5,201 models
Ringosaurus: the prehistoric protector of misplaced rings. A dinosaur-sized solution to disarray. This long-necked legend brings the Jurassic to your jewelry collection. Holds rings on the neck and tail. Holds earrings and other jewelry…
Print approx. €1.13–€1.38 excl. taxPreliminary estimate for one variant
The Velociraptor Head is a little more complex to print than many of my other animal heads because the teeth require support. You will probably also want support for the back of the jaw, but this model printed fine for me without support…
Print approx. €21.38–€26.13 excl. taxPreliminary estimate for one variant
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Brim needed Scale it as you like :)
Print approx. €7.23–€8.83 excl. taxPreliminary estimate for one variant
This is a really simple print. It requires no supports and it is print in place. This print takes about 3 hours to print. This model was designed and sculpted in Blender. It was my first time making something in Blender for 3d printing.
Print approx. €2.43–€2.97 excl. taxPreliminary estimate for one variant
Chickens not included! This is not original with me - just a print I made for someone from the file here : https://www.thingiverse.com/thing:4614774 Print instructions Print in PLA using the 3mf file provided; otherwise : 0.2mm layer…
Print approx. €1.64–€2.00 excl. taxPreliminary estimate for one variant
Easy-Install Hinges for Your Centauri Carbon Side Panel Tired of removing the whole panel just to get inside your printer? These side panel hinges let you swing open the right-hand panel of your Elegoo Centauri Carbon like a door, so you…
Print approx. €4.01–€4.90 excl. taxPreliminary estimate for one variant
An improved dinosaur mobile phone inspired by Max Harrington (Thingiverse: @airplanenerd) This cute dinosaur phone stand is the perfect addition to any desk, table, or nightstand. The stand is designed in the shape of a cute dinosaur,…
Print approx. €1.81–€2.22 excl. taxPreliminary estimate for one variant
Set size to 465mm, cut into 3 pieces to fit on an Ender 3 and added connectors to make assembly easy. Set to 10% Gyroid infill on Pursa.
Print approx. €12.78–€15.62 excl. taxPreliminary estimate for one variant
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Scale it as you like :)
Print approx. €11.27–€13.78 excl. taxPreliminary estimate for one variant
I printed in PLA Infill: 15% Layer Height: 0.10mm Supports: Yes, organic If you like my work consider Buy me a coffee 😊
Print approx. €0.65–€0.80 excl. taxPreliminary estimate for one variant
This cute dinosaur sand mold will bring happiness to your younglings in the sandbox or at the beach. Printing : 0.2mm layer height works well. Scale as you wish and print with the flat side down without supports. ***UPDATE*** 03.08.2023 -…
Print approx. €3.14–€3.83 excl. taxPreliminary estimate for one variant
This is Version l of the ring holder, designed for the Prusa Ring Holder Contest . It features textured sides and can hold any size ring up to 5mm wide. Please leave a like and follow to increase the reach of the project! The ring…
Print approx. €0.74–€0.90 excl. taxPreliminary estimate for one variant
This model is free and took a lot of work to create. If you appreciate this model, please leave a download and a like! If you print this model, please post a make. About this model Keep your glasses safe. Guard them with a T-Rex! The neck…
Print approx. €17.32–€21.16 excl. taxPreliminary estimate for one variant
Little Friendly Dinosaur that wants to help hold your tiny things with its tiny arms. Can hold rings, bracelets, necklaces. Or maybe it just wants a hug… Brim Recommended
Print approx. €1.60–€1.96 excl. taxPreliminary estimate for one variant
Strong links
Print approx. €2.41–€2.95 excl. taxPreliminary estimate for one variant
This project is a remix of the United Launch Alliance (ULA) upcoming Vulcan Centaur 561 rocket. The original rocket files can be found at…
