Counting matching models…
My skimmer basket broke over time, so I modeled another one. The outer diameter is 165mm. It prints in two parts to avoid having to print support, you just need to glue the two parts together either with super glue, or simply by melting…
Print approx. €2.31–€2.83 excl. taxPreliminary estimate for PETGSource material: PET
FR: Juste une petite palette avec différents angles pour masquer certaines zones lors de vos peintures avec aérographes (ou pinceaux) EN: Just a small palette with different angles to mask certain areas when painting with airbrushes (or…
Print approx. €1.13–€1.38 excl. taxPreliminary estimate for one variant
Based on the 2014 movie, “Edge of Tomorrow” , which was an adaptation of the Hiroshi Sakurazaka novel, “All you need is kill” (2004) , this remix adds to the excellent model provided by Captain Crunch. This was a multi-week project, but…
Print approx. €2.04–€2.49 excl. taxPreliminary estimate for one variant
maybe i have to ajust later the drives for perfect match.
Print approx. €3.90–€4.77 excl. taxPreliminary estimate for one variant
Made a simple adapter to make it possible for LED-light mounting. This design requires you to remove the original debris shield.
Print approx. €0.69–€0.84 excl. taxPreliminary estimate for one variant
24 mm masking tape is the perfect kitchen accessory for labeling food in the freezer. They don't come off easily. I'm using several rolls with different colors in the kitchen. This tool is a tape dispenser with a built in hole to a…
I designed this Masking tape holder in SOLIDWORKS for the Printables Tape Organizers and Dispensers contest (23/06/2023). It's an easy print in STEP & STL & 3DM files without supports, already orientated correctly. No additional…
I remixed the original to fix a few issues I found when using it with my masking/painters tape. Problems The U shape that slid on from the side This design of the original made the model inherently roll thickness specific so as you used…
This 2x2 gridfinity block dispenses Tamyia masking tape in 3 different widths: 6mm, 10mm, and 18mm.
This is a redesign of my previous tape dispenser. I have created a middle hole on it to be able to hold the dispenser on your thumb. The idea came from the diver's finger spool (in case if you are a diver I have an other nice model for…
Created this tape cutter inspired by tadpole style tape cutting attachments. Secures directly to a roll using a rubber band or hair tie. Works great on 24mm (1 inch) rolls of masking tape. 37mm version works but is slightly harder to use.…
(V2 is available here: https://www.thingiverse.com/thing:6168143 ) Recently I saw a useful hand tool, to easily and quickly apply a masking tape. This guy has made this tool to be sure to apply the masking tape parallel to the edge.…
Jag har designat två adaptrar som gör att man kan använda Parkside batteri till Meec och Biltema maskiner, som enbart har positiv och negativ kontatker, alltså ingen signalsladd. Adaptrarna sitter bara fast genom friktion alltså ingen…
A simple masking tape dispenser for rolls ~75mm inner diameter and ~20mm width. The tape holder allows the roll to move easily for easy unspooling and has a built-in serrated edge. Just grip the central bar in one hand and pull the tape…
I have added a functionality to my masking tape roller. https://www.printables.com/fr/model/907403-masking-tape-applicator I have had to paint a door for one different color on each face. To do this properly, the edge between each face…
Holds an 18mm, 10mm, and 6mm dispenser of Tamiya tape with a side area for spare rolls. No mag holes
Designed for quick access to masking tape for labelling. Originally designed to be used in commercial kitchens but does well in my workshop as well. Fits 77x24mm masking tapes and is designed for use with a standard fine point sharpie…
Organize 18,10 and 6 mm Tamiya Masking tape dispensers on your Ikea Skadis board. See also my other designs for more ways to Organize your Tamiya tools on the Skadis board.
Masking tape (washi tape) cutters for masking tapes with sizes 15mm, 20mm, 30mm, 35mm. The hinge is quite fragile so please be gentle when you mount the cutter onto the masking tape. Please print with brim.
