-01-08 ** I've added a larger version of the model that can accommodate phones with a case. This has been tested with an iPhone 13 Pro + case and it works well. See file: dell-monitor-phone-mount-lrg.stl or…
This model is designed to be printed and then painted, not to be printed with a multi color printer. Best printed in a light color, Full size for display piece 75% for show sized, 40% for keychain size best printed with at least 1.6mm…
A small rimon (pomegranate) shaped bowl / dish / plate for Rosh Hashanah (Jewish New Year). Place your rimon seeds, honey, apples, dates or whatever you want in it. The bottom of the bowl is engraved with the holiday greeting “Shana Tova”…
Various word art names. Prints well at 0.2 on Mk3S+ and Mini+. Print face down on smooth PEI sheet for best results. Credit to Robert Halter.
3D print your own Gamecube Controller gashapon shells! This will allow you create custom keychains using OEM/compatible buttons and sticks. This design is based of off 3D scans and are very close to the shells produced by Nintendo. Edit…
개인의 손 크기에 따라 몇 가지 크기를 함께 올립니다. 파라메트릭 숫자를 조정할 수 있습니다. 본드로 결합하면 됩니다. Raise a few sizes together based on the size of the individual's hand. You can adjust the parametric numbers. You can combine them into a bond.
Unfortunately my printer was too small for the original model, so I modified it to print in multiple parts. I also added slots for the floor supports. The holders are 140mm long, so two of them have a total length of 280mm. Print:…
This is the Gasharpoon skin for John Doe that originates from Limbus Company turned into an action figure.
Chibi Inuyasha slashing sword Tessaiga. The model is supposed to stand by itself. Tips Support materials are required. Samples were printed in 30° backward rotation. Might have better orientation but I didn't test. Avoid supporting hard…
Printing Several printing options are available: the blade may be printed upright (parts with “vertical” in the filename) or horizontally split in half ("Blade * half" in the filename), and the hilt can be printed “pre-assembled” or as…
It's a cat litter scoop holder with washable and removeable part for scoops up to 110mm wide No support needed. There are 2 base. One has a hanger holes. NO support needed. 15% infill
I found the dimensions and designs of the traditional japanese chashakus at the toolsforwoodworking blog and decided to make a 3d printed version of them. Here are five different styled chashakus. 187mm long and 100 mm wide each. They…
- Matches OEM dimensions (3.15mm x 3mm x 1.6mm) - Print in PLA so that it is biodegradable - 100 up — 10 x 10 - 1600 granules = 7 hour print time
I wanted to have a two-color Rider Gashat like the ones from the show. So here's a four-part version that should be easy to print and glue together.
Rocky & Bullwinkle Show - Boris & Natasha - 1959 3D printable model.
Masha and Bear topper. Prepared in layers for multicolor.
Dasha – Gamer Girl Cyberpunk Figura de cuerpo completo de alta resolución lista para imprimir en 3D. Dasha es una chica gamer de estética cyberpunk con una actitud desafiante y un look inconfundible. Lleva un headset gaming con orejas de…
These propguards are specifically designed for the HGLRC Drashark 1.6-inch quadcopter to protect your propellers and motors from impacts and damage. They provide excellent stability and durability without significantly adding weight to…
The shell will print in two separate pieces, you will want to superglue them together and maybe sand them down. Print the SD card drawer upside down (with the opening facing the build plate). Print all pieces with a brim. Contact me for…
I have created a holder for wine glasses (68-109mm diameter) that can be mounted to the shaft of an umbrella (38mm diameter) Now there is also a version for 49mm diameter.
Das nächste Weinfest kann kommen. Mit diesem Weinglashalter hat man die Hände frei zum Wandern oder für andere Dinge. Am Halter wird eine Schlaufe befestigt und dann kann das Glas um den Hals getragen werden. Der Halter ist geeignet für…
One remake of the Messi phrase in the last FIFA's world cup
Please share your prints Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Swap Instructions: Start with Black red 11 orange 14 white 24
DON'T BE ASHAMED OF WHO YOU ARE, THAT'S YOUR PARENTS JOB, SIGN Category: Signs & Logos
Mat Cauthon is super cool, and I wanted to make his Ashandarei! Fits American broom handles and I will be using a wooden one and I'll wood burn the inscription. Included are the characters for the old tongue that I found somewhere on the…
Given that there aren't too many snuffbox trees growing in Canada, I had to improvise when trying kashaka s. You're probably better off buying the real thing. Pick the diameter to suit your hand size in Customizer. Smaller might be…
World of Warcraft Feral Druid cat form sleepin
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 or support me on Printables Clubs! Patrons have…
This is a gashapon for miniature or diorama. There is a model with and a model without gasha ball inside.
My webcam hang into the screen area of my Dell Ultrasharp monitors as they have only a small frame. So i decided to design these small “spacers” to get rid of the “notch” of my displays.