Print approx. €0.12–€0.14 excl. taxPreliminary estimate for one variant
Low Poly Bulbasaur Planter / Bowl-basaur Remix of R3D's post planter with hole and no hole
Print approx. €4.25–€5.20 excl. taxPreliminary estimate for one variant
Mr. Kim Leng Thai Food Flying Restaurant from the 5th Element. or torture test benchy. ?? kimleng3 = basic model without computer aided orientation. (pick your own orientation) kimlengorientationvs = auto oriented with meshmixer for best…
Print approx. €18.32–€22.39 excl. taxPreliminary estimate for one variant
Easy to make a cute Brontosaurus keychain I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No If you like my work consider Buy me a coffee 😊
Print approx. €0.16–€0.20 excl. taxPreliminary estimate for one variant
Student 3D designer chasing a dream. I don't own a printer yet, but every like and download truly helps. Thank you! All❤
Print approx. €7.59–€9.28 excl. taxPreliminary estimate for one variant
Any feedback would be greatly appreciated . Nozzle: 0.4mm Layer: 0.1-0,2 (Recommended) Supports needed Scale it as you like :)
Print approx. €9.51–€11.62 excl. taxPreliminary estimate for one variant
Funny dinosaur brothers. Guys, don't print just yet! I found problems and will fix them. I will release a corrected version later. Thanks for understanding!
Print approx. €1.61–€1.97 excl. taxPreliminary estimate for one variant
Need to be printed with support. The prepared 3MF files already have it. Organic supports are super easy to remove. Prepare your printers and make your kids (or yourself) happy. I would be happy to see pictures of your prints. Thanks to…
Print approx. €0.82–€1.00 excl. taxPreliminary estimate for one variant
Student 3D designer chasing a dream. I don't own a printer yet, but every like and download truly helps. Thank you! All❤
Print approx. €6.53–€7.98 excl. taxPreliminary estimate for one variant
Student 3D designer chasing a dream. I don't own a printer yet, but every like and download truly helps. Thank you! All❤
Print approx. €6.93–€8.47 excl. taxPreliminary estimate for one variant
Fixed version of https://sketchfab.com/3d-models/minotaur-ai-generated-065a8306b56945a5825127fdfb4a594b Added UV Textures after major smoothing. Smoothed post UV add as well. No idea yet how the individual created this with AI. but the…
Print approx. €18.10–€22.12 excl. taxPreliminary estimate for one variant
Is it practical? No Is it stable? also No but does it look good? YES I would recommend putting the key cap on a key you don't need to use often. You need to forbid the slicer to print support where the key cap is plugged into the…
Print approx. €1.98–€2.41 excl. taxPreliminary estimate for one variant
materiál PLA tryska 0,4 mm vrstvy 0,2 počet kusů naznačen v názvu souboru pro přesné lepení je užitečné používat montážní otvory 1,8mm a kousky filamentu G-code soubory jsou pro různé barvy, G-code soubor “ 6b ” je pro dvoubarevný tisk…
Print approx. €0.13–€0.16 excl. taxPreliminary estimate for one variant
This cute Ankylosaurus in a simple silhouette is designed as a flexi toy for 3D printing without supports. Its clean shape with no internal divisions makes it ideal for beginners and advanced users alike. Suitable as an anti-stress toy,…
Print approx. €0.76–€0.93 excl. taxPreliminary estimate for one variant
Zodiac constellation Taurus keychain. If you print it in one color, it looks good. If you print it in two colors and use a natural or translucent filament as a base, when you illuminate it or place it in front of a light source, it will…
Print approx. €0.49–€0.60 excl. taxPreliminary estimate for one variant
This is a multimaterial remix of Bulbasaur - realistic by and Greg and Bulbasaur - realistic Multimaterial by Me and Poinsettia Ornament by Keenan ( https://www.thingiverse.com/thing:194811 ) I wasn't sure exactly what to named it so…
Print approx. €25.20–€30.80 excl. taxPreliminary estimate for one variant
Female Minotaur.