Do your tapes get dirty on the sides if you leave them in the right place? This tool neatly stores them on the pegboard in front of you! Tape diameter: 55mm Inside dimensions are available in three widths: 21.4mm, 46.8mm, and 72.7mm The…
I made this dispenser to house common 25mm masking tape, it should work like those smaller tape dispensers. you can also fit pretty much any tape as long as the inner diameter is ~76mm. you will need 5 screws 3*M3*25, 2*M3*30 to install…
Fast design on f360 to suit some masking tape of 18mm I have. Printed with a 0.6 nozzle with 0.3 layer height.
Sailboat rope organiser - NOW WITH MASKING TOOL FOR EASY INSTALLATION UPDATED DESIGN: Use the masking ring to easily glue the hook and form a beautiful joint. The rope organizer hook secures your coils of rope in your cockpit. Use 3mm…
Wall mounted tape dispenser holds two, 1 inch rolls or one, 2 inch roll. Holes will fit an M6 screw Print 2 tape adapters for a 2 inch roll. If you need it to face the other way you can mirror it in your slicer.
The best way to write the contents of the storage bags/boxes/etc. you put to your freezer is to use the thinnest painter's masking tape - they will stick and hold properly in the -18 ℃ environment. The STL was generated to hold 2 pcs of…
This is a 2x1-grid, half height, storage box for Alexandre Chappel's 55mm grid system (see https://www.alch.shop/shop/assortment). This system is older than the popular gridfinity and i have tons of drawers and tool organizer that I use…
I designed this platform for my turtle, I use it in a medium IKEA Samla container, placed in a corner on the top of the container. To stop it, simply use bolts with nuts and washers. the size is 150x200 mm To have good rigidity we…
DISCLAIMER: This mount is designed for the orange Hot Wheels builder tracks. I haven't tested it on other tracks yet. My goal was to create something that attaches to walls without causing damage—no scars, holes, or messed-up paint. How…
Universal TV Cable Cover – Modular, Clean, 3D-Printable Cable Management Looking for a simple, clean, and practical way to hide the cables running to your wall-mounted TV? This model was designed exactly for that! This is a modular cable…
Either stick to a surface using double sided tape, or twelve (quantity of 12) 12mm x 3mm neodymium magnets. Printed out of TPU 98a for added durability. Use flush cutters to remove tree supports from the two retention tabs that hold the…
This is a masking tape dispenser designed to work with Gridfinity. Features: Hollow body so you can add weight using sand or lead shot. Thread-in plugs seal in the loose material 3 Cutting blade options: Print the included file Trim a…
Basking Platform for Aquatic Turtles The ramp and two clips come together to attach to the top of an aquarium. When connected, a paper clip or toothpick is used to secure the pieces to one another. No bolts needed. The clip piece is…
I decided I wanted a holder for my multiple rolls of blue painter's tape. I couldn't find a holder I really liked, so I came up with this idea that I could mount to the side of a cabinet. Can either use the two screw holes, or double side…
Back slider that can be used instead of a straw. Made for masking tape that is 24mm wide, however, should be scalable.
Designed to hold ~20mm-wide masking tape, with a small gap at the top to make it easy to grab the tape while leaving minimal exposed sticky tape area. I've been doing a lot of packing lately. While other models are great, some can't fit a…
Diese Figur ist ca im Massstab 1:24 und ideal für Resin Druck
Masking rosette for Fi 24 pipe such as gas stove drain. The size is matched to the pipe perfectly. I am sending a file to fusion 360 you can change the dimensions of the model based on it. The model is connected to the plug. It does not…
I designed this Turtle Basking Area piece that fits on an Ender 3 bed (235x235mm). You have to print two copies. After that it hold on to the glass very tight so you don't need to glue the parts. The upper part is cut for 3mm acrylic…
Honeycomb Storage Wall holder for 6mm, 10mm and 18mm Tamiya masking tape dispensers.
Dispenser for rather small masking tapes with inner diameter > 25 mm and width < 20 mm. Assemble two parts together to holed the tape. The looseness between the two parts can be adjusted by attaching some tapes around center circle of…
i have a turtle and decided that i would make a basking platform cuz mine is broken
Well, this thing required many replacements over time at my house. Although it is not recommendedI to use PLA with water I used PLA with 30% infill. Eventually using PLA may be the reason why I need to replace this thing once per 6 months.
