2,940 models
I wasn't satisfied with any of the models I found for clean/dirty dishwasher indicators, so I decided to practice some modeling and make my own. My wife hates the feel and sound of 3d print material sliding together, so I used a…
Print approx. €1.64–€2.01 excl. taxPreliminary estimate for PETGSource material: PET
A funnel that fits the windshield washer fluid reservoir for a 2016 Volkswagen Golf (and other VW/Audi models). Print settings Material: PETG Layer height: 0.20 mm No supports needed. Seam position: Random Perimeters: 8 (avoids top and…
Print approx. €3.43–€4.20 excl. taxPreliminary estimate for PETGSource material: PET
I have made updated model with lid and viewing ports, check it out: New version I present to you fully parametric boxy things dispenser - originally meant for dishwasher tablets. You can use it of course for anything with boxy shape.…
Print approx. €3.21–€3.92 excl. taxPreliminary estimate for one variant
Parts for IKEA Behjälplig
Print approx. €0.35–€0.43 excl. taxPreliminary estimate for PETGSource material: PET
The thing that holds the plate rack together kept breaking. Here is a new stronger one for the Fisher and Paykel dishwasher. I did with 60% infill. Few months later and the ABS is still fine.
Print approx. €1.14–€1.39 excl. taxPreliminary estimate for one variant
These knobs can replace both the large and small knobs on a Maytag or Whirlpool washer and dryer. Backstory: My large timer knob cracked on my Maytag dryer after only two years of use. On removing the broken part, I find that the knob was…
Print approx. €0.84–€1.03 excl. taxPreliminary estimate for one variant
Introducing the 3D-printable Berry and Fruit Washer with Drainer , a two-part kitchen essential designed to simplify your fruit washing routine . The innovative design includes a base where water collects and an upper compartment with…
Print approx. €4.53–€5.54 excl. taxPreliminary estimate for one variant
Replacement washer for the cords for the parcel shelf/trunk cover of a Dacia Duster 2018+. The factory rubber bar thing is not very well made and easily falls out, it is basically a rubber cross bar that you slide over a knot in the end…
Print approx. €0.05–€0.06 excl. taxPreliminary estimate for PETGSource material: PET
I used ASA filament for printing this clip. Maybe PETG works also fine. PLA is not suitable for this use case.
Print approx. €0.35–€0.43 excl. taxPreliminary estimate for one variant
If you like my work consider Buy me a coffee 😊
Print approx. €0.20–€0.24 excl. taxPreliminary estimate for one variant
This is a replacement backing to the “HANDLE LID FOR DECOR PLATE” part on an Asko D5624 dishwasher. It appears to be used on other D5xxx models as well. The original part number is 8084025 and is a single piece of ABS plastic. You can…
Print approx. €1.93–€2.36 excl. taxPreliminary estimate for one variant
Object: Pressure washer Model/Type: BLACK&DECKER/PW1700SPM Part: Adapter click connect - connector between hose and pistol. Pressure hose information: YL max 160bar/16MPa/2320Psi max 60C/140F 2014.11 Pressure pistol: Annovi Reverberi I…
Print approx. €0.47–€0.57 excl. taxPreliminary estimate for PETGSource material: PET
Dishwasher Dirty/Clean magnetic sign to indicate the status of the dishwasher. it is printed in 2 colors on Prusa MK3s with one extruder. The print has 3 magnets that are embedded in the print. At about 3.2mm height there is PAUSE in the…
Print approx. €0.80–€0.98 excl. taxPreliminary estimate for PETGSource material: PET
These are direct replacements for the Whirlpool WDT710PAYB6 Utensil Rack (part# WPW10671904). Save yourself $20. Printing Settings: Print these in a stronger filament like PETG, ABS, etc. Supports needed
Print approx. €1.76–€2.16 excl. taxPreliminary estimate for PETGSource material: PET
Dishwasher Sign REMIX with layer height color change. more magnet types, thinner mag plate for stronger connection, and
Print approx. €1.23–€1.51 excl. taxPreliminary estimate for one variant
Krytka matice M6 včetně velké podložky. Použito v bytovém jádře v koupelně, šrouby drží světlo v chodbě. Doporučení k tisku: Vynucené podpěry na místě podložky, výplň 15%, materiál PLA.
