33 models
The assembler from Factorio is ready for printing. It shares the same scale as all other official Factorio models. The assembler can stand alone or could be placed snugly into tiles that are part of our grid system. Grids are included in…
The original cube background panels look wonderful, but I really wanted panels that assemble into a cube and I also wanted to spend less material per panel. So I made my own version. Simply print three or four panels and slot them…
Self-assembling "virus" (dodecahedron). Demonstrates how viruses self-assemble via symmetric interactions of subunits that have favourable interactions with each other. Original model (self_assembling_virus) is adapted from…
THIS IS NOT A JOKE! I strongly suggest you guys open up the back panel to check your Qidi Q2 machine first when you have recieved it. There is an assembling faulty which could happen on your Q2! By default, the toolhead cable in the back…
This print technic I used to avoid support and to get model flex, assembled and locked with pins after the end of a print. And you are not limited with number of modules. You can build it endlessly if you continue with Levers instead…
I found a good screw organizer and decided to add numbers to help me know the order the screws go when i am disassembling and assembling something again.
Thanks to @GR_388774 and @@Thomas_50404 for their design. The watch charger (I use it for my AirPods) is not snug enough to hold the charger tight. I just put a piece of the purge line between the charger and the part. That will fix the…
This is a stackable screw mat. I designed it because I kept losing tiny screws while working on electronics projects. The compartments are filleted at the bottom so tiny screws don't get stuck in the corners. I recommend that you print in…
This one is pretty self explanatory. It's a hammer! Use it to tap, persuade, nudge, peck, or even slam printed components together without damaging them. Includes both a large and small flat face for various use cases. I printed it with…
Vor- und Nachteile auf einen Blick: + Verkleinerung/ Kompakter (45 cm x 35 cm x 20 cm) + bessere stabilität der z-Achse + schneller Ab- und Aufbau (Montagehilfe) + einfacherer Ab- und Aufbau ohne Werkzeug + weiterverwendung der…
INTERIOR DECORATION: Assembling the pieces of the ‘Organic Puzzle’ Description I’m not sure how I came across this image of a jigsaw puzzle made up of four pieces. I thought that if I redesigned their front faces in an organic style and…
This tiny garden scarecrow adds a cheerful touch to your outdoor space while gently keeping small birds away. Easy to print and assemble, it’s made of three parts: a base that you can gently press into the soil, a central support, and the…
Intended for the hobby electronics builder, these trays organize the parts used in most electronics projects so that when soldering, you can just grab the part and solder it rather than searching through a pile of parts. Each slot type is…
A tool that helps you create, assemble tables, shelves and many other square things. Inspired by many others, you will find the CAD file in order to modify, according to the size of the members used. Printed in 8.4 hours with an ENDER…
A replacement disassembling latch pin For the Tarus Millennium G2. Mine flew away while I was doing some maintenance. I recommend using a solvent resistant material like nylon to print it, but PLA should be fine.
You can print a few of these to help assemble the rocket parts instead of a ½" wood dowel.
This is a magnetic, self-assembling Dodecahedron sphere. It's built up around 0.375x0.1875in (3/8x3/16in) radially aligned magnetic cylinders. You can find them at K&J Magnetics. (Like so:…
Introduction Yeah, I know. You are not as stupid as me by pressing the brake pedal when the calliper was not mounted. And that's not the reason the cilinder came out of it, right? But still, you do have the same problem: you need to get…
No supports needed
Vice for assembling top frame of Prusa Lack Enclosure V2 to avoid delamination of printed parts.
This comprehensive 3D printable accessory set is designed to help you assemble partitions using 18mm boards. The set includes essential components such as foot accessories for stable support, panel connectors for seamless joins, and wall…
This is a tool for assembling printed discs, so you don't break the threads during assembly. Screw M4 х 50 - 1 pcs. Extended nut M4x7x12 - 1 pcs. 0.2mm layer, 5 walls, 50% infill Check out my collection of wheels for RC cars:…
Print from any hard plastic.
Diese einfache Haltevorrichtung für die Spulenkerne von wiederbefüllbaren Filmpatronen erleichtert das Zerlegen und das Zusammenbauen der Klemmvorrichtung. Einmal nur als kleiner Block und einmal mit einer Tasse rundrum damit die kleinen…
This one is pretty self explanatory. It's a hammer! Use it to tap, persuade, nudge, peck, or even slam printed components together without damaging them. Includes both a large and small flat face for various use cases. I printed it with…
THIS IS NOT A JOKE! I strongly suggest you guys open up the back panel to check your Qidi Q2 machine first when you have recieved it. There is an assembling faulty which could happen on your Q2! By default, the toolhead cable in the back…
Print from any hard plastic.
This is a tool for assembling printed discs, so you don't break the threads during assembly. Screw M4 х 50 - 1 pcs. Extended nut M4x7x12 - 1 pcs. 0.2mm layer, 5 walls, 50% infill Check out my collection of wheels for RC cars:…
I found a good screw organizer and decided to add numbers to help me know the order the screws go when i am disassembling and assembling something again.
Plenty of scope to make your own clamps, extensions etc. If using for soldering then put some water in the bottom, or a damp cloth or you could melt the tray. Only part that may need support are the clamps, all the rest no support needed.…
A dagger or mini-sword that can be disassembled and reassembled easily for transport, with no glue, screws, or other adhesive required. The pommel and handle screw together and into the crossbar. The blade and crossbar slot together with…
![Foldable [PMFC] Prusa Mini Fast Compact Mobil Transport Assembling Mod/Kit/Addon for hand baggage](https://media.printables.com/media/prints/136275/images/1299962_76a63b45-4b6d-40e0-b4e5-a0495be4773b/img_20211208_181711_578.jpg)