Tape dispenser is suitable for packaging tape, duct tape, or packaging tape. Fits 50mm (2in) wide, 75mm (3in) diameter rolls. Notes: There is no cutting edge in the model. Attach a small blade to the dispenser's end with glue. There is a…
Masking tape dispenser up to 38mm wide rolls. You need two printable bearings for both ends of the hub, the cap locks the hole assembly together. The bearings need freeing-up before assembly. You could apply some silicon or PTEF-lubricant…
12x3mm magnets fit tightly
How to i open or close doors, how to i press buttons in atm or elevators without touching anything?How do i open parcels? carry small bags without thouching anything? Well here it is !! Multitasking everyday tool. Completely soap washable…
Only had 6x3mm magnets - allows for 10x (probably overkill) No glue required - designed so it will be press fit First ever remix Printed in PLA-CF 0.16mm 5 walls 15% gyroid infil Supports on build plate only for magnet holes (Top Z…
This model is a variation of my other models. It's purpose is to exercise interesting design and function. It is printed in place, in plain that gives it most strength. It is foldable, to make the final piece, and it snap fits to hold…
Very simple print, .2mm layer height, no supports. Holds Tamiya Masking Tape in or out of the plastic holders.
Cirle cutter for masking tape. Similar to DSpiae cutter PT-C, it has 3 main parts: Circle cutter (you can print only it if needed) Locator for cutting positioning ( need to cut transparent platstic and mark a tagret on it, Cross and…
I modeled a tool for practicing scribing and painting techniques for model kit building and customization. I got the idea from this EA Gunpla video where he took a blank sheet of PLA plate and demonstrated some techniques. I've included 6…
PLA Supports are not needed
A small runner that sits on top of your tape to give you a straight edge to tear against. I use it for masking tape personally and it works great. Chamfered edges make it comfortable even when down at the end of a roll, it has a small…
This is a remix of a StoneTaskin JRY-W9RQUHD-SA1 Driver Board holder for an iMac 27 retina 2017. The original part: https://www.thingiverse.com/thing:7044482 I modified the upper bracket to fit for iMac 2017 housings which have slightly…
Element caps to be used to replace the original red plastic caps for many different arrow antenna versions.
Cable tie container - 100mm, 150mm, 200mm, 250mm. Pojemnik na trytytki…
Tamiya recommends using the tape dispenser "backwards" so it cuts the backside of the tape, and you can stick the loose end to the rear of the dispenser across the circular notch. I prefer to use the dispenser the other way around, but…
Adapter wielokrotnego użytku. Zaprojektowany w celu zmniejszenia kosztów ćwiczeń związanych z wykorzystaniem technik obezwładniających i unieruchamiających. Wytrzymałe i lekkie tworzywo sztuczne PETG zapewnia komfort użytkowania.…
A simple bench mounted dispenser for standard masking tape rolls. (will not fit the wider type of roll). There are 2 screw holes to mount the dispenser to a table/work bench. I have included a 3d printed plastic blade that seems to do the…
just like you i love my turtle and i want her to be comfortable and healthy i couldn't find a 3d model that fit her size or were just bad so i made this platform fully assembled with super glue after finishing the base and ramp i made a…
Sink overflow drain masking - blind
Soporte porta rollo para la cinta de pintar, permite cortar pequeños trozos con una sola mano.
Masking tape holder to wall mount masking tape. I made mine in Petg because that's what was in the printer. This model is for a two inch tape roll. Step and Fusion files included modify as necessary. I printed it on the mounting surface.…
Masking slides for making double exposures with Polaroid SX-70 or 600 type cameras. Slides A and B expose inverted areas of the film. Print Settings Printer Brand: Prusa Printer: Prusa i3 MK3 Rafts: No Supports: No Resolution: 0.1 Infill:…
Used to replace the latches on a bayou 300 or maybe a 220 or 250
Zona di Basking per Tartarughe d’Acqua – IKEA SAMLA Piattaforma di basking stampabile in 3D, progettata su misura per le vasche IKEA SAMLA 57×39×42 cm , ideale per offrire alle tartarughe d’acqua una zona asciutta e sicura dove riposare e…
Při krmení ryb v jezírku zabraňuje nasátí potravy z hladiny do filtrace.