Print approx. €0.20–€0.24 excl. taxPreliminary estimate for one variant
Replacement of the plastic insert into rail holding the basket. That prevents the basket-holding rail from leaving the guiding wheels. It gets easily broken over time and is almost impossible to get hold of replacement. Recommend printing…
Print approx. €0.23–€0.28 excl. taxPreliminary estimate for PETGSource material: PET
Dishwasher cleaners have to be put upside down in the dishwasher so the cleaning agent can pour out when the membrane inside the cap gets wet. If your dishwasher has a tray instead of a cutlery basket this is quite annoying. I used to…
Print approx. €4.25–€5.19 excl. taxPreliminary estimate for one variant
This is a thin plastic washer that fits between the gripshift and handlebar grip on kids bikes. Dimensions taken from the original part (30 mm OD x 23 mm ID x 0.6 mm). Easily modified to other sizes in Slicer. Recommended to print in PETG…
Print approx. €0.05–€0.06 excl. taxPreliminary estimate for PETGSource material: PET
Replacement roll of the basket.
Print approx. €0.21–€0.26 excl. taxPreliminary estimate for PETGSource material: PET
Ford Fiesta '03, perhaps it fits in many more Ford types Problem: The Closer of the washer fluid reservoir was broken. In my first printing project I constructed this closer in my way. It fits with a suck. I have fixed the new closer with…
Print approx. €0.37–€0.45 excl. taxPreliminary estimate for PETGSource material: PET
This is a simple sign. I designed this in Fusion360 to accept a magnet that I have a bunch of which I’ve bought on Amazon. They are around 16mm in diameter and are a strong magnet that works well to hold the sign on a sheet metal front…
Print approx. €0.59–€0.72 excl. taxPreliminary estimate for one variant
The skid plate on my Bauknecht GSXK 5020 SD dishwasher broke, so I designed a compatible replacement. Apparently these skid plates fit also refrigerators, freezers and other appliances from many companies. Print in STL orientation at 0.2…
Print approx. €0.30–€0.37 excl. taxPreliminary estimate for PETGSource material: PET
Bodywork supplement washer shim for Carson CV-10. Printed in PLA at 0.2 Arandela suplemento carrocería VW Golf Rc Carson CV-10. Imprimido en PLA a 0.2.
Print approx. €0.08–€0.10 excl. taxPreliminary estimate for one variant
For optimal storage of the foam injector on the high-pressure cleaner, this mount was developed. The foam injector is inserted horizontally into the mount and locked in a vertical position by rotating it 90°. This ensures that the foam…
Print approx. €4.68–€5.72 excl. taxPreliminary estimate for one variant
coin de remplacement pour lave vaisselle professionnel - replacement corner for professional dishwasher
Print approx. €0.80–€0.97 excl. taxPreliminary estimate for one variant
Never accidentally open the dishwasher when it is running when you have this shamrock shaped dishwasher "running" sign! This is a print done with the MMU2S on an MK3S+. Printed as one piece using the multi-material functionality. The…
Print approx. €2.78–€3.40 excl. taxPreliminary estimate for one variant
🏆 Thrilled to share that I've been nominated for Platform Designer of the Year at the 3D Printing Industry Awards 2026! If you enjoy this model, I would be incredibly grateful for your vote. [Click here to vote for Thorin Oakenshield]…
Modeled from scratch, inspired by lwx007's design: Thingiverse #5685812 I saw some comments about difficulties with the original model requiring assembly or gluing, and decided to make a model that can be printed in a single piece and…
Generate your own nuts, bolts, washers and threaded rod by simply typing the required parameters into OpenSCAD. Great for replacing metal equivalents in many applications. Includes options to generate nuts, bolts, washers and WingNuts for…
Base The base includes bolts , nuts and washers of M2 - M48 . Separately models are placed in specific folders. All data collected in All_in_one.dwg file (autocad). !Attention! Be careful when using for accuracy critical parts (or use…
Update: 2025-11-13: Added a remix for a laser-cuttable model. https://www.printables.com/model/1479675-dishwasher-tablet-dispenser-laser-cut-version Dishwasher Tab Dispenser – Sturdy & Simple A no-nonsense, ultra-durable 3D-printed…
