1 / 9
Moldex Respirator Box (Dishwashable, Water-, Dustproof & Strong) — image 1
1 / 9

Moldex Respirator Box (Dishwashable, Water-, Dustproof & Strong)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Do you like this design and want to give a Tip for it? Do it here This Box is meant as a Transportbox for N95 / FFP2…

Rating
0 / 5
Likes
4
Downloads
23
Makes
0
Views
221
Reviews
0

Updated at source:

Model information

Category
Other Ideas
License
Creative Commons — Attribution — Noncommercial — Share Alike

Do you like this design and want to give a Tip for it? Do it here

This Box is meant as a Transportbox for N95 / FFP2 or FFP3 Respirators. It was optimized for Valveless Moldex 2400 NR D Masks, since those seem to be the best affordable ones around europe yet.

2 Valveless Masks can be stacked without pressure.

It is meant to make a transport in your Backpack or out of the Backipack possible. If a very Smooth TPU-Material is used for the Seal (Like Firberlogy 30D), it was waterproof in my case.

Both the parts can be printed in 3,5 Hours each, if correct slice-settings are used, even though they are quite massive. Please refer the description for that.

This Box was clearly inspired by the Frog Box v2.0, but completly designed from scratch. Only the hinges and latches are taken 1:1

Print Settings

Printer:

Two Trees Saphire Plus (feat. E3D Hemera)

Rafts:

Doesn't Matter

Supports:

No

Infill:

25% Gyroid

Filament: Fiberlogy Easy-PETG Burgundy


Notes:

Its a Very fast and nice Print, if following Settings are used:

-Layer Height: 0.2mm

-Linewidth: 0.8mm

-Outer Wall Line Width: 0.75mm

-Inner Wall Line Width: 0.75mm

-Infill Line Width: 0.45mm

-Wall Line Count: 4

-Top Surface Skin Layers: 1

-Top/Bottom Thickness: 0.8mm = 4 Layers

-Infill: 25% Gyroid

Category: Other

Tags