Print approx. €8.97–€10.97 excl. taxPreliminary estimate for one variant
materiál PLA tryska 0,4 mm vrstvy 0,2 počet kusů naznačen v názvu souboru pro přesné lepení je užitečné používat montážní otvory 1,8mm a kousky filamentu G-code soubory jsou pro různé barvy Další podobné modely lze najít v mé kolekci “…
Print approx. €0.07–€0.09 excl. taxPreliminary estimate for one variant
Hello, Today I have a Tyrannosaurus Dinosaur for you. It is a fairly accurate image. My children like to paint them and then play with them. Also suitable for a Jurassic Park diorama. I used PLA/PETG as the material. You need to use…
Print approx. €3.86–€4.72 excl. taxPreliminary estimate for one variant
materiál PLA tryska 0,4 mm vrstvy 0,2 počet kusů naznačen v názvu souboru pro přesné lepení je užitečné používat montážní otvory 1,8mm a kousky filamentu G-code soubory jsou pro různé barvy, G-code soubor “ 6b ” je pro dvoubarevný tisk…
Print approx. €0.09–€0.11 excl. taxPreliminary estimate for one variant
Template for drawing dinosaurs. Good bed adhesion is needed - PLA will need a well-cleaned plate and may be simpler to print with PETG. The figure outlines are properly sloped so you can draw the figures accurately regardless of angle of…
Print approx. €1.37–€1.68 excl. taxPreliminary estimate for one variant
Badassasaurus : Borderlands 2
Print approx. €16.73–€20.45 excl. taxPreliminary estimate for one variant
There is currently two version for different coin sizes. 24x2.2mm and 25x2.5mm.
Print approx. €0.84–€1.03 excl. taxPreliminary estimate for one variant
Such a cute little dino bride! Printed my version without a support around the tiara, hence the missing swirls in the picture, but I love her anyways. Be sure to add supports and be careful removing any generated supports beneath the veil…
Print approx. €10.83–€13.24 excl. taxPreliminary estimate for one variant
FR : Voici une cale qui permet de monter un capteur de frein magnétique fournis par bafang avec le bbshd (pour freins hydraulique) Tektro AURIGA comp qui était monter sur un vélo Btwin rockrider 520 de 2013/2014. Je l'ai dessiné car les…
Print approx. €0.38–€0.47 excl. taxPreliminary estimate for PETGSource material: PET
Use the 3 color layer changes as specified in the .3mf file. Add an optional peel-n-stick cork backing.
Print approx. €0.93–€1.14 excl. taxPreliminary estimate for one variant
Pour modifier la taille de l'aimant supprimez le et rajoutez un nouveau volume négatif cylindre. La taille des miens est 18 mm de diamètre pour 5mm de haut. Il faut paramétrer le cylindre à 18,6 mm en longueur largeur et 5,1 mm en…
Print approx. €0.66–€0.80 excl. taxPreliminary estimate for one variant
Great for : tissues, phone, remote, nasal spray, small book, keys, small trees and melons. Print parameters Printer : Prusa Mini+, FW 6.1 Material : PLA Nozzle : 0.4mm Layer-height/profile : 0.2 mm speed Supports : none Input shaper :…
Print approx. €10.48–€12.81 excl. taxPreliminary estimate for one variant
UPDATE: New Aurapol/Spectrum Spool Design Supported! This 3D-printed ring functions as a removable platform for NFC tag stickers used in filament spool tracking and management systems. Easy transfer to a new spool thanks to the slot for…
Print approx. €0.50–€0.61 excl. taxPreliminary estimate for PETGSource material: PET
Talon de hauteur 9 cm Pour déco uniquement (pas pour marcher !) Le modèle ne contient pas les chaussures ...