Inspiriert von vorhandenen Beerenwaschschalen – dieses Modell wurde vollständig neu konstruiert und besteht aus nur einem Teil. Zum Einsatz einfach ins Spülbecken stellen und Wasser einfüllen. Dabei entsteht ein Strudel, der die Beeren…
This automatic fruit and berry washer is lightweight for its size, requiring less than 200g of material to print, and performs exceptionally well Simply turn on the water, and it handles the rest efficiently. It is ideal for fruits,…
Changelog: Changelog 30.07.24 New Gridformat added (3x1, 3x2, 3x3) with heights from 4U to 14U 26.07.24 Request fulfilled by @manofthesky_692784 : Magnetsocket added 18.07.24 STL files added as an alternative to 3mf format These…
These M3 nuts, washers, and bolts were designed in Fusion 360. You can buy them on Amazon here: Screw Bolts and Nuts Set - M2 M3 M4 M5 M3 Square Nuts Lock nuts set - M3 M4 M5 M6 M8 M10 M12 I measured them with a digital caliper accurate…
fruit washer for fruits. wash your fruits easily
Saw a few of these posted, but decided to design my own. A half twist of the knob switches between "Cllean" and "Dirty". I printed the Letters.stl in 2 colors. The first 1mm was the printed in the desired letter color (white). The rest…
Here is a very simple OpenSCAD source file to create washers of any size. There are three variables at the top (outer and inner diameter, and thickness) change them to suit your needs. Printed at 100% infill the washers are surprisingly…
Updated 10/16/2024 to fix problematic lever, with new meshes and .f3d --- Nothing too special here. We wanted a simple clean/dirty indicator for the dish washer. Sticks to the dishwasher with some embeded magnets. Included fusion file for…
🔩 Washers Collection 2 – Imperial & Metric Sizes 🔧 I greatly appreciate every like, comment and download! 🛠 A versatile set of printable flat washers designed for various bolt sizes . Perfect for DIY projects , mechanical mockups , and…
I have very much been enjoying the Playing Card Shuffler V3 by @LukasCenovsky Find it here < Playing Card Shuffler v3 by Lukas Cenovsky | Download free STL model | Printables.com > As with many innovative solutions there can be…
Multicolor dishwasher sign no painting/MMU The sliding mechanism feels very satisfactory because the magnet makes it snap into place. I printed everything at 100% for a snug fit. So the text plates and magnets don't require any glue, i do…
A small selection of the 25k+ nuts , bolts and washers STL Hardware Parts have in their library. They also fit onto standard nuts & bolts perfectly. Recommend printing at 0.12mm. M10 Washer M10 Round Head Cap Bolt - Thread Pitch 1.5mm M10…
M3 Metric style washers in 9 variations of outside diameter: 7, 8, 9, 10, 11, 12, 13, 14, 15 mm.
fruit washer and drier. small and large. can also do vegetables.
Needed some washers, decided to make my own after some usual metric DIN standards. DIN 125 - Washer DIN 9021 - Big Washer DIN 6796 - Load washer
Introducing the StreetBasher. A high performance AWD 1/7 scale street drift car. Engineered for enthusiasts who appreciate the thrill of DIY projects, the StreetBASHER is not just a RC car, it's an experience waiting to be crafted.…
These M3 nuts, washers, and bolts were designed in Fusion 360. You can buy them on Amazon here: Screw Bolts and Nuts Set - M2 M3 M4 M5 M3 Square Nuts Lock nuts set - M3 M4 M5 M6 M8 M10 M12 I measured them with a digital caliper accurate…
Designed for storing 1kg of dishwasher tablets. Tablets dispense automatically due to the sloped interior. Print orientation:
Have you every wanted to snag a bowl from the dishwasher for a big bowl of cereal in the morning, but was unsure if the dishes in the dishwasher were clean? Well, now you can know for certain! Just use this Dishwasher Status Selector…
It's kinda awkward to pour in fluid under the frunk, so hopefully this will make it easier. It fits really well, snug but loose enough for guaranteed fit by any printer. I drew a compact washer fluid funnel for Tesla Model 3 using…
Hope this helps somebody out took a long time to make so if you can I would greatly apreciate a like, download or both thank you! If your slicer asks you to recalculate the object select the option NO.