A simple low profile 1/4-20 magnetic mount for a Dell Ultrasharp Webcam (WB7022). More information available here Category: Office
Discover the very customizable 3D-printed maraca featuring a removable handle for easy filling with different materials. This innovative design offers musicians and enthusiasts the flexibility to experiment with various sounds, enhancing…
This adorable bunny vase is perfect for Easter and spring decor! Designed with a minimalist, modern aesthetic, this rabbit-shaped vase features a hole in his arms, making it look like it's holding a flower. Slight textured (fuzzy skin)…
NOTE: If you like our designs, please consider supporting our work by joining our Patreon channel—your support helps us keep creating and growing our community! This is a set of pieces that can be used to create a Start Trek TNG Tasha Yar…
Gedruckt aus PLA von Sunlu in 0,2mm. Keine Stützen notwendig !!!
Small stand to hold up gashats on a shelf
Reagenzglashalter für 400mL Bechergläser (niedrige Form). Für 4 16mm Reagenzgläser und 4 20mm Reagenzgläser.
I'm using this to mount my Logitech C270 camera on a Dell UltraSharp U2720Q monitor. Just clipping the camera to the top of the monitor would obstruct part of the screen, because the U2720 has such a small bezel. The mount has little pins…
This is my Gashadokuro . This model was made for a fellow Patron of MZ4250 ( Thingiverse , Printables ) who requested it on the discord server that is available for every Patreon tier. A remix of a model made by MZ4250 ( Thingiverse ,…
Gashapon capsule for 80mm toys.
After Apple announced Continuity Camera was comming to macOS, I made a quadlock mount for Dell ultrasharp monitor
Simple holders to make using DMT DiaSharp sharpening stones easier. The smaller one fits 0.8" x 4" (22mm x 101mm) sharpeners and the larger one fits 2" x 6" sharpeners (51mm x 153mm) sharpeners. This model includes space for a 1.5mm thick…
Very simple design for Kashakas. There's one half of a hollow sphere that has a lip that fits into the other half of the sphere. The lip portion on both halves has a small groove where you can put a 1mm CS/41mm ID o-ring for a kind of…
Halter für Erdnussbutterglashalter
Elevate your space with this modern tabletop decor featuring the word “MashaAllah” in stylish English lettering . Designed for minimalists and lovers of clean Islamic art, this piece adds a spiritual touch to your office desk, study…
I am back once again with a replacement part for my Umlo V111 rechargable stick vacuum! The original HEPA filters are no longer available for purchase, so I had to come up with a new solution. This replaces the original HEPA element with…
Sasha was a well-preserved calf of a Woolly Rhino found in Siberia.
takes 3 0.25 in rods(more for alignment than strength, I cant fit a larger one in it) lengths are 2 X 41 inches and 1 x 59 inches. should be split for a typical build plate size. Category: Props
Sekglashalter für z.B. Camper oder Wohnwagen
Figure size: 29,08 x 20,65 x 40 mm Use your own stand or a pre-made stand in .stl Supports are necessary Illustrative pictures & gifs Possible re-make for your own, non-commercial purposes My private AI model without textures is available…
This remix has a thinner front and something like smoother edges. I used it as a proof of concept to hang my speakers next to the monitors for getting more space on the desk (below). So please excuse the picture quality. It was done "on…
Designed um in die hintere Mittelarmlehne zu passen. --- Designed to fit in the back arm rest ->not tested yet
Simple GoPro-style hinge mount for Dell UltraSharp Webcam that should work with gooseneck/flexible mounts with a GoPro hinge, as well as the wider system of GoPro hinge mounts. Keyed to work in only one direction, to give maximum…
Drucken mit PLA oder PETG mit Stützen.
Glashalter für Stielgläser. Vorne leicht angeschrägt damit sie auch nicht von alleine rausfallen können Print Settings Printer: Anycubic I3 Rafts: No Supports: No Resolution: 200 Infill: 15 Filament: noname PLA Category: Organization
Lieutenant Tasha Yar brings courage, loyalty, and frontline determination to your collection. Inspired by the iconic Starfleet security chief, this stylized monitor buddy captures Yar’s fearless spirit and commanding presence in a compact…
It would be really useful and eco responsible to be able to print a sponge allowing to clean, and to put it in the dishwasher to reuse it ...
Russian animation Сказочный патруль - Fantasy patrol This pint - 0.2, but best print - 0.1 Fire - https://www.thingiverse.com/thing:3470234 Ice - https://www.thingiverse.com/thing:3470226 Air - https://www.thingiverse.com/thing:3923623…
The webcam originally came with a magnetic cover, but using it was quite cumbersome, since once it is taken off, there is no way to store it, and I quickly lost it. For a solution I designed an attached flip-cover, that also locks in…
A holder I made to be able to attach the Diasharp Diamond stones to a board while still being able to take them out. Some of the stones have pretty big tolerances so while one fits perfectly the next might be a snug fit, so maybe print…
Do you like this design and want to give a Tip for it? Do it here This Box is meant as a Transportbox for N95 / FFP2 or FFP3 Respirators. It was optimized for Valveless Moldex 2400 NR D Masks, since those seem to be the best affordable…
Just print in PETG for flexibility and temperature resistance inside car/camper.