Print approx. €0.41–€0.50 excl. taxPreliminary estimate for PETGSource material: PET
sandpit mould, wall art, stencil
Print approx. €3.10–€3.79 excl. taxPreliminary estimate for one variant
Im Zusammenhang mit dem Bau eines Druckergehäuses ( PrintClosure-Projekt ) habe ich diesen Einbaurahmen entwickelt. In den Rahmen kann das digitale Thermometer-Hygrometer eingeklipst werden. Die Abmessungen des Ausschnitts betragen 46,5 x…
Print approx. €0.20–€0.25 excl. taxPreliminary estimate for PETGSource material: PET
Wall mount for an inroning board (optimized for LauraStar) or any other brand that uses round tubes for the base. Can be fastened to the wall using screws with 4.5mm diameter (the ones coming typcially with 6mm dowels
Print approx. €1.04–€1.27 excl. taxPreliminary estimate for one variant
A desktop sign for people named Lauren
Print approx. €7.55–€9.23 excl. taxPreliminary estimate for one variant
Bitte nehmt an einer Abstimmung teil, damit ich abschätzen kann, wieviel Aufwand ich in meine Beschreibungen einbringen sollte.: https://www.pww2.com/abstimmung NEU: Es gibt zwei Varianten, die sich durch die Art der Wandbefestigung…
Print approx. €0.79–€0.96 excl. taxPreliminary estimate for PETGSource material: PET
Updated the older model, the new box is heavily inspired by the token box by PrintArtificer at Etsy. The box holds a complete set of tokens for the card game Netrunner by Aurbits (2025), this includes the credit tokens. The new design is…
Print approx. €2.46–€3.01 excl. taxPreliminary estimate for one variant
A simple container I made for storing the kids' markers. There are 4 different dinosaurs imprinted on each of its sides: A Spinosaure, Triceratops, T-rex and a Stegosaurus. Friends and family liked the simplicity of the model so much, I…
Print approx. €3.96–€4.84 excl. taxPreliminary estimate for PETGSource material: PET
Pour modifier la taille de l'aimant supprimez le et rajoutez un nouveau volume négatif cylindre. La taille des miens est 18 mm de diamètre pour 5mm de haut. Il faut paramétrer le cylindre à 18,6 mm en longueur largeur et 5,1 mm en…
Print approx. €0.89–€1.08 excl. taxPreliminary estimate for one variant
When our toddler’s playgroup made St. Martin’s lanterns from empty Granini juice bottles using paint and a chestnut inside for swirling colors, I wanted to take it a step further. Our little one asked for a dinosaur lantern, so I designed…
Print approx. €0.40–€0.49 excl. taxPreliminary estimate for one variant
Tactile image of a dinosaur viewed from the side with a human for scale. Context Sciences, technology, engineering, and mathematics rely on illustrations and graphs to convey their knowledge. However, blind people are limited to texts (if…
Print approx. €0.06–€0.07 excl. taxPreliminary estimate for one variant
I made this a year ago, and I let my science teacher keep the model, so I do not have the weight or time taken for each model (i forgot how long each piece took, but the whole thing took about 5-6 hours to design, and 8-9 to print so all…
Print approx. €2.98–€3.64 excl. taxPreliminary estimate for one variant
Im Rahmen des PrintClosure-Projekts , bei dem ein Druckergehäuse gebaut wurde, habe ich diesen Einbaurahmen entwickelt. In den Rahmen kann das digitale Thermometer-Hygrometer eingeklipst werden. Der Ausschnitt hat die Abmessungen 46,5 x…
Print approx. €0.49–€0.60 excl. taxPreliminary estimate for PETGSource material: PET
Protects from items rubbing up against belt or falling down hole I modeled this for my Cobra Class 26. The blue painters tape is covering the holes where I removed the thread winder Supports necessary, sorry 13mm height above table with…
Print approx. €1.08–€1.33 excl. taxPreliminary estimate for one variant
Easy print
Print approx. €1.06–€1.30 excl. taxPreliminary estimate for one variant
This cute and simple dinosaur friend makes an excellent desk companion and comes in two different varieties, shorter and longer legs. The difference isn't massive between the two but I thought it would be best to give folks choice. In the…