This is my take on a dirty/clean dishwasher indicator. There are some amazing versions of this print out there, but this was how I wanted mine. Print Instructions PETG seems to work well at 0.2mm layer height. Try out some more materials…
I like the vertex fruit washer from Perinski , but it requires support for nearly the complete bottom. This model is a fixed version. It requires minimal support and prints nicely. If you wonder if this really works, it does. Kids love…
New gadget for your kitchen - Dishwasher tablet dispenser. WAF (Wife approval factor) near 100%! Mounted on double sided tape in any place you want. Also could be mounted angled. Tablet size up to 30mm x 40mm. If your tablets doesn't fit,…
To replace a broken washer fluid reservoir cap for a OPEL Astra J OPC and some other OPEL models ;-) Original Part No. 13227300 Just printed in PETG orange / black. To hold the cap down i insert two magnets (4,5mm x 1,5mm x 9,5mm). MMU…
Fruit washer bowl from Thorin Oakenshield. Fits on the 220 by 220 mm buildplates of the Ender 3/K1 variants.
Fender washers in all of the sizes typically sold in assortment packs. Parametric f3d included for custom sizes. Public domain license. UPDATE 2026-05-14: Re-rendered all STLs with correct inner diameter. Previous ID was set to exact…
Based on the great model by @ KaliM. UPDATED VERSION v3 on December 1st 2024. Changes : Walls are thicker (3 layers) Vertical hole at the front is bigger: easier to guide tablets going in Hole to retrieve tablets is bigger (vertically &…
Dishwasher Door Prop Opener: A 3D-Printed Solution for Moisture-Free Dishes Overview Is your dishwasher retaining moisture long after the wash cycle is complete? Say goodbye to musty smells and hello to sparkling, clean, dry dishes!…
M3 HEX bolts collections. Threat pitch : 0.7 sizes: m3x5 m3x8 m3x10 m3x12 m3x15 and by 5mm steps to 100mm All models are exported with tight tolerances. It is neccessary to adjust X/Y hole compensation for nuts according to your printer…
Help: Every washer is 1mm high , if you want higher washer just scale it in Z direction by this formula to get desired height : height[in mm] = percentage/100 ID - Inner diameter, OD - Outer diameter Expectations: Don't expect a washer…
If you like it feel free to leave a comment or buy me a "coffee": https://www.buymeacoffee.com/redangel1984 These little (or bigger) boxes can be stacked on your desk or glued using double sided tape under the edge of a table or shelf to…
This is my design of fully functional washers with built-in structural support. I created them for the FFF process to be printed using PETG or ASA material. Printed with the correct settings and materials, these washers are quite strong…
M8 HEX bolts&nuts collections. Threat pitch : 1.25 sizes: m8x5 m8x8 m8x10 m8x12 m8x15 and by 5mm steps to 100mm All models are exported with tight tolerances. It is neccessary to adjust X/Y hole compensation for nuts according to your…
M4 Metric style washers in 9 variations of outside diameter: 9, 10, 11, 12, 13, 14, 15, 16, 17 mm.
This is the dishwasher indicator I've had stuck to my dishwasher for the past few months. I saw that there was a mechanical marvels contest going on and figured now is as good a time as ever to publish the work! If you ever dreamed of…
M5 Metric style washers in 9 variations of outside diameter: 10, 11, 12, 13, 14, 15, 16, 17, 18 mm.
Need a custom-size spacer or washer? Just plug in inner diameter , outer diameter , and thickness , and export an STL
M6 HEX bolts&nuts collections. Threat pitch : 1 sizes: m6x5 m6x8 m6x10 m6x12 m6x15 and by 5mm steps to 100mm All models are exported with tight tolerances. It is neccessary to adjust X/Y hole compensation for nuts according to your…
M6 Metric style washers in 9 variations of outside diameter: 12, 13, 14, 15, 16, 17, 18, 19, 20 mm.
so fun to print and use but support may be needed
M5 HEX bolts&nuts collections. Threat pitch : 0.8 sizes: m5x5 m5x8 m5x10 m5x12 m5x15 and by 5mm steps to 100mm All models are exported with tight tolerances. It is neccessary to adjust X/Y hole compensation for nuts according to your…
These M3 nuts, washers, and bolts were designed in Fusion 360. You can buy them on Amazon here: Screw Bolts and Nuts Set - M2 M3 M4 M5 M3 Square Nuts Lock nuts set - M3 M4 M5 M6 M8 M10 M12 I measured them with a digital caliper accurate…
Washer and spacer are fitted to go through a pegboard hole for easy mounting that doesn't require an extra set of hands. This will keep your pegboard just far enough off the wall you are mounting it to, plus it gives you flexibility in…
Windshield Wiper Washer Fluid Reservoir Tank Bottle Cap (For Peugeot and other cars). Printed in TPU (230/50), without supports. Included Solidworks file for editing and customizing :) Print instructions Category: Automotive Summary…
M8 Metric style washers in 9 variations of outside diameter: 16, 17, 18, 19, 20, 21, 22, 23, 24 mm.