Two versions of a corner hide. One is a standard solid top, the other is to allow for cryptic basking while inside. NO TOP Print upside down Supports: No Brim/Skirt: No Infill: 25% I did two layers of window screen. First screen is at…
Similar to others out there, I made this from scratch in FreeCAD as a learning item and it turned out pretty useful.
I designed this US box track tool which is used as a guide to trim masking tape when building a DIY hydrofoil board. If you find this useful and would like to show your support, please buy me a coffee :)…
This is a masking tape cutter similar to the original, but much much smaller. In downsizing, I lost the slot to hold the working end of the tape. I like to write on my tape before tearing it off, and the slot interfered with that. To use,…
Inspired by @chip 's model, but made for bigger tape rolls. By default it fits standard 75mm inner-diameter masking tapes, up to 120mm outer diameter and 50mm width. Parametric fusion model is included.
Zamiennik oryginalnych, nie wygodnych nóżek.
The Taski Vacumat Plus (Nilfisk) has a tendency to break the clips. They are hard to get original, so here is both the clip and the link. Most often it is only the link that break and can with this part easily be replaced. I recommend…
Keygaurd for LAMP in a LTROP case with masked cells for early learners. No mounting, use micro suction tape to secure. The second has tabs.
A masking tape and gluestick holder that can be mounted on the rails of the Lotmaxx SC-10 Shark. It was designed to fit the Lotmaxx SC-10 Shark (V1), but it should fit also other printers that use the same rail system (ex. Lotmaxx SC-10,…
Safety Side, Cover or Top for the Masking Tape Holder / Dispenser of Slavik Kopanov. TY Slavik!
Masking bracket for powered USB ports found in POS5000 extension card. This model should be considered as WIP since It requires the removal of extension card and the use of masking tape or hot glue If you want to attach it to the back of…
Uchwyt do pasków na głowę sam wykorzystałem paski od starej latarki czołówki, zdaje egzamin.
Printed out of TPU for flexiblity/durabilty if it gets knocked or dropped.
Make Your Bikes Rear End Look Much Better . The indicator holes might need tweaking.
FUNNYYYYYYYYYYYYYYYYY!!!!!!!!!!!!!!!
***WILL NOT WORK WITH TAMIYA STANDARD MASKING TAPE*** Created a tape dispenser for Kamoi Masking Tape. I BOUGHTthis tape on Amazon as a alternative to Tamiya masking tape. When I bought the taper I realized that the tamiya dispensers…
This model will keep your masking tape from being dented. Because if i gets dented it will rip and will be hard to use. It also has a slot for the tape to come out of you don't want to take it out. I used 5% infill and no supports with no…
Idealnie nadaje sie do próbek filamentów
I wanted to keep the tape across the concave section so that you can easily pick up the tape holder and tear off a piece.
I made this rod using FreeCAD tools, for some reason my slicer believes there to be a problem with the mesh files however it prints fine when i tested it. It has 1mm extra half discs around the end as most examples (my turtle tanks') had.…
The levitating plushy magic built for social media. Effect demo: Another Effect demo: Video instructions: Designed in Hong Kong. Category: DIY
No more fumbling trying to find that roll of masking tape on your art table. This holds a 1" wide by 60yds long roll of 3m masking tape for quick access. Print requires supports , i prefer regular supports for the skadis hooks and tree…
This is a 3D-printed replacement part for the original trigger/lever of a TASKI floor polisher. I measured the original part and recreated the geometry from scratch. On my machine it worked correctly, but since this was one of the first…
I didn't want to use the folded tape wheel design in the original so I made this version instead! The wheel can be printed flat on one side, and the axle can be press fit with a little effort. Optionally you can secure it with a little…
This is a wall mount for typical hobby tapes. It fits all my tamiya masking tape, washi tape, graph tape, and electrical tape. It has holes in it so you can use pushpins to hold it to the wall. You can also use command strips, or drill…
![[ALCH] Storage for Tamiya 6 / 10 / 18mm masking tape set (ModuBox)](https://media.printables.com/media/prints/467300/images/3830619_3d7a7bcd-3a25-4fc4-b93f-1ad62c040b8b/alch-tamiya-tape-1.jpeg)