Tired of paying for paper GCPs that blow away, or printing them on cardstock that fades by lunch? This is a free, reusable ground control point target for drone mapping and photogrammetry. The high-contrast checker auto-detects cleanly in…
Bit for converting or scratch building a Lifta Droppa or Smasha Gun, printed whole or in two halves and glued togheter, no idea of the scale as compared to the Mek Gun so you will need to check the size you want and scale it to fit. Add a…
NATASHA - ROCKY & BULLWINKLE - WALL ART
lithophane about the cartoon Masha e o Urso. Use your settings for this type of work. follow our social networks: https://linktr.ee/pmartins3dprint
A few LEGO compatible bricks that allow you to create cool sculptures with 3DSlash. If you know someone who loves Lego and Minecraft, this is a collection of things she/he may like. The things are composed of a half-height LEGO brick at…
This vacuum tweezer is designed for dismantling BGA chips during soldering on the Infrared Soldering Station, in other you can find other uses for it In order to assemble such a device, first of all you will need a pump VN-C4 Which can be…
Really liked the magnetic privacy cover that came with the webcam, but didn't like how it didn't allow you to use Windows Hello facial recognition with it on. Designed this cover so that it will only block the camera and leave the other…
I downloaded the nice fan duct by user Pasha Linker (from FB group "Flyingbear Tornado Owners" ), but using a 40x40x20 fan the head bumps in the frame so I modded the duct for a lower profile to accomodate the bigger fan. Lots of…
Simple model, simple usage. Print the model, put it into the ring light, put webcam inside.
May need to adjust model youself to get chip unde the jewel
mensula para estante sobre Inuyasha
Well, I am not really sure if this worth sharing. But I'll do it anyway 🙃 This is a cap for a Pentax A110 24mm lens with the UV filter attached. It's just a snug fix - without any fancy mechanics. It took me two prints to get the…
First (sensible) try at a half shell for these shakers. You'll need to print a minimum of four to make a single set; eight shells makes a two-hand set. These are sized for quite small hands and for narrow (~ 5 mm braided black dacron)…
Halterung um die Gewächshausfenster vor dem unkontrollierten (durch Wind) Aufklappen zu schützen.
Happy Year Rosh Hashana Honey Bowl. Category: Art
This is an alternative to the plastic sharpening stone holder sold by Sharpening Supplies for use with the all metal, diamond encrusted, Diasharp sharpening stones as well as the Sharpening Supplies one sided strop. The base was printed…
I designed this headphone hanger to fit my dell 24 inch Ultrasharp screen, but it will probably fit other sizes as well. Let me know if and what size screen you tried! I included the design for both sides, so decide accordingly what file…
Für ein Glas mit 5mm stärke und 5mm im Kasten
Halter für Katzengrasbehälter. Behälter hier auf printables auffindbar. Der Eckige: Cat Grass Pot von Harry | Kostenloses STL-Modell herunterladen | Printables.com Der Runde: Katzengras-Pflanzgefäß von Malmer | Kostenloses STL-Modell…
Glashalter für Ikea Deckenleuchte
Keep your harmonicas safe, dust-free, and ready to play with this 3D Printed Gridfinity Bin , meticulously designed to store a Casha Blues Harmonica and a Hohner Marine Band Harmonica —each with its protective case. This modular storage…
A Gridfinity box that fits 4 Diasharp Diamond Stones. Includes the source autodesk fusion file for remixing.
Will help save money in the long run. Filament Type: ASA https://amzn.to/45V2hFw Layer Height: 0.2MM Walls: 2 Infill: N/A Supports: false LV-H128-RF Filters: https://amzn.to/3IbhhoQ If you want to thank me subscribe here and to my YouTube…
Wie viele Körner sind in diesem Hirsebeutel? Falls die Frage verfängt, kann damit gut ein "immer-wieder-10-nehmen" Zählhappening veranstaltet werden, das hoffentlich bei manch einem die rekursive Struktur unserer Zahlendarstellung…
The are 3 models 3x4 5x5 6x6. Choose your favorite! The holes have a diameter of 9.25mm The holes are below, rotate the model if you prefer
Versieren van de tafel met Pasen. Decorando la mesa para Pascua. Décorer la table pour Pâques. Decorating the table for Easter. groetjes ludo
Atik Pasha Palace is an architectural 3d model stl of a real historic palace building, made for anyone searching for Atik Pasha Palace stl, historic ottoman architecture model, or building facade 3d printing. Use it for tabletop display,…