Summary This is a 3D-printable flasher pattern based on the work of Shannon Zirbel, Robert Lang, and several others. It demonstrates the ability of the flasher pattern to go from a flat state to a much more compact, folded state, all…
M4 HEX bolts collections. Threat pitch : 0.7 sizes: m4x5 m4x8 m4x10 m4x12 m4x15 and by 5mm steps to 100mm All models are exported with tight tolerances. It is neccessary to adjust X/Y hole compensation for nuts according to your printer…
Tired of ugly screw heads ruining the sleek look of your 3D printed parts or woodworking projects? Welcome to the Ultimate Countersunk Washer Collection . This comprehensive hardware set is engineered with precision to perfectly hide…
These M2 nuts, washers, and bolts were designed in Fusion 360. You can buy them on Amazon here: Screw Bolts and Nuts Set - M2 M3 M4 M5 M3 Square Nuts Lock nuts set - M3 M4 M5 M6 M8 M10 M12 I measured them with a digital caliper accurate…
V2 Version 2 has some corrections after community feedback. V1 and V2 parts should be compatible Main body now has a slope so tablets slide out better Opening on the front is slightly bigger Printing Instructions The design is split so…
A jig for stamping your bitcoin mnemonic on DIN9021 M8 washers with 24mm outer diameter. Because of endless warping issues with the original “blockmit” V3 jig design, I made a new, more printer friendly design. Adjust for your stamps and…
Every time I loosen up the two Idler tension screws and open the MMU2s one or both of the screws and their springs would fall out. They would bounce around and play a mean game of hide and seek. So I made these little guys. Literally the…
dishwasher sign clean/dirty print-in-place This is a Remix of Sliding Word Changing Dishwasher Sign by middlefingerboss Thank you for this great idea! I am not sure if this is the best idea I have had so far. Designing this as an assembly…
Collection of washers including : M3, M4, M5, M6, M8, M10, M12, M14, M16, M18, M20, M22, M24. For general purposes PETG, PLA works ok. For some demanding application I would choose tougher material. If the fit is too tight, I would…
An easy “my first TPU” print for those starting out - and very useful. Presenting a simple garden hose end washer - complete with little tabs to prevent it from falling out once installed in your hose nozzle or sprinkler head. Update:…
for my Dishwasher i have created 180x60x132 Print instructions I have printed it with "Black EasyABS filament 1kg - Diameter : 1,75 mm " Works fine ;) Don't print it with PLA for dishwasher!!!!!! :D
Yet another Dishwasher Label Features: Different colours for ‘CLEAN’ vs ‘DIRTY’ Slide easy side to side and wont come out No Multi material required Give it a try
I ran into some snow in winter and lost the right cover of my headlamp washer. There seem to be two versions of washer covers out there and when I ordered a replacement, I always got the wrong one. 3D printing to the rescue... It was…
The original design didn't quite fit. so i took the f3d file that the original auther provided, and added a small cut to the lever. Now everything fits snug. thanks for that amazing design! Credits go to @FMD →…
This is a quick remix of the popular dishwasher tablet dispenser designed with speedholes to save material during printing. I have also changed the attachment system to only require one screw near the top (keyholed).
M3.5 HEX bolts collections. Threat pitch : 0.6 sizes: m3.5x5 m3.5x8 m3.5x10 m3.5x12 m3.5x15 and by 5mm steps to 100mm All models are exported with tight tolerances. It is neccessary to adjust X/Y hole compensation for nuts according to…
Introduction This is a remix of the excellent dirty/clean dishwasher sign by Printess . It differs in that the base is printed vertically with two colors of filament, with the color changing midway up at about 45mm. That way, the dirty…
Countersunk washers for M3-M10. Use in cases where a countersunk screw would split the model apart. Category: Other
Introduction Refilling windshield washer fluid can sometimes be a mess, but not anymore! This funnel is designed to be used when refilling windshield washer fluid with minimum waste of washer fluid. Features Handle: This funnel has a…
Spare part funnel for Bosch or Siemens dishwashers to refill salt. Fits probably other brands as well. Funnel diameter 45mm.