Update 2 (8/22/25) It's here! Version 2.0 of the riser with tighter fitting vents that release easier and a tool hole to release the vents. I've also put in tabs to hold LED strips. Thanks to my fellow Elegoo Discord server members for…
Edit: Thank you for 15.000 Downloads! I've made a 2025 Update of the model! You can download Fünther here! I wanted to make a Flexi Dinosaur since I first saw the Flexi Rex. As my son had his birthday last week I decided this would be the…
Edit, 23. 7. 2026: Updated the MOST 1:100 version and cover image. Added MOST 1:100 description. MOST 1:100 explained MOST stands for Magnetic Open Source Toys. 1:100 is the scale. These are the rules: 1 real meter = 1 toy cm Use ∅ 5mm ×…
Update 2023-09-03: Uploaded additional variant without a drain hole This Bulbasaur Planter will decorate your window sill or sideboard or… every place! Fits: Scale 100%: Every standard 5-6 cm plant pot. Best to plant a succulent or smal…
For commercial licence and access to all my models: Patreon (https://www.patreon.com/RembStudios) Flexi T-Rex Dinosaur! A beautifully articulated model that brings a Trex to life with fully movable parts without any support. This detailed…
Update Jun 02, 2025: I removed the Printer'n Beer tag that was on the side and put it on the back. So the tag is no longer visible once installed. Update March 13, 2025: A version with a dedicated slot for each tool provided with the…
Don't believe the hype, three horns can be friends with long necks Cera! This cute and simple Triceratops dinosaur friend makes an excellent desk companion, gift for a child, or friend. They are a companion piece to my previous dinosaur…
An easier to empty poop drawer for the Elegoo Centauri Carbon. Covers the factory poop door, and a nice drawer slides out the side. Mounts with the existing poop chute screws, and one replaced chassis screw. Use an M3x10mm screw on the…
Edit: 23. 2. 2026: I published an updated version here . It's better, so you should definitely download Gertrude instead. Edit: 23. 7. 2026: The updated version is now capable of carrying a dino rider. Try it out! This is my second flexi…
Edit, 24. 7. 2026: Updated the MOST 1:100 version and edited cover image. Added MOST 1:100 description. MOST 1:100 explained MOST stands for Magnetic Open Source Toys. 1:100 is the scale. These are the rules: 1 real meter = 1 toy cm Use ∅…
Taurus V5 Final Release Part of this release in the display case for Klipper WiFi connected TFT displays, please check it out: https://www.printables.com/model/624504 We're sorry this took so long, but the V5 changes were quite drastic,…
All variant have holes for magnets 1,5x⌀10mm or you can use 2.0x⌀10mm, except for the 3x⌀6mm model. Update 12-09-2025 - Added internal model !! Prototype !! Magnetic version to be used inside, if you want to use the internal spool holder…
Cute chubby T rex - Desk Decoration
This remix arranges the eight parts of the Elegoo Centauri Carbon Riser (originally STEP files) into a single print plate for easy printing. The STL file contains the pre-arranged layout. (Note: The STL may import as a single mesh in some…
Required Stls: 1x hinge_upper 1x hinge_lower 1x arm_upper 1x arm_lower 2x nut_block *4x plastic_spacer *The plastic spacers go in the glass cutouts to align the panel and prevent the metal screw from touching the glass. Required Hardware:…
An articulated dinosaur skeleton with a removable skull. Triceratops, Styracosaurus Xenocerotops and Diablocerotops skulls included. Easy to print and should not need supports. Print with 2 or 3 walls @.16 layer height.
Do you like this 3D printable design? Want more exclusive low-poly models? Join my Printables Club! 🎁 New exclusive models every month 💸 Sell 3D prints of my designs 👀 Behind the scenes content You can alternatively join my Patreon and…
This is a tool tray designed for the Elegoo CC that mounts to the Spool side of the unit. This does Not use magnets but uses two of the CC's side panel screws to mount it. Longer screws are not needed. Note: This is an original design and…
The source marked this model as adult content.
Screen Accent for the Elegoo Centauri Carbon.
Disclaimer: These models are created with the help of AI tools, but always refined with my own ideas, prompt work, and post-processing for printability. I deeply respect traditional 3D designers and their craft, and my goal is simply to…
An articulated dinosaur skeleton with a removable skull. A T-rex, Ceratosaurus and Allosaurus style skulls are included. Easy to print and should not need supports. Print with 2 or 3 walls @.16 layer height.
This is a simple dual-bearing spool holder for the Elegoo Centauri and Centauri Carbon. Required hardware 608 bearing, x2 I strongly recommend using greased bearings. The grease provides some resistance which helps to slow down the spool…
All props to Pattersaurus on Thingiverse for this. * You'll need THREE M3 x 8mm Screws / Bolts (no nuts) to attach this to your machine. * ****PRINT ORIENTATION**** - fins and holes face down on plate: Just as the first photo, place it on…
On the new ELEGOO Centauri Carbon's the PTFE tube running into the print head is way too kinked and causes loading and printing issues. If you have one of these machines please snip the small zip tie at the end of the tube guide and…
This is a HEPA filter option for your Elegoo Centauri Carbon 3D Printer There are two print model options for you to work with Is a magnet option that works with 2mm magnets you can easily place it on the back when needed is an option…
Snap in place - Removable poop chute for the Elegoo Centauri Carbon. Poop chute which snaps in place with magnets. The poop chute “floats” and is connected to the printer, which comes in handy with the anti-vibration feet installed. No…
This is a Flexi Plesiosaurus. There are two types: star pattern and blank. You can 3D print whichever you like. Print in Place with no supports. Please take pictures of your Flexi and share them with us! Print Settings Printer Brand: QIDI…
These are dinosaur themed bookmarks. Quick and easy to print requiring no supports and minimal infill. These were made from dinosaur Meeple models by Roberth Johansson (https://www.printables.com/social/221466-roberth-johansson/models)…
I wanted a simple and quick to print tool caddy, that can hold all the included tools for the Centauri Carbon printer. Plus a pair of flush cutters. The tools are organized, with the most frequently used tools towards the front. The…
Mythosaur Skull from Star Wars, Printed On Bambu lab X1C. Scaled to fit 256x256mm build plate Used .08 Layer height no supports needed. If using .2 layer height supports recommended. . . This is the way
More design on: https://www.patreon.com/c/mortex3d PATREON: Mortex.3d Guess who just sprouted into the cutest print of the day? 🌱✨ This little bulbasaur is fresh off the printer and ready to steal hearts! Who else would totally adopt this…
I printed in PLA Infill: 15% Layer Height: 0.10mm Supports: Yes, organic If you like my work consider Buy me a coffee 😊
The model holds all the accessories. It's available in 4 variants. I would recommand printing the variant that uses the integrated screws. This is due to the weight of all the accessories. Model has been updated with better holes for the…
SE3D Toolhead Cover for Elegoo Centauri Carbon Before you grab this version, check out v2.0 . This is a redesigned toolhead cover for the Elegoo Centauri Carbon that improves both print quality and day-to-day usability. Key improvements:…
I am space limited due to a shelf above the Centauri and I plan to use it primarily for ABS / ASA prints so I used Prusa Slicer to chop off the vents but retained the angled shelf to add in led light strips. The Centauri Carbon is dark…
Assembled Dimensions (LxWxH) 167 x 30 x 67 mm (100% scale) Buildplate Dimensions (LxWxH) 114 x 117 x 1 mm (100% scale) Basic information A 26 piece Stegosaurus puzzle kit. You can either test your skill, and assemble it without any help,…
This is the free, downgraded version of Ginko the Brachiosaurus. If you want moveable legs and jaws become a Club Member or buy the final version here . Edit, 24. 7. 2026: Updated the MOST 1:100 version and edited cover image. Added MOST…
